This add a new filter to 'docker network ls'
to allow filtering by driver-name.
Contrary to "ID" and "name" filters, this
filter only supports an *exact* match.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch did following:
1) Make filter check logic same as `docker ps ` filters
Right now docker container logic work as following:
when same filter used like below:
-f name=jack -f name=tom
it would get all containers name is jack or tom(it is or logic)
when different filter used like below:
-f name=jack -f id=7d1
it would get all containers name is jack and id contains 7d1(it is and logic)
It would make sense in many user cases, but it did lack of compliate filter cases,
like "I want to get containers name is jack or id=7d1", it could work around use
(get id=7d1 containers' name and get name=jack containers, and then construct the
final containers, they could be done in user side use shell or rest API)
2) Fix one network filter bug which could include duplicate result
when use -f name= -f id=, it would get duplicate results
3) Make id filter same as container id filter, which means match any string.
not use prefix match.
It is for consistent match logic
Closes: #21417
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
The `Status` field is a `map[string]interface{}` which allows the driver to pass
back low-level details about the underlying volume.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Copy edit the content
Updates to existing material
Adding mbentley's comments
Updating with last minute comments
Update with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
The documentation already says the cache miss happens only at `ARG`
variable usage, not declaration, but there is a very common implicit
usage: `RUN`, which this commit documents even more, improving on #21790.
Also, use `definition` instead of `declaration`: it's the same thing, and
`definition` is already used in this documentation, contrary to
`declaration`.
Also, distinguish between "instructions" and "variables defined by `ARG`
instructions".
Signed-off-by: Thomas Riccardi <riccardi@systran.fr>
This fix tries to fix the discrepancy between `docker stats` and
`docker run` where `docker run` uses RAMInBytes for all memory
related inputs but `docker stats` uses HumanSize for all memory
related outputs.
To be consistent, `docker stats` needs to use BytesSize for all
memory related outputs to conform to RAMInBytes in `docker run`.
This fix addresses this issue. As BytesSize is used, the test
cases needs to be adjusted to match `KiB/MiB/GiB` instead of
`KB/MB/GB`.
The documentation has also been updated.
This fix fixes#21765.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Following the discussion in #21556, adding a short description of the
default user authentication mechanism (without requiring authentication
plugins)
Signed-off-by: Liron Levin <liron@twistlock.com>
Auto-creation of host-directories was marked deprecated in
Docker 1.9, but was decided to be too much of an backward-incompatible
change, so it was decided to keep the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
runc expects a systemd cgroupsPath to be in slice:scopePrefix:containerName
format and the "--systemd-cgroup" option to be set. Update docker accordingly.
Fixes 21475
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
It was suggested to me that documentation for "docker pull" and "docker
push" should reference "docker login", to make clearer how to specify
credentials for a push or pull operation. Add a note to the manual pages
and reference documentation explaining how registry credentials are
managed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This change include filter `name` and `driver`,
and also update related docs to reflect that filters usage.
Closes: #21243
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Now that the namespace sharing code via runc is vendored with the
containerd changes, we can disable the restrictions on container to
container net and IPC namespace sharing when the daemon has user
namespaces enabled.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This allows a user to specify explicitly to enable
automatic copying of data from the container path to the volume path.
This does not change the default behavior of automatically copying, but
does allow a user to disable it at runtime.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The form "Save an images" is not correct.
Either "Save an image" or "Save images" work, but since
the save commands accepts multiple images, I chose the
latter.
Fixed in all places where I could grep "Save an image(s)".
Signed-off-by: Martin Mosegaard Amdisen <martin.amdisen@praqma.com>
This fix updates the Plugin API docs to cover the case of remote
plugins which could be deployed on a host different from the
docker host, through spec or json files.
This fix closes#20188.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The old examples no longer worked due to changes in
the client and Docker Hub.
This updates the "docker pull" documentation and
adds more examples and explanation of the features.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker creates a UTS namespace by default, even with --net=host, so it
is reasonable to let the user set the hostname. Note that --hostname is
forbidden if the user specifies --uts=host.
Closes#12076
Signed-off-by: Jason Heiss <jheiss@aput.net>
Once thin pool gets full, bad things can happen. Especially in case of xfs
it is possible that xfs keeps on retrying IO infinitely (for certain kind
of IO) and container hangs.
One way to mitigate the problem is that once thin pool is about to get full,
start failing some of the docker operations like pulling new images or
creation of new containers. That way user will get warning ahead of time
and can try to rectify it by creating more free space in thin pool. This
can be done either by deleting existing images/containers or by adding more
free space to thin pool.
This patch adds a new option dm.min_free_space to devicemapper graph
driver. Say one specifies dm.min_free_space=10%. This means atleast
10% of data and metadata blocks should be free in pool before new device
creation is allowed, otherwise operation will fail.
By default min_free_space is 10%. User can change it by specifying
dm.min_free_space=X% on command line. A value of 0% will disable the
check.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Following #19995 and #17409 this PR enables skipping userns re-mapping
when creating a container (or when executing a command). Thus, enabling
privileged containers running side by side with userns remapped
containers.
The feature is enabled by specifying ```--userns:host```, which will not
remapped the user if userns are applied. If this flag is not specified,
the existing behavior (which blocks specific privileged operation)
remains.
Signed-off-by: Liron Levin <liron@twistlock.com>
Update unit test and documentation to handle the new case where Username
is set to <token> to indicate an identity token is involved.
Change the "Password" field in communications with the credential helper
to "Secret" to make clear it has a more generic purpose.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Prior to this change, the "docker network inspect" contains only the
endpoints that have active local container. This excludes all the remote
and stale endpoints. By including all the endpoints, it makes debugging
much simpler and also allows the user to cleanup any stale endpoints
using "docker network disconnect -f {network} {endpoint-name}".
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Allows users to submit options similar to the `mount` command when
creating a volume with the `local` volume driver.
For example:
```go
$ docker volume create -d local --opt type=nfs --opt device=myNfsServer:/data --opt o=noatime,nosuid
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Move the note more up, to prevent people from starting
the daemon with --userns-remap before touching the files.
Also clarify that these steps must be done *before* enabling
userns-remap and starting the daemon.
