# build
Build an image from a Dockerfile
### Aliases
`docker image build`, `docker build`, `docker buildx build`, `docker builder build`
### Options
| Name | Type | Default | Description |
|:------------------------------------|:--------------|:----------|:------------------------------------------------------------------|
| [`--add-host`](#add-host) | `list` | | Add a custom host-to-IP mapping (`host:ip`) |
| [`--build-arg`](#build-arg) | `list` | | Set build-time variables |
| [`--cache-from`](#cache-from) | `stringSlice` | | Images to consider as cache sources |
| [`--cgroup-parent`](#cgroup-parent) | `string` | | Set the parent cgroup for the `RUN` instructions during build |
| `--compress` | | | Compress the build context using gzip |
| `--cpu-period` | `int64` | `0` | Limit the CPU CFS (Completely Fair Scheduler) period |
| `--cpu-quota` | `int64` | `0` | Limit the CPU CFS (Completely Fair Scheduler) quota |
| `-c`, `--cpu-shares` | `int64` | `0` | CPU shares (relative weight) |
| `--cpuset-cpus` | `string` | | CPUs in which to allow execution (0-3, 0,1) |
| `--cpuset-mems` | `string` | | MEMs in which to allow execution (0-3, 0,1) |
| `--disable-content-trust` | | | Skip image verification |
| [`-f`](#file), [`--file`](#file) | `string` | | Name of the Dockerfile (Default is `PATH/Dockerfile`) |
| `--force-rm` | | | Always remove intermediate containers |
| `--iidfile` | `string` | | Write the image ID to the file |
| [`--isolation`](#isolation) | `string` | | Container isolation technology |
| `--label` | `list` | | Set metadata for an image |
| `-m`, `--memory` | `bytes` | `0` | Memory limit |
| `--memory-swap` | `bytes` | `0` | Swap limit equal to memory plus swap: -1 to enable unlimited swap |
| [`--network`](#network) | `string` | `default` | Set the networking mode for the RUN instructions during build |
| `--no-cache` | | | Do not use cache when building the image |
| `--platform` | `string` | | Set platform if server is multi-platform capable |
| `--pull` | | | Always attempt to pull a newer version of the image |
| `-q`, `--quiet` | | | Suppress the build output and print image ID on success |
| `--rm` | | | Remove intermediate containers after a successful build |
| [`--security-opt`](#security-opt) | `stringSlice` | | Security options |
| `--shm-size` | `bytes` | `0` | Size of `/dev/shm` |
| [`--squash`](#squash) | | | Squash newly built layers into a single new layer |
| [`-t`](#tag), [`--tag`](#tag) | `list` | | Name and optionally a tag in the `name:tag` format |
| [`--target`](#target) | `string` | | Set the target build stage to build. |
| [`--ulimit`](#ulimit) | `ulimit` | | Ulimit options |
## Description
The `docker build` command builds Docker images from a Dockerfile and a
"context". A build's context is the set of files located in the specified
`PATH` or `URL`. The build process can refer to any of the files in the
context. For example, your build can use a [*COPY*](https://docs.docker.com/engine/reference/builder/#copy)
instruction to reference a file in the context.
The `URL` parameter can refer to three kinds of resources: Git repositories,
pre-packaged tarball contexts, and plain text files.
### Git repositories
When the `URL` parameter points to the location of a Git repository, the
repository acts as the build context. The system recursively fetches the
repository and its submodules. The commit history isn't preserved. A
repository is first pulled into a temporary directory on your local host. After
that succeeds, the command sends the directory to the Docker daemon as the context.
Local copy gives you the ability to access private repositories using local
user credentials, VPNs, and so forth.
> **Note**
>
> If the `URL` parameter contains a fragment the system recursively clones
> the repository and its submodules using a `git clone --recursive` command.
Git URLs accept context configuration in their fragment section, separated by a
colon (`:`). The first part represents the reference that Git checks out,
and can be either a branch, a tag, or a remote reference. The second part
represents a subdirectory inside the repository used as a build
context.
