Adds section about the hub deprecating the v1 protocol.
Adds note about intent to disable by default and remove support.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This fix updates docs for `docker info` for most recent changes.
It also made several chagnes:
1. Replace 0.12.0-dev to 0.13.0 for api docs v1.24.
2. Replace 0.13.0-dev to 0.13.0 for api docs v1.25
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This feature was reverted for docker 1.13
in c5251f7116e3d9095a7169fc31bd170dff997c2e,
so removing the documentation as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
… for `docker images`.
This deprecates the `filter` param for the `/images` endpoint and make a
new filter called `reference` to replace it. It does change the CLI
side (still possible to do `docker images busybox:musl`) but changes the
cli code to use the filter instead (so that `docker images --filter
busybox:musl` and `docker images busybox:musl` act the same).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address 27902 by adding a flag `--host`
to `docker service create` and `--host-add/--host-rm` to
`docker service update`, so that it is possible to
specify extra `host:ip` settings in `/etc/hosts`.
This fix adds `Hosts` in swarmkit's `ContainerSpec` so that it
is possible to specify extra hosts during service creation.
Related docs has been updated.
An integration test has been added.
This fix fixes 27902.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This change incorporates feedback from @thaJeztah in the PR that added
the autolock flag. It changes the descriptions to be different for
"swarm init" and "swarm update" so that the boolean nature so that the
purpose of the flag in both contexts is clearer.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is based on the comment:
https://github.com/docker/docker/pull/28147#discussion_r86996347
Previously the output string of the `DurationOpt` is `duration-ptr`
and `Uint64Opt` is `uint64-ptr`. While it is clear to developers,
for a normal user `-ptr` might not be very informative.
On the other hand, the default value of `DurationOpt` and `Uint64Opt`
has already been quite informative: `none`. That means if no flag
provided, the value will be treated as none.
(like a ptr with nil as the default)
For that reason this fix removes the `-ptr`.
Also, the output in the docs of `service create` has been quite
out-of-sync with the true output. So this fix updates the docs
to have the most up-to-date help output of `service create --help`.
This fix is related to #28147.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
See #21157 for more details.
In a future version of Docker, providing a version to API calls
will be mandatory. An implementation of this is in #27801.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
Add the following options to "swarm init" and "swarm update":
- --max-snapshots: Retain this many old Raft snapshots in addition
to the latest one
- --snapshot-interval: Number of log entries between Raft snapshots
These options already existed in SwarmKit and the Docker API but were
never exposed in the CLI. I'm adding them here to fix this oversight.
--max-snapshots may be useful for debugging purposes and more
conservative users who want to store rolling backups of old versions of
the Raft state.
--snapshot-interval is most useful for performance tuning. The default
value of 10000 may not be ideal for some setups.
There is also a LogEntriesForSlowFollowers option that is not exposed. I
decided not to expose it along with these others because I don't think
it's generally useful (and I'm not sure what I would call the CLI flag).
But if people want, I can expose it for the sake of completeness.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix adds `--dns-add`, `--dns-rm`, `--dns-opt-add`, `--dns-opt-rm`,
`--dns-search-add` and `--dns-search-rm` to `service update`.
An integration test and a unit test have been added to cover the changes in this fix.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to fix the issue raised in 24391 about allowing
custom DNS settings to service definition.
This fix adds `DNSConfig` (`Nameservers`, `Options`, `Search`) to
service definition, as well as `--dns`, `--dns-opt`, and `dns-search`
to `service create`.
An integration test has been added to cover the changes in this fix.
This fix fixes 24391.
A PR in swarmkit will be created separately.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is based on the comment in
https://github.com/docker/docker/pull/27567#discussion_r86910604
Basically, in the help output of `docker service update`, the `--xxx-add`
flags typically have plural forms while `--xxx-rm` flags have singular
forms.
This fix updates the help output for consistency.
This fix also updates the related docs in `service_update.md`.
The help output in `service_update.md` has been quite out-of-sync
with the actual output so this fix replaces the output with the
most up-to-date output.
This fix is related to #27567.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to add `--tty` to `docker service create/update`. As was
specified in 25644, `TTY` flag has been added to SwarmKit and is
already vendored.
This fix add `--tty` to `docker service create/update`.
Related document has been updated.
Additional integration tests has been added.
This fix fixes 25644.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
PR 24978 adds hint of of progress to the output of `docker build`
for 1.13, in the format of
```
Step 1/5 ...
...
