Copy edit the content
Updates to existing material
Adding mbentley's comments
Updating with last minute comments
Update with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
The documentation already says the cache miss happens only at `ARG`
variable usage, not declaration, but there is a very common implicit
usage: `RUN`, which this commit documents even more, improving on #21790.
Also, use `definition` instead of `declaration`: it's the same thing, and
`definition` is already used in this documentation, contrary to
`declaration`.
Also, distinguish between "instructions" and "variables defined by `ARG`
instructions".
Signed-off-by: Thomas Riccardi <riccardi@systran.fr>
This fix tries to fix the discrepancy between `docker stats` and
`docker run` where `docker run` uses RAMInBytes for all memory
related inputs but `docker stats` uses HumanSize for all memory
related outputs.
To be consistent, `docker stats` needs to use BytesSize for all
memory related outputs to conform to RAMInBytes in `docker run`.
This fix addresses this issue. As BytesSize is used, the test
cases needs to be adjusted to match `KiB/MiB/GiB` instead of
`KB/MB/GB`.
The documentation has also been updated.
This fix fixes#21765.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Auto-creation of host-directories was marked deprecated in
Docker 1.9, but was decided to be too much of an backward-incompatible
change, so it was decided to keep the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
runc expects a systemd cgroupsPath to be in slice:scopePrefix:containerName
format and the "--systemd-cgroup" option to be set. Update docker accordingly.
Fixes 21475
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
It was suggested to me that documentation for "docker pull" and "docker
push" should reference "docker login", to make clearer how to specify
credentials for a push or pull operation. Add a note to the manual pages
and reference documentation explaining how registry credentials are
managed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This change include filter `name` and `driver`,
and also update related docs to reflect that filters usage.
Closes: #21243
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Now that the namespace sharing code via runc is vendored with the
containerd changes, we can disable the restrictions on container to
container net and IPC namespace sharing when the daemon has user
namespaces enabled.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This allows a user to specify explicitly to enable
automatic copying of data from the container path to the volume path.
This does not change the default behavior of automatically copying, but
does allow a user to disable it at runtime.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The form "Save an images" is not correct.
Either "Save an image" or "Save images" work, but since
the save commands accepts multiple images, I chose the
latter.
Fixed in all places where I could grep "Save an image(s)".
Signed-off-by: Martin Mosegaard Amdisen <martin.amdisen@praqma.com>
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The old examples no longer worked due to changes in
the client and Docker Hub.
This updates the "docker pull" documentation and
adds more examples and explanation of the features.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker creates a UTS namespace by default, even with --net=host, so it
is reasonable to let the user set the hostname. Note that --hostname is
forbidden if the user specifies --uts=host.
Closes#12076
Signed-off-by: Jason Heiss <jheiss@aput.net>
Once thin pool gets full, bad things can happen. Especially in case of xfs
it is possible that xfs keeps on retrying IO infinitely (for certain kind
of IO) and container hangs.
One way to mitigate the problem is that once thin pool is about to get full,
start failing some of the docker operations like pulling new images or
creation of new containers. That way user will get warning ahead of time
and can try to rectify it by creating more free space in thin pool. This
can be done either by deleting existing images/containers or by adding more
free space to thin pool.
This patch adds a new option dm.min_free_space to devicemapper graph
driver. Say one specifies dm.min_free_space=10%. This means atleast
10% of data and metadata blocks should be free in pool before new device
creation is allowed, otherwise operation will fail.
By default min_free_space is 10%. User can change it by specifying
dm.min_free_space=X% on command line. A value of 0% will disable the
check.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Following #19995 and #17409 this PR enables skipping userns re-mapping
when creating a container (or when executing a command). Thus, enabling
privileged containers running side by side with userns remapped
containers.
The feature is enabled by specifying ```--userns:host```, which will not
remapped the user if userns are applied. If this flag is not specified,
the existing behavior (which blocks specific privileged operation)
remains.
Signed-off-by: Liron Levin <liron@twistlock.com>
Update unit test and documentation to handle the new case where Username
is set to <token> to indicate an identity token is involved.
Change the "Password" field in communications with the credential helper
to "Secret" to make clear it has a more generic purpose.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Prior to this change, the "docker network inspect" contains only the
endpoints that have active local container. This excludes all the remote
and stale endpoints. By including all the endpoints, it makes debugging
much simpler and also allows the user to cleanup any stale endpoints
using "docker network disconnect -f {network} {endpoint-name}".
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Allows users to submit options similar to the `mount` command when
creating a volume with the `local` volume driver.