For example, run this command to use a directory called `docker` in the branch
`container`:
```console
$ docker build https://github.com/docker/rootfs.git#container:docker
```
The following table represents all the valid suffixes with their build
contexts:
| Build Syntax Suffix | Commit Used | Build Context Used |
|--------------------------------|-----------------------|--------------------|
| `myrepo.git` | `refs/heads/master` | `/` |
| `myrepo.git#mytag` | `refs/tags/mytag` | `/` |
| `myrepo.git#mybranch` | `refs/heads/mybranch` | `/` |
| `myrepo.git#pull/42/head` | `refs/pull/42/head` | `/` |
| `myrepo.git#:myfolder` | `refs/heads/master` | `/myfolder` |
| `myrepo.git#master:myfolder` | `refs/heads/master` | `/myfolder` |
| `myrepo.git#mytag:myfolder` | `refs/tags/mytag` | `/myfolder` |
| `myrepo.git#mybranch:myfolder` | `refs/heads/mybranch` | `/myfolder` |
### Tarball contexts
If you pass a URL to a remote tarball, the command sends the URL itself to the
daemon:
```console
$ docker build http://server/context.tar.gz
```
The host running the Docker daemon performs the download operation,
which isn't necessarily the same host that issued the build command.
The Docker daemon fetches `context.tar.gz` and uses it as the
build context. Tarball contexts must be tar archives conforming to the standard
`tar` Unix format and can be compressed with any one of the `xz`, `bzip2`,
`gzip` or `identity` (no compression) formats.
### Text files
Instead of specifying a context, you can pass a single `Dockerfile` in the
`URL` or pipe the file in via `STDIN`. To pipe a `Dockerfile` from `STDIN`:
```console
$ docker build - < Dockerfile
```
With PowerShell on Windows, you run:
```powershell
Get-Content Dockerfile | docker build -
```
If you use `STDIN` or specify a `URL` pointing to a plain text file, the daemon
places the contents into a `Dockerfile`, and ignores any `-f`, `--file`
option. In this scenario, there is no context.
By default the `docker build` command looks for a `Dockerfile` at the root
of the build context. The `-f`, `--file`, option lets you specify the path to
an alternative file to use instead. This is useful in cases that use the same
set of files for multiple builds. The path must be to a file within the
build context. Relative path are interpreted as relative to the root of the
context.
In most cases, it's best to put each Dockerfile in an empty directory. Then,
add to that directory only the files needed for building the Dockerfile. To
increase the build's performance, you can exclude files and directories by
adding a `.dockerignore` file to that directory as well. For information on
creating one, see the [.dockerignore file](https://docs.docker.com/engine/reference/builder/#dockerignore-file).
If the Docker client loses connection to the daemon, it cancels the build.
This happens if you interrupt the Docker client with `CTRL-c` or if the Docker
client is killed for any reason. If the build initiated a pull which is still
running at the time the build is cancelled, the client also cancels the pull.
## Return code
Successful builds return exit code `0`. When the build fails, the command
returns a non-zero exit code and prints an error message to `STDERR`:
```console
$ docker build -t fail .
Sending build context to Docker daemon 2.048 kB
Sending build context to Docker daemon
Step 1/3 : FROM busybox
---> 4986bf8c1536
Step 2/3 : RUN exit 13
---> Running in e26670ec7a0a
INFO[0000] The command [/bin/sh -c exit 13] returned a non-zero code: 13
$ echo $?
1
```
See also:
[*Dockerfile Reference*](https://docs.docker.com/engine/reference/builder/).
## Examples
### Build with PATH
```console
$ docker build .
