Keep frontmatter for docker, dockerd and index markdown files.
Also needs to move cli.md > docker.md before generation and
then move it back because cli.md is needed for yaml generation on docs
website: https://github.com/docker/cli/pull/3924#discussion_r1059986605
Signed-off-by: Kevin Alvarez <crazy-max@users.noreply.github.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This will generate "details_url" for options, so that the options
table on the pages at docs.docker.com link to the section describing
the option.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This replaces the use of bash where suitable, to allow easier copy/pasting
of shell examples without copying the prompt or process output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When creating and updating services, we need to avoid unneeded service churn.
The interaction of separate lists to "add" and "drop" capabilities, a special
("ALL") capability, as well as a "relaxed" format for accepted capabilities
(case-insensitive, `CAP_` prefix optional) make this rather involved.
This patch updates how we handle `--cap-add` / `--cap-drop` when _creating_ as
well as _updating_, with the following rules/assumptions applied:
- both existing (service spec) and new (values passed through flags or in
the compose-file) are normalized and de-duplicated before use.
- the special "ALL" capability is equivalent to "all capabilities" and taken
into account when normalizing capabilities. Combining "ALL" capabilities
and other capabilities is therefore equivalent to just specifying "ALL".
- adding capabilities takes precedence over dropping, which means that if
a capability is both set to be "dropped" and to be "added", it is removed
from the list to "drop".
- the final lists should be sorted and normalized to reduce service churn
- no validation of capabilities is handled by the client. Validation is
delegated to the daemon/server.
When deploying a service using a docker-compose file, the docker-compose file
is *mostly* handled as being "declarative". However, many of the issues outlined
above also apply to compose-files, so similar handling is applied to compose
files as well to prevent service churn.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Added two new modes accepted by the `--mode` flag
* `replicated-job` creates a replicated job
* `global-job` creates a global job.
* When using `replicated-job` mode, the `replicas` flag sets the
`TotalCompletions` parameter of the job. This is the total number of
tasks that will run
* Added a new flag, `max-concurrent`, for use with `replicated-job`
mode. This flag sets the `MaxConcurrent` parameter of the job, which
is the maximum number of replicas the job will run simultaneously.
* When using `replicated-job` or `global-job` mode, using any of the
update parameter flags will result in an error, as jobs cannot be
updated in the traditional sense.
* Updated the `docker service ls` UI to include the completion status
(completed vs total tasks) if the service is a job.
* Updated the progress bars UI for service creation and update to
support jobs. For jobs, there is displayed a bar covering the overall
progress of the job (the number of tasks completed over the total
number of tasks to complete).
* Added documentation explaining the use of the new flags, and of jobs
in general.
Signed-off-by: Drew Erny <derny@mirantis.com>
Service create expects the name to be passed using the
`--name` flag, not as a positional parameter
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- fix various broken links
- fix incorrect anchors
- updated links for content that moved, so that no
redirect to the new location is needed.
- touched-up Markdown;
- re-format some JSON output
- add blank line betweeen command and command output
- format "note" blocks
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
these markdown files are not consumed directly in the docs,
but only their content is included through the YAML does,
so there's no need to have these comments in them
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--host-add` flag adds a new `host:ip` mapping. Even though
adding an entry is idempotent (adding the same mapping multiple
times does not update the service's definition), it does not
_update_ an existing mapping with a new IP-address (multiple
IP-addresses can be defined for a host).
This patch removes the "or update" part from the flag's
description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Implement runRollback to not use runUpdate
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add version tag and add flag quiet to suppress progress output
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed flags from warnDetachDefault
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add detach flag on rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Create a fakeClient for service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Added unit test for rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface instead of *command.DockerCli in service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed flags from warnDetachDefault"
This reverts commit 3e4f601c8a82cc2599a755dc693409bbc47917fc.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed test.NewFakeCli instanciation
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed unused receiver
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Replaced cli by dockerCli
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed unused receiver"
This reverts commit 604ef7c13df3d019949ca81d992db501114dafce.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed last typo
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Since CLI was moved to a separate repo, these references are incorrect.
Fixed with the help of sed script, verified manually.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
If no fields related to an update config or restart policy are
specified, these structs should not be created as part of the service,
to avoid hardcoding the current defaults.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Resolve networks IDs on the client side.
Avoid filling in deprecated Spec.Networks field.
Sort networks in the TaskSpec for update stability.
Add an integration test for changing service networks.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This parameter controls the order of operations when rolling out an
update task. Either the old task is stopped before starting the new one,
or the new task is started first, and the running tasks will briefly
overlap.
This commit adds Rollout to the API, and --update-order / --rollback-order
flags to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Change "service create" and "service update" to wait until the creation
or update finishes, when --detach=false is specified. Show progress bars
for the overall operation and for each individual task (when there are a
small enough number of tasks), unless "-q" / "--quiet" is specified.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds support for placement preferences in Swarm services.
- Convert PlacementPreferences between GRPC API and HTTP API
- Add --placement-pref, --placement-pref-add and --placement-pref-rm to CLI
- Add support for placement preferences in service inspect --pretty
- Add integration test
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix tries to address the issue raised in 25696 where
it was not possible to specify `--stop-signal` for `docker service create`
and `docker service update`, in order to use special signal to stop
the container.
This fix adds `--stop-signal` and update the `StopSignal` in `Config`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 25696.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Command name should be a H1
Only Description, Examples, and Related Commands should be H2
Changed 'Related information' heading to 'Related commands' since 99% it is only linking commands
Added some examples where relevant
Signed-off-by: Misty Stanley-Jones <misty@docker.com>
This fix made several updates:
1. Update opts.MemBytes so that default value will not show up.
The reason is that in case a default value is decided by daemon,
instead of client, we actually want to not show default value.
2. Move `docker run/create/build` to use opts.MemBytes for `--shm-size`
This is to bring consistency between daemon and docker run
3. docs updates.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 29972 where
it was not possible to specify `--read-only` for `docker service create`
and `docker service update`, in order to have the container's root file
system to be read only.
This fix adds `--read-only` and update the `ReadonlyRootfs` in `HostConfig`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 29972.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Craig Osterhout
Brian Goff
Kevin Alvarez
Sebastiaan van Stijn
Albin Kerouanton
Sebastiaan van Stijn
Drew Erny
Vincent Demeester
Alexander Ryabov
Lachlan Cooper
Renaud Gaubert
Vincent Demeester
Simon Ferquel
Misty Stanley-Jones
Frieder Bluemle
Christophe Vidal
Jimmy Leger
zebrilee
Kir Kolyshkin
Dong Chen
Aaron Lehmann
Elias Faxö
erxian
Yong Tang
yupengzte
allencloud