For example:
```go
$ docker volume create -d local --opt type=nfs --opt device=myNfsServer:/data --opt o=noatime,nosuid
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Move the note more up, to prevent people from starting
the daemon with --userns-remap before touching the files.
Also clarify that these steps must be done *before* enabling
userns-remap and starting the daemon.
Also fixed some minor Markup formatting issues.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
This change implements communication with an external credentials store,
ala git-credential-helper. The client falls back the plain text store,
what we're currently using, if there is no remote store configured.
It shells out to helper program when a credential store is
configured. Those programs can be implemented with any language as long as they
follow the convention to pass arguments and information.
There is an implementation for the OS X keychain in https://github.com/calavera/docker-credential-helpers.
That package also provides basic structure to create other helpers.
Signed-off-by: David Calavera <david.calavera@gmail.com>
There are five options 'debug' 'labels' 'cluster-store' 'cluster-store-opts'
and 'cluster-advertise' that can be reconfigured, configure any of these
options should not affect other options which may have configured in flags.
But this is not true, for example, I start a daemon with -D to enable the
debugging, and after a while, I want reconfigure the 'label', so I add a file
'/etc/docker/daemon.json' with content '"labels":["test"]' and send SIGHUP to daemon
to reconfigure the daemon, it work, but the debugging of the daemon is also diabled.
I don't think this is a expeted behaviour.
This patch also have some minor refactor of reconfiguration of cluster-advertiser.
Enable user to reconfigure cluster-advertiser without cluster-store in config file
since cluster-store could also be already set in flag, and we only want to reconfigure
the cluster-advertiser.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
- Allow to filter containers by volume with `--filter volume=name` and `filter volume=/dest`.
- Show their names in the list with the custom format `{{ .Mounts }}`.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Add `--restart` flag for `update` command, so we can change restart
policy for a container no matter it's running or stopped.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
- It reverts fa163f5619bb01cabca1c21 plus a small change
in order to allow passing the global scope datastore
to libnetwork after damon boot.
Signed-off-by: Alessandro Boch <aboch@docker.com>
In new content addressable model, image no longer
have virtual size column, it is now 'size'. So we
need to update related docs about them.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Fixing the links
Updating with Seb's comments
Adding weight
Fixing the engine aliases
Updating after Arun pushed
Removing empty file
Signed-off-by: Mary Anthony <mary@docker.com>
This makes it so when calling `docker run --rm`, or `docker rm -v`, only
volumes specified without a name, e.g. `docker run -v /foo` instead of
`docker run -v awesome:/foo` are removed.
Note that all volumes are named, some are named by the user, some get a
generated name. This is specifically about how the volume was specified
on `run`, assuming that if the user specified it with a name they expect
it to persist after the container is cleaned up.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Return an error if any of the keys don't match valid flags.
- Fix an issue ignoring merged values as named values.
- Fix tlsverify configuration key.
- Fix bug in mflag to avoid panics when one of the flag set doesn't have any flag.
Signed-off-by: David Calavera <david.calavera@gmail.com>
It is possible to invoke `docker ps -f status=dead`, but the
documentation for docker-ps does not mention `dead` as a valid option.
This commit fixes that.
Signed-off-by: Kareem Khazem <karkhaz@karkhaz.com>
The description "set `-1` to disable swap" is wrong, `build`,
`create` and `run` already fixed, we need to fix `update` as well.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
The path here should be absolute, else it would
deem it as volume name.
Also link to release page to contain static binary,
the old link not work, because it is just used to
install docker in os distro, it can not be used
as static binary directly.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
The example is not right in parameter, and also
one command is same as first one, it should be typo
before, we should use 'rw' as example for that.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
* If user doesn't specify the subnets to create a network, it will pick
subnets from inside preferred pool. This PR aims to inspect these subnets info
* Add integration tests for docker inspect the subnets.
* docker-py project is already synchronized.
* jenkins checks depend on https://github.com/docker/docker-py/pull/888
Fixes issue #18626
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Updaing and slight re-arrangement of security information
Signed-off-by: Mary Anthony <mary@docker.com>
Updating security files
Signed-off-by: Mary Anthony <mary@docker.com>
Updating links to the security documentation
Signed-off-by: Mary Anthony <mary@docker.com>
removing some extra spaces
Signed-off-by: Mary Anthony <mary@docker.com>
Correcting spelling
Signed-off-by: Mary Anthony <mary@docker.com>
docker's network disconnect api now supports `Force` option which can be
used to force cleanup an endpoint from any host in the cluster.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Instead of just showing the number of containers this patch will
show the number of running, paused and stopped containers as well.
