Swarm mode makes it possible through the API to set labels to containers
but not through command line. This tries to fix it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Instead reserve exit code 2 to be future proof, document that it should
not be used. Implementation-wise, it is considered as unhealthy, but
users should not rely on this as it may change in the future.
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
These docs have AuthzPlugin with a lower case 'z'. What the plugin
api is actually looking for is AuthZPlugin with an upper case 'Z'.
See 46e3a249a1/pkg/authorization/api.go (L5-L8)
Signed-off-by: Everett Toews <everett.toews@rackspace.com>
Hostnames are not supported for now because libnetwork can't use them
for overlay networking yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Update documentation to account for the changes in #24952.
docs/swarm/swarm-tutorial/rolling-update.md doesn't need any changes,
but the CLI reference pages should show the current help text.
drain-node.md no longer needs to specify --update-parallelism 1 in its
example.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
f5e1f6f6880391a5a3399023cf93a3c48502e57d replaced "secrets"
with "join tokens", which also removed the "auto-accept"
policy.
This removes some remaining references to those features.
Note that there are other references, but those
are already addressed in another pull request.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
At the moment docker's deprecation policy is 2 release cycles by
default, which is around 5 months. This may not be enough for
production environment and there is a need to extend the
deprecation cycle to 3 releases (see #24494).
This fix updates the docs/deprecated.md and extend the deprecation
cycle to 3 releases.
This fix is related to #24494 and #24534.
This fix fixes#24534.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
this improves the formatting, and code-highlighting
of the `docker ps` reference page, and wraps sentences
to 80 chars
also adds single quotes around the formatting
example for labels.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds documentation for "--log-driver" and "--log-opt"
for services.
Also updated the API docs to include the new
options, and generated a more complete JSON
example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the output/response slightly changed in
340964db1c8f161a2ad156023eb47dcc93bf804b,
and `:latest` is no longer required for
various actions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This renames the '--bundle' flag for docker (stack) deploy
to be consistent with 'docker build'.
Note that there's no shorthand '-f' added for now,
because this may be confusing on 'docker stack config',
which also takes a file, and for which we may want to
have a '--format' flag in future.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
this removes a copy/pasta whoopsie on my side,
introduced in de64324109d2694b1525e62b5c0072267282a36c
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- the constraint expression needs to be quoted
- add an actual redis container to run so the command line works
Signed-off-by: Anil Madhavapeddy <anil@docker.com>
The change to runc in https://github.com/opencontainers/runc/pull/789
was not documented previously. Also say what this affects and clean
up layout of initial table as there was some miscolouration of the
continuation lines.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Using tabs here seems to cause copy/paste problems in some terminals.
Using spaces is safer.
Fixes#24609
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds an `--oom-score-adjust` flag to the daemon so that the value
provided can be set for the docker daemon's process. The default value
for the flag is -500. This will allow the docker daemon to have a
less chance of being killed before containers do. The default value for
processes is 0 with a min/max of -1000/1000.
-500 is a good middle ground because it is less than the default for
most processes and still not -1000 which basically means never kill this
process in an OOM condition on the host machine. The only processes on
my machine that have a score less than -500 are dbus at -900 and sshd
and xfce( my window manager ) at -1000. I don't think docker should be
set lower, by default, than dbus or sshd so that is why I chose -500.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add a `--network` flag which replaces `--net` without deprecating it
yet. The `--net` flag remains hidden and supported.
Add a `--network-alias` flag which replaces `--net-alias` without deprecating
it yet. The `--net-alias` flag remains hidden and supported.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
Looks like there's issues with sourceforge project
pages. Given that sourceforge isn't really what
it used to be, trying to find alternative URLs
where possible.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "none" option was not added to the documentation.
This adds an example, and adds additional information
on manually accepting or rejecting a node.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add option to skip kernel check for older kernels which have been patched to support multiple lower directories in overlayfs.
Fixes#24023
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Kernel memory is not allowed to be updated if container is
running, it's not actually a precise kernel limitation.