Uploading context 10240 bytes
Step 1/3 : FROM busybox
Pulling repository busybox
---> e9aa60c60128MB/2.284 MB (100%) endpoint: https://cdn-registry-1.docker.io/v1/
Step 2/3 : RUN ls -lh /
---> Running in 9c9e81692ae9
total 24
drwxr-xr-x 2 root root 4.0K Mar 12 2013 bin
drwxr-xr-x 5 root root 4.0K Oct 19 00:19 dev
drwxr-xr-x 2 root root 4.0K Oct 19 00:19 etc
drwxr-xr-x 2 root root 4.0K Nov 15 23:34 lib
lrwxrwxrwx 1 root root 3 Mar 12 2013 lib64 -> lib
dr-xr-xr-x 116 root root 0 Nov 15 23:34 proc
lrwxrwxrwx 1 root root 3 Mar 12 2013 sbin -> bin
dr-xr-xr-x 13 root root 0 Nov 15 23:34 sys
drwxr-xr-x 2 root root 4.0K Mar 12 2013 tmp
drwxr-xr-x 2 root root 4.0K Nov 15 23:34 usr
---> b35f4035db3f
Step 3/3 : CMD echo Hello world
---> Running in 02071fceb21b
---> f52f38b7823e
Successfully built f52f38b7823e
Removing intermediate container 9c9e81692ae9
Removing intermediate container 02071fceb21b
```
This example specifies that the `PATH` is `.`, and so `tar`s all the files in the
local directory and sends them to the Docker daemon. The `PATH` specifies
where to find the files for the "context" of the build on the Docker daemon.
Remember that the daemon could be running on a remote machine and that no
parsing of the Dockerfile happens at the client side (where you're running
`docker build`). That means that all the files at `PATH` are sent, not just
the ones listed to [`ADD`](https://docs.docker.com/engine/reference/builder/#add)
in the Dockerfile.
The transfer of context from the local machine to the Docker daemon is what the
`docker` client means when you see the "Sending build context" message.
If you wish to keep the intermediate containers after the build is complete,
you must use `--rm=false`. This doesn't affect the build cache.
### Build with URL
```console
$ docker build github.com/creack/docker-firefox
```
This clones the GitHub repository, using the cloned repository as context,
and the Dockerfile at the root of the repository. You can
specify an arbitrary Git repository by using the `git://` or `git@` scheme.
```console
$ docker build -f ctx/Dockerfile http://server/ctx.tar.gz
Downloading context: http://server/ctx.tar.gz [===================>] 240 B/240 B
Step 1/3 : FROM busybox
---> 8c2e06607696
Step 2/3 : ADD ctx/container.cfg /
---> e7829950cee3
Removing intermediate container b35224abf821
Step 3/3 : CMD /bin/ls
---> Running in fbc63d321d73
---> 3286931702ad
Removing intermediate container fbc63d321d73
Successfully built 377c409b35e4
```
This sends the URL `http://server/ctx.tar.gz` to the Docker daemon, which
downloads and extracts the referenced tarball. The `-f ctx/Dockerfile`
parameter specifies a path inside `ctx.tar.gz` to the `Dockerfile` used
to build the image. Any `ADD` commands in that `Dockerfile` that refer to local
paths must be relative to the root of the contents inside `ctx.tar.gz`. In the
example above, the tarball contains a directory `ctx/`, so the `ADD
ctx/container.cfg /` operation works as expected.
### Build with `-`
```console
$ docker build - < Dockerfile
```
This example reads a Dockerfile from `STDIN` without context. Due to the lack of a
context, the command doesn't send contents of any local directory to the Docker daemon.
Since there is no context, a Dockerfile `ADD` only works if it refers to a
remote URL.
```console
$ docker build - < context.tar.gz
```
This example builds an image for a compressed context read from `STDIN`.
Supported formats are: `bzip2`, `gzip` and `xz`.
### Use a .dockerignore file
```console
$ docker build .
Uploading context 18.829 MB
Uploading context
Step 1/2 : FROM busybox
---> 769b9341d937
Step 2/2 : CMD echo Hello world
---> Using cache
---> 99cc1ad10469
Successfully built 99cc1ad10469
$ echo ".git" > .dockerignore
$ docker build .
Uploading context 6.76 MB
Uploading context
Step 1/2 : FROM busybox
---> 769b9341d937
Step 2/2 : CMD echo Hello world
---> Using cache
---> 99cc1ad10469
Successfully built 99cc1ad10469
```
This example shows the use of the `.dockerignore` file to exclude the `.git`
directory from the context. You can see its effect in the changed size of the
uploaded context. The builder reference contains detailed information on
[creating a .dockerignore file](https://docs.docker.com/engine/reference/builder/#dockerignore-file).
