This adds the currently selected "docker context" to the output
of "docker version", which allows users to see which context
is selected to produce the version output, and can be used (for
example), to set the prompt to the currently selected context:
(in `~/.bashrc`):
```bash
function docker_context_prompt() {
PS1="context: $(docker version --format='{{.Client.Context}}')> "
}
PROMPT_COMMAND=docker_context_prompt
```
After reloading the `~/.bashrc`, the prompt now shows the currently selected
`docker context`:
```bash
$ source ~/.bashrc
context: default> docker context create --docker host=unix:///var/run/docker.sock my-context
my-context
Successfully created context "my-context"
context: default> docker context use my-context
my-context
Current context is now "my-context"
context: my-context> docker context use default
default
Current context is now "default"
context: default>
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This flag type was not yet merged upstream, so instead of
using a fork of spf13/pflag, define the type locally, so that
we can vendor the upstream package again.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Added two new modes accepted by the `--mode` flag
* `replicated-job` creates a replicated job
* `global-job` creates a global job.
* When using `replicated-job` mode, the `replicas` flag sets the
`TotalCompletions` parameter of the job. This is the total number of
tasks that will run
* Added a new flag, `max-concurrent`, for use with `replicated-job`
mode. This flag sets the `MaxConcurrent` parameter of the job, which
is the maximum number of replicas the job will run simultaneously.
* When using `replicated-job` or `global-job` mode, using any of the
update parameter flags will result in an error, as jobs cannot be
updated in the traditional sense.
* Updated the `docker service ls` UI to include the completion status
(completed vs total tasks) if the service is a job.
* Updated the progress bars UI for service creation and update to
support jobs. For jobs, there is displayed a bar covering the overall
progress of the job (the number of tasks completed over the total
number of tasks to complete).
* Added documentation explaining the use of the new flags, and of jobs
in general.
Signed-off-by: Drew Erny <derny@mirantis.com>
These packages are now living in their own repository. Updating
docker/docker to replace the dependencies.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
67ebcd6dcf added an exception for
the "host-gateway" magic value to the validation rules, but didn't
add thise value to any of the tests.
This patch adds the magic value to tests, to verify the validation
is skipped for this magic value.
Note that validation on the client side is "optional" and mostly
done to provide a more user-friendly error message for regular
values (IP-addresses).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Perform feature detection when actually needed, instead of during
initializing
- Version negotiation is performed either when making an API request,
or when (e.g.) running `docker help` (to hide unsupported features)
- Use a 2 second timeout when 'pinging' the daemon; this should be
sufficient for most cases, and when feature detection failed, the
daemon will still perform validation (and produce an error if needed)
- context.WithTimeout doesn't currently work with ssh connections (connhelper),
so we're only applying this timeout for tcp:// connections, otherwise
keep the old behavior.
Before this change:
time sh -c 'DOCKER_HOST=tcp://42.42.42.41:4242 docker help &> /dev/null'
real 0m32.919s
user 0m0.370s
sys 0m0.227s
time sh -c 'DOCKER_HOST=tcp://42.42.42.41:4242 docker context ls &> /dev/null'
real 0m32.072s
user 0m0.029s
sys 0m0.023s
After this change:
time sh -c 'DOCKER_HOST=tcp://42.42.42.41:4242 docker help &> /dev/null'
real 0m 2.28s
user 0m 0.03s
sys 0m 0.03s
time sh -c 'DOCKER_HOST=tcp://42.42.42.41:4242 docker context ls &> /dev/null'
real 0m 0.13s
user 0m 0.02s
sys 0m 0.02s
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker network prune` command removes unused custom networks,
but built-in networks won't be removed. This patch updates the
message to mention that it's only removing custom networks.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The trust tests were not resetting the environment after they
ran, which could result in tests following those tests to fail.
While at it, I also updated some other tests to use gotest.tools
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When printing services' tasks with `docker service ps` command, tasks are grouped only by task slot.
This leads to interleaving tasks from different services when `docker service ps` is called with multiple services.
Besides this, global services do not have slots at all and printing tasks for them doesn't group and
doesn't properly indent tasks with \_.
With this patch all tasks are grouped by service ID, slot and node ID (relevant only for global services) and it fixes issue 533.
Before this patch:
```console
docker service ps a b c
ID NAME IMAGE NODE DESIRED STATE CURRENT STATE ERROR PORTS
xbzm6ed776yw c.j1afavbqqhr21jvnid3nnfoyt nginx:alpine docker-desktop Running Running 5 seconds ago
4mcsovp8ckwn \_ c.j1afavbqqhr21jvnid3nnfoyt nginx:alpine docker-desktop Shutdown Shutdown 6 seconds ago
qpcgdsx1r21a b.1 nginx:alpine docker-desktop Running Running 2 seconds ago
kfjo1hly92l4 a.1 nginx:alpine docker-desktop Running Running 5 seconds ago
pubrerosvsw5 b.1 nginx:alpine docker-desktop Shutdown Shutdown 3 seconds ago
fu08gfi8tfyv a.1 nginx:alpine docker-desktop Shutdown Shutdown 7 seconds ago
pu6qmgyoibq4 b.2 nginx:alpine docker-desktop Running Ready 1 second ago
tz1n4hjne6pk \_ b.2 nginx:alpine docker-desktop Shutdown Shutdown less than a second ago
xq8dogqcbxd2 a.2 nginx:alpine docker-desktop Running Running 44 seconds ago
rm40lofzed0h a.3 nginx:alpine docker-desktop Running Starting less than a second ago
sqqj2n9fpi82 b.3 nginx:alpine docker-desktop Running Running 5 seconds ago
prv3gymkvqk6 \_ b.3 nginx:alpine docker-desktop Shutdown Shutdown 6 seconds ago
qn7c7jmjuo76 a.3 nginx:alpine docker-desktop Shutdown Shutdown less than a second ago
wi9330mbabpg a.4 nginx:alpine docker-desktop Running Running 2 seconds ago
p5oy6h7nkvc3 \_ a.4 nginx:alpine docker-desktop Shutdown Shutdown 3 seconds ago
```
After this patch:
```console
docker service ps a b c
ID NAME IMAGE NODE DESIRED STATE CURRENT STATE ERROR PORTS
kfjo1hly92l4 a.1 nginx:alpine docker-desktop Running Running 32 seconds ago
fu08gfi8tfyv \_ a.1 nginx:alpine docker-desktop Shutdown Shutdown 34 seconds ago
3pam0limnn24 a.2 nginx:alpine docker-desktop Running Running 23 seconds ago
xq8dogqcbxd2 \_ a.2 nginx:alpine docker-desktop Shutdown Shutdown 24 seconds ago
rm40lofzed0h a.3 nginx:alpine docker-desktop Running Running 26 seconds ago
qn7c7jmjuo76 \_ a.3 nginx:alpine docker-desktop Shutdown Shutdown 27 seconds ago
wi9330mbabpg a.4 nginx:alpine docker-desktop Running Running 29 seconds ago
p5oy6h7nkvc3 \_ a.4 nginx:alpine docker-desktop Shutdown Shutdown 30 seconds ago
qpcgdsx1r21a b.1 nginx:alpine docker-desktop Running Running 29 seconds ago
pubrerosvsw5 \_ b.1 nginx:alpine docker-desktop Shutdown Shutdown 30 seconds ago
pu6qmgyoibq4 b.2 nginx:alpine docker-desktop Running Running 26 seconds ago
tz1n4hjne6pk \_ b.2 nginx:alpine docker-desktop Shutdown Shutdown 27 seconds ago
sqqj2n9fpi82 b.3 nginx:alpine docker-desktop Running Running 32 seconds ago
prv3gymkvqk6 \_ b.3 nginx:alpine docker-desktop Shutdown Shutdown 33 seconds ago
xbzm6ed776yw c.j1afavbqqhr21jvnid3nnfoyt nginx:alpine docker-desktop Running Running 32 seconds ago
4mcsovp8ckwn \_ c.j1afavbqqhr21jvnid3nnfoyt nginx:alpine docker-desktop Shutdown Shutdown 33 seconds ago
```
Signed-off-by: Andrii Berehuliak <berkusandrew@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker search --automated` and `docker search --stars` options were
deprecated in release v1.12.0, and scheduled for removal in v17.09.
