Combining `-add` and `-rm` flags on `docker service update` should
be usable to explicitly replace existing options. The current order
of processing did not allow this, causing the `-rm` flag to remove
properties that were specified in `-add`. This behavior was inconsistent
with (for example) `--host-add` and `--host-rm`.
This patch updates the behavior to first remove properties, then
add new properties.
Note that there's still some improvements to make, to make the removal
more granulas (e.g. to make `--label-rm label=some-value` only remove
the label if value matches `some-value`); these changes are left for
a follow-up.
Before this change:
-----------------------------
Create a service with two env-vars
```bash
docker service create --env FOO=bar --env BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"FOO=bar",
"BAR=baz"
]
```
Update the service, with the intent to replace the value of `FOO` for a new value
```bash
docker service update --env-rm FOO --env-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"BAR=baz"
]
```
Create a service with two labels
```bash
docker service create --label FOO=bar --label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, with the intent to replace the value of `FOO` for a new value
```bash
docker service update --label-rm FOO --label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz"
}
```
Create a service with two container labels
```bash
docker service create --container-label FOO=bar --container-label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, with the intent to replace the value of `FOO` for a new value
```bash
docker service update --container-label-rm FOO --container-label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
}
```
With this patch applied:
--------------------------------
Create a service with two env-vars
```bash
docker service create --env FOO=bar --env BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"FOO=bar",
"BAR=baz"
]
```
Update the service, and replace the value of `FOO` for a new value
```bash
docker service update --env-rm FOO --env-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"BAR=baz",
"FOO=updated-foo"
]
```
Create a service with two labels
```bash
docker service create --label FOO=bar --label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, and replace the value of `FOO` for a new value
```bash
docker service update --label-rm FOO --label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "updated-foo"
}
```
Create a service with two container labels
```bash
docker service create --container-label FOO=bar --container-label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, and replace the value of `FOO` for a new value
```bash
docker service update --container-label-rm FOO --container-label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "updated-foo"
}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The docker CLI up until v1.7.0 used the `~/.dockercfg` file to store credentials
after authenticating to a registry (`docker login`). Docker v1.7.0 replaced this
file with a new CLI configuration file, located in `~/.docker/config.json`. When
implementing the new configuration file, the old file (and file-format) was kept
as a fall-back, to assist existing users with migrating to the new file.
Given that the old file format encourages insecure storage of credentials
(credentials are stored unencrypted), and that no version of the CLI since
Docker v1.7.0 has created this file, the file is marked deprecated, and support
for this file will be removed in a future release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When doing `docker service inspect --pretty` on services without
`TaskTemplate.Resources` or `TaskTemplate.Resources.Limits`, the command
fails. This is due to a missing check on ResourceLimitPids().
This bug has been introduced by 395a6d560d
and produces following error message:
```
Template parsing error: template: :139:10: executing "" at <.ResourceLimitPids>: error calling ResourceLimitPids: runtime error: invalid memory address or nil pointer dereference
```
Signed-off-by: Albin Kerouanton <albin@akerouanton.name>
full diff: 26c1120b8d...efbc4488d8
Relevant changes:
- sysx/xattr: fix and improve
- fix getxattrAll: change initial buffer size to 128 to prevent unneeded
iterations and change the logic to get the real size in case we get ERANGE
rather than doubling the buffer)
- improve listxattrAll; refactor for readability, prevent calling `listxattr()`
twice. Handle condition when attributes size is changed in between the two
calls to listxattr().
- Remove Windows' Readlink fork
- Drops support for Go 1.12 and under
- Fix sameFile() to recognize empty files as the same
- fixes "Empty files can diff as "modified" even when they're not"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: c2c7d7b0e1...ae3a8d7530
Relevant changes
- Update dependencies
- update docker/docker to current master
- update opencontainers/runc to v1.0.0-rc10
- update pkg/errors to v0.9.1 to support Go 1.13 errors
- update stretchr/testify to the latest version
- Drop support for go1.12, and use errors.Is() for error-detection
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: aaf470eca7...78e6ffd279
- Add DefaultAddressPools to Info
- Configure shims from runtime config
- pkg/archive: use containerd/sys to detect UserNamespaces
- removes github.com/opencontainers/runc/libcontainer/system dependency
- pkg/archive: Don't use init() to set unpigz path
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This feature does not appear to be generally available yet, so
reverting for now.
This reverts commit 454c1927c0.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Both libaries provide similar functionality. We're currently using
Google Shlex in more places, so prefering that one for now, but we
could decide to switch to mattn/go-shellwords in future if that
library is considered better (it looks to be more actively maintained,
but that may be related to it providing "more features").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In situations where `~/.docker/config.json` was a symlink, saving
the file would replace the symlink with a file, instead of updating
the target file location;
mkdir -p ~/.docker
touch ~/real-config.json
ln -s ~/real-config.json ~/.docker/config.json
ls -la ~/.docker/config.json
# lrwxrwxrwx 1 root root 22 Jun 23 12:34 /root/.docker/config.json -> /root/real-config.json
docker login
# Username: thajeztah
# Password:
# Login Succeeded
ls -la ~/.docker/config.json
-rw-r--r-- 1 root root 229 Jun 23 12:36 /root/.docker/config.json
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Silvin Lubecki
Sebastiaan van Stijn
eyherabh
Tonis Tiigi
Vincent Demeester
Albin Kerouanton
Brian Goff
Akihiro Suda
Wang Yumu
Tibor Vass
Miroslav Gula
Paul Mulders