Before kernel version 4.6, kernel memory will not be accounted
until kernel memory limit is set, if a container created with
kernel memory initialized, kernel memory is accounted as soon
as process created in container, so kernel memory limit update
is allowed afterward. If kernel memory is not initialized,
kernel memory consumed by processes in container will not be
accounted, so we can't update the limit because the account
will be wrong.
So update kernel memory of a running container with kernel memory
initialized is allowed, we should soften the limitation by docker.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
- Update ps with `--last` flag
- Update commands with current output
- Make sure hugo does not detect the wrong language
- Update usage for `tag` command to be more coherent with the other ones
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The current behavior of `docker swarm init` is to set up a swarm that
has no secret for joining, and does not require manual acceptance for
workers. Since workers may sometimes receive sensitive data such as pull
credentials, it makes sense to harden the defaults.
This change makes `docker swarm init` generate a random secret if none
is provided, and print it to the terminal. This secret will be needed to
join workers or managers to the swarm. In addition to improving access
control to the cluster, this setup removes an avenue for
denial-of-service attacks, since the secret is necessary to even create
an entry in the node list.
`docker swarm init --secret ""` will set up a swarm without a secret,
matching the old behavior. `docker swarm update --secret ""` removes the
automatically generated secret after `docker swarm init`.
Closes#23785
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
In #24159, the title field of `docker node ls` has been
changed from NAME to HOSTNAME. However, in the docs the
NAMEs are still used for the output of `docker node ls`.
This fix updates docs so that NAME field is changed to
HOSTNAME for all `docker node ls`.
This fix is related to #24159 and #24090.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The --auto-accept documentation currently says that both worker and
manager nodes are automatically accepted by default. Correct it.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
For consistency with other filters (such as
"is-official"), this renames the desired_state
filter to "desired-state".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This deprecates the shorthand '-h', because we don't mention it as an option,
and it conflicts with the 'docker create -h/--hostname' option, so cannot be
used for all commands consistently.
This also removes the (single-dash) '-help' option. The single-dash variant was
marked "deprecated" in version 1.5.0 (basically, since it was added in
a2b529ead21e6ab9eafcb1b1d2437c725c43a06a), but still kept around to
prevent '-help' being treated as '-h -e -l -p', causing confusing
warnings.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The reason why the issue occurs is because sh parses the first argument after -c as the whole script to execute.
Everything after isn't executed as one might expect.
When working on the 'fix' I found out the same fix is also done in commit 2af7c5cfe24b4c8e931f751979b5e69e20ba77e2, except only for one occurrence.
Signed-off-by: Serhat Gülçiçek <serhat+signoff@equil.nl>
Make `--dispatcher-heartbeat-period` a duration in `docker swarm
update`, allowing to express the value as "5s", "1h", etc.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
fixing links after moving surfacing tutorials
fixing more links for the newly located tutorials
Signed-off-by: Victoria Bialas <victoria.bialas@docker.com>
Signed-off-by: Shoubhik Bose <sbose78@gmail.com>
Added explanation for the example with image's digest ( as per @thaJeztah 's comment
Signed-off-by: Shoubhik Bose <sbose78@gmail.com>
Wrapped to ~80 chars
Signed-off-by: Shoubhik Bose <sbose78@gmail.com>
fixed broken links created from Engine Overview update by adding missing topic to daemon reference page and updating the hrefs in the api pages
Signed-off-by: Victoria Bialas <victoria.bialas@docker.com>
This fixes some Markup and formatting
issues in the network documentation;
- wrap text to 80 chars
- add missing language hints for code examples
- add missing line continuations (\)
- update USAGE output for Cobra
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds support for filtering by network ID, to be
consistent with other filter options.