Signed-off-by: Kim Eik <kim@heldig.org>
(cherry picked from commit a9804ab1cb117a132cbf460067d55f5146d50956)
When pulling an image with content trust enabled, two references are
created: a digest reference and a tag reference. Deleting by tag
wouldn't actually remove the image, because the digest reference keeps
it alive.
This change modifies the rmi logic so that digest references don't keep
an image alive. If the last tag referencing a given image is deleted,
any digest references to it will be removed as well, so the image can
actually get deleted. This fixes the usability problem with deletions
when content trust is in use, so something like "docker pull busybox;
docker rmi busybox" will work as expected.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Remove the experimental docs for user namespaces and add similar content
to the `docker daemon` command documentation.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
the discovery without the key being already there in the store or
created beforehand and implicitely by a 'swarm join'.
Signed-off-by: Alexandre Beslic <abronan@docker.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
This PR allows to configure the discovery path using the
--discovery-opt flag (with "kv.path=path/to/nodes"). We
can point to "docker/nodes" and use the docker discovery.
If docker instances are advertising to the cluster using
the `--cluster-advertise` flag, the swarm join command
becomes unnecessary.
Signed-off-by: Alexandre Beslic <abronan@docker.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
The existing example didn't illustrate how to
install strace in the container. In addition,
the rhel7 image used is no longer public (and maintained)
so not a good image to use in the example.
This updates the example to use htop (strace is
not working without disabling apparmor for the container)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement configurable detach keys (for `attach`, exec`, `run` and
`start`) using the client-side configuration
- Adds a `--detach-keys` flag to `attach`, `exec`, `run` and `start`
commands.
- Adds a new configuration field (in `~/.docker/config.json`) to
configure the default escape keys for docker client.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Add filter support for `network ls` to hide predefined network,
then user can use "docker network rm `docker network ls -f type=custom`"
to delete a bundle of userdefined networks.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Right now, the quiet (-q, --quiet) flag ignores the output
generated from within the container.
However, it ought to be quiet in a way that all kind
of diagnostic output should be ignored, unless the build
process fails.
This patch makes the quiet flag behave in the following way:
1. If the build process succeeds, stdout contains the image ID
and stderr is empty.
2. If the build process fails, stdout is empty and stderr
has the error message and the diagnostic output of that process.
If the quiet flag is not set, then everything goes to stdout
and error messages, if there are any, go to stderr.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
add a note around restart policies only working in detached mode
Signed-off-by: Aidan Feldman <aidan.feldman@gmail.com>
Update restart description with Mary's comments.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Allow passing mount propagation option shared, slave, or private as volume
property.
For example.
docker run -ti -v /root/mnt-source:/root/mnt-dest:slave fedora bash
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Closing the HTTP connection requesting a push or pull will cancel the
push or pull. This behavior also applies to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes markdown formatting, and formatting of tables;
- Our markdown engine doesn't support spanning rows, so
re-wrapped table contents.
- Added a CSS-styles to prevent "code" blocks in tables
from wrapping
- The "logging drivers" table didn't have a header
- Aligned table borders in source code for better readability.
- Standardize on using `-it` in stead of -i -t or -ti
- Some markup issues
- Some minor textual fixups
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Closes#9798
@maintainers please note that this is a change to the UX. We no longer
require the -f flag on `docker tag` to move a tag from an existing image.
However, this does make us more consistent across our commands,
see https://github.com/docker/docker/issues/9798 for the history.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Docker daemon uses kv-store as the host-discovery backend.
Discovery module tracks the liveness of a node through a simple
keepalive mechanism. The keepalive mechanism depends on every
node performing heartbeat by registering itself with the discovery
module (via KV-Store Put operation). And for every Put operation,
the discovery module in all other nodes will receive a Watch
notification. That keeps the node alive.
Any node that fails to register itself within the TTL timer is
considered dead and removed from the discovery database.
The default timer (heartbeat = 20 seconds & ttl = 60 seconds)
works fine for small clusters. But for large clusters, these
default timers are extremely aggressive and that causes high CPU
& most of the processing is spent managing the node discovery
and that impacts normal daemon operation.
Hence we need a way to make the discovery ttl and heartbeat
configurable. As the cluster size grows, the user can change
these timers to make sure the daemon scales.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Plugin drivers were added to docker info in
https://github.com/docker/docker/pull/17300
but not added to the example output in the online
docs.