Also fixed some minor Markup formatting issues.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
This change implements communication with an external credentials store,
ala git-credential-helper. The client falls back the plain text store,
what we're currently using, if there is no remote store configured.
It shells out to helper program when a credential store is
configured. Those programs can be implemented with any language as long as they
follow the convention to pass arguments and information.
There is an implementation for the OS X keychain in https://github.com/calavera/docker-credential-helpers.
That package also provides basic structure to create other helpers.
Signed-off-by: David Calavera <david.calavera@gmail.com>
There are five options 'debug' 'labels' 'cluster-store' 'cluster-store-opts'
and 'cluster-advertise' that can be reconfigured, configure any of these
options should not affect other options which may have configured in flags.
But this is not true, for example, I start a daemon with -D to enable the
debugging, and after a while, I want reconfigure the 'label', so I add a file
'/etc/docker/daemon.json' with content '"labels":["test"]' and send SIGHUP to daemon
to reconfigure the daemon, it work, but the debugging of the daemon is also diabled.
I don't think this is a expeted behaviour.
This patch also have some minor refactor of reconfiguration of cluster-advertiser.
Enable user to reconfigure cluster-advertiser without cluster-store in config file
since cluster-store could also be already set in flag, and we only want to reconfigure
the cluster-advertiser.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
- Allow to filter containers by volume with `--filter volume=name` and `filter volume=/dest`.
- Show their names in the list with the custom format `{{ .Mounts }}`.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Add `--restart` flag for `update` command, so we can change restart
policy for a container no matter it's running or stopped.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
- It reverts fa163f5619bb01cabca1c21 plus a small change
in order to allow passing the global scope datastore
to libnetwork after damon boot.
Signed-off-by: Alessandro Boch <aboch@docker.com>
In new content addressable model, image no longer
have virtual size column, it is now 'size'. So we
need to update related docs about them.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Fixing the links
Updating with Seb's comments
Adding weight
Fixing the engine aliases
Updating after Arun pushed
Removing empty file
Signed-off-by: Mary Anthony <mary@docker.com>
This makes it so when calling `docker run --rm`, or `docker rm -v`, only
volumes specified without a name, e.g. `docker run -v /foo` instead of
`docker run -v awesome:/foo` are removed.
Note that all volumes are named, some are named by the user, some get a
generated name. This is specifically about how the volume was specified
on `run`, assuming that if the user specified it with a name they expect
it to persist after the container is cleaned up.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Return an error if any of the keys don't match valid flags.
- Fix an issue ignoring merged values as named values.
- Fix tlsverify configuration key.
- Fix bug in mflag to avoid panics when one of the flag set doesn't have any flag.
Signed-off-by: David Calavera <david.calavera@gmail.com>
It is possible to invoke `docker ps -f status=dead`, but the
documentation for docker-ps does not mention `dead` as a valid option.
This commit fixes that.
Signed-off-by: Kareem Khazem <karkhaz@karkhaz.com>
The description "set `-1` to disable swap" is wrong, `build`,
`create` and `run` already fixed, we need to fix `update` as well.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
The path here should be absolute, else it would
deem it as volume name.
Also link to release page to contain static binary,
the old link not work, because it is just used to
install docker in os distro, it can not be used
as static binary directly.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
The example is not right in parameter, and also
one command is same as first one, it should be typo
before, we should use 'rw' as example for that.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
* If user doesn't specify the subnets to create a network, it will pick
subnets from inside preferred pool. This PR aims to inspect these subnets info
* Add integration tests for docker inspect the subnets.
* docker-py project is already synchronized.
* jenkins checks depend on https://github.com/docker/docker-py/pull/888
Fixes issue #18626
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Updaing and slight re-arrangement of security information
Signed-off-by: Mary Anthony <mary@docker.com>
Updating security files
Signed-off-by: Mary Anthony <mary@docker.com>
Updating links to the security documentation
Signed-off-by: Mary Anthony <mary@docker.com>
removing some extra spaces
Signed-off-by: Mary Anthony <mary@docker.com>
Correcting spelling
Signed-off-by: Mary Anthony <mary@docker.com>
docker's network disconnect api now supports `Force` option which can be
used to force cleanup an endpoint from any host in the cluster.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Instead of just showing the number of containers this patch will
show the number of running, paused and stopped containers as well.
Signed-off-by: Kim Eik <kim@heldig.org>
(cherry picked from commit a9804ab1cb117a132cbf460067d55f5146d50956)
When pulling an image with content trust enabled, two references are
created: a digest reference and a tag reference. Deleting by tag
wouldn't actually remove the image, because the digest reference keeps
it alive.
This change modifies the rmi logic so that digest references don't keep
an image alive. If the last tag referencing a given image is deleted,
any digest references to it will be removed as well, so the image can
actually get deleted. This fixes the usability problem with deletions
when content trust is in use, so something like "docker pull busybox;
docker rmi busybox" will work as expected.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Remove the experimental docs for user namespaces and add similar content
to the `docker daemon` command documentation.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
the discovery without the key being already there in the store or
created beforehand and implicitely by a 'swarm join'.
Signed-off-by: Alexandre Beslic <abronan@docker.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
This PR allows to configure the discovery path using the
--discovery-opt flag (with "kv.path=path/to/nodes"). We
can point to "docker/nodes" and use the docker discovery.
If docker instances are advertising to the cluster using
the `--cluster-advertise` flag, the swarm join command
becomes unnecessary.
Signed-off-by: Alexandre Beslic <abronan@docker.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
This commit includes the correct project link and also
includes a consolidated list of drivers that are supported.
Signed-off-by: Clinton Kitson <clintonskitson@gmail.com>
The existing example didn't illustrate how to
install strace in the container. In addition,
the rhel7 image used is no longer public (and maintained)
so not a good image to use in the example.
This updates the example to use htop (strace is
not working without disabling apparmor for the container)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement configurable detach keys (for `attach`, exec`, `run` and
`start`) using the client-side configuration
- Adds a `--detach-keys` flag to `attach`, `exec`, `run` and `start`
commands.
- Adds a new configuration field (in `~/.docker/config.json`) to
configure the default escape keys for docker client.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Add filter support for `network ls` to hide predefined network,
then user can use "docker network rm `docker network ls -f type=custom`"
to delete a bundle of userdefined networks.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Right now, the quiet (-q, --quiet) flag ignores the output
generated from within the container.
