Document feature option 'windows-dns-proxy', which can be used to
enable or disable forwarding of DNS requests from the daemon's
internal resolver to external servers.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Mark pulling legacy image formats as deprecated, and describe the
DOCKER_ENABLE_DEPRECATED_PULL_SCHEMA_1_IMAGE environment variable.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Added a description of a '--internal' network (from @neersighted).
Co-authored-by: Bjorn Neergaard <bjorn.neergaard@docker.com>
Signed-off-by: Rob Murray <rob.murray@docker.com>
Replace 'docker daemon' with the wording used for the preceeding table,
to make it extra-clear that those flags apply to the default bridge.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Added --detach/-d to stack rm. Setting --detach=false waits until
all of the stack tasks have reached a terminal state.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: George Margaritis <gmargaritis@protonmail.com>
Added --detach and --quiet/-q flags to stack deploy. Setting --detach=false
waits until all of the stack services have converged. Shows progress bars for
each individual task, unless --quiet/-q is specified.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: George Margaritis <gmargaritis@protonmail.com>
CLI reference for the base command was generated to cli.md
Changed it to docker.md to handle broken links.
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
Alias pages redirect to the canonical names, but these pages still
linked to the aliases, causing broken links when building the docs site.
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
- Add section about cdi-spec-dirs daemon configuration
- Add subsection about cdi in --device section for docker run
- Update `docker info` output example
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
The Docker daemon provides a versioned API for backward compatibility with old
clients. Docker clients can perform API-version negotiation to select the most
recent API version supported by the daemon (downgrading to and older version of
the API when necessary). API version negotiation was introduced in Docker v1.12.0
(API 1.24), and clients before that used a fixed API version.
Docker Engine versions through v25.0 provide support for all [API versions](https://docs.docker.com/engine/api/#api-version-matrix)
included in stable releases for a given platform. For Docker daemons on Linux,
the earliest supported API version is 1.12 (corresponding with Docker Engine
v1.0.0), whereas for Docker daemons on Windows, the earliest supported API
version is 1.24 (corresponding with Docker Engine v1.12.0).
Support for legacy API versions (providing old API versions on current versions
of the Docker Engine) is primarily intended to provide compatibility with recent,
but still supported versions of the client, which is a common scenario (the Docker
daemon may be updated to the latest release, but not all clients may be up-to-date
or vice versa). Support for API versions before that (API versions provided by
EOL versions of the Docker Daemon) is provided on a "best effort" basis.
Use of old API versions is very rare, and support for legacy API versions
involves significant complexity (Docker 1.0.0 having been released 10 years ago).
Because of this, we'll start deprecating support for legacy API versions.
Docker Engine v25.0 by default disables API version older than 1.24 (aligning
the minimum supported API version between Linux and Windows daemons). When
connecting with a client that uses an API version version older than 1.24,
the daemon returns an error. The following example configures the docker
CLI to use API version 1.23, which produces an error:
DOCKER_API_VERSION=1.23 docker version
Error response from daemon: client version 1.23 is too old. Minimum supported API version is 1.24, please upgrade your client to a newer version
An environment variable (`DOCKER_MIN_API_VERSION`) is introduced that allows
re-enabling older API versions in the daemon. This environment variable must
be set in the daemon's environment (for example, through a [systemd override
file](https://docs.docker.com/config/daemon/systemd/)), and the specified
API version must be supported by the daemon (`1.12` or higher on Linux, or
`1.24` or higher on Windows).
Support for API versions lower than `1.24` will be permanently removed in Docker
Engine v26, and the minimum supported API version will be incrementally raised
in releases following that.
We do not recommend depending on the `DOCKER_MIN_API_VERSION` environment
variable other than for exceptional cases where it's not possible to update
old clients, and those clients must be supported.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Slightly rephrase the intro (remove "easy reference"), and cross-reference
the corresponding section on the docker CLI page.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker v23.0 and up allow the daemon to be configured to have seccomp disabled
by default (using the "unconfined" profile as default), and introduced a new
"builtin" profile-name for the default (see [moby@f8795ed364586acd][1] and
[mnoby@ac449d6b5ad29a50][2]).
However, the CLI had no special handling for the "builtin" profile, which
resulted in it trying to load it as a file, which would fail;
docker run -it --rm --security-opt seccomp=builtin busybox
docker: opening seccomp profile (builtin) failed: open builtin: no such file or directory.
See 'docker run --help'.
This patch adds a special case for the "builtin" profile, to allow using the
default profile on daemons with seccomp disabled (unconfined) by default.
[1]: f8795ed364
[2]: ac449d6b5a
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Using this option on the daemon will now produce an error (flag will
be removed entirely in v26.0).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Related to https://github.com/moby/moby/pull/46853
Co-Authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This driver has been deprecated and removed because the service
is no longer operational. Update the deprecated features docs to
mention it's been fully removed in Docker v25.0.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This driver has been deprecated and removed because the service
is no longer operational. Remove it from the sample output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The service has been discontinued on November 15, 2022:
> Dear Logentries user,
>
> We have identified you as the owner of, or collaborator of, a Logentries
> account.
>
> The Logentries service will be discontinued on November 15th, 2022. This
> means that your Logentries account access will be removed and all your
> log data will be permanently deleted on this date.
>
> Next Steps
> If you are interested in an alternative Rapid7 log management solution,
> InsightOps will be available for purchase through December 16th, 2022.
> Please note, there is no support to migrate your existing Logentries
> account to InsightOps.
>
> Thank you for being a valued user of Logentries.
>
> Thank you,
> Rapid7 Customer Success
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Create an easier to digest introduction to container networking,
move the bulk of information to the networking overview page.
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
commit 304c100ed2 updated the deprecation
status for these options, but forgot to update the status in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 5d6612798a updated the deprecation
status for devicemapper to "removed", but forgot to update the status
in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#4648
Make it easier to specify IPv6 addresses in the '--add-host' option by
permitting 'host=ip' in addition to 'host:ip', and allowing square
brackets around the address.
For example:
--add-host=my-hostname:127.0.0.1
--add-host=my-hostname:::1
--add-host=my-hostname=::1
--add-host=my-hostname:[::1]
To avoid compatibility problems, the CLI will replace an '=' separator
with ':', and strip brackets, before sending the request to the API.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Albin Kerouanton
Rob Murray
Bjorn Neergaard
David Karlsson
Paweł Gronowski
Sebastiaan van Stijn
Sebastiaan van Stijn
George Margaritis
Chris Chinchilla
Lifubang
QQ喵
Chris Chinchilla
Craig Osterhout
robmry