Such as with `docker run`, if a user CTRL-Cs while attached to a
container, we should forward the signal and wait for the exit from
`ContainerWait`, instead of just returning.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit 7b46bfc5ac)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
In 3f0d90a2a9 we introduced a global
signal handler and made sure all the contexts passed into command
execution get (appropriately) cancelled when we get a SIGINT.
Due to that change, and how we use this context during `docker attach`,
we started to return the context cancelation error when a user signals
the running `docker attach`.
Since this is the intended behavior, we shouldn't return an error, so
this commit adds checks to ignore this specific error in this case.
Also adds a regression test.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit 66aa0f672c)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Follow up to cc68c66c95 (there were more
tests with incorrect syntax).
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit 4a7388f0dd)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Looks like this test was failing due to bad syntax on the `while` loop,
which caused it to die after 1 second. If the test took a bit longer,
the process would be dead before the following assertions run, causing
the test to fail/be flaky.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit cc68c66c95)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This environment variable allows for setting additional headers
to be sent by the client. Headers set through this environment
variable are added to headers set through the config-file (through
the HttpHeaders field).
This environment variable can be used in situations where headers
must be set for a specific invocation of the CLI, but should not
be set by default, and therefore cannot be set in the config-file.
WARNING: If both config and environment-variable are set, the environment
variable currently overrides all headers set in the configuration file.
This behavior may change in a future update, as we are considering the
environment variable to be appending to existing headers (and to only
override headers with the same name).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 6638deb9d6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes a quick pass through our tests;
Discard output/err
----------------------------------------------
Many tests were testing for error-conditions, but didn't discard output.
This produced a lot of noise when running the tests, and made it hard
to discover if there were actual failures, or if the output was expected.
For example:
=== RUN TestConfigCreateErrors
Error: "create" requires exactly 2 arguments.
See 'create --help'.
Usage: create [OPTIONS] CONFIG file|- [flags]
Create a config from a file or STDIN
Error: "create" requires exactly 2 arguments.
See 'create --help'.
Usage: create [OPTIONS] CONFIG file|- [flags]
Create a config from a file or STDIN
Error: error creating config
--- PASS: TestConfigCreateErrors (0.00s)
And after discarding output:
=== RUN TestConfigCreateErrors
--- PASS: TestConfigCreateErrors (0.00s)
Use sub-tests where possible
----------------------------------------------
Some tests were already set-up to use test-tables, and even had a usable
name (or in some cases "error" to check for). Change them to actual sub-
tests. Same test as above, but now with sub-tests and output discarded:
=== RUN TestConfigCreateErrors
=== RUN TestConfigCreateErrors/requires_exactly_2_arguments
=== RUN TestConfigCreateErrors/requires_exactly_2_arguments#01
=== RUN TestConfigCreateErrors/error_creating_config
--- PASS: TestConfigCreateErrors (0.00s)
--- PASS: TestConfigCreateErrors/requires_exactly_2_arguments (0.00s)
--- PASS: TestConfigCreateErrors/requires_exactly_2_arguments#01 (0.00s)
--- PASS: TestConfigCreateErrors/error_creating_config (0.00s)
PASS
It's not perfect in all cases (in the above, there's duplicate "expected"
errors, but Go conveniently adds "#01" for the duplicate). There's probably
also various tests I missed that could still use the same changes applied;
we can improve these in follow-ups.
Set cmd.Args to prevent test-failures
----------------------------------------------
When running tests from my IDE, it compiles the tests before running,
then executes the compiled binary to run the tests. Cobra doesn't like
that, because in that situation `os.Args` is taken as argument for the
command that's executed. The command that's tested now sees the test-
flags as arguments (`-test.v -test.run ..`), which causes various tests
to fail ("Command XYZ does not accept arguments").
# compile the tests:
go test -c -o foo.test
# execute the test:
./foo.test -test.v -test.run TestFoo
=== RUN TestFoo
Error: "foo" accepts no arguments.