This patch removes the deprecated flags, in favor of their equivalent
`--filter` options (`docker search --filter=is-automated=<true|false>` and
`docker search --filter=stars=...`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker push` command up until [v0.9.1](https://github.com/moby/moby/blob/v0.9.1/api/client.go#L998)
always pushed all tags of a given image, so `docker push foo/bar` would push (e.g.)
all of `foo/bar:latest`, `foo:/bar:v1`, `foo/bar:v1.0.0`.
Pushing all tags of an image was not desirable in many case, so docker v0.10.0
enhanced `docker push` to optionally specify a tag to push (`docker push foo/bar:v1`)
(see https://github.com/moby/moby/issues/3411 and the pull request that implemented
this: https://github.com/moby/moby/pull/4948).
This behavior exists up until today, and is confusing, because unlike other commands,
`docker push` does not default to use the `:latest` tag when omitted, but instead
makes it push "all tags of the image"
For example, in the following situation;
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
```
Running `docker push thajeztah/myimage` seemingly does the expected behavior (it
pushes `thajeztah/myimage:latest` to Docker Hub), however, it does not so for the
reason expected (`:latest` being the default tag), but because `:latest` happens
to be the only tag present for the `thajeztah/myimage` image.
If another tag exists for the image:
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
thajeztah/myimage v1.0.0 b534869c81f0 41 hours ago 1.22MB
```
Running the same command (`docker push thajeztah/myimage`) will push _both_ images
to Docker Hub.
> Note that the behavior described above is currently not (clearly) documented;
> the `docker push` reference documentation (https://docs.docker.com/engine/reference/commandline/push/)
does not mention that omitting the tag will push all tags
This patch changes the default behavior, and if no tag is specified, `:latest` is
assumed. To push _all_ tags, a new flag (`-a` / `--all-tags`) is added, similar
to the flag that's present on `docker pull`.
With this change:
- `docker push myname/myimage` will be the equivalent of `docker push myname/myimage:latest`
- to push all images, the user needs to set a flag (`--all-tags`), so `docker push --all-tags myname/myimage:latest`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch:
docker push --quiet nosuchimage
docker.io/library/nosuchimage
echo $?
0
With this patch applied:
docker push --quiet nosuchimage:latest
An image does not exist locally with the tag: nosuchimage
echo $?
1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Comments should have a leading space unless the comment is
for special purposes (go:generate, nolint:)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Refactor code to allow mixed notation with -p flag.
Signed-off-by: Aleksander Piotrowski <apiotrowski312@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Reverses the order long-form port options when converted to short-form
to correctly match the documentation and `docker service create`.
Post change `-p published=8111,target=8112` is the equivalent of
`8111:8112`
Signed-off-by: Nick Adcock <nick.adcock@docker.com>
Update the list of overrides for table headers so that columns using split or
join will produce the correct table header.
Before this patch:
docker ps --format='table {{split .Names "/"}}'
[NAMES]
[unruffled_mclean]
[eloquent_meitner]
[sleepy_grothendieck]
With this patch applied:
docker ps --format='table {{split .Names "/"}}'
NAMES
[unruffled_mclean]
[eloquent_meitner]
[sleepy_grothendieck]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch, using a template that used templating functions (such as
`lower` or `json`) caused the command to fail in the pre-processor step (in
`buildContainerListOptions`):
docker ps --format='{{upper .Names}}'
template: :1:8: executing "" at <.Names>: invalid value; expected string
This problem was due to the pre-processing using a different "context" type than
was used in the actual template, and custom functions to not be defined when
instantiating the Go template.
With this patch, using functions in templates works correctly:
docker ps --format='{{upper .Names}}'
MUSING_NEUMANN
ELOQUENT_MEITNER
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move the remaining test with the others, and rename it from
`TestBuildContainerListOptions` to `TestContainerListBuildContainerListOptions`,
so that it has the same prefix as the other tests.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These subcommands were created to allow upgrading a Docker Community
engine to Docker Enterprise, but never really took off.
This patch removes the `docker engine` subcommands, as they added
quite some complexity / additional code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The top-level `docker deploy` command (using the "Docker Application Bundle"
(`.dab`) file format was introduced as an experimental feature in Docker 1.13 /
17.03, but superseded by support for Docker Compose files.
With no development being done on this feature, and no active use of the file
format, support for the DAB file format and the top-level `docker deploy` command
(hidden by default in 19.03), is removed in this patch, in favour of `docker stack deploy`
using compose files.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
Possible approach for client info
- split ClientInfo() into ClientInfo() and loadClientInfo()
- split ConfigFile() into ConfigFile() and loadConfigFile()
- ConfigFile() and ClientInfo() call their corresponding loadXX function
if it has not yet been loaded; this allows them to be used before
Initialize() was called.