Note that only *full* matches are returned; this is
consistent with other filters (e.g. volume), that
also return full matches only.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This endpoint has been deprecated since 1.8. Return an error starting
from this API version (1.24) in order to make sure it's not used for the
next API version and so that we can remove it some times later.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix fixed a couple of typos in the docs of `docker attach`:
docs/reference/commandline/attach.md
man/docker-attach.1.md
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This is similar to network scopes where a volume can either be `local`
or `global`. A `global` volume is one that exists across the entire
cluster where as a `local` volume exists on a single engine.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix fixes a couple of typos in docker attach docs:
docs/reference/commandline/attach.md
man/docker-attach.1.md
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address several issues in deprecated.md:
1. For deprecated and removal versions, some include link reference
to the release tag but some does not point to the release tag. This
fix adds the missing links as long as the version is <= 1.12.
2. Technically, 1.12 is not released yet so the link to 1.12 does
not exist yet. However, at the time 1.12 is released this
deprecated.md doc should have been part of the release as well.
There is a circular dependency. This fix adds 1.12 for now.
3. `HostConfig at API container start` has already been removed
by #22570 so this fix changes `Target For Removal In Release: v1.12`
to `Removed In Release: v1.12`.
4. `Docker search 'automated' and 'stars' options` has not been removed
yet so this fix changes `Removed In Release: v1.14` to
`Target For Removal In Release: v1.14`
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in #23055.
Currently `docker search` result caps at 25 and there is
no way to allow getting more results (if exist).
This fix adds the flag `--limit` so that it is possible
to return more results from the `docker search`.
Related documentation has been updated.
Additional tests have been added to cover the changes.
This fix fixes#23055.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in #20083 where
comment is not supported in `.dockerignore`.
This fix updated the processing of `.dockerignore` so that any
lines starting with `#` are ignored, which is similiar to the
behavior of `.gitignore`.
Related documentation has been updated.
Additional tests have been added to cover the changes.
This fix fixes#20083.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This PR adds support for user-defined health-check probes for Docker
containers. It adds a `HEALTHCHECK` instruction to the Dockerfile syntax plus
some corresponding "docker run" options. It can be used with a restart policy
to automatically restart a container if the check fails.
The `HEALTHCHECK` instruction has two forms:
* `HEALTHCHECK [OPTIONS] CMD command` (check container health by running a command inside the container)
* `HEALTHCHECK NONE` (disable any healthcheck inherited from the base image)
The `HEALTHCHECK` instruction tells Docker how to test a container to check that
it is still working. This can detect cases such as a web server that is stuck in
an infinite loop and unable to handle new connections, even though the server
process is still running.
When a container has a healthcheck specified, it has a _health status_ in
addition to its normal status. This status is initially `starting`. Whenever a
health check passes, it becomes `healthy` (whatever state it was previously in).
After a certain number of consecutive failures, it becomes `unhealthy`.
The options that can appear before `CMD` are:
* `--interval=DURATION` (default: `30s`)
* `--timeout=DURATION` (default: `30s`)
* `--retries=N` (default: `1`)
The health check will first run **interval** seconds after the container is
started, and then again **interval** seconds after each previous check completes.
If a single run of the check takes longer than **timeout** seconds then the check
is considered to have failed.
It takes **retries** consecutive failures of the health check for the container
to be considered `unhealthy`.
There can only be one `HEALTHCHECK` instruction in a Dockerfile. If you list
more than one then only the last `HEALTHCHECK` will take effect.
The command after the `CMD` keyword can be either a shell command (e.g. `HEALTHCHECK
CMD /bin/check-running`) or an _exec_ array (as with other Dockerfile commands;
see e.g. `ENTRYPOINT` for details).
The command's exit status indicates the health status of the container.
The possible values are:
- 0: success - the container is healthy and ready for use
- 1: unhealthy - the container is not working correctly
- 2: starting - the container is not ready for use yet, but is working correctly
If the probe returns 2 ("starting") when the container has already moved out of the
"starting" state then it is treated as "unhealthy" instead.
