DockerCLI/vendor/google.golang.org/grpc/service_config.go

374 lines
11 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
*
* Copyright 2017 gRPC authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
package grpc
import (
"encoding/json"
"fmt"
"strconv"
"strings"
"time"
"google.golang.org/grpc/codes"
"google.golang.org/grpc/grpclog"
)
const maxInt = int(^uint(0) >> 1)
// MethodConfig defines the configuration recommended by the service providers for a
// particular method.
//
// Deprecated: Users should not use this struct. Service config should be received
// through name resolver, as specified here
// https://github.com/grpc/grpc/blob/master/doc/service_config.md
type MethodConfig struct {
// WaitForReady indicates whether RPCs sent to this method should wait until
// the connection is ready by default (!failfast). The value specified via the
// gRPC client API will override the value set here.
WaitForReady *bool
// Timeout is the default timeout for RPCs sent to this method. The actual
// deadline used will be the minimum of the value specified here and the value
// set by the application via the gRPC client API. If either one is not set,
// then the other will be used. If neither is set, then the RPC has no deadline.
Timeout *time.Duration
// MaxReqSize is the maximum allowed payload size for an individual request in a
// stream (client->server) in bytes. The size which is measured is the serialized
// payload after per-message compression (but before stream compression) in bytes.
// The actual value used is the minimum of the value specified here and the value set
// by the application via the gRPC client API. If either one is not set, then the other
// will be used. If neither is set, then the built-in default is used.
MaxReqSize *int
// MaxRespSize is the maximum allowed payload size for an individual response in a
// stream (server->client) in bytes.
MaxRespSize *int
// RetryPolicy configures retry options for the method.
retryPolicy *retryPolicy
}
// ServiceConfig is provided by the service provider and contains parameters for how
// clients that connect to the service should behave.
//
// Deprecated: Users should not use this struct. Service config should be received
// through name resolver, as specified here
// https://github.com/grpc/grpc/blob/master/doc/service_config.md
type ServiceConfig struct {
// LB is the load balancer the service providers recommends. The balancer specified
// via grpc.WithBalancer will override this.
LB *string
// Methods contains a map for the methods in this service. If there is an
// exact match for a method (i.e. /service/method) in the map, use the
// corresponding MethodConfig. If there's no exact match, look for the
// default config for the service (/service/) and use the corresponding
// MethodConfig if it exists. Otherwise, the method has no MethodConfig to
// use.
Methods map[string]MethodConfig
// If a retryThrottlingPolicy is provided, gRPC will automatically throttle
// retry attempts and hedged RPCs when the clients ratio of failures to
// successes exceeds a threshold.
//
// For each server name, the gRPC client will maintain a token_count which is
// initially set to maxTokens, and can take values between 0 and maxTokens.
//
// Every outgoing RPC (regardless of service or method invoked) will change
// token_count as follows:
//
// - Every failed RPC will decrement the token_count by 1.
// - Every successful RPC will increment the token_count by tokenRatio.
//
// If token_count is less than or equal to maxTokens / 2, then RPCs will not
// be retried and hedged RPCs will not be sent.
retryThrottling *retryThrottlingPolicy
// healthCheckConfig must be set as one of the requirement to enable LB channel
// health check.
healthCheckConfig *healthCheckConfig
// rawJSONString stores service config json string that get parsed into
// this service config struct.
rawJSONString string
}
// healthCheckConfig defines the go-native version of the LB channel health check config.
type healthCheckConfig struct {
// serviceName is the service name to use in the health-checking request.
ServiceName string
}
// retryPolicy defines the go-native version of the retry policy defined by the
// service config here:
// https://github.com/grpc/proposal/blob/master/A6-client-retries.md#integration-with-service-config
type retryPolicy struct {
// MaxAttempts is the maximum number of attempts, including the original RPC.
//
// This field is required and must be two or greater.
maxAttempts int
// Exponential backoff parameters. The initial retry attempt will occur at
// random(0, initialBackoffMS). In general, the nth attempt will occur at
// random(0,
// min(initialBackoffMS*backoffMultiplier**(n-1), maxBackoffMS)).
//
// These fields are required and must be greater than zero.
initialBackoff time.Duration
maxBackoff time.Duration
backoffMultiplier float64
// The set of status codes which may be retried.
//
// Status codes are specified as strings, e.g., "UNAVAILABLE".
//
// This field is required and must be non-empty.
// Note: a set is used to store this for easy lookup.
retryableStatusCodes map[codes.Code]bool
}
type jsonRetryPolicy struct {
MaxAttempts int
InitialBackoff string
MaxBackoff string
BackoffMultiplier float64
RetryableStatusCodes []codes.Code
}
// retryThrottlingPolicy defines the go-native version of the retry throttling
// policy defined by the service config here:
// https://github.com/grpc/proposal/blob/master/A6-client-retries.md#integration-with-service-config
type retryThrottlingPolicy struct {
// The number of tokens starts at maxTokens. The token_count will always be
// between 0 and maxTokens.
//
// This field is required and must be greater than zero.
MaxTokens float64
// The amount of tokens to add on each successful RPC. Typically this will
// be some number between 0 and 1, e.g., 0.1.
//
// This field is required and must be greater than zero. Up to 3 decimal
// places are supported.