- Initialize() *always* (re-)loads the configuration; this makes sure
that the correct configuration is used when actually calling commands.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/stack/kubernetes/convert_test.go:199:35: Using the variable on range scope `c` in function literal (scopelint)
conv, err := NewStackConverter(c.version)
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/container/create_test.go:120:20: Using the variable on range scope `c` in function literal (scopelint)
defer func() { c.ResponseCounter++ }()
^
cli/command/container/create_test.go:121:12: Using the variable on range scope `c` in function literal (scopelint)
switch c.ResponseCounter {
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/stack/kubernetes/watcher_test.go:44:20: Using a reference for the variable on range scope `obj` (scopelint)
if err := o.Add(&obj); err != nil {
^
cli/command/stack/kubernetes/watcher_test.go:49:20: Using a reference for the variable on range scope `obj` (scopelint)
if err := o.Add(&obj); err != nil {
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/cli_test.go:157:15: Using the variable on range scope `testcase` in function literal (scopelint)
pingFunc: testcase.pingFunc,
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/trust/key_load_test.go:121:27: Using the variable on range scope `keyID` in function literal (scopelint)
testLoadKeyFromPath(t, keyID, keyBytes)
^
cli/command/trust/key_load_test.go:176:32: Using the variable on range scope `keyBytes` in function literal (scopelint)
testLoadKeyTooPermissive(t, keyBytes)
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/context/create_test.go:270:31: Using the variable on range scope `c` in function literal (scopelint)
Name: c.name,
^
cli/command/context/create_test.go:271:31: Using the variable on range scope `c` in function literal (scopelint)
Description: c.description,
^
cli/command/context/create_test.go:272:31: Using the variable on range scope `c` in function literal (scopelint)
DefaultStackOrchestrator: c.orchestrator,
cli/command/context/create_test.go:346:31: Using the variable on range scope `c` in function literal (scopelint)
Name: c.name,
^
cli/command/context/create_test.go:347:31: Using the variable on range scope `c` in function literal (scopelint)
Description: c.description,
^
cli/command/context/create_test.go:348:31: Using the variable on range scope `c` in function literal (scopelint)
DefaultStackOrchestrator: c.orchestrator,
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/formatter/container_test.go:315:17: Error return value of `ContainerWrite` is not checked (errcheck)
ContainerWrite(context.context, containers)
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/cli_test.go:297:11: Error return value of `cli.Apply` is not checked (errcheck)
cli.Apply(
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/image/build.go:434:32: SA1006: printf-style function with dynamic format string and no further arguments should use print-style function instead (staticcheck)
fmt.Fprintf(dockerCli.Out(), imageID)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/utils.go:81:20: SA1006: printf-style function with dynamic format string and no further arguments should use print-style function instead (staticcheck)
fmt.Fprintf(outs, message)
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/trust/key_generate.go:91:30: SA1006: printf-style function with dynamic format string and no further arguments should use print-style function instead (staticcheck)
fmt.Fprintf(streams.Out(), err.Error())
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/service/update_test.go:31:16: SA1012: do not pass a nil Context, even if a function permits it; pass context.TODO if you are unsure about which Context to use (staticcheck)
updateService(nil, nil, flags, spec)
^
cli/command/service/update_test.go:535:16: SA1012: do not pass a nil Context, even if a function permits it; pass context.TODO if you are unsure about which Context to use (staticcheck)
updateService(nil, nil, flags, spec)
^
cli/command/service/update_test.go:540:16: SA1012: do not pass a nil Context, even if a function permits it; pass context.TODO if you are unsure about which Context to use (staticcheck)
updateService(nil, nil, flags, spec)
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Running `docker stack services <STACK> --orchestrator swarm would yield
the message "Noting found in stack: asdf" with an exit code 0. The same
command with kubernetes orchestrator would yield "nothing found in
stack: adsf" (note the lower-case "nothing") and a non-zero exit code.
This change makes the `stack services` command uniform for both
orchestrators. The logic of getting and printing services is split to
reuse the same formatting code.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.41 adds a new option to get the number of desired
and running tasks when listing services. This patch enables
this functionality, and provides a fallback mechanism when
the ServiceStatus is not available, which would be when
using an older API version.
Now that the swarm.Service struct captures this information,
the `ListInfo` type is no longer needed, so it is removed,
and the related list- and formatting functions have been
modified accordingly.
To reduce repetition, sorting the services has been moved
to the formatter. This is a slight change in behavior, but
all calls to the formatter performed this sort first, so
the change will not lead to user-facing changes.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch:
- Adds new GlobalService and ServiceStatus options
- Makes the NodeList() function functional
- Minor improvment to the `newService()` function to allow passing options
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/container/opts.go:700:37: Using a reference for the variable on range scope `n` (scopelint)
if err := applyContainerOptions(&n, copts); err != nil {
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/service/update.go:1007:43: Using a reference for the variable on range scope `entry` (scopelint)
if _, ok := portSet[portConfigToString(&entry)]; !ok {
^
cli/command/service/update.go:1008:32: Using a reference for the variable on range scope `entry` (scopelint)
portSet[portConfigToString(&entry)] = entry
^
cli/command/service/update.go:1034:44: Using a reference for the variable on range scope `port` (scopelint)
if _, ok := portSet[portConfigToString(&port)]; ok {
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This case was in a test in the engine repository, where
it is being removed, so add it to the list of existing
tests here.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch:
```
Usage: docker build [OPTIONS] PATH | URL | -
Build an image from a Dockerfile
Options:
--add-host list Add a custom host-to-IP mapping (host:ip)
--build-arg list Set build-time variables
--cache-from strings Images to consider as cache sources
--cgroup-parent string Optional parent cgroup for the container
--cpu-period int Limit the CPU CFS (Completely Fair Scheduler) period
--cpu-quota int Limit the CPU CFS (Completely Fair Scheduler) quota
-c, --cpu-shares int CPU shares (relative weight)
--cpuset-cpus string CPUs in which to allow execution (0-3, 0,1)
--cpuset-mems string MEMs in which to allow execution (0-3, 0,1)
--disable-content-trust Skip image verification (default true)
-f, --file string Name of the Dockerfile (Default is 'PATH/Dockerfile')
--force-rm Always remove intermediate containers
--iidfile string Write the image ID to the file
--isolation string Container isolation technology
--label list Set metadata for an image
-m, --memory bytes Memory limit
--memory-swap bytes Swap limit equal to memory plus swap: '-1' to enable unlimited swap
--network string Set the networking mode for the RUN instructions during build (default "default")
--no-cache Do not use cache when building the image
-o, --output stringArray Output destination (format: type=local,dest=path)
--platform string Set platform if server is multi-platform capable
--progress string Set type of progress output (auto, plain, tty). Use plain to show container output (default "auto")
--pull Always attempt to pull a newer version of the image
-q, --quiet Suppress the build output and print image ID on success
--rm Remove intermediate containers after a successful build (default true)
--secret stringArray Secret file to expose to the build (only if BuildKit enabled): id=mysecret,src=/local/secret
--security-opt strings Security options
--shm-size bytes Size of /dev/shm
--squash Squash newly built layers into a single new layer
--ssh stringArray SSH agent socket or keys to expose to the build (only if BuildKit enabled) (format: default|<id>[=<socket>|<key>[,<key>]])
-t, --tag list Name and optionally a tag in the 'name:tag' format
--target string Set the target build stage to build.