Step 2/5 ...
...
```
Though some of the docs hasn't been updated.
This fix did a grep in docs and updated the related places.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the proposal raised in 27921 and add
`--cpus` flag for `docker run/create`.
Basically, `--cpus` will allow user to specify a number (possibly partial)
about how many CPUs the container will use. For example, on a 2-CPU system
`--cpus 1.5` means the container will take 75% (1.5/2) of the CPU share.
This fix adds a `NanoCPUs` field to `HostConfig` since swarmkit alreay
have a concept of NanoCPUs for tasks. The `--cpus` flag will translate
the number into reused `NanoCPUs` to be consistent.
This fix adds integration tests to cover the changes.
Related docs (`docker run` and Remote APIs) have been updated.
This fix fixes 27921.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Manager now auto-detects the address that an agent connects to the cluster
from and stores it. This is useful for many kinds of internal cluster
management tools.
Signed-off-by: Drew Erny <drew.erny@docker.com>
As for `ps`, `images`, `network ls` and `volume ls`, this makes it
possible to define a custom default format.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Allow built images to be squash to scratch.
Squashing does not destroy any images or layers, and preserves the
build cache.
Introduce a new CLI argument --squash to docker build
Introduce a new param to the build API endpoint `squash`
Once the build is complete, docker creates a new image loading the diffs
from each layer into a single new layer and references all the parent's
layers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
If user namespaces is enabled on the daemon, reveal that via docker info
by adding "userns" to the list of security options reported by the
info endpoint.
Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
It seems that `max-concurrent-downloads` and `max-concurrent-uploads`
are supported in Windows for `config.json`. Though that was not
mentioned in the docs for dockerd.md.
This fix adds the following to the example `config.json` file for Windows:
```
"max-concurrent-downloads": 3,
"max-concurrent-uploads": 5,
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
--group-add was used for specifying groups for both service create
and service update. For create it was confusing since we don't have
an existing set of groups. Instead I added --group to create, and
moved --group-add to service update only, like --group-rm
This deals with issue 27646
Signed-off-by: Lily Guo <lily.guo@docker.com>
Update flag documentation
Specify that --group, --group-add and --groupd-rm refers to
supplementary user groups
Signed-off-by: Lily Guo <lily.guo@docker.com>
Fix docs for groups and update completion scripts
Signed-off-by: Lily Guo <lily.guo@docker.com>
A HealthConfig entry was added to the ContainerSpec associated with the
service being created or updated.
Signed-off-by: Cezar Sa Espinola <cezarsa@gmail.com>
The --name flag was inadvertently added to
docker service update, but is not supported,
as it has various side-effects (e.g., existing
tasks are not renamed).
This removes the flag from the service update
command.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the issue in 24712 and add
`--env-file` file to `docker create service`.
Related documentation has been updated.
An additional integration has been added.
This fix fixes 24712.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
containers may specify these cgroup values at runtime. This will allow
processes to change their priority to real-time within the container
when CONFIG_RT_GROUP_SCHED is enabled in the kernel. See #22380.
Also added sanity checks for the new --cpu-rt-runtime and --cpu-rt-period
flags to ensure that that the kernel supports these features and that
runtime is not greater than period.
Daemon will support a --cpu-rt-runtime flag to initialize the parent
cgroup on startup, this prevents the administrator from alotting runtime
to docker after each restart.
There are additional checks that could be added but maybe too far? Check
parent cgroups to ensure values are <= parent, inspecting rtprio ulimit
and issuing a warning.
Signed-off-by: Erik St. Martin <alakriti@gmail.com>
`docker network prune` prunes unused networks, including overlay ones.
`docker system prune` also prunes unused networks.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
The following sentences (introduced in v1.11 via #21160) were misleading for Swarm mode services (>= v1.12)
For networks backed by multi-host network driver, such as Overlay,
this command also shows the container endpoints in other hosts in the
cluster. These endpoints are represented as "ep-{endpoint-id}" in the output.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This fix tries to address the issue raised in 24392 where
labels with duplicate keys exist in `docker info`, which
contradicts with the specifications in the docs.
The reason for duplicate keys is that labels are stored as
slice of strings in the format of `A=B` (and the input/output).
This fix tries to address this issue by checking conflict
labels when daemon started, and remove duplicate labels (K-V).
The existing `/info` API has not been changed.
An additional integration test has been added to cover the
changes in this fix.
