use filepath.EvalSymlink instead of check with filepath.IsAbs
Co-authored-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Will Wang <willww64@gmail.com>
This environment variable allows for setting additional headers
to be sent by the client. Headers set through this environment
variable are added to headers set through the config-file (through
the HttpHeaders field).
This environment variable can be used in situations where headers
must be set for a specific invocation of the CLI, but should not
be set by default, and therefore cannot be set in the config-file.
WARNING: If both config and environment-variable are set, the environment
variable currently overrides all headers set in the configuration file.
This behavior may change in a future update, as we are considering the
environment variable to be appending to existing headers (and to only
override headers with the same name).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We'll be using release branches for minor version updates, so instead
of (e.g.) a 27.0 branch, we'll be using 27.x and continue using the
branch for minor version updates.
This patch changes the validation step to only compare against the
major version.
Co-authored-by: Cory Snider <corhere@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The fileStore itself is aware that it's insecure, so we can make it
responsible for printing the warning. It's not "perfect", as we use
`os.Stderr` unconditionally (not `dockerCli.Err()`), but probably won't
make a difference in _most_ cases.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Add an empty line before the warning to separate it from the command's output
- Use the `/go/` redirect URL that we have available.
- Put quotes around the filename used for storage.
- Use present tense for the message, as the message is printed while saving.
- User "credentials" instead of "password" for consistency with "credentials-store"
Before:
docker login myregistry.example.com
Username: thajeztah
Password:
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credential-stores
Login Succeeded
After:
docker login myregistry.example.com
Username: thajeztah
Password:
WARNING! Your credentials are stored unencrypted in '/root/.docker/config.json'.
Configure a credential helper to remove this warning. See
https://docs.docker.com/go/credential-store/
Login Succeeded
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If we fail to save credentials, make sure that the error about saving
doesn't get lost in the warning about credentials being stored unencrypted.
Also discard errors about printing the warning, as those would be unlikely,
and if they would occur, probably would fail to be printed as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `reportError` utility was present because cli.StatusError would print
the error decorated with `Status: <error-message>, Code: <exit-code>`.
That was not desirable in many cases as it would mess-up the output. To
prevent this, the CLI had code to check for an empty `Status` (error message)
in which case the error would be "ignored" (and only used for the exit-status),
and the `reportError` utility would be used to manually print a custom error
message before returning the error.
Now that bca2090061 fixed the output format
of `cli.StatusError`, and 3dd6fc365d and
350a0b68a9 no longer discard these error,
we can get rid of this utility, and just set the error-message for
the status-error.
This patch:
- Introduces a `withHelp` which takes care of decorating errors with
a "Run --help" hint for the user.
- Introduces a `toStatusError` utility that detects certain errors in
the container to assign a corresponding exit-code (these error-codes
can be used to distinguish "client" errors from "container" errors).
- Removes the `reportError` utility, and removes code that manually
printed errors before returning.
Behavior is mostly unmodified, with the exception of some slight reformatting
of the errors:
- `withHelp` adds a `docker:` prefix to the error, to indicate the error
is produced by the `docker` command. This prefix was already present
in most cases.
- The "--help" hint is slightly updated ("Run 'docker run --help' for
more information" instead of "See 'docker run --help'"), to make it
more clear that it's a "call to action".
- An empty is added before the "--help" hint to separate it better from
the error-message.
Before this patch:
$ docker run --pull=invalid-option alpine
docker: invalid pull option: 'invalid-option': must be one of "always", "missing" or "never".
See 'docker run --help'.
$ echo $?
125
$ docker run --rm alpine nosuchcommand
docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: exec: "nosuchcommand": executable file not found in $PATH: unknown.
$ echo $?
127
With this patch:
$ docker run --pull=invalid-option alpine
docker: invalid pull option: 'invalid-option': must be one of "always", "missing" or "never"
Run 'docker run --help' for more information
$ echo $?
125
$ docker run --rm alpine nosuchcommand
docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: exec: "nosuchcommand": executable file not found in $PATH: unknown.
Run 'docker run --help' for more information
$ echo $?
127
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When trying to use an invalid flag, the CLI currently prints the a short
error message, instructions to use the `--help` flag to learn about the
correct usage, followed by the command's usage output.