--ulimit ulimit Ulimit options (default [])
```
With this patch applied:
```
DOCKER_BUILDKIT=1 docker build --help
Usage: docker build [OPTIONS] PATH | URL | -
Build an image from a Dockerfile
Options:
--add-host list Add a custom host-to-IP mapping (host:ip)
--build-arg list Set build-time variables
--cache-from strings Images to consider as cache sources
--disable-content-trust Skip image verification (default true)
-f, --file string Name of the Dockerfile (Default is 'PATH/Dockerfile')
--iidfile string Write the image ID to the file
--isolation string Container isolation technology
--label list Set metadata for an image
--network string Set the networking mode for the RUN instructions during build (default "default")
--no-cache Do not use cache when building the image
-o, --output stringArray Output destination (format: type=local,dest=path)
--platform string Set platform if server is multi-platform capable
--progress string Set type of progress output (auto, plain, tty). Use plain to show container output (default "auto")
--pull Always attempt to pull a newer version of the image
-q, --quiet Suppress the build output and print image ID on success
--secret stringArray Secret file to expose to the build (only if BuildKit enabled): id=mysecret,src=/local/secret
--squash Squash newly built layers into a single new layer
--ssh stringArray SSH agent socket or keys to expose to the build (only if BuildKit enabled) (format: default|<id>[=<socket>|<key>[,<key>]])
-t, --tag list Name and optionally a tag in the 'name:tag' format
--target string Set the target build stage to build.
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
--stream was always experimental and this patch removes the functionality.
Users should enable BuildKit with DOCKER_BUILDKIT=1
Signed-off-by: Tibor Vass <tibor@docker.com>
The State field allows printing the container state without
additional information about uptime, healthcheck, etc.
With this patch, the container's state can be printed independently:
```bash
docker ps -a --format '{{.State}}'
running
paused
exited
created
```
```bash
docker ps -a --format 'table {{.Names}}\t{{.State}}\t{{.Status}}'
NAMES STATE STATUS
elastic_burnell running Up About a minute
pausie paused Up 5 minutes (Paused)
peaceful_stonebraker exited Exited (0) 10 hours ago
vigilant_shaw created Created
```
```bash
docker ps -a --format 'raw'
container_id: 0445f73f3a71
image: docker-cli-dev
command: "ash"
created_at: 2019-07-12 11:16:11 +0000 UTC
state: running
status: Up 2 minutes
names: elastic_burnell
labels:
ports:
container_id: 1aff69a3912c
image: nginx:alpine
command: "nginx -g 'daemon of ..."
created_at: 2019-07-12 11:12:10 +0000 UTC
state: paused
status: Up 6 minutes (Paused)
names: pausie
labels: maintainer=NGINX Docker Maintainers <docker-maint@nginx.com>
ports: 80/tcp
container_id: d48acf66c318
image: alpine:3.9.3
command: "id -u"
created_at: 2019-07-12 00:52:17 +0000 UTC
state: exited
status: Exited (0) 10 hours ago
names: peaceful_stonebraker
labels:
ports:
container_id: a0733fe0dace
image: b7b28af77ffe
command: "/bin/sh -c '#(nop) ..."
created_at: 2019-07-12 00:51:29 +0000 UTC
state: created
status: Created
names: vigilant_shaw
labels:
ports:
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This partially reverts e0b59ab52b,
and does not automatically disable proxying signals in TTY-mode
Before this change:
------------------------------------
Start a container with a TTY in one shell:
```
docker run -it --init --name repro-28872 busybox sleep 30
```
then, in another shell, kill the docker cli:
```
kill `pgrep -f repro-28872`
```
Notice that the CLI was killed, but the signal not forwarded to the container;
the container continues running
```
docker container inspect --format '{{ .State.Status }}' repro-28872
running
docker container rm -f repro-28872
```
After this change:
------------------------------------
Start a container with a TTY in one shell:
```
docker run -it --init --name repro-28872 busybox sleep 30
```
then, in another shell, kill the docker cli:
```
kill `pgrep -f repro-28872`
```
Verify that the signal was forwarded to the container, and the container exited
```
docker container inspect --format '{{ .State.Status }}' repro-28872
exited
docker container rm -f repro-28872
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This code was attempting to check Linux file permissions
to determine if the key was accessible by other users, which
doesn't work, and therefore prevented users on Windows
to load keys.
Skipping this check on Windows (correspinding tests
were already skipped).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For backward compatibility: if no custom options are provided for the network,
and only a single network is specified, omit the endpoint-configuration
on the client (the daemon will still create it when creating the container)
This fixes an issue on older versions of legacy Swarm, which did not support
`NetworkingConfig.EndpointConfig`.
This was introduced in 5bc09639cc (#1767)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds capabilities to import a .zip file with importZip.
Detects the content type of source by checking bytes & DetectContentType.
Adds LimitedReader reader, a fork of io.LimitedReader,
was needed for better error messaging instead of just getting back EOF.
We are using limited reader to avoid very big files causing memory issues.
Adds a new file size limit for context imports,
this limit is used for the main file for .zip & .tar and individual compressed
files for .zip.
Added TestImportZip that will check the import content type
Then will assert no err on Importing .zip file
Signed-off-by: Goksu Toprak <goksu.toprak@docker.com>
This is less of a layering violation and removes some ugly hardcoded
`"kubernetes"` strings which were needed to avoid an import loop.
Signed-off-by: Ian Campbell <ijc@docker.com>
This removes the need for the core context code to import
`github.com/docker/cli/cli/context/kubernetes` which in turn reduces the
transitive import tree in this file to not pull in all of Kubernetes.
Note that this means that any calling code which is interested in the
kubernetes endpoint must import `github.com/docker/cli/cli/context/kubernetes`
itself somewhere in order to trigger the dynamic registration. In practice
anything which is interested in Kubernetes must import that package (e.g.