Also fixed mixed tabs/spaces in the API documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit enhance `docker network rm` command to allow user to delete
multi networks at the same time.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fixes#16555
Original docker `cp` always copy symbol link itself instead of target,
now we provide '-L' option to allow docker to follow symbol link to real
target.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
* This commit will mark --before and --since as deprecated, but leave their behavior
unchanged until they are removed, then re-implement them as options for --filter.
* And update the related docs.
* Update the integration tests.
Fixes issue #17716
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
- Optional "--shm-size=" was added to the sub-command(run, create,and build).
- The size of /dev/shm in the container can be changed
when container is made.
- Being able to specify is a numerical value that applies number,
b, k, m, and g.
- The default value is 64MB, when this option is not set.
- It deals with both native and lxc drivers.
Signed-off-by: NIWA Hideyuki <niwa.hiedyuki@jp.fujitsu.com>
Our implementation of systemd cgroups is mixture of systemd api and
plain filesystem api. It's hard to keep it up to date with systemd and
it already contains some nasty bugs with new versions. Ideally it should
be replaced with some daemon flag which will allow to set parent systemd
slice.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
devmapper uses xfs by default now. So include xfsprogs in build
environment. Also update docs to reflect the new default.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This patch adds the ability to run `docker stats` w/o arguments and get
statistics for all running containers by default. Also add a new
`--all` flag to list statistics for all containers (like `docker ps`).
New running containers are added to the list as they show up also.
Add integration tests for this new behavior.
Docs updated accordingly. Fix missing stuff in man/commandline
reference for `docker stats`.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The purpose of this PR is for users to distinguish Docker errors from
contained command errors.
This PR modifies 'docker run' exit codes to follow the chroot standard
for exit codes.
Exit status:
125 if 'docker run' itself fails
126 if contained command cannot be invoked
127 if contained command cannot be found
the exit status otherwise
Signed-off-by: Sally O'Malley <somalley@redhat.com>
- the /etc/hosts read caveat due to dynamic update
- information about docker_gwbridge
- Carries and closes#17654
- Updating with last change by Madhu
- Updating with the IPAM api 1.22
Signed-off-by: Mary Anthony <mary@docker.com>
Removing old networking.md
Updating dockernetworks.md with images
Adding information on network plugins
Adding blurb about links to docker networking
Updating the working documentation
Adding Overlay Getting Started
Downplaying links by removing refs/examples, adding refs/examples for network.
Updating getting started to reflect networks not links
Pulling out old network material
Updating per discussion with Madhu to add Default docs section
Updating with bridge default
Fix bad merge
Updating with new cluster-advertise behavior
Update working and NetworkSettings examples
Correcting example for default bridge discovery behavior
Entering comments
Fixing broken Markdown Syntax
Updating with comments
Updating all the links
Signed-off-by: Mary Anthony <mary@docker.com>
Added Note to show users that signals will not propagate to the container if the preferred exec form isn't used.
Signed-off-by: Eric Rosenberg <ehaydenr@gmail.com>
Adding Related information blocks
Final first draft pass: ready for review
Review comments
Entering comments from the gang
Updating connect to include paused
Signed-off-by: Mary Anthony <mary@docker.com>
This fixes the indentation of the storage driver
options list.
Also wraps/reformats some examples to prevent
horizontal scrollbars on the rendered HTML
Fixes#17140
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Refactor so that the Host flag validation doesn't destroy the user's input,
and then post process the flags when we know the TLS options
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
GitHub flavored markdown is now supported for links and images. Also, ran LinkChecker and FileResolver. Yay!
Fixes from Spider check
Output for docker/docker now goes into engine directory
Signed-off-by: Mary Anthony <mary@docker.com>
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
cleaning up docker run -v documentation for man and web reference guide
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
This leverages recent additions to libkv enabling client
authentication via TLS so the discovery back-end can be locked
down with mutual TLS. Example usage:
docker daemon [other args] \
--cluster-advertise 192.168.122.168:2376 \
--cluster-store etcd://192.168.122.168:2379 \
--cluster-store-opt kv.cacertfile=/path/to/ca.pem \
--cluster-store-opt kv.certfile=/path/to/cert.pem \
--cluster-store-opt kv.keyfile=/path/to/key.pem
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Provide a command line option dm.use_deferred_deletion to enable deferred
device deletion feature. By default feature will be turned off.
