mirror of https://github.com/docker/cli.git
131 lines
5.4 KiB
Markdown
131 lines
5.4 KiB
Markdown
<!--[metadata]>
|
|
+++
|
|
title = "network create"
|
|
description = "The network create command description and usage"
|
|
keywords = ["network, create"]
|
|
[menu.main]
|
|
parent = "smn_cli"
|
|
+++
|
|
<![end-metadata]-->
|
|
|
|
# network create
|
|
|
|
Usage: docker network create [OPTIONS] NETWORK-NAME
|
|
|
|
Creates a new network with a name specified by the user
|
|
|
|
--aux-address=map[] Auxiliary ipv4 or ipv6 addresses used by network driver
|
|
-d --driver=DRIVER Driver to manage the Network bridge or overlay. The default is bridge.
|
|
--gateway=[] ipv4 or ipv6 Gateway for the master subnet
|
|
--help=false Print usage
|
|
--ip-range=[] Allocate container ip from a sub-range
|
|
--ipam-driver=default IP Address Management Driver
|
|
-o --opt=map[] Set custom network plugin options
|
|
--subnet=[] Subnet in CIDR format that represents a network segment
|
|
|
|
Creates a new network. The `DRIVER` accepts `bridge` or `overlay` which are the
|
|
built-in network drivers. If you have installed a third party or your own custom
|
|
network driver you can specify that `DRIVER` here also. If you don't specify the
|
|
`--driver` option, the command automatically creates a `bridge` network for you.
|
|
When you install Docker Engine it creates a `bridge` network automatically. This
|
|
network corresponds to the `docker0` bridge that Engine has traditionally relied
|
|
on. When launch a new container with `docker run` it automatically connects to
|
|
this bridge network. You cannot remove this default bridge network but you can
|
|
create new ones using the `network create` command.
|
|
|
|
```bash
|
|
$ docker network create -d bridge my-bridge-network
|
|
```
|
|
|
|
Bridge networks are isolated networks on a single Engine installation. If you
|
|
want to create a network that spans multiple Docker hosts each running an
|
|
Engine, you must create an `overlay` network. Unlike `bridge` networks overlay
|
|
networks require some pre-existing conditions before you can create one. These
|
|
conditions are:
|
|
|
|
* Access to a key-value store. Engine supports Consul, Etcd, and ZooKeeper (Distributed store) key-value stores.
|
|
* A cluster of hosts with connectivity to the key-value store.
|
|
* A properly configured Engine `daemon` on each host in the cluster.
|
|
|
|
The `docker daemon` options that support the `overlay` network are:
|
|
|
|
* `--cluster-store`
|
|
* `--cluster-store-opt`
|
|
* `--cluster-advertise`
|
|
|
|
To read more about these options and how to configure them, see ["*Get started
|
|
with multi-host network*"](../../userguide/networking/get-started-overlay.md).
|
|
|
|
It is also a good idea, though not required, that you install Docker Swarm on to
|
|
manage the cluster that makes up your network. Swarm provides sophisticated
|
|
discovery and server management that can assist your implementation.
|
|
|
|
Once you have prepared the `overlay` network prerequisites you simply choose a
|
|
Docker host in the cluster and issue the following to create the network:
|
|
|
|
```bash
|
|
$ docker network create -d overlay my-multihost-network
|
|
```
|
|
|
|
Network names must be unique. The Docker daemon attempts to identify naming
|
|
conflicts but this is not guaranteed. It is the user's responsibility to avoid
|
|
name conflicts.
|
|
|
|
## Connect containers
|
|
|
|
When you start a container use the `--net` flag to connect it to a network.
|
|
This adds the `busybox` container to the `mynet` network.
|
|
|
|
```bash
|
|
$ docker run -itd --net=mynet busybox
|
|
```
|
|
|
|
If you want to add a container to a network after the container is already
|
|
running use the `docker network connect` subcommand.
|
|
|
|
You can connect multiple containers to the same network. Once connected, the
|
|
containers can communicate using only another container's IP address or name.
|
|
For `overlay` networks or custom plugins that support multi-host connectivity,
|
|
containers connected to the same multi-host network but launched from different
|
|
Engines can also communicate in this way.
|
|
|
|
You can disconnect a container from a network using the `docker network
|
|
disconnect` command.
|
|
|
|
## Specifying advanced options
|
|
|
|
When you create a network, Engine creates a non-overlapping subnetwork for the network by default. This subnetwork is not a subdivision of an existing network. It is purely for ip-addressing purposes. You can override this default and specify subnetwork values directly using the the `--subnet` option. On a `bridge` network you can only create a single subnet:
|
|
|
|
```bash
|
|
docker network create -d --subnet=192.168.0.0/16
|
|
```
|
|
Additionally, you also specify the `--gateway` `--ip-range` and `--aux-address` options.
|
|
|
|
```bash
|
|
network create --driver=bridge --subnet=172.28.0.0/16 --ip-range=172.28.5.0/24 --gateway=172.28.5.254 br0
|
|
```
|
|
|
|
If you omit the `--gateway` flag the Engine selects one for you from inside a
|
|
preferred pool. For `overlay` networks and for network driver plugins that
|
|
support it you can create multiple subnetworks.
|
|
|
|
```bash
|
|
docker network create -d overlay
|
|
--subnet=192.168.0.0/16 --subnet=192.170.0.0/16
|
|
--gateway=192.168.0.100 --gateway=192.170.0.100
|
|
--ip-range=192.168.1.0/24
|
|
--aux-address a=192.168.1.5 --aux-address b=192.168.1.6
|
|
--aux-address a=192.170.1.5 --aux-address b=192.170.1.6
|
|
my-multihost-network
|
|
```
|
|
Be sure that your subnetworks do not overlap. If they do, the network create fails and Engine returns an error.
|
|
|
|
## Related information
|
|
|
|
* [network inspect](network_inspect.md)
|
|
* [network connect](network_connect.md)
|
|
* [network disconnect](network_disconnect.md)
|
|
* [network ls](network_ls.md)
|
|
* [network rm](network_rm.md)
|
|
* [Understand Docker container networks](../../userguide/networking/dockernetworks.md)
|