`./cli/command/context.list` does for the `EndpointFromContext` function) to do
anything useful, so this restriction is not too onerous.
As a special case a small amount of Kubernetes related logic remains in
`ResolveDefaultContext` to handle error handling when the stack orchestrator
includes Kubernetes. In order to avoid a circular import loop this hardcodes
the kube endpoint name.
Similarly to avoid an import loop the existing `TestDefaultContextInitializer`
cannot continue to unit test for the Kubernetes case, so that aspect of the
test is carved off into a very similar test in the kubernetes context package.
Lastly, note that the kubernetes endpoint is now modifiable via
`WithContextEndpointType`.
Signed-off-by: Ian Campbell <ijc@docker.com>
These are needed by any dynamically registered (via
`RegisterDefaultStoreEndpoints`) endpoint type to write a useful/sensible unit
test.
Signed-off-by: Ian Campbell <ijc@docker.com>
Previously an endpoint registered using `RegisterDefaultStoreEndpoints` would
not be taken into consideration by `resolveDefaultContext` and so could not
provide any details.
Resolve this by passing a `store.Config` to `resolveDefaultContext` and using
it to iterate over all registered endpoints. Any endpoint can ensure that their
type implements the new `EndpointDefaultResolver` in order to provide a default.
The Docker and Kubernetes endpoints are special cased, shortly the Kubernetes
one will be refactored to be dynamically registered.
Signed-off-by: Ian Campbell <ijc@docker.com>
The comment on `github.com/docker/cli/kubernetes.NewKubernetesConfig` said:
// Deprecated: Use github.com/docker/compose-on-kubernetes/api.NewKubernetesConfig instead
By making this switch in `github.com/docker/cli/context/kubernetes/load.go` we
break a vendoring chain:
`github.com/docker/cli/cli/command`
→ `vendor/github.com/docker/cli/cli/context/kubernetes/load.go`
→ `vendor/github.com/docker/cli/kubernetes`
→ `github.com/docker/compose-on-kubernetes/api/compose/...`
This means that projects which just want `github.com/docker/cli/cli/command`
(which is itself pulled in transitively by
`github.com/docker/cli/cli-plugins/plugin`) which do not themselves need the
compose-on-kubernetes API avoid a huge pile of transitive dependencies.
On one of my private projects the diff on the vendor dir is:
280 files changed, 21 insertions(+), 211346 deletions(-)
and includes dropping:
* `github.com/docker/compose-on-kubernetes/api/compose/{clone,impersonation}`
* `github.com/docker/compose-on-kubernetes/api/compose/{v1alpha3,v1beta1,v1beta2,v1beta3}`
* `github.com/google/btree`
* `github.com/googleapis/gnostic`
* `github.com/gregjones/httpcache`
* `github.com/peterbourgon/diskv`
* `k8s.io/api/*` (_lots_ of subpackages)
* `k8s.io/client-go/{discovery,kubernetes/scheme}`
and I've gone from:
$ du -sh vendor/k8s.io/
8.1M vendor/k8s.io/
to:
$ du -sh vendor/k8s.io/
2.1M vendor/k8s.io/
(overall I went from 36M → 29M of vendor dir for this particular project)
The change to `cli/command/system/version.go` is just for consistency and
allows us to drop the now unused alias.
Signed-off-by: Ian Campbell <ijc@docker.com>
Refactor `RunCreate` slightly so that all three paths always produce the same
output, namely the name of the new context of `stdout` (for scripting) and the
success log message on `stderr`.
Validate by extending the existing unit tests to always check the output is as
expected.
Signed-off-by: Ian Campbell <ijc@docker.com>
- Follows the proposal on issue [#34394](https://github.com/moby/moby/issues/34394)
- Maintains current behavior as default (Pull image if missing)
- Adds tristate flag allowing modification (PullMissing, PullAlways, PullNever)
Signed-off-by: Zander Mackie <zmackie@gmail.com>
With this patch it is possible to alias an existing allowed command.
At the moment only builder allows an alias.
This also properly puts the build command under builder, instead of image
where it was for historical reasons.
Signed-off-by: Tibor Vass <tibor@docker.com>
This is to make it easier to implement support for exporting contexts in
3rd party code, or to create mocks in tests.
2 exemples where it simplify things:
- docker-app desktop-specific context decorator (which rewrites parts of
the docker context to simplify UX when using on Docker Desktop contexts)
- ucp for including a context in the connection bundle
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
This change refines the warning message returned during docker login to
only warn for unencrypted storage when the users password is being stored.
If the remote registry supports identity tokens, omit the warning,
since those tokens can be independently managed and revoked.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
The github.com/flynn-archive/go-shlex package is a fork of Google/shlex,
and the repository is now archived, so let's switch to the maintained
version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds tests for setting and updating swarm service CredentialSpecs,
especially when using a Config as a credential spec.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Updates the CredentialSpec handling code for services to allow using
swarm Configs.
Additionally, fixes a bug where the `--credential-spec` flag would not
be respected on service updates.
Signed-off-by: Drew Erny <drew.erny@docker.com>
This regroup all Kubernetes extra fields for compose-on-kubernetes
v1alpha3 in a single x-kubernetes object.
Also use the same naming scheme as cap_add etc. for fiels inside this
object.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
On the server v0.4.21 has introduced a better way of dealing with
intra-stack networking: if the user can specify a list of endpoints
exposed internally, we now can setup a ClusterIP for this to avoid the
pitfalls of DNS-based load balancing.
This exposes the feature using the "Expose" compose field, and adds an
extra x-internal-service-type field to explicitly define how intra-stack
networking is handled on a service.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
For clarity, on `docker context use` or `docker context ls`, this adds a
warning if the DOCKER_HOST variable is set because it overrides the
active context.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
This allows setting the ip/ipv6 address as an option in the
advanced `--network` syntax;
```
docker run --network name=mynetwork,ip=172.20.88.22,ip6=2001:db8::8822
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This refactors the way networking options are parsed, and makes the
client able to pass options for multiple networks. Currently, the
daemon does not yet accept multiple networks when creating a container,
and will produce an error.
For backward-compatibility, the following global networking-related
options are associated with the first network (in case multiple
networks are set);
- `--ip`
- `--ip6`
- `--link`
- `--link-local-ip`
- `--network-alias`
Not all of these options are supported yet in the advanced notation,
but for options that are supported, setting both the per-network option
and the global option will produce a "conflicting options" error.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The commit contains cli changes to support driver options for a network in
docker run and docker network connect cli's. The driver-opt, aliases is now
supported in the form of csv as per network option in service commands in
swarm mode since docker/cli#62 . This commit extends this support to docker
run command as well.
