Using this option on the daemon will now produce an error (flag will
be removed entirely in v26.0).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Related to https://github.com/moby/moby/pull/46853
Co-Authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This driver has been deprecated and removed because the service
is no longer operational. Update the deprecated features docs to
mention it's been fully removed in Docker v25.0.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This driver has been deprecated and removed because the service
is no longer operational. Remove it from the sample output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The service has been discontinued on November 15, 2022:
> Dear Logentries user,
>
> We have identified you as the owner of, or collaborator of, a Logentries
> account.
>
> The Logentries service will be discontinued on November 15th, 2022. This
> means that your Logentries account access will be removed and all your
> log data will be permanently deleted on this date.
>
> Next Steps
> If you are interested in an alternative Rapid7 log management solution,
> InsightOps will be available for purchase through December 16th, 2022.
> Please note, there is no support to migrate your existing Logentries
> account to InsightOps.
>
> Thank you for being a valued user of Logentries.
>
> Thank you,
> Rapid7 Customer Success
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Create an easier to digest introduction to container networking,
move the bulk of information to the networking overview page.
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
commit 304c100ed2 updated the deprecation
status for these options, but forgot to update the status in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 5d6612798a updated the deprecation
status for devicemapper to "removed", but forgot to update the status
in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#4648
Make it easier to specify IPv6 addresses in the '--add-host' option by
permitting 'host=ip' in addition to 'host:ip', and allowing square
brackets around the address.
For example:
--add-host=my-hostname:127.0.0.1
--add-host=my-hostname:::1
--add-host=my-hostname=::1
--add-host=my-hostname:[::1]
To avoid compatibility problems, the CLI will replace an '=' separator
with ':', and strip brackets, before sending the request to the API.
Signed-off-by: Rob Murray <rob.murray@docker.com>
"By default" implies that this is something which could be
disabled for an individual `docker exec` call. This doesn't seem
to be the case, so removing the "by default" part would make
these docs clearer to me.
Signed-off-by: Per Lundberg <per.lundberg@hibox.tv>
- updates fc6976db45
- updates 74bace156c
Commit fc6976db45 introduced support for the
`bind-recursive` option on `--mount`, and deprecated the `bind-nonrecursive`
option. Unlike `bind-nonrecursive` boolean, the `bind-recursive` option
accepts a string value with multiple options.
For convenience, the `bind-recursive` option also was made to accept boolean
values (true/false, 1/0). However, as the option works as the _reverse_ of
`bind-nonrecursive` (`bind-nonrecursive=true` === `bind-recursive=false`),
the new option won't be a "drop-in" replacement, and having more options
to choose from may only be adding more complexity / cognitive overload.
This patch removes support for boolean values; if we see a need to add
support for boolean values in future, it would be trivial to add back this
functionality.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This attempts to make it clearer that the --cgroup-parent option is only used
for the containers used during build. Instead of mentioning "build container",
I opted for using "RUN instructions" (to match the --network description),
although this may not be ideal (as it assumes the "Dockerfile" front-end, which
of course may not be the case).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In previous versions of the Docker API, `system prune --volumes` and `volume prune`
would remove all dangling volumes. With API v1.42, this was changed so that only
anonymous volumes would be removed unless the all filter was specified.
Some of the docs were updated in #4218, however, there were a couple of places
left that didn't make the anonymous vs named volumes distinction clear.
This replaces #4079, which was bitrotted by #4218. See also #4028.
Closes#4079.
Signed-off-by: Ed Morley <501702+edmorley@users.noreply.github.com>
The IsAutomated field is being deprecated by Docker Hub's search API and
will always be "false" in future.
This patch:
- Deprecates the field and the related "is-automated" filter
- Removes the "AUTOMATED" column from the default output of "docker search"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The flag-set that was returned is a pointer to the command's Flags(), which
is in itself passed by reference (as it is modified / set up).
This patch removes the flags return, to prevent assuming it's different than
the command's flags.
While SetupRootCommand is exported, a search showed that it's only used internally,
so changing the signature should not be a problem.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit c846428cb6 added proxies to the
example `daemon.json`, based on the implementation that was added in
427c7cc5f8.
However, a follow-up pull request changed the proxy-configuration in`daemon.json`
to nest the configuration in a "proxies" struct, and the documentation was
not updated accordingly; see:
101dafd049
This patch fixes the example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit de8b696ed6 removed the patch
releases from the deprecation doc, but when we switched to the
SemVer(ish) format for v23.0, we accidentally added them back.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `~/.dockercfg` file was replaced by `~/.docker/config.json` in 2015
(github.com/docker/docker/commit/18c9b6c6455f116ae59cde8544413b3d7d294a5e).
