Docker 1.13 and up allows a client to communicate
with older daemons. As a result, flags may be
present that are not supported by the older daemon.
The client already _hides_ flags that are not
supported yet, but this doesn't present users
from using those flags.
This change shows an error if a flag is used
that is not supported by the daemon (either
based on the API version, or because experimental
features are not enabled).
Note that for some options, a check is already
in place in the API client. For those
options, this is just a minor enhancement
to more clearly indicate which _flag_ is
not supported.
Before this change;
DOCKER_API_VERSION=1.24 docker run -d --stop-timeout=30 busybox top
mjfyt3qpvnq0iwmun3sjwth9i
echo -e "FROM busybox\nRUN echo foo > bar" | DOCKER_API_VERSION=1.24 docker build --squash -
"squash" requires API version 1.25, but the Docker server is version 1.24
After this change;
DOCKER_API_VERSION=1.24 docker run -d --stop-timeout=30 busybox top
"--stop-timeout" requires API version 1.25, but the Docker daemon is version 1.24
echo -e "FROM busybox\nRUN echo foo > bar" | DOCKER_API_VERSION=1.24 docker build --squash -
"--squash" requires API version 1.25, but the Docker daemon is version 1.24
echo -e "FROM busybox\nRUN echo foo > bar" | docker build --squash -
"--squash" is only supported on a Docker daemon with experimental features enabled
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker 1.13 moves the `--rm` flag to the daemon,
through an AutoRemove option in HostConfig.
When using API 1.24 and under, AutoRemove should not be
used, even if the daemon is version 1.13 or above and
"supports" this feature.
This patch fixes a situation where an 1.13 client,
talking to an 1.13 daemon, but using the 1.24 API
version, still set the AutoRemove property.
As a result, both the client _and_ the daemon
were attempting to remove the container, resulting
in an error:
ERRO[0000] error removing container: Error response from daemon:
removal of container ce0976ad22495c7cbe9487752ea32721a282164862db036b2f3377bd07461c3a
is already in progress
In addition, the validation of conflicting options
is moved from `docker run` to `opts.parse()`, so
that conflicting options are also detected when
running `docker create` and `docker start` separately.
To resolve the issue, the `AutoRemove` option is now
always set to `false` both by the client and the
daemon, if API version 1.24 or under is used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
At the "Build image from Dockerfile" section in the API docs
the Content-Type header is missing.
In addition, some parts in the code are still setting the
Content-Type header to application/tar while it was changed
to application/x-tar since 16th September 2015.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
This fix is a follow up for comment
https://github.com/docker/docker/pull/28535#issuecomment-263215225
This fix provides `--filter until=<timestamp>` for `docker container/image prune`.
This fix adds `--filter until=<timestamp>` to `docker container/image prune`
so that it is possible to specify a timestamp and prune those containers/images
that are earlier than the timestamp.
Related docs has been updated
Several integration tests have been added to cover changes.
This fix fixes#28497.
This fix is related to #28535.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
In cases where there is high latency (ie, not-local network)
`waitExitOrRemoved` was not receiving events for short-lived containers.
This caused the client to hang while waiting for a notification that the
container has stopped.
This happens because `client.Events()` returns immediately and spins a
goroutine up to process events. The problem here is it returns before
the request to the events endpoint is even made.
Even without high-latency issues, there is no guarantee that the
goroutine is even scheduled by the time the function returns.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This reverts 26103. 26103 was trying to make it so that if someone did:
docker build --build-arg FOO .
and FOO wasn't set as an env var then it would pick-up FOO from the
Dockerfile's ARG cmd. However, it went too far and removed the ability
to specify a build arg w/o any value. Meaning it required the --build-arg
param to always be in the form "name=value", and not just "name".
This PR does the right fix - it allows just "name" and it'll grab the value
from the env vars if set. If "name" isn't set in the env then it still needs
to send "name" to the server so that a warning can be printed about an
unused --build-arg. And this is why buildArgs in the options is now a
*string instead of just a string - 'nil' == mentioned but no value.
Closes#29084
Signed-off-by: Doug Davis <dug@us.ibm.com>
This fix convert DanglingOnly in ImagesPruneConfig to Filters,
so that it is possible to maintain API compatibility in the future.
Several integration tests have been added to cover changes.
This fix is related to 28497.
A follow up to this PR will be done once this PR is merged.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the proposal raised in 28946
to support plugins in `docker inspect`.
The command `docker inspect` already supports
"container", "image", "node", "network", "service", "volume", "task".
However, `--type plugin` is not supported yet at the moment.
This fix address this issue by adding the support of `--type plugin`
for `docker inspect`.
An additional integration test has been added to cover the changes.
This fix fixes 28946.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
If env var "DOCKER_API_VERSION" is specified by user, we'll set
`cli.manualOverride`, before this, this field is always true due to
wrong logic.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Modify the service update and create APIs to return optional warning
messages as part of the response. Populate these messages with an
informative reason when digest resolution fails.
This is a small API change, but significantly improves the UX. The user
can now get immediate feedback when they've specified a nonexistent
image or unreachable registry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
During error cases, we dont cleanup correctly. This commit takes care
of removing the plugin, if there are errors after the pull passed. It
also shuts down the plugin, if there are errors after the plugin in the
enable path.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
Sebastiaan van Stijn
Josh Hawn
Boaz Shuster
Sebastiaan van Stijn
wefine
Yong Tang
Tonis Tiigi
Anusha Ragunathan
Anusha Ragunathan
Vincent Demeester
Brian Goff
WANG Yuexiao
allencloud
Doug Davis
Tibor Vass
unclejack
Victor Vieux
Akihiro Suda
Ben Firshman
Reficul
yupeng
Zhang Wei
Antonio Murdaca
Aaron Lehmann
lixiaobing10051267
John Howard