For docker connect command `--driver-opt` is added to pass driver specific
options for the network the container is connecting to.
Signed-off-by: Abhinandan Prativadi <abhi@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
--from creates a context from a named context.
By default `context create` will create a context from the current context.
Replaced "from-current=" docker/kubernetes option with "from=" to allow specifying which context to copy the settings from.
Signed-off-by: Nick Adcock <nick.adcock@docker.com>
Old selector was wrong (it watched for the label we applied to child
resources when reconciling the stack, instead of the stack itself)
This should be back-ported to older version of the CLI
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
bump required:
- replacing vendor ghodss/yaml with sigs.k8s.io/yaml
- adding vendor k8s.io/klog and github.com/evanphx
- compose-on-kubernetes
removed 'IncludeUninitialized' from watch as it have been removed from k8s
Signed-off-by: Nick Adcock <nick.adcock@docker.com>
Instead of using an `if else if else`, switch to a sequence of independent
`if` blocks containing a `return`.
Instead of defining a return variable and updating it in the `if` blocks
and returning at the end, make each `if` block return the desired value
independenly.
Signed-off-by: David Scott <dave.scott@docker.com>
Previously if the Docker engine was not running the behaviour of
commands would vary depending on whether the --debug flag was provided.
For example, consider `docker logout`:
$ docker logout
Not logged in to
-- note the missing server URL
$ docker --debug logout
Warning: failed to get default registry endpoint from daemon (Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?). Using system default: https://index.docker.io/v1/
Not logged in to https://index.docker.io/v1/
-- note the server URL is present
This patch makes only the debug printing conditional on the `--debug` flag,
not the return value.
Signed-off-by: David Scott <dave.scott@docker.com>
As pointed out in #1459, docker cli fails to detect that the input is a tarball,
in case it is generated by `git archive --format=tgz`.
This happens because `git archive` adds some metadata to the initial tar header,
and so it is more than 1 block (of 512 bytes) long, while we only provide 1 block
to archive/tar.Next() and it fails.
To fix, give it 2 blocks :)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This adds validation to `docker container run` / `docker container create`;
Validation of labels provided through flags was removed in 31dc5c0a9a,
after the validation was changed to fix labels without values, and to prevent
labels from being expanded with environment variables in 2b17f4c8a8
However, now empty label names from _files_ (`--label-file`) followed different
validation rules than labels passed through `--label`.
This patch adds back minimal validation for labels passed through the command-line
Before this patch:
```bash
docker container create \
--name label \
--label==with-leading-equal-sign \
--label=without-value \
--label=somelabel=somevalue \
--label " = " \
--label=with-quotes-in-value='{"foo"}' \
--label='with"quotes"in-key=test' \
busybox
docker container inspect --format '{{json .Config.Labels}}' label
```
```json
{
"": "with-leading-equal-sign",
" ": " ",
"somelabel": "somevalue",
"with\"quotes\"in-key": "test",
"with-quotes-in-value": "{\"foo\"}",
"without-value": ""
}
```
After this patch:
```bash
docker container create \
--name label \
--label==with-leading-equal-sign \
--label=without-value \
--label=somelabel=somevalue \
--label " = " \
--label=with-quotes-in-value='{"foo"}' \
--label='with"quotes"in-key=test' \
busybox
invalid argument "=with-leading-equal-sign" for "-l, --label" flag: invalid label format: "=with-leading-equal-sign"
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch fixes a bug where labels use the same behavior as `--env`, resulting
in a value to be copied from environment variables with the same name as the
label if no value is set (i.e. a simple key, no `=` sign, no value).
An earlier pull request addressed similar cases for `docker run`;
2b17f4c8a8, but this did not address the
same situation for (e.g.) `docker service create`.
Digging in history for this bug, I found that use of the `ValidateEnv`
function for labels was added in the original implementation of the labels feature in
abb5e9a077 (diff-ae476143d40e21ac0918630f7365ed3cR34)
However, the design never intended it to expand environment variables,
and use of this function was either due to either a "copy/paste" of the
equivalent `--env` flags, or a misunderstanding (the name `ValidateEnv` does
not communicate that it also expands environment variables), and the existing
`ValidateLabel` was designed for _engine_ labels (which required a value to
be set).
Following the initial implementation, other parts of the code followed
the same (incorrect) approach, therefore leading the bug to be introduced
in services as well.
This patch:
- updates the `ValidateLabel` to match the expected validation
rules (this function is no longer used since 31dc5c0a9a),
and the daemon has its own implementation)
- corrects various locations in the code where `ValidateEnv` was used instead of `ValidateLabel`.
Before this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker service inspect --format '{{json .Spec.Labels}}' test
{"SOME_ENV_VAR":"I_AM_SOME_ENV_VAR"}
```
After this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker container inspect --format '{{json .Config.Labels}}' test
{"SOME_ENV_VAR":""}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The warning, printed before running `docker system prune` was printing the
filters in JSON format.
This patch attempts to make the output human readable;
- updating the code, and template to print filters individually
- reducing the indentation (which was quite deep)
Before this patch was applied;
```
docker system prune --filter until=24h --filter label=hello-world --filter label!=foo=bar --filter label=bar=baz
WARNING! This will remove:
- all stopped containers
- all networks not used by at least one container
- all dangling images
- all dangling build cache
- Elements to be pruned will be filtered with:
- label={"label":{"bar=baz":true,"hello-world":true},"label!":{"foo=bar":true},"until":{"24h":true}}
Are you sure you want to continue? [y/N]
```
With this patch applied;
```
WARNING! This will remove:
- all stopped containers
- all networks not used by at least one container
- all dangling images
- all dangling build cache
Items to be pruned will be filtered with:
- label!=foo=bar
- label!=never=remove-me
- label=bar=baz
- label=hello-world
- label=remove=me
- until=24h
Are you sure you want to continue? [y/N]
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The warning, printed before runing docker system prune was missing any filter
that was set in the configuration file. In addition, the warning prefixes the
filters with `label=`, which is no longer accurate, now that the prune command
also supports "until" as a filter.