However, it ought to be quiet in a way that all kind
of diagnostic output should be ignored, unless the build
process fails.
This patch makes the quiet flag behave in the following way:
1. If the build process succeeds, stdout contains the image ID
and stderr is empty.
2. If the build process fails, stdout is empty and stderr
has the error message and the diagnostic output of that process.
If the quiet flag is not set, then everything goes to stdout
and error messages, if there are any, go to stderr.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
add a note around restart policies only working in detached mode
Signed-off-by: Aidan Feldman <aidan.feldman@gmail.com>
Update restart description with Mary's comments.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- fix naming and formatting
- provide more context when erroring auth
- do not capitalize errors
- fix wrong documentation
- remove ugly remoteError{}
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Allow passing mount propagation option shared, slave, or private as volume
property.
For example.
docker run -ti -v /root/mnt-source:/root/mnt-dest:slave fedora bash
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Each plug-in operates as a separate service, and registers with Docker
through general (plug-ins API)
[https://blog.docker.com/2015/06/extending-docker-with-plugins/]. No
Docker daemon recompilation is required in order to add / remove an
authentication plug-in. Each plug-in is notified twice for each
operation: 1) before the operation is performed and, 2) before the
response is returned to the client. The plug-ins can modify the response
that is returned to the client.
The authorization depends on the authorization effort that takes place
in parallel [https://github.com/docker/docker/issues/13697].
This is the official issue of the authorization effort:
https://github.com/docker/docker/issues/14674
(Here)[https://github.com/rhatdan/docker-rbac] you can find an open
document that discusses a default RBAC plug-in for Docker.
Signed-off-by: Liron Levin <liron@twistlock.com>
Added container create flow test and extended the verification for ps
Closing the HTTP connection requesting a push or pull will cancel the
push or pull. This behavior also applies to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes markdown formatting, and formatting of tables;
- Our markdown engine doesn't support spanning rows, so
re-wrapped table contents.
- Added a CSS-styles to prevent "code" blocks in tables
from wrapping
- The "logging drivers" table didn't have a header
- Aligned table borders in source code for better readability.
- Standardize on using `-it` in stead of -i -t or -ti
- Some markup issues
- Some minor textual fixups
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Closes#9798
@maintainers please note that this is a change to the UX. We no longer
require the -f flag on `docker tag` to move a tag from an existing image.
However, this does make us more consistent across our commands,
see https://github.com/docker/docker/issues/9798 for the history.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Docker daemon uses kv-store as the host-discovery backend.
Discovery module tracks the liveness of a node through a simple
keepalive mechanism. The keepalive mechanism depends on every
node performing heartbeat by registering itself with the discovery
module (via KV-Store Put operation). And for every Put operation,
the discovery module in all other nodes will receive a Watch
notification. That keeps the node alive.
Any node that fails to register itself within the TTL timer is
considered dead and removed from the discovery database.
The default timer (heartbeat = 20 seconds & ttl = 60 seconds)
works fine for small clusters. But for large clusters, these
default timers are extremely aggressive and that causes high CPU
& most of the processing is spent managing the node discovery
and that impacts normal daemon operation.
Hence we need a way to make the discovery ttl and heartbeat
configurable. As the cluster size grows, the user can change
these timers to make sure the daemon scales.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Plugin drivers were added to docker info in
https://github.com/docker/docker/pull/17300
but not added to the example output in the online
docs.
Also fixed mixed tabs/spaces in the API documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit enhance `docker network rm` command to allow user to delete
multi networks at the same time.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fixes#16555
Original docker `cp` always copy symbol link itself instead of target,
now we provide '-L' option to allow docker to follow symbol link to real
target.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
* This commit will mark --before and --since as deprecated, but leave their behavior
unchanged until they are removed, then re-implement them as options for --filter.
* And update the related docs.
* Update the integration tests.
Fixes issue #17716
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
- Optional "--shm-size=" was added to the sub-command(run, create,and build).
- The size of /dev/shm in the container can be changed
when container is made.
- Being able to specify is a numerical value that applies number,
b, k, m, and g.
- The default value is 64MB, when this option is not set.
- It deals with both native and lxc drivers.
Signed-off-by: NIWA Hideyuki <niwa.hiedyuki@jp.fujitsu.com>
Our implementation of systemd cgroups is mixture of systemd api and
plain filesystem api. It's hard to keep it up to date with systemd and
it already contains some nasty bugs with new versions. Ideally it should
be replaced with some daemon flag which will allow to set parent systemd
slice.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
devmapper uses xfs by default now. So include xfsprogs in build
environment. Also update docs to reflect the new default.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This patch adds the ability to run `docker stats` w/o arguments and get
statistics for all running containers by default. Also add a new
`--all` flag to list statistics for all containers (like `docker ps`).
New running containers are added to the list as they show up also.
Add integration tests for this new behavior.
Docs updated accordingly. Fix missing stuff in man/commandline
reference for `docker stats`.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The purpose of this PR is for users to distinguish Docker errors from
contained command errors.
This PR modifies 'docker run' exit codes to follow the chroot standard
for exit codes.
Exit status:
125 if 'docker run' itself fails
126 if contained command cannot be invoked
127 if contained command cannot be found
the exit status otherwise
Signed-off-by: Sally O'Malley <somalley@redhat.com>
- the /etc/hosts read caveat due to dynamic update
- information about docker_gwbridge
- Carries and closes#17654
- Updating with last change by Madhu
- Updating with the IPAM api 1.22
Signed-off-by: Mary Anthony <mary@docker.com>
Removing old networking.md
Updating dockernetworks.md with images
Adding information on network plugins
Adding blurb about links to docker networking
Updating the working documentation
Adding Overlay Getting Started
Downplaying links by removing refs/examples, adding refs/examples for network.
Updating getting started to reflect networks not links
Pulling out old network material
Updating per discussion with Madhu to add Default docs section
Updating with bridge default
Fix bad merge
Updating with new cluster-advertise behavior
Update working and NetworkSettings examples
Correcting example for default bridge discovery behavior
Entering comments
Fixing broken Markdown Syntax
Updating with comments
Updating all the links
Signed-off-by: Mary Anthony <mary@docker.com>
Added Note to show users that signals will not propagate to the container if the preferred exec form isn't used.