The Cobra maintainers ran into the same situation, and for their own
use have added a special case to ignore `os.Args` in these cases;
https://github.com/spf13/cobra/blob/v1.8.1/command.go#L1078-L1083
args := c.args
// Workaround FAIL with "go test -v" or "cobra.test -test.v", see #155
if c.args == nil && filepath.Base(os.Args[0]) != "cobra.test" {
args = os.Args[1:]
}
Unfortunately, that exception is too specific (only checks for `cobra.test`),
so doesn't automatically fix the issue for other test-binaries. They did
provide a `cmd.SetArgs()` utility for this purpose
https://github.com/spf13/cobra/blob/v1.8.1/command.go#L276-L280
// SetArgs sets arguments for the command. It is set to os.Args[1:] by default, if desired, can be overridden
// particularly useful when testing.
func (c *Command) SetArgs(a []string) {
c.args = a
}
And the fix is to explicitly set the command's args to an empty slice to
prevent Cobra from falling back to using `os.Args[1:]` as arguments.
cmd := newSomeThingCommand()
cmd.SetArgs([]string{})
Some tests already take this issue into account, and I updated some tests
for this, but there's likely many other ones that can use the same treatment.
Perhaps the Cobra maintainers would accept a contribution to make their
condition less specific and to look for binaries ending with a `.test`
suffix (which is what compiled binaries usually are named as).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit ab230240ad)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We'll be using release branches for minor version updates, so instead
of (e.g.) a 27.0 branch, we'll be using 27.x and continue using the
branch for minor version updates.
This patch changes the validation step to only compare against the
major version.
Co-authored-by: Cory Snider <corhere@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 6d8fcbb233)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the version used in the dev-container, and for testing.
release notes: https://github.com/docker/compose/releases/tag/v2.29.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 77c0d83602)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the version used in the dev-container, and for testing.
release notes:
https://github.com/docker/buildx/releases/tag/v0.16.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d00e1abf55)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
No changes in vendored files. This one got out of sync with the other modules
from the same repository.
full diff: d307bd883b...49dd2c1f3d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a77ba7eda8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch:
docker run --volumes-from amazing_nobel
amazing_cannon boring_wozniak determined_banzai
elegant_solomon reverent_booth amazing_nobel
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d6f78cdbb1)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch:
docker run --restart <TAB>
always no on-failure unless-stopped
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 7fe7223c2c)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this, it would panic when a nil-interface was passed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit e4dd8b1898)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
registerCompletionFuncForGlobalFlags was called from newDockerCommand,
at which time no context-store is initialized yet, so it would return
a nil value, probably resulting in `store.Names` to panic, but these
errors are not shown when running the completion. As a result, the flag
completion would fall back to completing from filenames.
This patch changes the function to dynamically get the context-store;
this fixes the problem mentioned above, because at the time the completion
function is _invoked_, the CLI is fully initialized, and does have a
context-store available.
A (non-exported) interface is defined to allow the function to accept
alternative implementations (not requiring a full command.DockerCLI).
Before this patch:
docker context create one
docker context create two
docker --context <TAB>
.DS_Store .idea/ Makefile
.dockerignore .mailmap build/
...
With this patch:
docker context create one
docker context create two
docker --context <TAB>
default one two
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 42b68a3ed7)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"docker run" and "docker create" are mostly identical, so we can copy
the same completion functions,
We could possibly create a utility for this (similar to `addFlags()` which
configures both commands with the flags they share). I considered combining
his with `addFlags()`, but that utility is also used in various tests, in
which we don't need this feature, so keeping that for a future exercise.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 162d9748b9)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's an alias for cobra.FixedCompletions but takes a variadic list
of strings, so that it's not needed to construct an array for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 5e7bcbeac6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
EnvVarNames offers completion for environment-variable names. This
completion can be used for "--env" and "--build-arg" flags, which
allow obtaining the value of the given environment-variable if present
in the local environment, so we only should complete the names of the
environment variables, and not their value. This also prevents the
completion script from printing values of environment variables
containing sensitive values.
For example;
export MY_VAR=hello
docker run --rm --env MY_VAR alpine printenv MY_VAR
hello
Before this patch:
docker run --env GO
GO111MODULE=auto GOLANG_VERSION=1.21.12 GOPATH=/go GOTOOLCHAIN=local
With this patch:
docker run --env GO<tab>
GO111MODULE GOLANG_VERSION GOPATH GOTOOLCHAIN
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit e3427f341b)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is just a convenience function to allow defining completion to
use the default (complete with filenames and directories).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 9207ff1046)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a "completion" target to install the generated completion
scripts inside the dev-container. As generating this script
depends on the docker binary, it calls "make binary" first.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3f3ecb94c5)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's not initialized, because there's no `docker` command installed
by default, but at least this makes sure that the basics are present
for testing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3d80b7b0a7)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Laura Brehm
Sebastiaan van Stijn
Paweł Gronowski
Sebastiaan van Stijn
plaurent