For example, to check every five minutes or so that a web-server is able to
serve the site's main page within three seconds:
HEALTHCHECK --interval=5m --timeout=3s \
CMD curl -f http://localhost/ || exit 1
To help debug failing probes, any output text (UTF-8 encoded) that the command writes
on stdout or stderr will be stored in the health status and can be queried with
`docker inspect`. Such output should be kept short (only the first 4096 bytes
are stored currently).
When the health status of a container changes, a `health_status` event is
generated with the new status. The health status is also displayed in the
`docker ps` output.
Signed-off-by: Thomas Leonard <thomas.leonard@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add reference to https://github.com/vmware/docker-volume-vsphere to Docker's list of plugins.
This is an officially supported plugin from VMware.
Signed-off-by: Ritesh H Shukla <sritesh@vmware.com>
The -f flag on docker tag has been deprecated in docker 1.10 and
is expected to be removed in docker 1.12.
This fix removed the -f flag on docker tag and also updated
deprecated.md.
NOTE: A separate pull request for engine-api has been opened to
cover the related changes.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Since 1.9, the following short variant options have been
deprecated in favor of their long variants:
`docker run -c (--cpu-shares)`
`docker build -c (--cpu-shares)`
`docker create -c (--cpu-shares)`
`docker update -c (--cpu-shares)`
However, `-c` is still widely used and is considered as
a convenient option for swarm (see #16271).
This fix undeprecated the command line short
variant options of `-c` and updated the deprecated.md.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix fixes an error in documentation (dockerd.md). In the
example given by dockerd.md, the option `cluster-store-opts`
is assigned with an array but this option can only be assigned
as a map.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address the issue raised in #21976 and allows
the options of `--add-host` and `--net=host` to work at the same time.
The documentation has been updated and additional tests have been
added to cover this change.
This fix fixes#21976.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in #21976 and allows
the options of `--dns`, `--dns-search`, `--dns-opt` and `--net=host`
to work at the same time.
The documentation has been updated and additional tests have been
added to cover this change.
This fix fixes#21976.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to cover the issue raised in #22463 by adding
filter for events emitted by docker daemon so that user could
utilize filter to receive events of interest.
Documentations have been updated for this fix.
Additional tests have been added to cover the changes in this fix.
This fix fixes#22463.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to cover the issue raised in #22463 by emitting
events for docker daemon so that user could be notified by
scenarios like config reload, etc.
This fix adds the `daemon reload`, and events for docker daemon.
Additional tests have been added to cover the changes in this fix.
This fix fixes#22463.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- Add link to valid image name and tag formats in referenced files
- Per review comments, updated docs to remove reference to `USERNAME` and
`REGISTRYHOST`.
- Per review comment, removed links from man page.
- Per review comment, added and updated examples on `docker tag`
Signed-off-by: Subhajit Ghosh <isubuz.g@gmail.com>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Automatic translation of MLS labels is currently not
supported, so should not be documented as an example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently the default seccomp profile is fixed. This changes it
so that it varies depending on the Linux capabilities selected with
the --cap-add and --cap-drop options. Without this, if a user adds
privileges, eg to allow ptrace with --cap-add sys_ptrace then still
cannot actually use ptrace as it is still blocked by seccomp, so
they will probably disable seccomp or use --privileged. With this
change the syscalls that are needed for the capability are also
allowed by the seccomp profile based on the selected capabilities.
While this patch makes it easier to do things with for example
cap_sys_admin enabled, as it will now allow creating new namespaces
and use of mount, it still allows less than --cap-add cap_sys_admin
--security-opt seccomp:unconfined would have previously. It is not
recommended that users run containers with cap_sys_admin as this does
give full access to the host machine.
It also cleans up some architecture specific system calls to be
only selected when needed.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Replace Note with a new secion, reduce characters in
per line in 80. Add statement suggested by
https://github.com/thaJeztah
Signed-off-by: Lin Lu <doraalin@163.com>
The LXC built-in exec driver has been deprecated in 1.8 and
further removed in 1.10, yet in deprecated.md it still shows:
```
Target For Removal In Release: v1.10
```
This fix changes the above to `Removed In Release:`.
