This adds a small C binary for fighting zombies. It is mounted under
`/dev/init` and is prepended to the args specified by the user. You
enable it via a daemon flag, `dockerd --init`, as it is disable by
default for backwards compat.
You can also override the daemon option or specify this on a per
container basis with `docker run --init=true|false`.
You can test this by running a process like this as the pid 1 in a
container and see the extra zombie that appears in the container as it
is running.
```c
int main(int argc, char ** argv) {
pid_t pid = fork();
if (pid == 0) {
pid = fork();
if (pid == 0) {
exit(0);
}
sleep(3);
exit(0);
}
printf("got pid %d and exited\n", pid);
sleep(20);
}
```
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Because we standardize on using a non-privileged
prompt (`$`) instead of `#`, replacing the
examples to use `sudo` instead to indicate
this has to be run as root.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "format" example got lost during the
rewrite of the documentation for Cobra. This
restores the missing example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Several other places in the document it states that when using the shell
form of ENTRYPOINT, CMD and command line arguments are ignored. That is
accurate, this table was not. It is now.
Signed-off-by: David Dooling <dooling@gmail.com>
The restriction is no longer necessary given changes at the runc layer
related to mount options of the rootfs. Also cleaned up the docs on
restrictions left for userns enabled mode. Re-enabled tests related to
--read-only when testing a userns-enabled daemon in integration-cli.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This may take some time, but start by pointing people at
LABEL instead.
MAINTAINER predates general LABEL and has basically no tooling,
only allows a single item to be added, and is has been
unofficially deprecated for some time, with many images not
including it, but we have never specifically said that it
should be replaced by LABEL as a better more generic metadata
solution.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
The indexing of steps in the output of `docker build` starts with `Step 1`.
However, there are several places in the docs that start with `Step 0`.
This fix addresses the issue and changes `Step 0` to `Step 1` (and subsequent steps).
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
When xfs filesystem is being used on top of thin pool, xfs can get ENOSPC
errors from thin pool when thin pool is full. As of now xfs retries the
IO and keeps on retrying and does not give up. This can result in container
application being stuck for a very long time. In fact I have seen instances
of unkillable processes. So that means once thin pool is full and process
gets stuck, container can't be stopped/killed either and only option left
seems to be power recycle of the box.
In another instance, writer did not block but failed after a while. But
when I tried to exit/stop the container, unmounting xfs hanged and only
thing I could do was power cycle the machine.
Now upstream kernel has committed patches where it allows user space to
customize user space behavior in case of errors. One of the knobs is
max_retries, which specifies how many times an IO should be retried
when ENOSPC is encountered.
This patch sets provides a tunable knob (dm.xfs_nospace_max_retries) so
that user can specify value for max_retries and tune xfs behavior. If
one sets this value to 0, xfs will not retry IO when ENOSPC error is
encountered. It will instead give up and shutdown filesystem.
This knob can be useful if one is running into unkillable
processes/containers issue on top of xfs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
As is raised in 26312, in `docker network ls`, the help output was
mistaken to `volume names`:
```
-q, --quiet Only display volume names
```
This fix changes the help output to:
```
-q, --quiet Only display network IDs
```
This fix also updates the documentation in:
`docs/reference/commandline/network_ls.md`
This fix fixes 26312.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 25304 to support
`--group-add` and `--group-rm` in `docker service create`.
This fix adds `--group-add` to `docker service create` and `docker service update`,
adds `--group-rm` to `docker service update`.
This fix updates docs for `docker service create` and `docker service update`:
1. Add `--group-add` to `docker service create` and `docker service update`
2. Add `--group-rm` to `docker service update`
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Since 20848 has been merged and both `docker create` and
`docker run` share the same `runconfig` parser, now both
`docker run` and `docker create` allow to specify the
`--rm` flag. However, docs for `docker create` has not
been udpated yet.
This fix updates docs for `docker create` so that `--rm`
flag has been included.
This fix is related to 20848 and 25577.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Add sentece to RUN, CMD, and ENTRYPOINT exec sections making it clear
that it is the shell doing the environment variable expansion.
Signed-off-by: David Dooling <dooling@gmail.com>
The Dockerfile parser does not subsitute ENV variables in any form of
the ENTRYPOINT command. Any substitution, if done, is done by the shell
when the command is executed.
Signed-off-by: David Dooling <dooling@gmail.com>
This fix tries to address the issue in raised #23367 where an out-of-band
volume driver deletion leaves some data in docker. This prevent the
reuse of deleted volume names (by out-of-band volume driver like flocker).