TokenRatio float64
}
func parseDuration(s *string) (*time.Duration, error) {
if s == nil {
return nil, nil
}
if !strings.HasSuffix(*s, "s") {
return nil, fmt.Errorf("malformed duration %q", *s)
}
ss := strings.SplitN((*s)[:len(*s)-1], ".", 3)
if len(ss) > 2 {
return nil, fmt.Errorf("malformed duration %q", *s)
}
// hasDigits is set if either the whole or fractional part of the number is
// present, since both are optional but one is required.
hasDigits := false
var d time.Duration
if len(ss[0]) > 0 {
i, err := strconv.ParseInt(ss[0], 10, 32)
if err != nil {
return nil, fmt.Errorf("malformed duration %q: %v", *s, err)
}
d = time.Duration(i) * time.Second
hasDigits = true
}
if len(ss) == 2 && len(ss[1]) > 0 {
if len(ss[1]) > 9 {
return nil, fmt.Errorf("malformed duration %q", *s)
}
f, err := strconv.ParseInt(ss[1], 10, 64)
if err != nil {
return nil, fmt.Errorf("malformed duration %q: %v", *s, err)
}
for i := 9; i > len(ss[1]); i-- {
f *= 10
}
d += time.Duration(f)
hasDigits = true
}
if !hasDigits {
return nil, fmt.Errorf("malformed duration %q", *s)
}
return &d, nil
}
type jsonName struct {
Service *string
Method *string
}
func (j jsonName) generatePath() (string, bool) {
if j.Service == nil {
return "", false
}
res := "/" + *j.Service + "/"
if j.Method != nil {
res += *j.Method
}
return res, true
}
// TODO(lyuxuan): delete this struct after cleaning up old service config implementation.
type jsonMC struct {
Name *[]jsonName
WaitForReady *bool
Timeout *string
MaxRequestMessageBytes *int64
MaxResponseMessageBytes *int64
RetryPolicy *jsonRetryPolicy
}
// TODO(lyuxuan): delete this struct after cleaning up old service config implementation.
type jsonSC struct {
LoadBalancingPolicy *string
MethodConfig *[]jsonMC
RetryThrottling *retryThrottlingPolicy
HealthCheckConfig *healthCheckConfig
}
func parseServiceConfig(js string) (*ServiceConfig, error) {
var rsc jsonSC
err := json.Unmarshal([]byte(js), &rsc)
if err != nil {
grpclog.Warningf("grpc: parseServiceConfig error unmarshaling %s due to %v", js, err)
return nil, err
}
sc := ServiceConfig{
LB: rsc.LoadBalancingPolicy,
Methods: make(map[string]MethodConfig),
retryThrottling: rsc.RetryThrottling,
healthCheckConfig: rsc.HealthCheckConfig,
rawJSONString: js,
}
if rsc.MethodConfig == nil {
return &sc, nil
}
for _, m := range *rsc.MethodConfig {
if m.Name == nil {
continue
}
d, err := parseDuration(m.Timeout)
if err != nil {
grpclog.Warningf("grpc: parseServiceConfig error unmarshaling %s due to %v", js, err)
return nil, err
}
mc := MethodConfig{
WaitForReady: m.WaitForReady,
Timeout: d,
}
if mc.retryPolicy, err = convertRetryPolicy(m.RetryPolicy); err != nil {
grpclog.Warningf("grpc: parseServiceConfig error unmarshaling %s due to %v", js, err)
return nil, err
}
if m.MaxRequestMessageBytes != nil {
if *m.MaxRequestMessageBytes > int64(maxInt) {
mc.MaxReqSize = newInt(maxInt)
} else {
mc.MaxReqSize = newInt(int(*m.MaxRequestMessageBytes))
}
}
if m.MaxResponseMessageBytes != nil {
if *m.MaxResponseMessageBytes > int64(maxInt) {
mc.MaxRespSize = newInt(maxInt)
} else {
mc.MaxRespSize = newInt(int(*m.MaxResponseMessageBytes))
}
}
for _, n := range *m.Name {
if path, valid := n.generatePath(); valid {
sc.Methods[path] = mc
}
}
}
if sc.retryThrottling != nil {
if sc.retryThrottling.MaxTokens <= 0 ||
sc.retryThrottling.MaxTokens > 1000 ||
sc.retryThrottling.TokenRatio <= 0 {
// Illegal throttling config; disable throttling.
sc.retryThrottling = nil
}
}
return &sc, nil
}
func convertRetryPolicy(jrp *jsonRetryPolicy) (p *retryPolicy, err error) {
if jrp == nil {
return nil, nil
}
ib, err := parseDuration(&jrp.InitialBackoff)
if err != nil {
return nil, err
}
mb, err := parseDuration(&jrp.MaxBackoff)
if err != nil {
return nil, err
}
if jrp.MaxAttempts <= 1 ||
*ib <= 0 ||
*mb <= 0 ||
jrp.BackoffMultiplier <= 0 ||
len(jrp.RetryableStatusCodes) == 0 {
grpclog.Warningf("grpc: ignoring retry policy %v due to illegal configuration", jrp)
return nil, nil
}
rp := &retryPolicy{
maxAttempts: jrp.MaxAttempts,
initialBackoff: *ib,
maxBackoff: *mb,
backoffMultiplier: jrp.BackoffMultiplier,
retryableStatusCodes: make(map[codes.Code]bool),
}
if rp.maxAttempts > 5 {
// TODO(retry): Make the max maxAttempts configurable.
rp.maxAttempts = 5
}
for _, code := range jrp.RetryableStatusCodes {
rp.retryableStatusCodes[code] = true
}
return rp, nil
}
func min(a, b *int) *int {
if *a < *b {
return a
}
return b
}
func getMaxSize(mcMax, doptMax *int, defaultVal int) *int {
if mcMax == nil && doptMax == nil {
return &defaultVal
}
if mcMax != nil && doptMax != nil {
return min(mcMax, doptMax)
}
if mcMax != nil {
return mcMax
}
return doptMax
}
func newInt(b int) *int {
return &b
}