Signed-off-by: Eric Rosenberg <ehaydenr@gmail.com>
Adding Related information blocks
Final first draft pass: ready for review
Review comments
Entering comments from the gang
Updating connect to include paused
Signed-off-by: Mary Anthony <mary@docker.com>
This fixes the indentation of the storage driver
options list.
Also wraps/reformats some examples to prevent
horizontal scrollbars on the rendered HTML
Fixes#17140
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Refactor so that the Host flag validation doesn't destroy the user's input,
and then post process the flags when we know the TLS options
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
GitHub flavored markdown is now supported for links and images. Also, ran LinkChecker and FileResolver. Yay!
Fixes from Spider check
Output for docker/docker now goes into engine directory
Signed-off-by: Mary Anthony <mary@docker.com>
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
cleaning up docker run -v documentation for man and web reference guide
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
This leverages recent additions to libkv enabling client
authentication via TLS so the discovery back-end can be locked
down with mutual TLS. Example usage:
docker daemon [other args] \
--cluster-advertise 192.168.122.168:2376 \
--cluster-store etcd://192.168.122.168:2379 \
--cluster-store-opt kv.cacertfile=/path/to/ca.pem \
--cluster-store-opt kv.certfile=/path/to/cert.pem \
--cluster-store-opt kv.keyfile=/path/to/key.pem
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Provide a command line option dm.use_deferred_deletion to enable deferred
device deletion feature. By default feature will be turned off.
Not sure if there is much value in deferred deletion being turned on
without deferred removal being turned on. So for now, this feature can
be enabled only if deferred removal is on.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
- missing help option in `docs/reference/commandline/*.md` (some files
have it, the other I fixed didn't)
- missing `[OPTIONS]` in Usage description
- missing options
- formatting
- start/stop idempotence
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Use `pkg/discovery` to provide nodes discovery between daemon instances.
The functionality is driven by two different command-line flags: the
experimental `--cluster-store` (previously `--kv-store`) and
`--cluster-advertise`. It can be used in two ways by interested
components:
1. Externally by calling the `/info` API and examining the cluster store
field. The `pkg/discovery` package can then be used to hit the same
endpoint and watch for appearing or disappearing nodes. That is the
method that will for example be used by Swarm.
2. Internally by using the `Daemon.discoveryWatcher` instance. That is
the method that will for example be used by libnetwork.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
* Update format for 'Note:' to match other pages.
* Add link to Go's RFC3339Nano timestamp information.
Signed-off-by: Charles Chan <charleswhchan@users.noreply.github.com>
- The build-time variables are passed as environment-context for command(s)
run as part of the RUN primitve. These variables are not persisted in environment of
intermediate and final images when passed as context for RUN. The build environment
is prepended to the intermediate continer's command string for aiding cache lookups.
It also helps with build traceability. But this also makes the feature less secure from
point of view of passing build time secrets.
- The build-time variables also get used to expand the symbols used in certain
Dockerfile primitves like ADD, COPY, USER etc, without an explicit prior definiton using a
ENV primitive. These variables get persisted in the intermediate and final images
whenever they are expanded.
- The build-time variables are only expanded or passed to the RUN primtive if they
are defined in Dockerfile using the ARG primitive or belong to list of built-in variables.
HTTP_PROXY, HTTPS_PROXY, http_proxy, https_proxy, FTP_PROXY and NO_PROXY are built-in
variables that needn't be explicitly defined in Dockerfile to use this feature.
Signed-off-by: Madhav Puri <madhav.puri@gmail.com>
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
This PR makes a user visible behavior change with userland
proxy disabled by default and rely on hairpin NAT to be enabled
by default. This may not work in older (unsupported) kernels
where the user will be forced to enable userlandproxy if needed.
- Updated the Docs
- Changed the integration-cli to start with userlandproxy
desiabled by default.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
For both commands, volume is _not_ optional. Several volumes may
be specified.
Both commands now use the same name (VOLUME) for the command argument.
Signed-off-by: Harald Albers <github@albersweb.de>
Makes it possible to filter containers by image, using
--filter=ancestor=busybox and get all the container running busybox
image and image based on busybox (to the bottom).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Dharmit Shah <shahdharmit@gmail.com>
Added note about process interaction with container in detached mode
Signed-off-by: Dharmit Shah <shahdharmit@gmail.com>
run.md states that the operator can override all defaults set in the Dockerfile, and explicitly says that `--expose` overrides the `EXPOSE` instruction. Neither of these are true. An `EXPOSE` instruction cannot be overridden, `--expose` can only add additional exposed ports.
This change fixes the instructions, and also takes the liberty of crisping up the grammar and phrasing in a place or two.
Signed-off-by: Spencer Brown <spencer@spencerbrown.org>
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Changing vendor/src/github.com/docker/libnetwork to match lindenlab/libnetwork custom-host-port-ranges-1.7 branch
- rewrite intro to Dockerfile reference usage section to remove
references to 'source repository'
- Closes#14714
- Fixes: #8648
- Updating with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
it is possible to pass an UID that has not been created inside the container, clarify this in the docs.
This should fix issue #14795
Signed-off-by: Kai Blin <kai@samba.org>
This reverts commit 40b71adee390e9c06471b89ed845132b4ec80177.
Original commit (for which this is effectively a rebased version) is
72a500e9e5929b038816d8bd18d462a19e571c99 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
Make command like "docker images ubuntu:14.04" work and filter out the
image with the given tag.
Closes#8048.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
All docker subcommands support `-h` as an alias for `--help`
unless they have `-h` aliased to something else like `docker run`,
which uses `-h` for `--hostname`.
`-h` is not included in the help messages of the commands, though.
It ist visible in
* reference: only in `docker daemon` reference,
see output of `grep -Rse --help=false docs`
* man pages: only in `docker` man page
see output of `grep -RF '**-h**' man`
For consistency reasons, this commit removes `-h` as an alias for
`--help` from the reference page, man page and the bash completion.