This fix adds a `--force` field in `docker volume rm` to forcefully purge
the data of the volume that has already been deleted.
Related documentations have been updated.
This fix is tested manually with flocker, as is specified in #23367.
An integration test has also been added for the scenario described.
This fix fixes#23367.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This feature was added in docker 1.8, through
7491f9a9c11ad3fd3b587fa6f7e53b297b3b88c7.
However, the API docs ended up in the wrong
API version (1.19 instead of 1.20), so were
never included in future API docs.
Also, the CLI docs got lost during splitting
up the cli.md docs into separate files;
561bfb268de3c674b04d48895b7e46ae890ef795
This moves the API docs to the correct
versions, and restores the CLI documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"--restart" and "--rm" are conflict options, if a container is started
with AutoRemove flag, we should forbid the update action for its Restart
Policy.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This filter option was added in be045ee2da7c2c83e859d86cb496e86ec6de8566,
but didn't update the documentation and
man pages.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This example was added in b0b2f979c7c43e2975d5e39340c168da2da42d1d,
but got lost during splitting up the cli.md docs into separate files;
561bfb268de3c674b04d48895b7e46ae890ef795
This restores the missing example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The export command operates on containers, not images, so it should be listed under the container commands, not the image commands.
Signed-off-by: David Lechner <david@lechnology.com>
These flags were not supported (daemon returns an error), and it was an
oversight. They were not present in completion scripts.
Signed-off-by: Tibor Vass <tibor@docker.com>
This fix updates docs so that log-opts takes map (`{}`) instead
of `[]`, as is defined in the impmenetation (`map[string]string`)
This fix fixes 22311.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
commit 41d580c7a610d8111dc63353cbd94319ca854627 added
"Joined at" to the output of node inspect,
but I forgot that docs changes are needed.
This change updates the example output
of node inspect in the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Following #22729, enable to dynamically reload/remove the daemon
authorization plugins (via standard reloading mechanism).
https://docs.docker.com/engine/reference/commandline/daemon/#daemon-
configuration-file
Daemon must store a reference to the authorization middleware to refresh
the plugin on configuration changes.
Signed-off-by: Liron Levin <liron@twistlock.com>
this change improves the instructions for
swarm join-token and swarm init;
- only print the join-token command for workers
instead of for both managers and workers, to
prevent users from copying the wrong command.
An extra line is added to explain how to obtain
the manager token.
- print a message that a token was rotated
sucesfully if '--rotate' is used.
- add some extra white-space before / after
the join commands, to make copy/pasting
easier.
this change also does some refactoring of join-token;
- move flagname-constants together with other constants
- use variables for selected role ("worker" / "manager")
to prevent checking for them multiple times, and to
keep the "worker" / "manager" sting centralized
- add an extra blank line after "join-token" instructions
this makes it easier to copy, and cleans up the
code a tiny bit
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In `docker service create/update`, flag `--user` actually supports
`uid:gid` (same as `docker run`). However, this is not reflected
in the help and documentation yet.
This fix updates docs in `docker service create/update` to change
the description to `Username or UID (format: <name|uid>[:<group|gid>])`.
The help message output has also been updated.
This fix is related to 25304.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Swarm mode makes it possible through the API to set labels to containers
but not through command line. This tries to fix it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Instead reserve exit code 2 to be future proof, document that it should
not be used. Implementation-wise, it is considered as unhealthy, but
users should not rely on this as it may change in the future.
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Hostnames are not supported for now because libnetwork can't use them
for overlay networking yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Update documentation to account for the changes in #24952.
docs/swarm/swarm-tutorial/rolling-update.md doesn't need any changes,
but the CLI reference pages should show the current help text.
drain-node.md no longer needs to specify --update-parallelism 1 in its
example.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
f5e1f6f6880391a5a3399023cf93a3c48502e57d replaced "secrets"
with "join tokens", which also removed the "auto-accept"
policy.
This removes some remaining references to those features.
Note that there are other references, but those
are already addressed in another pull request.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
this improves the formatting, and code-highlighting
of the `docker ps` reference page, and wraps sentences
to 80 chars
also adds single quotes around the formatting
example for labels.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds documentation for "--log-driver" and "--log-opt"
for services.
Also updated the API docs to include the new
options, and generated a more complete JSON
example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the output/response slightly changed in
340964db1c8f161a2ad156023eb47dcc93bf804b,
and `:latest` is no longer required for
various actions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This renames the '--bundle' flag for docker (stack) deploy
to be consistent with 'docker build'.