Not sure if there is much value in deferred deletion being turned on
without deferred removal being turned on. So for now, this feature can
be enabled only if deferred removal is on.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
- missing help option in `docs/reference/commandline/*.md` (some files
have it, the other I fixed didn't)
- missing `[OPTIONS]` in Usage description
- missing options
- formatting
- start/stop idempotence
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Use `pkg/discovery` to provide nodes discovery between daemon instances.
The functionality is driven by two different command-line flags: the
experimental `--cluster-store` (previously `--kv-store`) and
`--cluster-advertise`. It can be used in two ways by interested
components:
1. Externally by calling the `/info` API and examining the cluster store
field. The `pkg/discovery` package can then be used to hit the same
endpoint and watch for appearing or disappearing nodes. That is the
method that will for example be used by Swarm.
2. Internally by using the `Daemon.discoveryWatcher` instance. That is
the method that will for example be used by libnetwork.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
* Update format for 'Note:' to match other pages.
* Add link to Go's RFC3339Nano timestamp information.
Signed-off-by: Charles Chan <charleswhchan@users.noreply.github.com>
- The build-time variables are passed as environment-context for command(s)
run as part of the RUN primitve. These variables are not persisted in environment of
intermediate and final images when passed as context for RUN. The build environment
is prepended to the intermediate continer's command string for aiding cache lookups.
It also helps with build traceability. But this also makes the feature less secure from
point of view of passing build time secrets.
- The build-time variables also get used to expand the symbols used in certain
Dockerfile primitves like ADD, COPY, USER etc, without an explicit prior definiton using a
ENV primitive. These variables get persisted in the intermediate and final images
whenever they are expanded.
- The build-time variables are only expanded or passed to the RUN primtive if they
are defined in Dockerfile using the ARG primitive or belong to list of built-in variables.
HTTP_PROXY, HTTPS_PROXY, http_proxy, https_proxy, FTP_PROXY and NO_PROXY are built-in
variables that needn't be explicitly defined in Dockerfile to use this feature.
Signed-off-by: Madhav Puri <madhav.puri@gmail.com>
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
This PR makes a user visible behavior change with userland
proxy disabled by default and rely on hairpin NAT to be enabled
by default. This may not work in older (unsupported) kernels
where the user will be forced to enable userlandproxy if needed.
- Updated the Docs
- Changed the integration-cli to start with userlandproxy
desiabled by default.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Mary Anthony
Thomas Riccardi
Yong Tang
Hyzhou
Kai Qiang Wu(Kennan)
Lei Jitang
mikelinjie
Tomasz Kopczynski
allencloud
Sebastiaan van Stijn
Anusha Ragunathan
Aaron Lehmann
Harald Albers
Shishir Mahajan
Sven Dowideit
Kenfe-Mickael Laventure
Phil Estes
Brian Goff
Martin Mosegaard Amdisen
David Calavera
Dan Walsh
Zhang Wei
Jason Heiss
Vivek Goyal
Liron Levin
Madhu Venugopal
Antonio Murdaca
Jessica Frazelle
Mrunal Patel
Micah Zoltu
Qiang Huang
Ken Cochrane
Aidan Hobson Sayers
Jian Zhang
Alessandro Boch
ozlerhakan
Bastiaan Bakker
Vishnu kannan
Robert Wallis
Victor Vieux
Sian Lerk Lau
Tianon Gravi
Doug Davis
Tom X. Tobin
Chun Chen
Vincent Woo
qg
Prayag Verma
Wen Cheng Ma
Bryan Boreham
Jasmine Hegman
Anton Polonskiy
Kareem Khazem
Azat Khuyiyakhmetov
Ryan Belgrave
Tibor Vass
Kim Eik
Alexander Morozov
Vincent Demeester
Thomas Swift
Ma Shimiao
Boaz Shuster
Aidan Feldman
Justas Brazauskas
Dima Stopel
Sambuddha Basu
Chris Weyl
Ben Firshman
gwx296173
Antonio Murdaca
Mike Brown
NIWA Hideyuki
Olle Jonsson
Zhang Kun
Sally O'Malley
Viktor Stanchev
John Howard
harold cooper
Eric Rosenberg
Denis Gladkikh
Shijiang Wei
Mihuleacc Sergiu
Daniel Hiltgen
Luca Marturana
Yuan Sun
Deng Guangxing
Grant Reaber
Daniel Nephin
Richard Scothern
Arnaud Porterie
Charles Chan
Tim Waugh
qhuang
Hu Keping
Madhav Puri
Tim Hockin
Amen Belayneh
xlgao-zju
Nalin Dahyabhai
Jana Radhakrishnan