This only affects the version used in the dev container, but
I noticed it was an older version of buildx.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were creating a stub container, using the current timestamp as
created date. However, if CI was slow to run the test, `Less than a second ago`
would change into `1 second ago`, causing the test to fail:
--- FAIL: TestContainerListNoTrunc (0.00s)
list_test.go:198: assertion failed:
--- expected
+++ actual
@@ -1,4 +1,4 @@
-CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
-container_id busybox:latest "top" Less than a second ago Up 1 second c1
-container_id busybox:latest "top" Less than a second ago Up 1 second c2,foo/bar
+CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+container_id busybox:latest "top" 1 second ago Up 1 second c1
+container_id busybox:latest "top" 1 second ago Up 1 second c2,foo/bar
This patch changes the "created" time of the container to be a minute ago. This
will result in `About a minute ago`, with a margin of 1 minute.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function is deprecated because it has known limitations when using
with multi-byte strings. This limitations are quite "corner case", and
our use (mostly) is for ASCII strings. The suggestion replacement brings
20k+ lines of code, which is a bit too much to fix those corner cases.
templates/templates.go:23:14: SA1019: strings.Title is deprecated: The rule Title uses for word boundaries does not handle Unicode punctuation properly. Use golang.org/x/text/cases instead. (staticcheck)
"title": strings.Title,
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- updated the default value for `--limit` on `docker search` as the const has been
removed (added a todo to remove it)
- updated some fixtures to account for `KernelMemoryTCP` no longer being included
in the output.
full diff: 83b51522df...8941dcfcc5
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also removed deprecated linters:
The linter 'interfacer' is deprecated (since v1.38.0) due to: The repository of the linter has been archived by the owner.
The linter 'golint' is deprecated (since v1.41.0) due to: The repository of the linter has been archived by the owner. Replaced by revive.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/compose/interpolation/interpolation.go:102:4: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
"invalid interpolation format for %s: %#v. You may need to escape any $ with another $.",
^
cli/command/stack/loader/loader.go:30:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return nil, errors.Errorf("Compose file contains unsupported options:\n\n%s\n",
^
cli/command/formatter/formatter.go:76:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return tmpl, errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/formatter/formatter.go:97:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/image/build.go:257:25: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("error checking context: '%s'.", err)
^
cli/command/volume/create.go:35:27: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Conflicting options: either specify --name or provide positional arg, not both\n")
^
cli/command/container/create.go:160:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("failed to remove the CID file '%s': %s \n", cid.path, err)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- remove check for "A self-sufficient runtime for containers"; really
not important to check for.
- don't make the checks positional (just match that we find them, and
that we don't find them multiple times)
- account for leading whitespace to change instead of hard-coding the
number of spaces before output.
- change the badopt check; I think it should be sufficient to check
that the bad option was printed and that "run --help" output is
printed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The COMPANY_NAME currently sets the "CompanyName" field in the metadata
of Windows binaries. Our intent of this field is this field to contain
information about the company/party that produced the binary.
Also from [FileVersionInfo.CompanyName][FileVersionInfo.CompanyName]:
> Gets the name of the company that produced the file
Based on the above, "PACKAGER_NAME" is a bit more generic, and clearer
on intent, and we may at some point re-use this same information to
propagate equivalent fields on other platforms (rpms, debs)
[FileVersionInfo.CompanyName]: https://docs.microsoft.com/en-us/dotnet/api/system.diagnostics.fileversioninfo.companyname
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some warnings about go1.16 compatibility, so including them here:
+ go mod tidy -modfile=vendor.mod
github.com/docker/cli/cli/registry/client imports
github.com/docker/distribution/registry/api/v2 imports
github.com/gorilla/mux loaded from github.com/gorilla/mux@v1.7.0,
but go 1.16 would select v1.8.0
github.com/docker/cli/cli/compose/loader imports
gopkg.in/yaml.v2 tested by
gopkg.in/yaml.v2.test imports
gopkg.in/check.v1 loaded from gopkg.in/check.v1@v1.0.0-20200227125254-8fa46927fb4f,
but go 1.16 would select v1.0.0-20201130134442-10cb98267c6c
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server imports
github.com/theupdateframework/notary/utils imports
github.com/Shopify/logrus-bugsnag loaded from github.com/Shopify/logrus-bugsnag@v0.0.0-20170309145241-6dbc35f2c30d,
but go 1.16 would select v0.0.0-20171204204709-577dee27f20d
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server/storage imports
gopkg.in/rethinkdb/rethinkdb-go.v6 imports
github.com/opentracing/opentracing-go loaded from github.com/opentracing/opentracing-go@v1.1.0,
but go 1.16 would select v1.2.0
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server/storage imports
gopkg.in/rethinkdb/rethinkdb-go.v6 imports
github.com/opentracing/opentracing-go/ext loaded from github.com/opentracing/opentracing-go@v1.1.0,
but go 1.16 would select v1.2.0
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server/storage imports
gopkg.in/rethinkdb/rethinkdb-go.v6 imports
github.com/opentracing/opentracing-go/log loaded from github.com/opentracing/opentracing-go@v1.1.0,
but go 1.16 would select v1.2.0
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server imports