Note that there's no shorthand '-f' added for now,
because this may be confusing on 'docker stack config',
which also takes a file, and for which we may want to
have a '--format' flag in future.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
this removes a copy/pasta whoopsie on my side,
introduced in de64324109d2694b1525e62b5c0072267282a36c
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- the constraint expression needs to be quoted
- add an actual redis container to run so the command line works
Signed-off-by: Anil Madhavapeddy <anil@docker.com>
The change to runc in https://github.com/opencontainers/runc/pull/789
was not documented previously. Also say what this affects and clean
up layout of initial table as there was some miscolouration of the
continuation lines.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Using tabs here seems to cause copy/paste problems in some terminals.
Using spaces is safer.
Fixes#24609
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds an `--oom-score-adjust` flag to the daemon so that the value
provided can be set for the docker daemon's process. The default value
for the flag is -500. This will allow the docker daemon to have a
less chance of being killed before containers do. The default value for
processes is 0 with a min/max of -1000/1000.
-500 is a good middle ground because it is less than the default for
most processes and still not -1000 which basically means never kill this
process in an OOM condition on the host machine. The only processes on
my machine that have a score less than -500 are dbus at -900 and sshd
and xfce( my window manager ) at -1000. I don't think docker should be
set lower, by default, than dbus or sshd so that is why I chose -500.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add a `--network` flag which replaces `--net` without deprecating it
yet. The `--net` flag remains hidden and supported.
Add a `--network-alias` flag which replaces `--net-alias` without deprecating
it yet. The `--net-alias` flag remains hidden and supported.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
Looks like there's issues with sourceforge project
pages. Given that sourceforge isn't really what
it used to be, trying to find alternative URLs
where possible.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "none" option was not added to the documentation.
This adds an example, and adds additional information
on manually accepting or rejecting a node.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add option to skip kernel check for older kernels which have been patched to support multiple lower directories in overlayfs.
Fixes#24023
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Kernel memory is not allowed to be updated if container is
running, it's not actually a precise kernel limitation.
Before kernel version 4.6, kernel memory will not be accounted
until kernel memory limit is set, if a container created with
kernel memory initialized, kernel memory is accounted as soon
as process created in container, so kernel memory limit update
is allowed afterward. If kernel memory is not initialized,
kernel memory consumed by processes in container will not be
accounted, so we can't update the limit because the account
will be wrong.
So update kernel memory of a running container with kernel memory
initialized is allowed, we should soften the limitation by docker.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
- Update ps with `--last` flag
- Update commands with current output
- Make sure hugo does not detect the wrong language
- Update usage for `tag` command to be more coherent with the other ones
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The current behavior of `docker swarm init` is to set up a swarm that
has no secret for joining, and does not require manual acceptance for
workers. Since workers may sometimes receive sensitive data such as pull
credentials, it makes sense to harden the defaults.
This change makes `docker swarm init` generate a random secret if none
is provided, and print it to the terminal. This secret will be needed to
join workers or managers to the swarm. In addition to improving access
control to the cluster, this setup removes an avenue for
denial-of-service attacks, since the secret is necessary to even create
an entry in the node list.
`docker swarm init --secret ""` will set up a swarm without a secret,
matching the old behavior. `docker swarm update --secret ""` removes the
automatically generated secret after `docker swarm init`.
Closes#23785
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
yuexiao-wang
Michael Crosby
Akihiro Suda
Sebastiaan van Stijn
Misty Stanley-Jones
John Howard
Alessandro Boch
Josh Bodah
David Dooling
Anusha Ragunathan
lixiaobing10051267
Phil Estes
Charles Smith
Justin Cormack
Yong Tang
Richard Mathie
zhouhao
frosforever
Vivek Goyal
Vincent Demeester
YuPengZTE
allencloud
ohmystack
Kris-Mikael Krister
Victor Vieux
Kara Alexandra
Arnaud Porterie (icecrime)
Rich Moyse
Mihai Borobocea
timfeirg
Zhang Wei
Josh Horwitz
David Lechner
Lei Jitang
Tibor Vass
Darren Stahl
Liron Levin
Kevin Richardson
Patrick Böänziger
Diogo Monica
Qiang Huang
Stephen J Day
Aaron Lehmann
Aanand Prasad
Nishant Totla
Dong Chen
Anil Madhavapeddy
Mei ChunTao
Derek McGowan
johnharris85
Dave Henderson