In addition, lxc-conf flag and API fields have already been
removed in 1.10 as well so the related description has also been
updated in this fix.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address issues raised in #20936 and #22443
where `docker pull` or `docker push` fails because of the
concurrent connection failing.
Currently, the number of maximum concurrent connections is
controlled by `maxDownloadConcurrency` and `maxUploadConcurrency`
which are hardcoded to 3 and 5 respectively. Therefore, in
situations where network connections don't support multiple
downloads/uploads, failures may encounter for `docker push`
or `docker pull`.
This fix tries changes `maxDownloadConcurrency` and
`maxUploadConcurrency` to adjustable by passing
`--max-concurrent-uploads` and `--max-concurrent-downloads` to
`docker daemon` command.
The documentation related to docker daemon has been updated.
Additional test case have been added to cover the changes in this fix.
This fix fixes#20936. This fix fixes#22443.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Since 1.9, driver specific log tag options
`syslog-tag`
`gelf-tag`
`fluentd-tag`
have been deprecated in favor of the generic tag
option which is standard across different logging
drivers.
This fix removed the deprecated driver specific
log tag options of `syslog-tag`, `gelf-tag`,
`fluentd-tag` for 1.12 and updated the docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The 'Unix Signals' (https://en.wikipedia.org/wiki/Unix_signal#Handling_signals) wiki explains that:
> 'There are two signals which cannot be intercepted and handled: SIGKILL and SIGSTOP.'
Signed-off-by: kevinmeredith <kevin.m.meredith@gmail.com>
The old command line options have been deprecated in 1.8.0 and
eventually removed in 1.10.0 through PR #17724, though the
deprecated.md still shows `Target For Removal In Release`.
This fix updates the deprecated.md and changes
`Target For Removal In Release` to `Removed In Release`.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Since 1.9, Docker Content Trust Offline key has been renamed to
Root key and the Tagging key has been renamed to Repository key.
The corresponding environment variables
`DOCKER_CONTENT_TRUST_OFFLINE_PASSPHRASE`
`DOCKER_CONTENT_TRUST_TAGGING_PASSPHRASE`
have also been deprecated and renamed to
`DOCKER_CONTENT_TRUST_ROOT_PASSPHRASE`
`DOCKER_CONTENT_TRUST_REPOSITORY_PASSPHRASE`
This fix removed the deprecated ENV passphrase variables for
1.12 and updated the docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The colon separator(`:`) of `--security-opt` flag was deprecated
in 1.11.0. However, the subtitle in deprecated docs is missing
so it is placed under the same subtitle as the deprecated `-e` and
`--email` flags.
This fix adds the missing subtitle in deprecated docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The jsonlog logger currently allows specifying envs and labels that
should be propagated to the log message, however there has been no way
to read that back.
This adds a new API option to enable inserting these attrs back to the
log reader.
With timestamps, this looks like so:
```
92016-04-08T15:28:09.835913720Z foo=bar,hello=world hello
```
The extra attrs are comma separated before the log message but after
timestamps.
Without timestaps it looks like so:
```
foo=bar,hello=world hello
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This generates an ID string for calls to Mount/Unmount, allowing drivers
to differentiate between two callers of `Mount` and `Unmount`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- [x] Update man page description
- [x] Update man page sample output to something more current
Tested with: `TESTFLAGS='-check.f DockerSuite.TestInfoEnsureSucceeds*'
make test-integration-cli`
Signed-off-by: Lucas Chan <lucas-github@lucaschan.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This add a new filter to 'docker network ls'
to allow filtering by driver-name.