This fix fixes 24392.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Currently, there's no way to restart the tasks of a service without
making an actual change to the service. This leads to us giving awkward
workarounds as in
https://github.com/docker/docker.github.io/pull/178/files, where we tell
people to scale a service up and down to restore balance, or make
unnecessary changes to trigger a restart.
This change adds a --force option to "docker service update", which
forces the service to be updated even if no changes require that.
Since rolling update parameters are respected, the user can use
"docker service --force" to do a rolling restart. For example, the
following is supported:
docker service update --force --update-parallelism 2 \
--update-delay 5s myservice
Since the default value of --update-parallelism is 1, the default
behavior is to restart the service one task at a time.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Passing {{.Networks}} to the format parameter will prompt ps to
display all the networks the container is connected to.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Keeping the current behavior for exec, i.e., inheriting
variables from main process. New variables will be added
to current ones. If there's already a variable with that
name it will be overwritten.
Example of usage: docker exec -it -e TERM=vt100 <container> top
Closes#24355.
Signed-off-by: Jonh Wendell <jonh.wendell@redhat.com>
This fix tries to add a daemon config parameter `--shutdown-timeout`
that specifies the timeout value to stop containers gracefully
(before SIGKILL). The default value is 15s.
The `--shutdown-timeout` parameter is added to daemon options and
config file. It will also be updated during daemon reload.
Additional test cases have been added to cover the change.
This fix fixes#22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This adds support for two enhancements to swarm service rolling updates:
- Failure thresholds: In Docker 1.12, a service update could be set up
to either pause or continue after a single failure occurs. This adds
an --update-max-failure-ratio flag that controls how many tasks need to
fail to update for the update as a whole to be considered a failure. A
counterpart flag, --update-monitor, controls how long to monitor each
task for a failure after starting it during the update.
- Rollback flag: service update --rollback reverts the service to its
previous version. If a service update encounters task failures, or
fails to function properly for some other reason, the user can roll back
the update.
SwarmKit also has the ability to roll back updates automatically after
hitting the failure thresholds, but we've decided not to expose this in
the Docker API/CLI for now, favoring a workflow where the decision to
roll back is always made by an admin. Depending on user feedback, we may
add a "rollback" option to --update-failure-action in the future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix tries to add a flag `--stop-timeout` to specify the timeout value
(in seconds) for the container to stop before SIGKILL is issued. If stop timeout
is not specified then the default timeout (10s) is used.
Additional test cases have been added to cover the change.
This fix is related to #22471. Another pull request will add `--shutdown-timeout`
to daemon for #22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Allow passing --storage-opt size=X to docker create/run commands
for the `overlay2` graphriver.
The size option is only available if the backing fs is xfs that is
mounted with the `pquota` mount option.
The user can pass any size less then the backing fs size.
Signed-off-by: Amir Goldstein <amir73il@aquasec.com>
Fedora 22 reached end of life on July 19th, and
will no longer receive updates;
https://fedoramagazine.org/fedora-22-end-of-life-2016-july/
With the recent release of Fedora 24, Fedora 22 will officially enter End Of
Life (EOL) status on July 19th, 2016. After July 19th, all packages in the
Fedora 22 repositories will no longer receive security, bugfix, or enhancement
updates, and no new packages will be added to the Fedora 22 collection.
Upgrading to Fedora 23 or Fedora 24 before July 19th 2016 is highly recommended
for all users still running Fedora 22.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some frontmatter such as the weights, menu stuff, etc is no longer used
'draft=true' becomes 'published: false'
Signed-off-by: Misty Stanley-Jones <misty@docker.com>
This information was added in
1efc940e6f547760e5e8f4648acb120ff19fdc58,
but removed again in
a271eaeba224652e3a12af0287afbae6f82a9333
to make the help-output fit in a 80-chars
terminal.
This adds the available options again
in the help output, and updates the CLI
reference documentation to match actual
output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Linux kernel 4.3 and later supports "ambient capabilities" which are the
only way to pass capabilities to containers running as a non root uid.
Previously there was no way to allow containers not running as root
capabilities in a useful way.
Fix#8460
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
When sending a build context to a remote server it may be
(significantly) advantageous to compress the build context. This commit
adds support for gz compression when constructing a build context
using a command like "docker build --compress ."
Signed-off-by: Paul Kehrer <paul.l.kehrer@gmail.com>
As is specified in 26964, it is possible to specify
a filter based on the node name or node ID.
This fix updates the related docs for that.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix updates docs for `service ps` as now the TASK ID part has been
removed.