github.com/theupdateframework/notary/utils imports
github.com/spf13/viper imports
github.com/spf13/afero loaded from github.com/spf13/afero@v1.1.2,
but go 1.16 would select v1.2.2
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server imports
github.com/theupdateframework/notary/utils imports
github.com/spf13/viper imports
github.com/spf13/cast loaded from github.com/spf13/cast@v1.3.0,
but go 1.16 would select v1.3.1
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server imports
github.com/theupdateframework/notary/utils imports
github.com/spf13/viper imports
github.com/spf13/jwalterweatherman loaded from github.com/spf13/jwalterweatherman@v1.0.0,
but go 1.16 would select v1.1.0
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server imports
github.com/theupdateframework/notary/utils imports
github.com/spf13/viper imports
gopkg.in/ini.v1 loaded from gopkg.in/ini.v1@v1.51.0,
but go 1.16 would select v1.56.0
github.com/docker/cli/cli/command imports
github.com/theupdateframework/notary/client tested by
github.com/theupdateframework/notary/client.test imports
github.com/theupdateframework/notary/server imports
github.com/theupdateframework/notary/utils imports
github.com/spf13/viper imports
github.com/spf13/afero imports
github.com/spf13/afero/mem loaded from github.com/spf13/afero@v1.1.2,
but go 1.16 would select v1.2.2
To upgrade to the versions selected by go 1.16:
go mod tidy -go=1.16 && go mod tidy -go=1.17
If reproducibility with go 1.16 is not needed:
go mod tidy -compat=1.17
For other options, see:
https://golang.org/doc/modules/pruning
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removes the platform based switch between different versions.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `apt` command is meant to provide a user-friendly interface, but does not
have a stable interface, and not recommended for scripting, see:
#54 [linux/amd64 build-buster 1/1] RUN xx-apt install --no-install-recommends -y libc6-dev libgcc-8-dev
#54 0.706 Hit:1 http://security.debian.org/debian-security buster/updates InRelease
#54 0.707 Hit:2 http://deb.debian.org/debian buster InRelease
#54 0.708 Hit:3 http://deb.debian.org/debian buster-updates InRelease
#54 2.149 Reading package lists...
#54 4.917 + apt install --no-install-recommends -y libc6-dev libgcc-8-dev
#54 4.934
#54 4.934 WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
This changes the command to use `apt-get` instead
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Our previous CI probably did not cross-compile for s390x and ppc64le,
and therefore did not get these errors; the scripts/build/.variables
file sets CGO_ENABLED=1 for amd64|arm64|arm|s390x architectures if
it's not set;
87b8e57868/scripts/build/.variables (L34-L46)
When compiling statically with CGO enabled, we must have osusergo
enabled as well, so set it accordingly, to prevent;
#53 [linux/amd64 build 2/2] RUN --mount=type=bind,target=.,ro --mount=type=cache,target=/root/.cache --mount=from=dockercore/golang-cross:xx-sdk-extras,target=/xx-sdk,src=/xx-sdk --mount=type=tmpfs,target=cli/winresources xx-go --wrap && TARGET=/out ./scripts/build/binary && xx-verify $([ "static" = "static" ] && echo "--static") /out/docker
#53 953.6 # github.com/docker/cli/cmd/docker
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000022.o: in function `New':
#53 953.6 /go/src/github.com/docker/cli/vendor/github.com/miekg/pkcs11/pkcs11.go:75: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000018.o: in function `mygetgrouplist':
#53 953.6 /usr/local/go/src/os/user/getgrouplist_unix.go:18: warning: Using 'getgrouplist' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000017.o: in function `mygetgrgid_r':
#53 953.6 /usr/local/go/src/os/user/cgo_lookup_unix.go:40: warning: Using 'getgrgid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000017.o: in function `mygetgrnam_r':
#53 953.6 /usr/local/go/src/os/user/cgo_lookup_unix.go:45: warning: Using 'getgrnam_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000017.o: in function `mygetpwnam_r':
#53 953.6 /usr/local/go/src/os/user/cgo_lookup_unix.go:35: warning: Using 'getpwnam_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000017.o: in function `mygetpwuid_r':
#53 953.6 /usr/local/go/src/os/user/cgo_lookup_unix.go:30: warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
#53 953.6 /usr/bin/s390x-linux-gnu-ld: /tmp/go-link-2402600021/000004.o: in function `_cgo_3c1cec0c9a4e_C2func_getaddrinfo':
#53 953.6 /tmp/go-build/cgo-gcc-prolog:58: warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: 5770296d90...3147a52a75
This version contains a fix for CVE-2022-27191 (not sure if it affects us).
From the golang mailing list:
Hello gophers,
Version v0.0.0-20220315160706-3147a52a75dd of golang.org/x/crypto/ssh implements
client authentication support for signature algorithms based on SHA-2 for use with
existing RSA keys.
Previously, a client would fail to authenticate with RSA keys to servers that
reject signature algorithms based on SHA-1. This includes OpenSSH 8.8 by default
and—starting today March 15, 2022 for recently uploaded keys.
We are providing this announcement as the error (“ssh: unable to authenticate”)
might otherwise be difficult to troubleshoot.
Version v0.0.0-20220314234659-1baeb1ce4c0b (included in the version above) also
fixes a potential security issue where an attacker could cause a crash in a
golang.org/x/crypto/ssh server under these conditions:
- The server has been configured by passing a Signer to ServerConfig.AddHostKey.
- The Signer passed to AddHostKey does not also implement AlgorithmSigner.
- The Signer passed to AddHostKey does return a key of type “ssh-rsa” from its PublicKey method.
Servers that only use Signer implementations provided by the ssh package are
unaffected. This is CVE-2022-27191.
Alla prossima,
Filippo for the Go Security team
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now that HEREDOC is included in the stable Dockerfile syntax, we can
use the latest stable syntax for all Dockerfiles.
The recommendation for the stable syntax is to use `:1` (which is
equivalent to "latest" stable syntax.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Tonis Tiigi
Nicolas De loof
fezzik1620