When using the [BuildKit backend](https://docs.docker.com/build/buildkit/),
`docker build` searches for a `.dockerignore` file relative to the Dockerfile
name. For example, running `docker build -f myapp.Dockerfile .` first looks
for an ignore file named `myapp.Dockerfile.dockerignore`. If it can't find such a file,
if present, it uses the `.dockerignore` file. Using a Dockerfile based
`.dockerignore` is useful if a project contains multiple Dockerfiles that expect
to ignore different sets of files.
### Tag an image (-t, --tag)
```console
$ docker build -t vieux/apache:2.0 .
```
This examples builds in the same way as the previous example, but it then tags the resulting
image. The repository name will be `vieux/apache` and the tag `2.0`.
[Read more about valid tags](tag.md).
You can apply multiple tags to an image. For example, you can apply the `latest`
tag to a newly built image and add another tag that references a specific
version.
For example, to tag an image both as `whenry/fedora-jboss:latest` and
`whenry/fedora-jboss:v2.1`, use the following:
```console
$ docker build -t whenry/fedora-jboss:latest -t whenry/fedora-jboss:v2.1 .
```
### Specify a Dockerfile (-f, --file)
```console
$ docker build -f Dockerfile.debug .
```
This uses a file called `Dockerfile.debug` for the build instructions
instead of `Dockerfile`.
```console
$ curl example.com/remote/Dockerfile | docker build -f - .
```
The above command uses the current directory as the build context and reads
a Dockerfile from stdin.
```console
$ docker build -f dockerfiles/Dockerfile.debug -t myapp_debug .
$ docker build -f dockerfiles/Dockerfile.prod -t myapp_prod .
```
The above commands build the current build context (as specified by the
`.`) twice. Once using a debug version of a `Dockerfile` and once using a
production version.
```console
$ cd /home/me/myapp/some/dir/really/deep
$ docker build -f /home/me/myapp/dockerfiles/debug /home/me/myapp
$ docker build -f ../../../../dockerfiles/debug /home/me/myapp
```
These two `docker build` commands do the exact same thing. They both use the
contents of the `debug` file instead of looking for a `Dockerfile` and use
`/home/me/myapp` as the root of the build context. Note that `debug` is in the
directory structure of the build context, regardless of how you refer to it on
the command line.
> **Note**
>
> `docker build` returns a `no such file or directory` error if the
> file or directory doesn't exist in the uploaded context. This may
> happen if there is no context, or if you specify a file that's
> elsewhere on the Host system. The context is limited to the current
> directory (and its children) for security reasons, and to ensure
> repeatable builds on remote Docker hosts. This is also the reason why
> `ADD ../file` doesn't work.
### Use a custom parent cgroup (--cgroup-parent)
When you run `docker build` with the `--cgroup-parent` option, the daemon runs the containers
used in the build with the [corresponding `docker run` flag](../run.md#specify-custom-cgroups).
### Set ulimits in container (--ulimit)
Using the `--ulimit` option with `docker build` causes the daemon to start each build step's
container using those [`--ulimit` flag values](run.md#ulimit).
### Set build-time variables (--build-arg)
You can use `ENV` instructions in a Dockerfile to define variable values. These
values persist in the built image. Often persistence isn't what you want. Users
want to specify variables differently depending on which host they build an
image on.
A good example is `http_proxy` or source versions for pulling intermediate
files. The `ARG` instruction lets Dockerfile authors define values that users
can set at build-time using the `--build-arg` flag:
```console
$ docker build --build-arg HTTP_PROXY=http://10.20.30.2:1234 --build-arg FTP_PROXY=http://40.50.60.5:4567 .
```
This flag allows you to pass the build-time variables that are
accessed like regular environment variables in the `RUN` instruction of the
Dockerfile. These values don't persist in the intermediate or final images
like `ENV` values do. You must add `--build-arg` for each build argument.
Using this flag doesn't alter the output you see when the build process echoes the`ARG` lines from the
Dockerfile.