Before this change, only the filters set on the command-line were shown,
and any filter set in the configuration file was missing;
```
mkdir -p ./test-config
echo '{"pruneFilters": ["label!=never=remove-me", "label=remove=me"]}' > test-config/config.json
docker --config=./test-config system prune --filter until=24h --filter label=hello-world --filter label!=foo=bar --filter label=bar=baz
WARNING! This will remove:
- all stopped containers
- all networks not used by at least one container
- all dangling images
- all dangling build cache
- Elements to be pruned will be filtered with:
- label={"label":{"bar=baz":true,"hello-world":true},"label!":{"foo=bar":true},"until":{"24h":true}}
Are you sure you want to continue? [y/N]
```
With this patch applied, both options from the commandline and options set
in the configuration file are shown;
```
mkdir -p ./test-config
echo '{"pruneFilters": ["label!=never=remove-me", "label=remove=me"]}' > test-config/config.json
docker --config=./test-config system prune --filter until=24h --filter label=hello-world --filter label!=foo=bar --filter label=bar=baz
WARNING! This will remove:
- all stopped containers
- all networks not used by at least one container
- all dangling images
- all dangling build cache
- Elements to be pruned will be filtered with:
- filter={"label":{"bar=baz":true,"hello-world":true,"remove=me":true},"label!":{"foo=bar":true,"never=remove-me":true},"until":{"24h":true}}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- when using "--context default" parameter
- when printing the list of contexts
- when exporting the default context to a tarball
Signed-off-by: Jean-Christophe Sirot <jean-christophe.sirot@docker.com>
(+1 squashed commit)
Squashed commits:
[20670495] Fix CLI initialization for the `docker stack deploy --help` command and ensure that the dockerCli.CurrentContext() always returns a non empty context name (default as a fallback)
Remove now obsolete code handling empty string context name
Minor code cleanup
Signed-off-by: Jean-Christophe Sirot <jean-christophe.sirot@docker.com>
This happens on Windows when dialing a named pipe (a path which is used by CLI
plugins), in that case some debugging shows:
DEBU[0000] conn is a *winio.win32MessageBytePipe
DEBU[0000] conn is a halfReadCloser: false
DEBU[0000] conn is a halfWriteCloser: true
the raw stream connection does not implement halfCloser
In such cases we can simply wrap with a nop function since closing for read
isn't too critical.
Signed-off-by: Ian Campbell <ijc@docker.com>
The `conn` here is `*winio.win32MessageBytePipe` which does not have a
`CloseRead` method (it does have `CloseWrite`) resulting in:
docker@WIN-NUC0 C:\Users\docker>.\docker-windows-amd64.exe system dial-stdio
the raw stream connection does not implement halfCloser
Also disable the path which uses this for cli-plugins on Windows.
Signed-off-by: Ian Campbell <ijc@docker.com>
This means that plugins can use whatever methods the monolithic CLI supports,
which is good for consistency.
This relies on `os.Args[0]` being something which can be executed again to
reach the same binary, since it is propagated (via an envvar) to the plugin for
this purpose. This essentially requires that the current working directory and
path are not modified by the monolithic CLI before it launches the plugin nor
by the plugin before it initializes the client. This should be the case.
Previously the fake apiclient used by `TestExperimentalCLI` was not being used,
since `cli.Initialize` was unconditionally overwriting it with a real one
(talking to a real daemon during unit testing, it seems). This wasn't expected
nor desirable and no longer happens with the new arrangements, exposing the
fact that no `pingFunc` is provided, leading to a panic. Add a `pingFunc` to
the fake client to avoid this.
Signed-off-by: Ian Campbell <ijc@docker.com>
Fairly straight forward. It became necessary to wrap `Plugin.Err` with a type
which implements `encoding.MarshalText` in order to have that field rendered
properly in the `docker info -f '{{json}}'` output.
Since I changed the type somewhat I also added a unit test for `formatInfo`.
Signed-off-by: Ian Campbell <ijc@docker.com>
- The `/build/prune` endpoint was added in API v1.31
- The `/network` endpoints were added in API v1.21
This patch hides these commands on older API versions
Before this change:
```
DOCKER_API_VERSION=1.0 docker
...
Management Commands:
builder Manage builds
container Manage containers
image Manage images
manifest Manage Docker image manifests and manifest lists
network Manage networks
system Manage Docker
trust Manage trust on Docker images
```
After this change
```
DOCKER_API_VERSION=1.0 docker
...
Management Commands:
container Manage containers
image Manage images
manifest Manage Docker image manifests and manifest lists
system Manage Docker
trust Manage trust on Docker images
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I authored this for `contentTrustEnabled` prior to 7f207f3f95, so this now
tests the funcation argument version.
Signed-off-by: Ian Campbell <ijc@docker.com>
This helps to avoid circular includes, by separating the pure data out from the
actual functionality in the cli subpackage, allowing other code which is
imported to access the data.
Signed-off-by: Ian Campbell <ijc@docker.com>
All of the current callers follow the pattern:
dockerPreRun(opts)
err := dockerCli.Initialize(opts) ...
So there is no semantic change into merging the content of `dockerPreRun` into the head of `Initialize`.
I'm about to add a new caller outside of the `cmd/docker` package and this
seems preferable exporting `DockerPreRun`.
Signed-off-by: Ian Campbell <ijc@docker.com>
This will allow plugins to have custom typed endpoints, as well as
create/remove/update contexts with the exact same results as the main
CLI (thinking of things like `docker ee login https://my-ucp-server
--context ucp-prod)`
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
That is, reindent the two sections by one space.
While the code was done by hand the `.golden` files had the extra space
inserted with emacs' `string-insert-rectangle` macro to (try to) avoid possible
manual errors. The docs were edited the same way.
Signed-off-by: Ian Campbell <ijc@docker.com>
Right now the only client side info we have is whether debug is enabled, but we
expect more in the future.
We also preemptively prepare for the possibility of multiple errors when
gathering both daemon and client info.
Signed-off-by: Ian Campbell <ijc@docker.com>
Proxies configured in config.json were only taking effect
when using `docker run`, but were being ignored when
using `docker create`.
Before this change:
echo '{"proxies":{"default":{"httpProxy":"httpProxy","httpsProxy":"httpsProxy","noProxy":"noProxy","ftpProxy":"ftpProxy"}}}' > config.json
docker inspect --format '{{.Config.Env}}' $(docker --config=./ create busybox)
[PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin]
With this change applied:
echo '{"proxies":{"default":{"httpProxy":"httpProxy","httpsProxy":"httpsProxy","noProxy":"noProxy","ftpProxy":"ftpProxy"}}}' > config.json
docker inspect --format '{{.Config.Env}}' $(docker --config=./ create busybox)
[NO_PROXY=noProxy no_proxy=noProxy FTP_PROXY=ftpProxy ftp_proxy=ftpProxy HTTP_PROXY=httpProxy http_proxy=httpProxy HTTPS_PROXY=httpsProxy https_proxy=httpsProxy PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin]
Reported-by: Silvano Cirujano Cuesta <Silvanoc@users.noreply.github.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `DOCKER_HIDE_LEGACY_COMMANDS` environment variable allows hiding legacy
top-level commands that are now available under `docker <object> <verb>`. The
`docker deploy` top-level command is experimental, and replaced by
`docker stack deploy`.