Signed-off-by: Harald Albers <github@albersweb.de>
- Removing references to Boot2Docker replacing with Docker Machine
- Removing sudo warnings in instances where appropriate (no sudo in file)
- Updating with comments
Signed-off-by: Mary Anthony <mary@docker.com>
- fixing headings in run.md
- creating a table for readability
- adding index for logging
- moving logging overview into logging
- Updating with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
* Add space between values in docker stats output for easier parsing
Old output could not be parsed easily because there were columns
that did not have any separator. Also values that are together
without any space is difficult to read even for humans.
* Update unit.HumanSize comment to match what the does actually does
Signed-off-by: Otto Kekäläinen <otto@seravo.fi>
Options for zfs storage driver were incorrectly placed
under 'exec driver options' header. Move the header to
the correct place.
Now, this is the second time I am fixing this. First time
it was commit 68efb27, but the following commit 9af7afb
screwed it up again, so the header appears twice now.
Get rid of the the wrong one.
Cc: David Calavera <david.calavera@gmail.com>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
- boot2docker is deprecated in the 1.8.0
- docker-machine replaces it
- this fixes#14563
- Updating with thaJetzah comments
Signed-off-by: Mary Anthony <mary@docker.com>
There was a mistake in the plugin_volume.md file regarding the /VolumeDriver.Remove call.
Added fix and a better explanation.
Signed-off-by: Bardia Keyoumarsi <b.keyoumarsi@gmail.com>
* Clarify the list of supported instructions.
* Clarify behavior of ONBUILD, based on comments by @SvenDowideit, @theJeztah in PR #14735.
* Reorder list of instructions in alphabetical order.
Signed-off-by: Charles Chan <charleswhchan@users.noreply.github.com>
PR #11907 added support for import using file (path), but it missed
the update of cli/import.md. This fixes that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Update help line to allow 90 characters instead of 80
The trust flag pushes out the help description column wider, requiring more room to display help messages.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Re-add the docs from @calavera's PR to the moved cli cmd reference docs.
Fix gofmt and vet issues from carried commits
Add integration test for using format with --no-trunc and multi-names
Fix custom_test map order dependency on expected value check
Add docs to reference/commandline/ps.md
Remove "-F" flag option from original carried PR content
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Documented changes to API to enable new `docker cp` behavior.
Added documentation on `docker cp` usage and behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
It was missing some variants and 'maintainer' isn't actually supported.
Also sorted the list of allowed cmds in the code just to make it easier
to diff with the docs.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Carry #11675
Aside from what #11675 says, to me a key usecase for this is to support
more than one Docker cli running at the same time but each may have its
own set of config files.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Put a space after the `###` in the Example section. On the github parser the result file looks ok, but in the docker page (<https://docs.docker.com/reference/run/>) looks ugly.
Signed-off-by: Átila Camurça <camurca.home@gmail.com>
Options for zfs storage driver were incorrectly placed
under 'exec driver options' header. Move the header to
the correct place.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Showing "$$ exit 13" caught my eye and wasn't correct.
While in there I also made it so the following paragraph didn't go past 80 chars
Signed-off-by: Doug Davis <dug@us.ibm.com>
Update the man page for 'docker commit' to make explicit the fact that
'commit' does not save data in volumes.
Addresses comments in #7583
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
The current documentation correctly states that dockerignore pattern
searches are non-recursive. However, the example given for Markdown
files seems to contradict this by saying that `*.md` will exclude *all*
Markdown files. This commit clarifies the situation by explicitly
specifying that `*.md` will only exclude files in the root directory of
the project.
Signed-off-by: Tim Wraight <tim.wraight@tangentlabs.co.uk>
DeviceMapper must be explicitly selected because the Docker binary might not be linked to the right devmapper library.
With this change, Docker fails fast if the driver detection finds the devicemapper directory but the driver is not the default option.
The option `override_udev_sync_check` doesn't make sense anymore, since the user must be explicit to select devicemapper, so it's being removed.
Docker fails to use devicemapper only if Docker has been built statically unless the option was explicit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- creating index which is overview of configuring logs
- linking to individual journald/fluent material
- leaving behind table and link to index in run
Signed-off-by: Mary Anthony <mary@docker.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Upding sed, adding script to avoid redirects, remove mkdos
Signed-off-by: Mary Anthony <mary@docker.com>
Ignoring graphics with sed
Signed-off-by: Mary Anthony <mary@docker.com>
Fixing kitematic image
Signed-off-by: Mary Anthony <mary@docker.com>
Removing draft
Signed-off-by: Mary Anthony <mary@docker.com>
Fixing link
Signed-off-by: Mary Anthony <mary@docker.com>
removing from the menu
Signed-off-by: Mary Anthony <mary@docker.com>
Updatiing order of project material
Signed-off-by: Mary Anthony <mary@docker.com>
Removing from Regsitry v2 content per Olivier
Signed-off-by: Mary Anthony <mary@docker.com>
tweaking the touchup
Signed-off-by: Mary Anthony <mary@docker.com>
Removing include; only used four places; hugo global var replace
Signed-off-by: Mary Anthony <mary@docker.com>
Entering fixes from page-by-page
Signed-off-by: Mary Anthony <mary@docker.com>
Tweaking for Hugo
Updating the Dockerfile with new sed; fix broken link on Kitematic
Fixing image pull for Dockerfile
Removing docs targets
Signed-off-by: Mary Anthony <mary@docker.com>
Adding in other areas per comments
Updating with comments; equalizing generating man page info
Updating with duglin's comments
Doug is right here again;fixing.
Signed-off-by: Mary Anthony <mary@docker.com>
Minor tweak to the quoted/json form and made man page look like the Dockerfile
docs. W/o the `,` people may think there should be a space delimited list.
Signed-off-by: Doug Davis <dug@us.ibm.com>
I added 301 redirects from dockerproject.com to dockerproject.org but may as
well make sure everything is updated anyways.
Signed-off-by: Jessica Frazelle <princess@docker.com>
Fixes#13107. This change enables Go duration strings
computed relative to the client machine’s time to be used
as input parameters to `docker events --since/--until`
and `docker logs --since` arguments.
Added unit tests for pkg/timeutils.GetTimestamp as well.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
While reading some of the docs I noticed a few errors, so I ran
misspellings (https://pypi.python.org/pypi/misspellings) on markdown files
Signed-off-by: Joe Gordon <joe.gordon0@gmail.com>
Noticed that there were a few newlines in the middle of a \`...\` blocks that
made the text look funny when displayed in HTML.