Contrary to "ID" and "name" filters, this
filter only supports an *exact* match.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch did following:
1) Make filter check logic same as `docker ps ` filters
Right now docker container logic work as following:
when same filter used like below:
-f name=jack -f name=tom
it would get all containers name is jack or tom(it is or logic)
when different filter used like below:
-f name=jack -f id=7d1
it would get all containers name is jack and id contains 7d1(it is and logic)
It would make sense in many user cases, but it did lack of compliate filter cases,
like "I want to get containers name is jack or id=7d1", it could work around use
(get id=7d1 containers' name and get name=jack containers, and then construct the
final containers, they could be done in user side use shell or rest API)
2) Fix one network filter bug which could include duplicate result
when use -f name= -f id=, it would get duplicate results
3) Make id filter same as container id filter, which means match any string.
not use prefix match.
It is for consistent match logic
Closes: #21417
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
The `Status` field is a `map[string]interface{}` which allows the driver to pass
back low-level details about the underlying volume.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Copy edit the content
Updates to existing material
Adding mbentley's comments
Updating with last minute comments
Update with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
The documentation already says the cache miss happens only at `ARG`
variable usage, not declaration, but there is a very common implicit
usage: `RUN`, which this commit documents even more, improving on #21790.
Also, use `definition` instead of `declaration`: it's the same thing, and
`definition` is already used in this documentation, contrary to
`declaration`.
Also, distinguish between "instructions" and "variables defined by `ARG`
instructions".
Signed-off-by: Thomas Riccardi <riccardi@systran.fr>
This fix tries to fix the discrepancy between `docker stats` and
`docker run` where `docker run` uses RAMInBytes for all memory
related inputs but `docker stats` uses HumanSize for all memory
related outputs.
To be consistent, `docker stats` needs to use BytesSize for all
memory related outputs to conform to RAMInBytes in `docker run`.
This fix addresses this issue. As BytesSize is used, the test
cases needs to be adjusted to match `KiB/MiB/GiB` instead of
`KB/MB/GB`.
The documentation has also been updated.
This fix fixes#21765.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Following the discussion in #21556, adding a short description of the
default user authentication mechanism (without requiring authentication
plugins)
Signed-off-by: Liron Levin <liron@twistlock.com>
Auto-creation of host-directories was marked deprecated in
Docker 1.9, but was decided to be too much of an backward-incompatible
change, so it was decided to keep the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
runc expects a systemd cgroupsPath to be in slice:scopePrefix:containerName
format and the "--systemd-cgroup" option to be set. Update docker accordingly.
Fixes 21475
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
It was suggested to me that documentation for "docker pull" and "docker
push" should reference "docker login", to make clearer how to specify
credentials for a push or pull operation. Add a note to the manual pages
and reference documentation explaining how registry credentials are
managed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This change include filter `name` and `driver`,
and also update related docs to reflect that filters usage.
Closes: #21243
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Now that the namespace sharing code via runc is vendored with the
containerd changes, we can disable the restrictions on container to
container net and IPC namespace sharing when the daemon has user
namespaces enabled.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This allows a user to specify explicitly to enable
automatic copying of data from the container path to the volume path.
This does not change the default behavior of automatically copying, but
does allow a user to disable it at runtime.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The form "Save an images" is not correct.
Either "Save an image" or "Save images" work, but since
the save commands accepts multiple images, I chose the
latter.
Fixed in all places where I could grep "Save an image(s)".
Signed-off-by: Martin Mosegaard Amdisen <martin.amdisen@praqma.com>
This fix updates the Plugin API docs to cover the case of remote
plugins which could be deployed on a host different from the
docker host, through spec or json files.
This fix closes#20188.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The old examples no longer worked due to changes in
the client and Docker Hub.
This updates the "docker pull" documentation and
adds more examples and explanation of the features.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker creates a UTS namespace by default, even with --net=host, so it
is reasonable to let the user set the hostname. Note that --hostname is
forbidden if the user specifies --uts=host.
Closes#12076
Signed-off-by: Jason Heiss <jheiss@aput.net>
Once thin pool gets full, bad things can happen. Especially in case of xfs
it is possible that xfs keeps on retrying IO infinitely (for certain kind
of IO) and container hangs.