For detailed information on using `ARG` and `ENV` instructions, see the
[Dockerfile reference](https://docs.docker.com/engine/reference/builder/).
You can also use the `--build-arg` flag without a value, in which case the daemon
propagates the value from the local environment into the Docker container it's building:
```console
$ export HTTP_PROXY=http://10.20.30.2:1234
$ docker build --build-arg HTTP_PROXY .
```
This example is similar to how `docker run -e` works. Refer to the [`docker run` documentation](run.md#env)
for more information.
### Optional security options (--security-opt)
This flag is only supported on a daemon running on Windows, and only supports
the `credentialspec` option. The `credentialspec` must be in the format
`file://spec.txt` or `registry://keyname`.
### Specify isolation technology for container (--isolation)
This option is useful in situations where you are running Docker containers on
Windows. The `--isolation=` option sets a container's isolation
technology. On Linux, the only supported is the `default` option which uses
Linux namespaces. On Microsoft Windows, you can specify these values:
| Value | Description |
|-----------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| `default` | Use the value specified by the Docker daemon's `--exec-opt` . If the `daemon` does not specify an isolation technology, Microsoft Windows uses `process` as its default value. |
| `process` | Namespace isolation only. |
| `hyperv` | Hyper-V hypervisor partition-based isolation. |
Specifying the `--isolation` flag without a value is the same as setting `--isolation="default"`.
### Add entries to container hosts file (--add-host)
You can add other hosts into a build container's `/etc/hosts` file by using one
or more `--add-host` flags. This example adds static addresses for hosts named
`my-hostname` and `my_hostname_v6`:
```console
$ docker build --add-host my_hostname=8.8.8.8 --add-host my_hostname_v6=2001:4860:4860::8888 .
```
If you need your build to connect to services running on the host, you can use
the special `host-gateway` value for `--add-host`. In the following example,
build containers resolve `host.docker.internal` to the host's gateway IP.
```console
$ docker build --add-host host.docker.internal=host-gateway .
```
You can wrap an IPv6 address in square brackets.
`=` and `:` are both valid separators.
Both formats in the following example are valid:
```console
$ docker build --add-host my-hostname:10.180.0.1 --add-host my-hostname_v6=[2001:4860:4860::8888] .
```
### Specifying target build stage (--target)
When building a Dockerfile with multiple build stages, you can use the `--target`
option to specify an intermediate build stage by name as a final stage for the
resulting image. The daemon skips commands after the target stage.
```dockerfile
FROM debian AS build-env
# ...
FROM alpine AS production-env
# ...
```
```console
$ docker build -t mybuildimage --target build-env .
```
### Custom build outputs (--output)
> **Note**
>
> This feature requires the BuildKit backend. You can either
> [enable BuildKit](https://docs.docker.com/build/buildkit/#getting-started) or
> use the [buildx](https://github.com/docker/buildx) plugin which provides more
> output type options.
By default, a local container image is created from the build result. The
`--output` (or `-o`) flag allows you to override this behavior, and specify a
custom exporter. Custom exporters allow you to export the build
artifacts as files on the local filesystem instead of a Docker image, which can
be useful for generating local binaries, code generation etc.
The value for `--output` is a CSV-formatted string defining the exporter type
and options that supports `local` and `tar` exporters.
The `local` exporter writes the resulting build files to a directory on the client side. The
`tar` exporter is similar but writes the files as a single tarball (`.tar`).
If you specify no type, the value defaults to the output directory of the local
exporter. Use a hyphen (`-`) to write the output tarball to standard output
(`STDOUT`).
The following example builds an image using the current directory (`.`) as a build
context, and exports the files to a directory named `out` in the current directory.
If the directory does not exist, Docker creates the directory automatically:
```console
$ docker build -o out .
```
The example above uses the short-hand syntax, omitting the `type` options, and
thus uses the default (`local`) exporter. The example below shows the equivalent
using the long-hand CSV syntax, specifying both `type` and `dest` (destination
path):
```console
$ docker build --output type=local,dest=out .