Commit b83bc67136 (v23.0.0, but backported to
v20.10) added a warning if no "current" config file was found but a legacy
file was, and if the CLI would fall back to using the deprecated file.
Commit ee218fa89e removed support for the
legacy file, but kept a warning in place if a legacy file was in place,
and now ignored.
This patch removes the warning as well, fully deprecating the legacy
`~/.dockercfg` file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `oom-score-adjust` option was added to prevent the daemon from being
OOM-killed before other processes. This option was mostly added as a
convenience, as running the daemon as a systemd unit was not yet common.
Having the daemon set its own limits is not best-practice, and something
better handled by the process-manager starting the daemon.
Docker v20.10 and newer no longer adjust the daemon's OOM score by default,
instead setting the OOM-score to the systemd unit (OOMScoreAdjust) that's
shipped with the packages.
Users currently depending on this feature are recommended to adjust the
daemon's OOM score using systemd or through other means, when starting
the daemon.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For moby/moby PR 45025 (Docker v24, API v1.43).
`docker run --annotation foo=bar` is similar to `podman run --annotation foo=bar`,
however, unlike Podman, Docker implementation also accepts an annotation with an empty value.
(`docker run --annotation foo`)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The IndexServerAddress field was as part of the initial Windows implementation
of the engine. For legal reasons, Microsoft Windows (and thus Docker images
based on Windows) were not allowed to be distributed through non-Microsoft
infrastructure. As a temporary solution, a dedicated "registry-win-tp3.docker.io"
registry was created to serve Windows images.
Currently, this field always shows "https://index.docker.io/v1/", which is
confusing, because that address is not used for the registry (only for
authentication and "v1" search).
docker info
...
Registry: https://index.docker.io/v1/
Starting with b4ca1c7368, this field is also
no longer used during authentication, and a3d56e7d06
removed the (deprecated) ElectAuthServer() which was previously used to
query it.
Given that there's currently no practical use for this information, and
it only adds "noise" (and confusion), this patch removes it from the default
output.
For now, the field is (still) available for those that want to use it;
docker info --format '{{.IndexServerAddress}}'
https://index.docker.io/v1/
But it won't be printed by default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
No need to mention that the env-var may be removed at that point to keep
the description more to-the-point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for this environment variable was removed in docker 23.0 in
1240f8b41d
From that patch:
> All regular, non-EOL Linux distros now come with more recent kernels
> out of the box. There may still be users trying to run on kernel 3.10
> or older (some embedded systems, e.g.), but those should be a rare
> exception, which we don't have to take into account.
>
> This patch removes the kernel version check on Linux, and the corresponding
> DOCKER_NOWARN_KERNEL_VERSION environment that was there to skip this
> check.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch adds additional information to the Client section of the output.
We were already outputting versions of CLI Plugins, and the Server, but not
for the Client.
Adding this information can help with bug-reports where the reporter only
provided the `docker info` output, or (e.g.) only `docker --version`. The
platform name helps identify what kind of builds the user has installed
(e.g. docker's docker-ce packages have "Docker Engine - Community" set
for this), although we should consider including "packager" information
as a more formalized field for this information.
Before this patch:
$ docker info
Client:
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.10.4
Path: /usr/libexec/docker/cli-plugins/docker-buildx
...
With this patch applied:
$ docker info
Client: Docker Engine - Community
Version: 24.0.0-dev
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.10.4
Path: /usr/libexec/docker/cli-plugins/docker-buildx
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --format=json option was added for all inspect commands, but was not
implemented for "docker version". This patch implements the missing option.
Before this patch:
docker version --format=json
json
With this patch:
docker version --format=json
{"Client":{"Platform":{"Name":""},"Version":"24.0.0-dev","ApiVersion":"..."}}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --format=json option was added for all inspect commands, but was not implemented
for "docker info". This patch implements the missing option.
Before this patch:
docker info --format=json
json
With this patch applied:
docker info --format=json
{"ID":"80c2f18a-2c88-4e4a-ba69-dca0eea59835","Containers":7,"ContainersRunning":"..."}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Edited second paragraph under ### Daemon configuration file to change "regardless their value" to "regardless of their value"
Signed-off-by: Jake Stokes <contactjake@developerjake.com>
Lifubang
QQ喵
Chris Chinchilla
Sebastiaan van Stijn
Albin Kerouanton
David Karlsson
Craig Osterhout
Sebastiaan van Stijn
robmry
TheRealGramdalf
Per Lundberg
Hugo Chastel
saurabh
Sam Thibault
Akihiro Suda
Ed Morley
Brian Goff
Zhiwei Liang
David Karlsson
A. Lester Buck III
Jake Stokes
Jakub Panek
Paweł Gronowski
Bjorn Neergaard
Aslam Ahemad
Ali Rostami
Yucheng Wu
CrazyMax