7.6 KiB

Raw Blame History

Docker Engine managed plugin system

This document describes the plugin system available today in the experimental build of Docker 1.12:

How to operate an existing plugin
How to develop a plugin

Unlike the legacy plugin system, you now manage plugins using Docker Engine:

install plugins
start plugins
stop plugins
remove plugins

The current Docker Engine plugin system only supports volume drivers. We are adding more plugin driver types in the future releases.

For information on Docker Engine plugins generally available in Docker Engine 1.12 and earlier, refer to Understand legacy Docker Engine plugins.

How to operate a plugin

Plugins are distributed as Docker images, so develpers can host them on Docker Hub or on a private registry.

You install the plugin using a single command: docker plugin install <PLUGIN>. The plugin install command pulls the plugin from the Docker Hub or private registry. If necessary the CLI prompts you to accept any privilige requriements. For example the plugin may require access to a device on the host system. Finally it enables the plugin.

Run docker plugin ls to check the status of installed plugins. The Engine markes plugins that are started without issues as ENABLED.

After you install a plugin, the plugin behavior is the same as legacy plugins. The following example demonstrates how to install the sshfs plugin and use it to create a volume.

Install the sshfs plugin.

$ docker plugin install vieux/sshfs

Plugin "vieux/sshfs" is requesting the following privileges:
- network: [host]
- capabilities: [CAP_SYS_ADMIN]
Do you grant the above permissions? [y/N] y

vieux/sshfs

The plugin requests 2 privileges, the CAP_SYS_ADMIN capability to be able to do mount inside the plugin and host networking.

Check for a value of true the ENABLED column to verify the plugin started without error.

$ docker plugin ls

NAME                TAG                 ENABLED
vieux/sshfs         latest              true

Create a volume using the plugin.

$ docker volume create \
  -d vieux/sshfs \
  --name sshvolume \
  -o sshcmd=user@1.2.3.4:/remote

sshvolume

Use the volume sshvolume.

$ docker run -v sshvolume:/data busybox ls /data

<content of /remote on machine 1.2.3.4>

Verify the plugin successfully created the volume.
```
$ docker volume ls

DRIVER              NAME
vieux/sshfs         sshvolume
```
You can stop a plugin with the docker plugin disable command or remove a plugin with docker plugin remove.

See the command line reference for more information.

How to develop a plugin

Plugin creation is currently a manual process. We plan to add automation in a future release with a command such as docker plugin build.

This section describes the format of an existing enabled plugin. You have to create and format the plugin files by hand.

Plugins are stored in /var/lib/docker/plugins. For instance:

# ls -la /var/lib/docker/plugins
total 20
drwx------  4 root root 4096 Aug  8 18:03 .
drwx--x--x 12 root root 4096 Aug  8 17:53 ..
drwxr-xr-x  3 root root 4096 Aug  8 17:56 cd851ce43a403
-rw-------  1 root root 2107 Aug  8 18:03 plugins.json

plugins.json is an inventory of all installed plugins. For example:

# cat plugins.json
{
  "cd851ce43a403": {
    "plugin": {
      "Manifest": {
        "Args": {
          "Value": null,
          "Settable": null,
          "Description": "",
          "Name": ""
        },
        "Env": null,
        "Devices": null,
        "Mounts": null,
        "Capabilities": [
          "CAP_SYS_ADMIN"
        ],
        "ManifestVersion": "v0.1",
        "Description": "sshFS plugin for Docker",
        "Documentation": "https://docs.docker.com/engine/extend/plugins/",
        "Interface": {
          "Socket": "sshfs.sock",
          "Types": [
            "docker.volumedriver/1.0"
          ]
        },
        "Entrypoint": [
          "/go/bin/docker-volume-sshfs"
        ],
        "Workdir": "",
        "User": {},
        "Network": {
          "Type": "host"
        }
      },
      "Config": {
        "Devices": null,
        "Args": null,
        "Env": [],
        "Mounts": []
      },
      "Active": true,
      "Tag": "latest",
      "Name": "vieux/sshfs",
      "Id": "cd851ce43a403"
    }
  }
}

Each folder represents a plugin. For example:

# ls -la /var/lib/docker/plugins/cd851ce43a403
total 12
drwx------ 19 root root 4096 Aug  8 17:56 rootfs
-rw-r--r--  1 root root   50 Aug  8 17:56 plugin-config.json
-rw-------  1 root root  347 Aug  8 17:56 manifest.json

rootfs represents the root filesystem of the plugin. In this example, it was created from a Dockerfile as follows:

Note: /run/docker/plugins is mandatory for docker to communicate with the plugin._

$ git clone https://github.com/vieux/docker-volume-sshfs
$ cd docker-volume-sshfs
$ docker build -t rootfs .
$ id=$(docker create rootfs true) # id was cd851ce43a403 when the image was created
$ mkdir -p /var/lib/docker/plugins/$id/rootfs
$ docker export "$id" | tar -x -C /var/lib/docker/plugins/$id/rootfs
$ docker rm -vf "$id"
$ docker rmi rootfs

manifest.json describes the plugin and plugin-config.json contains some runtime parameters. For example:

# cat manifest.json
{
	"manifestVersion": "v0.1",
	"description": "sshFS plugin for Docker",
	"documentation": "https://docs.docker.com/engine/extend/plugins/",
	"entrypoint": ["/go/bin/docker-volume-sshfs"],
	"network": {
		   "type": "host"
		   },
		   "interface" : {
		   	       "types": ["docker.volumedriver/1.0"],
			       		"socket": "sshfs.sock"
					},
					"capabilities": ["CAP_SYS_ADMIN"]
}

In this example, you can see the plugin is a volume driver, requires the CAP_SYS_ADMIN capability, host networking, /go/bin/docker-volume-sshfs as entrypoint and is going to use /run/docker/plugins/sshfs.sock to communicate with the Docker Engine.

# cat plugin-config.json
{
  "Devices": null,
  "Args": null,
  "Env": [],
  "Mounts": []
}

This plugin doesn't require runtime parameters.

Both manifest.json and plugin-config.json are part of the plugins.json. manifest.json is read-only and plugin-config.json is read-write.

To summarize, follow the steps below to create a plugin:

Choose a name for the plugin. Plugin name uses the same format as images, for example: <repo_name>/<name>.
Create a rootfs in /var/lib/docker/plugins/$id/rootfs.
Create manifest.json file in /var/lib/docker/plugins/$id/.
Create a plugin-config.json if needed.
Create or add a section to /var/lib/docker/plugins/plugins.json. Use <user>/<name> as “Name” and $id as “Id”.
Restart the Docker Engine.
Run docker plugin ls.
- If your plugin is listed as ENABLED=true, you can push it to the registry.
- If the plugin is not listed or if ENABLED=false, something went wrong. Check the daemon logs for errors.
If you are not already logged in, use docker login to authenticate against a registry.
Run docker plugin push <repo_name>/<name> to push the plugin.

7.6 KiB Raw Blame History

Docker Engine managed plugin system

How to operate a plugin

How to develop a plugin

7.6 KiB

Raw Blame History