--- title: "Use the Docker command line" description: "Docker's CLI command description and usage" keywords: "Docker, Docker documentation, CLI, command line" redirect_from: - /engine/reference/commandline/engine/ - /engine/reference/commandline/engine_activate/ - /engine/reference/commandline/engine_check/ - /engine/reference/commandline/engine_update/ --- # docker To list available commands, either run `docker` with no parameters or execute `docker help`: ```bash $ docker Usage: docker [OPTIONS] COMMAND [ARG...] docker [ --help | -v | --version ] A self-sufficient runtime for containers. Options: --config string Location of client config files (default "/root/.docker") -c, --context string Name of the context to use to connect to the daemon (overrides DOCKER_HOST env var and default context set with "docker context use") -D, --debug Enable debug mode --help Print usage -H, --host value Daemon socket(s) to connect to (default []) -l, --log-level string Set the logging level ("debug"|"info"|"warn"|"error"|"fatal") (default "info") --tls Use TLS; implied by --tlsverify --tlscacert string Trust certs signed only by this CA (default "/root/.docker/ca.pem") --tlscert string Path to TLS certificate file (default "/root/.docker/cert.pem") --tlskey string Path to TLS key file (default "/root/.docker/key.pem") --tlsverify Use TLS and verify the remote -v, --version Print version information and quit Commands: attach Attach to a running container # […] ``` ## Description Depending on your Docker system configuration, you may be required to preface each `docker` command with `sudo`. To avoid having to use `sudo` with the `docker` command, your system administrator can create a Unix group called `docker` and add users to it. For more information about installing Docker or `sudo` configuration, refer to the [installation](https://docs.docker.com/install/) instructions for your operating system. ## Environment variables For easy reference, the following list of environment variables are supported by the `docker` command line: * `DOCKER_API_VERSION` The API version to use (e.g. `1.19`) * `DOCKER_CONFIG` The location of your client configuration files. * `DOCKER_CERT_PATH` The location of your authentication keys. * `DOCKER_CLI_EXPERIMENTAL` Enable experimental features for the cli (e.g. `enabled` or `disabled`) * `DOCKER_DRIVER` The graph driver to use. * `DOCKER_HOST` Daemon socket to connect to. * `DOCKER_NOWARN_KERNEL_VERSION` Prevent warnings that your Linux kernel is unsuitable for Docker. * `DOCKER_RAMDISK` If set this will disable 'pivot_root'. * `DOCKER_STACK_ORCHESTRATOR` Configure the default orchestrator to use when using `docker stack` management commands. * `DOCKER_TLS` When set Docker uses TLS. * `DOCKER_TLS_VERIFY` When set Docker uses TLS and verifies the remote. * `DOCKER_CONTENT_TRUST` When set Docker uses notary to sign and verify images. Equates to `--disable-content-trust=false` for build, create, pull, push, run. * `DOCKER_CONTENT_TRUST_SERVER` The URL of the Notary server to use. This defaults to the same URL as the registry. * `DOCKER_HIDE_LEGACY_COMMANDS` When set, Docker hides "legacy" top-level commands (such as `docker rm`, and `docker pull`) in `docker help` output, and only `Management commands` per object-type (e.g., `docker container`) are printed. This may become the default in a future release, at which point this environment-variable is removed. * `DOCKER_TMPDIR` Location for temporary Docker files. * `DOCKER_CONTEXT` Specify the context to use (overrides DOCKER_HOST env var and default context set with "docker context use") * `DOCKER_DEFAULT_PLATFORM` Specify the default platform for the commands that take the `--platform` flag. Because Docker is developed using Go, you can also use any environment variables used by the Go runtime. In particular, you may find these useful: * `HTTP_PROXY` * `HTTPS_PROXY` * `NO_PROXY` These Go environment variables are case-insensitive. See the [Go specification](http://golang.org/pkg/net/http/) for details on these variables. ### Configuration files By default, the Docker command line stores its configuration files in a directory called `.docker` within your `$HOME` directory. Docker manages most of the files in the configuration directory and you should not modify them. However, you *can* modify the `config.json` file to control certain aspects of how the `docker` command behaves. You can modify the `docker` command behavior using environment variables or command-line options. You can also use options within `config.json` to modify some of the same behavior. If an environment variable and the `--config` flag are set, the flag takes precedent over the environment variable. Command line options override environment variables and environment variables override properties you specify in a `config.json` file. ### Change the `.docker` directory To specify a different directory, use the `DOCKER_CONFIG` environment variable or the `--config` command line option. If both are specified, then the `--config` option overrides the `DOCKER_CONFIG` environment variable. The example below overrides the `docker ps` command using a `config.json` file located in the `~/testconfigs/` directory. ```bash $ docker --config ~/testconfigs/ ps ``` This flag only applies to whatever command is being ran. For persistent configuration, you can set the `DOCKER_CONFIG` environment variable in your shell (e.g. `~/.profile` or `~/.bashrc`). The example below sets the new directory to be `HOME/newdir/.docker`. ```bash echo export DOCKER_CONFIG=$HOME/newdir/.docker > ~/.profile ``` ### `config.json` properties The `config.json` file stores a JSON encoding of several properties: The property `HttpHeaders` specifies a set of headers to include in all messages sent from the Docker client to the daemon. Docker does not