Also, this fix fixes several incorrect sample output.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The daemon is in a separate (dockerd) binary
since docker 1.12, so should no longer be
used.
This marks the command as deprecated, and
adds it to the deprecated features list.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit updates documentation and change log to include
the preliminary validation of the dockerfile before instructions
in dockerfile is run one-by-one.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Allows the user to use `pretty` as the format string.
This enables users to put custom format options into their CLI config
just like is supported for `docker ps` and `docker images`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This adds a small C binary for fighting zombies. It is mounted under
`/dev/init` and is prepended to the args specified by the user. You
enable it via a daemon flag, `dockerd --init`, as it is disable by
default for backwards compat.
You can also override the daemon option or specify this on a per
container basis with `docker run --init=true|false`.
You can test this by running a process like this as the pid 1 in a
container and see the extra zombie that appears in the container as it
is running.
```c
int main(int argc, char ** argv) {
pid_t pid = fork();
if (pid == 0) {
pid = fork();
if (pid == 0) {
exit(0);
}
sleep(3);
exit(0);
}
printf("got pid %d and exited\n", pid);
sleep(20);
}
```
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Because we standardize on using a non-privileged
prompt (`$`) instead of `#`, replacing the
examples to use `sudo` instead to indicate
this has to be run as root.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "format" example got lost during the
rewrite of the documentation for Cobra. This
restores the missing example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Several other places in the document it states that when using the shell
form of ENTRYPOINT, CMD and command line arguments are ignored. That is
accurate, this table was not. It is now.
Signed-off-by: David Dooling <dooling@gmail.com>
The restriction is no longer necessary given changes at the runc layer
related to mount options of the rootfs. Also cleaned up the docs on
restrictions left for userns enabled mode. Re-enabled tests related to
--read-only when testing a userns-enabled daemon in integration-cli.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This may take some time, but start by pointing people at
LABEL instead.
MAINTAINER predates general LABEL and has basically no tooling,
only allows a single item to be added, and is has been
unofficially deprecated for some time, with many images not
including it, but we have never specifically said that it
should be replaced by LABEL as a better more generic metadata
solution.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
The indexing of steps in the output of `docker build` starts with `Step 1`.
However, there are several places in the docs that start with `Step 0`.
This fix addresses the issue and changes `Step 0` to `Step 1` (and subsequent steps).
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
When xfs filesystem is being used on top of thin pool, xfs can get ENOSPC
errors from thin pool when thin pool is full. As of now xfs retries the
IO and keeps on retrying and does not give up. This can result in container
application being stuck for a very long time. In fact I have seen instances
of unkillable processes. So that means once thin pool is full and process
gets stuck, container can't be stopped/killed either and only option left
seems to be power recycle of the box.
In another instance, writer did not block but failed after a while. But
when I tried to exit/stop the container, unmounting xfs hanged and only
thing I could do was power cycle the machine.
Now upstream kernel has committed patches where it allows user space to
customize user space behavior in case of errors. One of the knobs is
max_retries, which specifies how many times an IO should be retried
when ENOSPC is encountered.
This patch sets provides a tunable knob (dm.xfs_nospace_max_retries) so
that user can specify value for max_retries and tune xfs behavior. If
one sets this value to 0, xfs will not retry IO when ENOSPC error is
encountered. It will instead give up and shutdown filesystem.
This knob can be useful if one is running into unkillable
processes/containers issue on top of xfs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
As is raised in 26312, in `docker network ls`, the help output was
mistaken to `volume names`:
```
-q, --quiet Only display volume names
```
This fix changes the help output to:
```
-q, --quiet Only display network IDs
```
This fix also updates the documentation in:
`docs/reference/commandline/network_ls.md`
This fix fixes 26312.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 25304 to support
`--group-add` and `--group-rm` in `docker service create`.
This fix adds `--group-add` to `docker service create` and `docker service update`,
adds `--group-rm` to `docker service update`.
This fix updates docs for `docker service create` and `docker service update`:
1. Add `--group-add` to `docker service create` and `docker service update`
2. Add `--group-rm` to `docker service update`
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Since 20848 has been merged and both `docker create` and
`docker run` share the same `runconfig` parser, now both
`docker run` and `docker create` allow to specify the
`--rm` flag. However, docs for `docker create` has not
been udpated yet.
This fix updates docs for `docker create` so that `--rm`
flag has been included.