Signed-off-by: Doug Davis <dug@us.ibm.com>
- 79 char line length (non-command).
- Consistent single space between sentences.
- Replace start of line tabs with spaces.
- Remove trailing white space.
- Consistent "**Note:**" style.
https://docs.docker.com/project/doc-style/#notes
- Replace the ``` sections with indented code.
Signed-off-by: Lloyd Dewolf <foolswisdom@gmail.com>
This patch is extending the qualifiers on the -v command to allow
an admin to tell the system to relabel, content. There might be a
need for something similar for changing the DAC Permissions.
Signed-off-by: Jessica Frazelle <princess@docker.com>
Signed by all authors:
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Jeff Lindsay <progrium@gmail.com>
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Signed-off-by: Luke Marsden <luke@clusterhq.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Adding experimental features into the mix
Signed-off-by: Mary Anthony <mary@docker.com>
renaming file
Signed-off-by: Mary Anthony <mary@docker.com>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The `--userland-proxy` daemon flag makes it possible to rely on hairpin
NAT and additional iptables routes instead of userland proxy for port
publishing and inter-container communication.
Usage of the userland proxy remains the default as hairpin NAT is
unsupported by older kernels.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch modifies the journald log driver to store the container ID in
a field named CONTAINER_ID, rather than (ab)using the MESSAGE_ID field.
Additionally, this adds the CONTAINER_ID_FULL field containing the
complete container ID and CONTAINER_NAME, containing the container name.
When using the journald log driver, this permits you to see log messages
from a particular container like this:
# journalctl CONTAINER_ID=a9238443e193
Example output from "journalctl -o verbose" includes the following:
CONTAINER_ID=27aae7361e67
CONTAINER_ID_FULL=27aae7361e67e2b4d3864280acd2b80e78daf8ec73786d8b68f3afeeaabbd4c4
CONTAINER_NAME=web
Closes: #12864
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Single value labels do not work in 1.6 and multi-label instructions only work when separated by non-EOL whitespace.
I also added an example snip from the inspect output with the labels that are included in this guide.
Signed-off-by: Jeff Nickoloff <jeff@allingeek.com>
This PR does the following:
- migrated ~/.dockerfg to ~/.docker/config.json. The data is migrated
but the old file remains in case its needed
- moves the auth json in that fie into an "auth" property so we can add new
top-level properties w/o messing with the auth stuff
- adds support for an HttpHeaders property in ~/.docker/config.json
which adds these http headers to all msgs from the cli
In a follow-on PR I'll move the config file process out from under
"registry" since it not specific to that any more. I didn't do it here
because I wanted the diff to be smaller so people can make sure I didn't
break/miss any auth code during my edits.
Signed-off-by: Doug Davis <dug@us.ibm.com>
using standard unix postfixes add unit test for display
also change doc for memory usage display change
for example GiB will be GB
Signed-off-by: Sun Jianbo <wonderflow@zju.edu.cn>
If an image has been tagged to multiple repos and tags, 'docker
rmi -f IMAGE_ID' will just untag one random repo instead of
untagging all and deleting the image. This patch implement
this. This commit is composed of:
*untag all names and delete the image
*add test to this feature
*modify commandline/cli.md to explain this
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
This provides an override for forcing the daemon to still attempt
running the devicemapper driver even when udev sync is not supported.
Intended to be a very clear impairment for those choosing to use it. If
udev sync is false, there will still be an error in the daemon logs,
even when the override is in place. The docs have an explicit WARNING.
Including link to the docs for users that encounter this daemon error
during an upgrade.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
This flag is passed to the daemon CLI. In my opinion, "Container's
logging driver" is not accurate and refers to 'one container'.
Also the `syslog` driver was missing from the list. Having the list
of all logging drivers won't scale here (should be <80 chars per line)
and we have `rotation` driver coming up in the pipeline as well (gh11485).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Some bullet lists didn't render as bullet-lists because
of a missing newline.
Also added missing "label" filter for `docker ps` and
slightly re-worded the header above the supported filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Syslog was a heading-2, but should be heading-3;
changed the headings to heading-4 to match the
"network settings" section.
Also changed "Log driver" to "logging driver" for JSON.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since `dirperm1` requires a more recent aufs patch than many current OS release,
we cant remove #783 completely. This documents that docker will apply `dirperm1`
automatically for systems that support it
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
We now advise people to configure docker group and
add to sudo. Mac shouldn't use sudo. Removed sudo
from command examples. Left in installation to be removed
in installation doc sweep -- removing requires finer
grain control.
Signed-off-by: Mary Anthony <mary@docker.com>
We now have instructions in our Unix installs about setting up
docker group to avoid sudo. Also, Mac/Windows shouldn't use
sudo. So, I've removed sudo from our examples and added a
section at the top reminding them that if they have to use
sudo to run docker they can change that.
Signed-off-by: Mary Anthony <mary@docker.com>
Having the list in one spot makes it easier for people to see what's
avaiable instead of having to scan all of the docs and extract the info.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Add the capability to cancel the build by disconnecting the client.
This adds a `cancelled` channel which is used to signal that a build
should halt. The build is halted by sending a Kill signal and noticing
that the cancellation channel is closed.
This first pass implementation does not allow cancellation during a
pull, but that will come in a subsequent PR.
* Add documentation of cancellation to cli and API
* Protect job cancellation with sync.Once
* Add TestBuildCancelationKillsSleep
* Add test case for build cancellation of RUN statements.
Signed-off-by: Peter Waller <p@pwaller.net>
Link to new guide. Added a quickstart contributor guide for experienced people.
Converting narrative style to procedures for easier use. I think there is something missing in the
release publishing section...but it looks like it was missing in the original.