```
Use the `tar` type to export the files as a `.tar` archive:
```console
$ docker build --output type=tar,dest=out.tar .
```
The example below shows the equivalent when using the short-hand syntax. In this
case, `-` is specified as destination, which automatically selects the `tar` type,
and writes the output tarball to standard output, which is then redirected to
the `out.tar` file:
```console
$ docker build -o - . > out.tar
```
The `--output` option exports all files from the target stage. A common pattern
for exporting only specific files is to do multi-stage builds and to copy the
desired files to a new scratch stage with [`COPY --from`](https://docs.docker.com/engine/reference/builder/#copy).
The example, the `Dockerfile` below uses a separate stage to collect the
build artifacts for exporting:
```dockerfile
FROM golang AS build-stage
RUN go get -u github.com/LK4D4/vndr
FROM scratch AS export-stage
COPY --from=build-stage /go/bin/vndr /
```
When building the Dockerfile with the `-o` option, the command only exports the files from the final
stage to the `out` directory, in this case, the `vndr` binary:
```console
$ docker build -o out .
[+] Building 2.3s (7/7) FINISHED
=> [internal] load build definition from Dockerfile 0.1s
=> => transferring dockerfile: 176B 0.0s
=> [internal] load .dockerignore 0.0s
=> => transferring context: 2B 0.0s
=> [internal] load metadata for docker.io/library/golang:latest 1.6s
=> [build-stage 1/2] FROM docker.io/library/golang@sha256:2df96417dca0561bf1027742dcc5b446a18957cd28eba6aa79269f23f1846d3f 0.0s
=> => resolve docker.io/library/golang@sha256:2df96417dca0561bf1027742dcc5b446a18957cd28eba6aa79269f23f1846d3f 0.0s
=> CACHED [build-stage 2/2] RUN go get -u github.com/LK4D4/vndr 0.0s
=> [export-stage 1/1] COPY --from=build-stage /go/bin/vndr / 0.2s
=> exporting to client 0.4s
=> => copying files 10.30MB 0.3s
$ ls ./out
vndr
```
### Specifying external cache sources (--cache-from)
> **Note**
>
> This feature requires the BuildKit backend. You can either
> [enable BuildKit](https://docs.docker.com/build/buildkit/#getting-started) or
> use the [buildx](https://github.com/docker/buildx) plugin. The previous
> builder has limited support for reusing cache from pre-pulled images.
In addition to local build cache, the builder can reuse the cache generated from
previous builds with the `--cache-from` flag pointing to an image in the registry.
To use an image as a cache source, cache metadata needs to be written into the
image on creation. You can do this by setting `--build-arg BUILDKIT_INLINE_CACHE=1`
when building the image. After that, you can use the built image as a cache source
for subsequent builds.
Upon importing the cache, the builder only pulls the JSON metadata from the
registry and determine possible cache hits based on that information. If there
is a cache hit, the builder pulls the matched layers into the local environment.
In addition to images, the cache can also be pulled from special cache manifests
generated by [`buildx`](https://github.com/docker/buildx) or the BuildKit CLI
(`buildctl`). These manifests (when built with the `type=registry` and `mode=max`
options) allow pulling layer data for intermediate stages in multi-stage builds.
The following example builds an image with inline-cache metadata and pushes it
to a registry, then uses the image as a cache source on another machine:
```console
$ docker build -t myname/myapp --build-arg BUILDKIT_INLINE_CACHE=1 .
$ docker push myname/myapp
```
After pushing the image, the image is used as cache source on another machine.
BuildKit automatically pulls the image from the registry if needed.
On another machine:
```console
$ docker build --cache-from myname/myapp .
```
### Set the networking mode for the RUN instructions during build (--network)
#### Overview
Available options for the networking mode are:
- `default` (default): Run in the default network.
- `none`: Run with no network access.
- `host`: Run in the host’s network environment.
Find more details in the [Dockerfile documentation](https://docs.docker.com/engine/reference/builder/#run---network).
### Squash an image's layers (--squash) (experimental)
#### Overview
> **Note**
> The `--squash` option is an experimental feature, and should not be considered
> stable.