While this is a common convention, and may have been a nice gesture when
docker was still young and only had a few commands and options ("you did
something wrong, but here's an overview of what you can use"), that's no
longer the case, and many commands have a _very_ long output.
The result of this is that the error message, which is the relevant
information in this case - "You mis-typed something" - is lost in the
output, and hard to find (sometimes even requiring scrolling back).
The output is also confusing, because it _looks_ like something ran
successfully (most of the output is not about the error!).
Even further; the suggested resolution (try `--help` to see the correct
options) is rather redundant, because running teh command with `--help`
produces _exactly_ the same output as was just showh, baring the error
message. As a fun fact, due to the usage output being printed, the
output even contains not one, but _two_ "call to actions";
- `See 'docker volume --help'.` (under the erro message)
- `Run 'docker volume COMMAND --help' for more information on a command.`
(under the usage output)
In short; the output is too verbose, confusing, and doesn't provide
a good UX. Let's reduce the output produced so that the focus is on the
important information.
This patch:
- Changes the usage to the short-usage.
- Prefixes the error message with the binary / root-command name
(usually `docker:`) to be consistent with `unknon command`, and helps
to distinguish where the message originated from (the `docker` CLI in
this case).
- Adds an empty line between the error-message and the "call to action"
(`Run 'docker volume --help' ...` in the example below). This helps
separating the error message ("unkown flag") from the call-to-action.
Before this patch:
docker volume --no-such-flag
unknown flag: --no-such-flag
See 'docker volume --help'.
Usage: docker volume COMMAND
Manage volumes
Commands:
create Create a volume
inspect Display detailed information on one or more volumes
ls List volumes
prune Remove unused local volumes
rm Remove one or more volumes
update Update a volume (cluster volumes only)
Run 'docker volume COMMAND --help' for more information on a command.
With this patch:
docker volume --no-such-flag
docker: unknown flag: --no-such-flag
Usage: docker volume COMMAND
Run 'docker volume --help' for more information
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch:
docker run --volumes-from amazing_nobel
amazing_cannon boring_wozniak determined_banzai
elegant_solomon reverent_booth amazing_nobel
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
registerCompletionFuncForGlobalFlags was called from newDockerCommand,
at which time no context-store is initialized yet, so it would return
a nil value, probably resulting in `store.Names` to panic, but these
errors are not shown when running the completion. As a result, the flag
completion would fall back to completing from filenames.
This patch changes the function to dynamically get the context-store;
this fixes the problem mentioned above, because at the time the completion
function is _invoked_, the CLI is fully initialized, and does have a
context-store available.
A (non-exported) interface is defined to allow the function to accept
alternative implementations (not requiring a full command.DockerCLI).
Before this patch:
docker context create one
docker context create two
docker --context <TAB>
.DS_Store .idea/ Makefile
.dockerignore .mailmap build/
...
With this patch:
docker context create one
docker context create two
docker --context <TAB>
default one two
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"docker run" and "docker create" are mostly identical, so we can copy
the same completion functions,
We could possibly create a utility for this (similar to `addFlags()` which
configures both commands with the flags they share). I considered combining
his with `addFlags()`, but that utility is also used in various tests, in
which we don't need this feature, so keeping that for a future exercise.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's an alias for cobra.FixedCompletions but takes a variadic list
of strings, so that it's not needed to construct an array for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
EnvVarNames offers completion for environment-variable names. This
completion can be used for "--env" and "--build-arg" flags, which
allow obtaining the value of the given environment-variable if present
in the local environment, so we only should complete the names of the
environment variables, and not their value. This also prevents the
completion script from printing values of environment variables
containing sensitive values.
For example;
export MY_VAR=hello
docker run --rm --env MY_VAR alpine printenv MY_VAR
hello
Before this patch:
docker run --env GO
GO111MODULE=auto GOLANG_VERSION=1.21.12 GOPATH=/go GOTOOLCHAIN=local
With this patch:
docker run --env GO<tab>
GO111MODULE GOLANG_VERSION GOPATH GOTOOLCHAIN
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is just a convenience function to allow defining completion to
use the default (complete with filenames and directories).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
No changes in vendored files. This one got out of sync with the other modules
from the same repository.
full diff: d307bd883b...49dd2c1f3d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Will Wang
Paweł Gronowski
Laura Brehm
Sebastiaan van Stijn
plaurent
Sebastiaan van Stijn