Updates per thaJeztah
Edits per Fred
Updating with comments from Sven
Signed-off-by: Mary Anthony <mary@docker.com>
Closes#10191
Allow `docker build` to set --cpu-shares, --cpuset, --memory,
--memory-swap for all containers created by the build.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Copied code from CmdSave into CmdExport. This should work, not an expert in the API calls being made. But it does make more sense to have a consistent export/save flag.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
checkpoint before edits on the export functions
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added an --output flag to docker export and created tests.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
White space cleanup.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Docker-DCO-1.1-Signed-off-by: Joseph Kern <jkern@semafour.net> (github: jfrazelle)
checkpoint before edits on the export functions
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
White space cleanup.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added text to reflect a new output option for the export command.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Whitespace clean up
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added man page documentation for the new --output flag in export
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
The STDOUT behavior of cp is not yet released in 1.50 so removed.
Also, tested against 1.5 all other behaviors and extended documentation to match.
Renamed HOSTPATH to HOSTDIR to give a self documenting name.
Adding back in the references to STDOUT
fix the command string
Entering Doug's comment re append and ~/tmp/foo in the glass
Adding in Doug's comments regarding PATHs and missing |-
Updating with James comments
Signed-off-by: Mary Anthony <mary@docker.com>
Add ability to refer to an image by repository name and digest using the
format repository@digest. Works for pull, push, run, build, and rmi.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
Adds more documentation for labels and adds the label instruction to the
man-pages.
Also included is a document called "Labels - custom meta-data in Docker"
in the user-guide, this is still a work-in-progress I started to describe
the "namespaces" conventions, an example on storing structured data.
I ran a bit "out of steam" (writers block?) on that document, but kept
it in (for now), in case it still ends up useful.
The Remote API documentation changes will need to be moved to the
docker_remote_api_v1.18.md document when rebasing the whole PR.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Darren Shepherd <darren@rancher.com>
Save "LABEL" field in Dockerfile into image content.
This will allow a user to save user data into an image, which
can later be retrieved using:
docker inspect IMAGEID
I have copied this from the "Comment" handling in docker images.
We want to be able to add Name/Value data to an image to describe the image,
and then be able to use other tools to look at this data, to be able to do
security checks based on this data.
We are thinking about adding version names,
Perhaps listing the content of the dockerfile.
Descriptions of where the code came from etc.
This LABEL field should also be allowed to be specified in the
docker import --change LABEL:Name=Value
docker commit --change LABEL:Name=Value
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This adds two more tables to the run reference documentation.
- the list of 'modes' for Network settings is now a table.
- the "note" for `--net="host"` was moved from the list to the detailed
description.
- the 'options' for "Runtime constraints on CPU and memory" are
now a table
- slightly re-worded the description for "memory" options, e.g.
"It is not allowed..." was rewriten to "The *container* is not allowed..."
- fix example in "Runtime privilege, Linux capabilities, and LXC configuration"
being indented twice
- slightly reduced indenting in some `usage` output to be better readable.
- fixes a typo `/ets/hosts` -> `/etc/hosts`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Cgroup resources are host dependent, they should be in hostConfig.
For backward compatibility, we just copy it to hostConfig, and leave it in
Config for now, so there is no regressions, but the right way to use this
throught json is to put it in HostConfig, like:
{
"Hostname": "",
...
"HostConfig": {
"CpuShares": 512,
"Memory": 314572800,
...
}
}
As we will add CpusetMems, CpusetCpus is definitely a better name, but some
users are already using Cpuset in their http APIs, we also make it compatible.
The main idea is keep using Cpuset in Config Struct, and make it has the same
value as CpusetCpus, but not always, some scenarios:
- Users use --cpuset in docker command, it can setup cpuset.cpus and can
get Cpuset field from docker inspect or other http API which will get
config info.
- Users use --cpuset-cpus in docker command, ditto.
- Users use Cpuset field in their http APIs, ditto.
- Users use CpusetCpus field in their http APIs, they won't get Cpuset field
in Config info, because by then, they should already know what happens
to Cpuset.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
A minor thing, but I noticed that the "Reference" drop-down menu just
says "Command line". This was fine when we just had one command line,
but now there's also 'Compose command line' and I suspect we may add
others later. We should qualify the Docker one with the word "Docker"
in front
Signed-off-by: Doug Davis <dug@us.ibm.com>
`docker rmi` output in docs/sources/reference/commandline/cli.md
is different from real scene. This commit fixes it.
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
Read `/proc/sys/net/ipv4/ip_local_port_range` kernel parameter to obtain
ephemeral port range that now sets the boundaries of port allocator
which finds free host ports for those exported by containers.
Signed-off-by: Michal Minar <miminar@redhat.com>
This change adds daemon's system time as RFC3339Nano to the `/info` endpoint
and shows in a more readable format (UnixDate) in `docker -D info` output.
I will be using this to fix the clock skew between the remote test host and
the CI machines running `docker events`-related tests as they're using `--since`
and `--until` and the timestamps are not matching when daemon is not on the
same machine.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The original description has some mistakes and lack of many useful
information, I rewrite them to make it accurate and complete.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This moves some information on restart-policies from
the "command line" page to "run reference".
Also fixes some minor typos and adds a "NOTE"
about --rm and --restart not allowed to be combined.
Also removes inline CSS styles from tables,
which will be styled by the stylesheet, and fixes
some minor MarkDown errors (`<` -> <)
depends on https://github.com/docker/docs-base/pull/1resolves#11069
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and add a testcase to catch this in the future.
While in there I also:
- removed extra periods from the few options that had them (new test)
- made the --filter option consistent across all command
Signed-off-by: Doug Davis <dug@us.ibm.com>
Closes#10807
Adds support for `dockerfile` ONLY when `Dockerfile` can't be found.
If we're building from a Dockerfile via stdin/URL then always download
it a `Dockerfile` and ignore the -f flag.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Use `-it` combination in example instead of `-ti`, because this is how it used everywhere in examples.
Update dockerfile_best-practices.md
Fix typo in command name
Signed-off-by: Dmitry Gusev <dmitry.gusev@gmail.com>
Fixes: 10855
The example was actually incorrect for many situations, and also, now
that we have IPv6 we should not that the example is for IPv4 and note
how to find IPv6 addresses. Also, the device they want to connect to
could be the bridge, or main ethernet device, or some other device
name, so note that as well.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Applied multi parameters to pause and unpause.
Created a new test file dedicated for pause commands.
Created a new utility function to get a slice of paused containers.
Updated documentation
Signed-off-by: André Martins <martins@noironetworks.com>
In order to fit printed messages to fit 80 chars,
rewording messages for `-H` and `--tls` flags.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
It didn't work on v2 anyways. And an image with a lot of aliases was slow to
fetch.