One way to mitigate the problem is that once thin pool is about to get full,
start failing some of the docker operations like pulling new images or
creation of new containers. That way user will get warning ahead of time
and can try to rectify it by creating more free space in thin pool. This
can be done either by deleting existing images/containers or by adding more
free space to thin pool.
This patch adds a new option dm.min_free_space to devicemapper graph
driver. Say one specifies dm.min_free_space=10%. This means atleast
10% of data and metadata blocks should be free in pool before new device
creation is allowed, otherwise operation will fail.
By default min_free_space is 10%. User can change it by specifying
dm.min_free_space=X% on command line. A value of 0% will disable the
check.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Following #19995 and #17409 this PR enables skipping userns re-mapping
when creating a container (or when executing a command). Thus, enabling
privileged containers running side by side with userns remapped
containers.
The feature is enabled by specifying ```--userns:host```, which will not
remapped the user if userns are applied. If this flag is not specified,
the existing behavior (which blocks specific privileged operation)
remains.
Signed-off-by: Liron Levin <liron@twistlock.com>
Update unit test and documentation to handle the new case where Username
is set to <token> to indicate an identity token is involved.
Change the "Password" field in communications with the credential helper
to "Secret" to make clear it has a more generic purpose.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Prior to this change, the "docker network inspect" contains only the
endpoints that have active local container. This excludes all the remote
and stale endpoints. By including all the endpoints, it makes debugging
much simpler and also allows the user to cleanup any stale endpoints
using "docker network disconnect -f {network} {endpoint-name}".
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Allows users to submit options similar to the `mount` command when
creating a volume with the `local` volume driver.
For example:
```go
$ docker volume create -d local --opt type=nfs --opt device=myNfsServer:/data --opt o=noatime,nosuid
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Move the note more up, to prevent people from starting
the daemon with --userns-remap before touching the files.
Also clarify that these steps must be done *before* enabling
userns-remap and starting the daemon.
Also fixed some minor Markup formatting issues.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
This change implements communication with an external credentials store,
ala git-credential-helper. The client falls back the plain text store,
what we're currently using, if there is no remote store configured.
It shells out to helper program when a credential store is
configured. Those programs can be implemented with any language as long as they
follow the convention to pass arguments and information.
There is an implementation for the OS X keychain in https://github.com/calavera/docker-credential-helpers.
That package also provides basic structure to create other helpers.
Signed-off-by: David Calavera <david.calavera@gmail.com>
There are five options 'debug' 'labels' 'cluster-store' 'cluster-store-opts'
and 'cluster-advertise' that can be reconfigured, configure any of these
options should not affect other options which may have configured in flags.
But this is not true, for example, I start a daemon with -D to enable the
debugging, and after a while, I want reconfigure the 'label', so I add a file
'/etc/docker/daemon.json' with content '"labels":["test"]' and send SIGHUP to daemon
to reconfigure the daemon, it work, but the debugging of the daemon is also diabled.
I don't think this is a expeted behaviour.
This patch also have some minor refactor of reconfiguration of cluster-advertiser.
Enable user to reconfigure cluster-advertiser without cluster-store in config file
since cluster-store could also be already set in flag, and we only want to reconfigure
the cluster-advertiser.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
- Allow to filter containers by volume with `--filter volume=name` and `filter volume=/dest`.
- Show their names in the list with the custom format `{{ .Mounts }}`.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Add `--restart` flag for `update` command, so we can change restart
policy for a container no matter it's running or stopped.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
- It reverts fa163f5619bb01cabca1c21 plus a small change
in order to allow passing the global scope datastore
to libnetwork after damon boot.
Signed-off-by: Alessandro Boch <aboch@docker.com>
In new content addressable model, image no longer
have virtual size column, it is now 'size'. So we
need to update related docs about them.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Fixing the links
Updating with Seb's comments
Adding weight
Fixing the engine aliases
Updating after Arun pushed
Removing empty file
Signed-off-by: Mary Anthony <mary@docker.com>
This makes it so when calling `docker run --rm`, or `docker rm -v`, only
volumes specified without a name, e.g. `docker run -v /foo` instead of
`docker run -v awesome:/foo` are removed.