This patch hides the top-level `docker deploy` if the `DOCKER_HIDE_LEGACY_COMMANDS`
environment variable is set.
Before this change:
DOCKER_HIDE_LEGACY_COMMANDS=1 docker --help
...
Commands:
build Build an image from a Dockerfile
deploy Deploy a new stack or update an existing stack
login Log in to a Docker registry
logout Log out from a Docker registry
run Run a command in a new container
search Search the Docker Hub for images
version Show the Docker version information
...
With this patch applied:
DOCKER_HIDE_LEGACY_COMMANDS=1 docker --help
...
Commands:
build Build an image from a Dockerfile
login Log in to a Docker registry
logout Log out from a Docker registry
run Run a command in a new container
search Search the Docker Hub for images
version Show the Docker version information
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This PR adds a store to the CLI, that can be leveraged to persist and
retrieve credentials for various API endpoints, as well as
context-specific settings (initially, default stack orchestrator, but we
could expand that).
This comes with the logic to persist and retrieve endpoints configs
for both Docker and Kubernetes APIs.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Add `--quiet` to the `docker image pull` subcommand that will not pull
the image quietly.
```
$ docker pull -q golang
Using default tag: latest
```
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Previously, these errors were only printed when using `docker run`, but were
omitted when using `docker container create` and `docker container start`
separately.
Given that these warnings apply to both situations, this patch moves generation
of these warnings to `docker container create` (which is also called by
`docker run`)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A while ago, Docker split the "Domainname" field out from the "Hostname"
field for the container configuration. There was no real user-visible
change associated with this (and under the hood "Domainname" was mostly
left unused from the command-line point of view). We now add this flag
in order to match other proposed changes to allow for setting the NIS
domainname of a container.
This also includes a fix for the --hostname parsing tests (they would
not error out if only one of .Hostname and .Domainname were incorrectly
set -- which is not correct).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
This PR chnages allow user to configure data path
port number. By default we use 4789 port number. But this commit
will allow user to configure port number during swarm init.
Data path port can't be modified after swarm init.
Signed-off-by: selansen <elango.siva@docker.com>
A recent change in moby/moby made tests with missing client mocks fail with panic.
This adds those missing mocks for the impacted tests.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
- make it possible to extract the formatter implementation from the
"common" code, that way, the formatter package stays small
- extract some formatter into their own packages
This is essentially moving the "formatter" implementation of each type
in their respective packages. The *main* reason to do that, is to be
able to depend on `cli/command/formatter` without depending of the
implementation detail of the formatter. As of now, depending on
`cli/command/formatter` means we depend on `docker/docker/api/types`,
`docker/licensing`, … — that should not be the case. `formatter`
should hold the common code (or helpers) to easily create formatter,
not all formatter implementations.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Avoid testing for session support in non-buildkit builder to support
servers that falsely report as `1.39` compatible
Signed-off-by: Tibor Vass <tibor@docker.com>
gofmt/goimports changed some heuristics in 1.11 and the code is now
formatted slightly differently.
No functional change, just whitespace.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Unlike `docker build --secret`, `docker build --ssh` allows the build container to
use SSH keys with passphrases.
$ eval $(ssh-agent)
$ ssh-add ~/.ssh/id_rsa
(Input your passphrase here)
$ docker build --ssh default=$SSH_AUTH_SOCK ...
This feature requires the daemon with `CapExecMountSSH` build capability (moby/moby#37973) .
Currently, the official Dockerfile frontend does not provide the syntax for using the SSH forwarder.
However, the experimental `RUN --mount=type=ssh` syntax can be enabled by using
the Dockerfile frontend image built with the `BUILDTAGS="dfrunmount dfssh"`, via the `# syntax =` "shebang".
The Dockerfile for the Dockerfile frontend is available at github.com/moby/buildkit/frontend/dockerfile/cmd/dockerfile-frontend)
The pre-built image is also available as `tonistiigi/dockerfile:ssh20181002` .
An example Dockerfile with `RUN --mount=type=ssh`:
# syntax = tonistiigi/dockerfile:ssh20181002
FROM alpine
RUN apk add --no-cache openssh-client
RUN mkdir -p -m 0700 ~/.ssh && ssh-keyscan gitlab.com >> ~/.ssh/known_hosts
RUN --mount=type=ssh ssh git@gitlab.com | tee /hello
# "Welcome to GitLab, @GITLAB_USERNAME_ASSOCIATED_WITH_SSHKEY" should be printed here
More info available at moby/buildkit#608, moby/buildkit#655
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit 92932647d3)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Prior refactoring passes missed a corner case.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit dee37936e5)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
During the refactoring for 18.09 the activate/update flows no longer
restart the engine explicitly but let the user do that when they're ready,
so the health check logic is no longer required.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit f2b2061cc3)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a follow up PR to #1381 to address some of the review comments
we didn't get to.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit c12e23a4c1)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Sebastiaan van Stijn
Sebastiaan van Stijn
Akihiro Suda
Drew Erny
Silvin Lubecki
Dominik Braun
Andrii Berehuliak
Rob Gulewich
Rahul Zoldyck
Aleksander Piotrowski
Nick Adcock
Brian Goff
Tibor Vass
Justyn Temme
Tibor Vass
Anca Iordache
Silvin Lubecki
Samuel Cochran
Jonatas Baldin
Djordje Lukic
Derskeal
Sam
Carlos de Paula
Paweł Szczekutowicz
knqyf263
Nicolas De Loof
Vincent Demeester
Goksu Toprak
Ian Campbell
Zander Mackie
Ravi Shekhar Jethani
Tõnis Tiigi
Simon Ferquel
Daniel Hiltgen
Drew Erny
Mårten Cassel
Abhinandan Prativadi
David Scott
Sune Keller
Nao YONASHIRO
Akihiro Suda
Lifubang
Kir Kolyshkin
Sunny
Stephane Jeandeaux
Jean-Christophe Sirot
Elliot Luo
Ryan Zhang
Olli Janatuinen
Philipp Schmied
John Howard
Jérémie Drouet
Aleksa Sarai
selansen
Li Yi