Once the image is built, this flag squashes the new layers into a new image with
a single new layer. Squashing doesn't destroy any existing image, rather it
creates a new image with the content of the squashed layers. This effectively
makes it look like all `Dockerfile` commands were created with a single layer.
The `--squash` flag preserves the build cache.
Squashing layers can be beneficial if your Dockerfile produces multiple layers
modifying the same files. For example, files created in one step and
removed in another step. For other use-cases, squashing images may actually have
a negative impact on performance. When pulling an image consisting of multiple
layers, the daemon can pull layers in parallel and allows sharing layers between
images (saving space).
For most use cases, multi-stage builds are a better alternative, as they give more
fine-grained control over your build, and can take advantage of future
optimizations in the builder. Refer to the [Multi-stage builds](https://docs.docker.com/build/building/multi-stage/)
section for more information.
#### Known limitations
The `--squash` option has a number of known limitations:
- When squashing layers, the resulting image can't take advantage of layer
sharing with other images, and may use significantly more space. Sharing the
base image is still supported.
- When using this option you may see significantly more space used due to
storing two copies of the image, one for the build cache with all the cache
layers intact, and one for the squashed version.
- While squashing layers may produce smaller images, it may have a negative
impact on performance, as a single layer takes longer to extract, and
you can't parallelize downloading a single layer.
- When attempting to squash an image that doesn't make changes to the
filesystem (for example, the Dockerfile only contains `ENV` instructions),
the squash step will fail (see [issue #33823](https://github.com/moby/moby/issues/33823)).
#### Prerequisites
The example on this page is using experimental mode in Docker 23.03.
You can enable experimental mode by using the `--experimental` flag when starting
the Docker daemon or setting `experimental: true` in the `daemon.json` configuration
file.
By default, experimental mode is disabled. To see the current configuration of
the Docker daemon, use the `docker version` command and check the `Experimental`
line in the `Engine` section:
```console
Client: Docker Engine - Community
Version: 23.0.3
API version: 1.42
Go version: go1.19.7
Git commit: 3e7cbfd
Built: Tue Apr 4 22:05:41 2023
OS/Arch: darwin/amd64
Context: default
Server: Docker Engine - Community
Engine:
Version: 23.0.3
API version: 1.42 (minimum version 1.12)
Go version: go1.19.7
Git commit: 59118bf
Built: Tue Apr 4 22:05:41 2023
OS/Arch: linux/amd64
Experimental: true
[...]
```
#### Build an image with the `--squash` flag
The following is an example of a build with the `--squash` flag. Below is the
`Dockerfile`:
```dockerfile
FROM busybox
RUN echo hello > /hello
RUN echo world >> /hello
RUN touch remove_me /remove_me
ENV HELLO=world
RUN rm /remove_me
```
Next, build an image named `test` using the `--squash` flag.
```console
$ docker build --squash -t test .
```
After the build completes, the history looks like the below. The history could show that a layer's
name is ``, and there is a new layer with COMMENT `merge`.
```console
$ docker history test
IMAGE CREATED CREATED BY SIZE COMMENT
4e10cb5b4cac 3 seconds ago 12 B merge sha256:88a7b0112a41826885df0e7072698006ee8f621c6ab99fca7fe9151d7b599702 to sha256:47bcc53f74dc94b1920f0b34f6036096526296767650f223433fe65c35f149eb
5 minutes ago /bin/sh -c rm /remove_me 0 B
5 minutes ago /bin/sh -c #(nop) ENV HELLO=world 0 B
5 minutes ago /bin/sh -c touch remove_me /remove_me 0 B
5 minutes ago /bin/sh -c echo world >> /hello 0 B
6 minutes ago /bin/sh -c echo hello > /hello 0 B
7 weeks ago /bin/sh -c #(nop) CMD ["sh"] 0 B
7 weeks ago /bin/sh -c #(nop) ADD file:47ca6e777c36a4cfff 1.113 MB
```
Test the image, check for `/remove_me` being gone, make sure `hello\nworld` is
in `/hello`, make sure the `HELLO` environment variable's value is `world`.