This fix is related to 20848 and 25577.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Add sentece to RUN, CMD, and ENTRYPOINT exec sections making it clear
that it is the shell doing the environment variable expansion.
Signed-off-by: David Dooling <dooling@gmail.com>
The Dockerfile parser does not subsitute ENV variables in any form of
the ENTRYPOINT command. Any substitution, if done, is done by the shell
when the command is executed.
Signed-off-by: David Dooling <dooling@gmail.com>
This fix tries to address the issue in raised #23367 where an out-of-band
volume driver deletion leaves some data in docker. This prevent the
reuse of deleted volume names (by out-of-band volume driver like flocker).
This fix adds a `--force` field in `docker volume rm` to forcefully purge
the data of the volume that has already been deleted.
Related documentations have been updated.
This fix is tested manually with flocker, as is specified in #23367.
An integration test has also been added for the scenario described.
This fix fixes#23367.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This flag has been deprecated in version below 1.10 so it's safe to
remove now, according to our deprecation policy.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This feature was added in docker 1.8, through
7491f9a9c11ad3fd3b587fa6f7e53b297b3b88c7.
However, the API docs ended up in the wrong
API version (1.19 instead of 1.20), so were
never included in future API docs.
Also, the CLI docs got lost during splitting
up the cli.md docs into separate files;
561bfb268de3c674b04d48895b7e46ae890ef795
This moves the API docs to the correct
versions, and restores the CLI documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"--restart" and "--rm" are conflict options, if a container is started
with AutoRemove flag, we should forbid the update action for its Restart
Policy.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This filter option was added in be045ee2da7c2c83e859d86cb496e86ec6de8566,
but didn't update the documentation and
man pages.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This example was added in b0b2f979c7c43e2975d5e39340c168da2da42d1d,
but got lost during splitting up the cli.md docs into separate files;
561bfb268de3c674b04d48895b7e46ae890ef795
This restores the missing example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The export command operates on containers, not images, so it should be listed under the container commands, not the image commands.
Signed-off-by: David Lechner <david@lechnology.com>
These flags were not supported (daemon returns an error), and it was an
oversight. They were not present in completion scripts.
Signed-off-by: Tibor Vass <tibor@docker.com>
This fix updates docs so that log-opts takes map (`{}`) instead
of `[]`, as is defined in the impmenetation (`map[string]string`)
This fix fixes 22311.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
commit 41d580c7a610d8111dc63353cbd94319ca854627 added
"Joined at" to the output of node inspect,
but I forgot that docs changes are needed.
This change updates the example output
of node inspect in the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Following #22729, enable to dynamically reload/remove the daemon
authorization plugins (via standard reloading mechanism).
https://docs.docker.com/engine/reference/commandline/daemon/#daemon-
configuration-file
Daemon must store a reference to the authorization middleware to refresh
the plugin on configuration changes.
Signed-off-by: Liron Levin <liron@twistlock.com>
Derek McGowan
Vincent Demeester
bbayani
Boaz Shuster
Riyaz Faizullabhoy
Yong Tang
Sebastiaan van Stijn
yuexiao-wang
John Howard
lixiaobing10051267
Anusha Ragunathan
Akihiro Suda
Victor Vieux
Andrea Luzzardi
Aaron Lehmann
allencloud
Steve Durrheimer
erxian
Santhosh Manohar
Evan Hazlett
Ben Firshman
milindchawre
Alicia Lauerman
Josh Horwitz
yupeng
Darren Stahl
Antonio Murdaca
Nikolay Milovanov
Gaetan de Villele
Drew Erny
Michael Crosby
Brian Goff
Addam Hardy
Qiang Huang
Josh Horwitz
Phil Estes
Lily Guo
Cezar Sa Espinola
Ce Gao
Erik St. Martin
Leo Gallucci
sandyskies
Kenfe-Mickael Laventure
Misty Stanley-Jones
Jonh Wendell
Ding Fei
Luca Favatella
Amir Goldstein
John Mulhausen
Alicia Lauerman
Tonis Tiigi
Justin Cormack
Paul Kehrer
Jeff Silberman
Alessandro Boch
Josh Bodah
David Dooling
Charles Smith
Richard Mathie
zhouhao
frosforever
Vivek Goyal
unclejack
ohmystack
Kris-Mikael Krister
Kara Alexandra
Arnaud Porterie (icecrime)
Rich Moyse
Mihai Borobocea
timfeirg
Zhang Wei
David Lechner
Lei Jitang
Tibor Vass
Liron Levin