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <princess@docker.com> (github: jfrazelle)
It's ambiguous to say that `ENV` is _functionally equivalent to prefixing the command with `<key>=<value>`_. `ENV` sets the environment for all future commands, but `RUN` can take chained commands like `RUN foo=bar bash -c 'echo $foo' && bash -c 'echo $foo $bar'`. Users with a solid understanding of `exec` may grok this without confusion, but less experienced users may need this distinction.
Signed-off-by: Michael A. Smith <msmith3@ebay.com>
Improve Environment Handling Descriptions
- Link `ENV` and `Environment Replacement`
- Improve side-effects of `ENV` text
- Rearrange avoiding side effects text
Signed-off-by: Michael A. Smith <msmith3@ebay.com>
Reflow change in commit 195f3a3f removed newlines in the config format.
This change reverts the sample config to the original formatting, which
matches the actual config format of a `awsconfig` file.
Signed-off-by: Katie McLaughlin <katie@glasnt.com>
This modifies the "docker help" text so that it is no wider than 80 chars
and each description fits on one line. This will also try to use ~ when
possible
Added a test to make sure we don't go over 80 chars again.
Added a test to make sure we use ~
Applied rules/tests to all docker commands - not just main help text
Closes#10214
Signed-off-by: Doug Davis <dug@us.ibm.com>
Sebastiaan van Stijn
Hao Zhang
Kai Qiang Wu(Kennan)
Darren Stahl
Wen Cheng Ma
Dimitry Andric
Jared Hocutt
Brian Goff
Dan Walsh
Mary Anthony
Thomas Riccardi
Yi EungJun
Yong Tang
Hyzhou
Yi EungJun
Lei Jitang
mikelinjie
Tomasz Kopczynski
Máximo Cuadros
allencloud
Liron Levin
Anusha Ragunathan
Aaron Lehmann
Harald Albers
Shishir Mahajan
Sven Dowideit
Kenfe-Mickael Laventure
Phil Estes
Martin Mosegaard Amdisen
David Calavera
Zhang Wei
Jason Heiss
Vivek Goyal
Madhu Venugopal
Antonio Murdaca
Jessica Frazelle
Mrunal Patel
Micah Zoltu
Qiang Huang
Ken Cochrane
Linus Heckemann
Linus Heckemann
Cameron Spear
Aidan Hobson Sayers
Jian Zhang
Alessandro Boch
ozlerhakan
Bastiaan Bakker
Vishnu kannan
Robert Wallis
Victor Vieux
Sian Lerk Lau
Tianon Gravi
Doug Davis
Muthukumar R
Tom X. Tobin
Chun Chen
Mohammad Banikazemi
Vincent Woo
Vincent Demeester
Felix Hupfeld
qg
Prayag Verma
Bryan Boreham
Jasmine Hegman
Anton Polonskiy
Kareem Khazem
Azat Khuyiyakhmetov
Joe Doliner
Ryan Belgrave
Tibor Vass
Kim Eik
Alexander Morozov
Clinton Kitson
Thomas Swift
Ilya Dmitrichenko
Ma Shimiao
Boaz Shuster
Aidan Feldman
Ray Tsang
Justas Brazauskas
Dima Stopel
Sambuddha Basu
Chris Weyl
Ben Firshman
gwx296173
Antonio Murdaca
Christopher Jones
Mike Brown
NIWA Hideyuki
Olle Jonsson
Zhang Kun
pidster
Sally O'Malley
Viktor Stanchev
John Howard
Gou Rao
harold cooper
rsmoorthy
Eric Rosenberg
Denis Gladkikh
Shijiang Wei
Jeremy Unruh
Mihuleacc Sergiu
Daniel Hiltgen
Luca Marturana
Yuan Sun
Deng Guangxing
Grant Reaber
Daniel Nephin
Richard Scothern
Arnaud Porterie
Charles Chan
Tim Waugh
qhuang
Hu Keping
Madhav Puri
Tim Hockin
Amen Belayneh
xlgao-zju
Nalin Dahyabhai
Jana Radhakrishnan
Samuel Karp
Peter Edge
Dharmit Shah
Taylor Jones
Sheng Yang
Ed Costello
Tonis Tiigi
Álex González
He Simei
Spencer Brown
Morgan Bauer
bin liu
Don Kjer
Kai Blin
Patrick Hemmer
Tim Dettrick
Ankush Agarwal
Laurent Erignoux
Stephen Rust
Otto Kekäläinen
David Cramer
Kir Kolyshkin
Bardia Keyoumarsi
John Tims
Michał Czeraszkiewicz
Derek McGowan
Nathan McCauley
Andy Rothfusz
Mohammed Aaqib Ansari
paetling
jgeiger
Josh Hawn
wlan0
Raghavendra K T
Átila Camurça Alves
Harry Zhang
Peeyush Gupta
Lars Kellogg-Stedman
Tim Wraight
Chris McKinnel
Lai Jiangshan
TAGOMORI Satoshi
Chun Chen
Dennis Docter
Moysés Borges
Gildas Cuisinier
ChaYoung You
Marius Sturm
Nicolas Borboën
Jessica Frazelle
Ahmet Alp Balkan
Joe Gordon
Antonio Murdaca
Lloyd Dewolf
Jan-Jaap Driessen
Darren Shepherd
Jörg Thalheim
Gianluca Borello
Marianna
Julien Barbier
Jessica Frazelle
buddhamagnet
Tristan Carel
Rick Wieman
Jeff Nickoloff
Sylvain Baubeau
wonderflow
Eric Windisch
Vincent Batts
David Young
Yan Feng
dalanlan
cheney90
Daniel, Dao Quang Minh
John Willis
Michael West
jimmyxian
Natalie Parker
sidharthamani
Peter Waller
Mary Anthony
Todd Whiteman
Joseph Kern
Andy Goldstein
Michal Minar
Mabin
ChristoperBiscardi
Srini Brahmaroutu
Zhang Wentao
resouer
Dmitry Gusev
Abin Shahab
André Martins
Colm Hally
Bradley Cicenas
Peter Salvatore
Michael A. Smith
Katie McLaughlin