Note that all volumes are named, some are named by the user, some get a
generated name. This is specifically about how the volume was specified
on `run`, assuming that if the user specified it with a name they expect
it to persist after the container is cleaned up.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Return an error if any of the keys don't match valid flags.
- Fix an issue ignoring merged values as named values.
- Fix tlsverify configuration key.
- Fix bug in mflag to avoid panics when one of the flag set doesn't have any flag.
Signed-off-by: David Calavera <david.calavera@gmail.com>
It is possible to invoke `docker ps -f status=dead`, but the
documentation for docker-ps does not mention `dead` as a valid option.
This commit fixes that.
Signed-off-by: Kareem Khazem <karkhaz@karkhaz.com>
The description "set `-1` to disable swap" is wrong, `build`,
`create` and `run` already fixed, we need to fix `update` as well.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
The path here should be absolute, else it would
deem it as volume name.
Also link to release page to contain static binary,
the old link not work, because it is just used to
install docker in os distro, it can not be used
as static binary directly.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Sebastiaan van Stijn
Charles Smith
Vincent Demeester
Tibor Vass
Aaron Lehmann
Aanand Prasad
Everett Toews
Yong Tang
Nishant Totla
Harry Zhang
Dong Chen
allencloud
Justin Cormack
Yanqiang Miao
Qiang Huang
Anil Madhavapeddy
Michael Crosby
Mei ChunTao
Arnaud Porterie (icecrime)
Derek McGowan
johnharris85
Dave Henderson
Joao Fernandes
Otto Kekäläinen
Antonio Murdaca
Adolfo Ochagavía
Alan Thompson
Nicola Kabar
Keith Hudgins
Harald Albers
Serhat Gülçiçek
Sven Dowideit
orkaa
Neil Peterson
Shishir Mahajan
Charles Chan
Tonis Tiigi
Victor Vieux
Alessandro Boch
Kenfe-Mickael Laventure
Victoria Bialas
Amit Shukla
Shoubhik Bose
Brian Goff
Kevin Burke
Ahmet Alp Balkan
Andrew Po
Kirill Kolyshkin
Sainath Grandhi
Shijiang Wei
John Howard
Alexander Morozov
Lukasz Zajaczkowski
Thomas Leonard
Ritesh H Shukla
Roland Kammerer
Michael Friis
Darren Shepherd
root
Nahum Shalman
Akihiro Suda
Subhajit Ghosh
Fabrizio Soppelsa
Mrunal Patel
Lin Lu
mansinahar
Jeremy Unruh
Ivan Grcic
Charles Law
Yi EungJun
kevinmeredith
cyli
Yuan Sun
Zhu Guihua
Doug Davis
Lucas Chan
Wen Cheng Ma
Liron Levin
Lorenzo Fontana
Hao Zhang
Kai Qiang Wu(Kennan)
Darren Stahl
Dimitry Andric
Jared Hocutt
Dan Walsh
Mary Anthony
Thomas Riccardi
Hyzhou
Yi EungJun
Lei Jitang
mikelinjie
Tomasz Kopczynski
Máximo Cuadros
Anusha Ragunathan
Phil Estes
Martin Mosegaard Amdisen
David Calavera
Zhang Wei
Jason Heiss
Vivek Goyal
Madhu Venugopal
Jessica Frazelle
Micah Zoltu
Ken Cochrane
Linus Heckemann
Linus Heckemann
Cameron Spear
Aidan Hobson Sayers
Jian Zhang
ozlerhakan
Bastiaan Bakker
Vishnu kannan
Robert Wallis
Sian Lerk Lau
Tianon Gravi
Muthukumar R
Tom X. Tobin
Chun Chen
Mohammad Banikazemi
Vincent Woo
Felix Hupfeld
qg
Prayag Verma
Bryan Boreham
Jasmine Hegman
Anton Polonskiy
Kareem Khazem
Azat Khuyiyakhmetov