try to interpret or understand these header; it simply puts them into the messages. Docker does not allow these headers to change any headers it sets for itself. The property `psFormat` specifies the default format for `docker ps` output. When the `--format` flag is not provided with the `docker ps` command, Docker's client uses this property. If this property is not set, the client falls back to the default table format. For a list of supported formatting directives, see the [**Formatting** section in the `docker ps` documentation](ps.md) The property `imagesFormat` specifies the default format for `docker images` output. When the `--format` flag is not provided with the `docker images` command, Docker's client uses this property. If this property is not set, the client falls back to the default table format. For a list of supported formatting directives, see the [**Formatting** section in the `docker images` documentation](images.md) The property `pluginsFormat` specifies the default format for `docker plugin ls` output. When the `--format` flag is not provided with the `docker plugin ls` command, Docker's client uses this property. If this property is not set, the client falls back to the default table format. For a list of supported formatting directives, see the [**Formatting** section in the `docker plugin ls` documentation](plugin_ls.md) The property `servicesFormat` specifies the default format for `docker service ls` output. When the `--format` flag is not provided with the `docker service ls` command, Docker's client uses this property. If this property is not set, the client falls back to the default json format. For a list of supported formatting directives, see the [**Formatting** section in the `docker service ls` documentation](service_ls.md) The property `serviceInspectFormat` specifies the default format for `docker service inspect` output. When the `--format` flag is not provided with the `docker service inspect` command, Docker's client uses this property. If this property is not set, the client falls back to the default json format. For a list of supported formatting directives, see the [**Formatting** section in the `docker service inspect` documentation](service_inspect.md) The property `statsFormat` specifies the default format for `docker stats` output. When the `--format` flag is not provided with the `docker stats` command, Docker's client uses this property. If this property is not set, the client falls back to the default table format. For a list of supported formatting directives, see [**Formatting** section in the `docker stats` documentation](stats.md) The property `secretFormat` specifies the default format for `docker secret ls` output. When the `--format` flag is not provided with the `docker secret ls` command, Docker's client uses this property. If this property is not set, the client falls back to the default table format. For a list of supported formatting directives, see [**Formatting** section in the `docker secret ls` documentation](secret_ls.md) The property `nodesFormat` specifies the default format for `docker node ls` output. When the `--format` flag is not provided with the `docker node ls` command, Docker's client uses the value of `nodesFormat`. If the value of `nodesFormat` is not set, the client uses the default table format. For a list of supported formatting directives, see the [**Formatting** section in the `docker node ls` documentation](node_ls.md) The property `configFormat` specifies the default format for `docker config ls` output. When the `--format` flag is not provided with the `docker config ls` command, Docker's client uses this property. If this property is not set, the client falls back to the default table format. For a list of supported formatting directives, see [**Formatting** section in the `docker config ls` documentation](config_ls.md) The property `credsStore` specifies an external binary to serve as the default credential store. When this property is set, `docker login` will attempt to store credentials in the binary specified by `docker-credential-` which is visible on `$PATH`. If this property is not set, credentials will be stored in the `auths` property of the config. For more information, see the [**Credentials store** section in the `docker login` documentation](login.md#credentials-store) The property `credHelpers` specifies a set of credential helpers to use preferentially over `credsStore` or `auths` when storing and retrieving credentials for specific registries. If this property is set, the binary `docker-credential-` will be used when storing or retrieving credentials for a specific registry. For more information, see the [**Credential helpers** section in the `docker login` documentation](login.md#credential-helpers) The property `stackOrchestrator` specifies the default orchestrator to use when running `docker stack` management commands. Valid values are `"swarm"`, `"kubernetes"`, and `"all"`. This property can be overridden with the `DOCKER_STACK_ORCHESTRATOR` environment variable, or the `--orchestrator` flag. The property `proxies` specifies proxy environment variables to be automatically set on containers, and set as `--build-arg` on containers used during `docker build`. A `"default"` set of proxies can be configured, and will be used for any docker daemon that the client connects to, or a configuration per host (docker daemon), for example, "https://docker-daemon1.example.com". The following properties can be set for each environment: * `httpProxy` (sets the value of `HTTP_PROXY` and `http_proxy`) * `httpsProxy` (sets the value of `HTTPS_PROXY` and `https_proxy`) * `ftpProxy` (sets the value of `FTP_PROXY` and `ftp_proxy`) * `noProxy` (sets the value of `NO_PROXY` and `no_proxy`) > **Warning**: Proxy settings may contain sensitive information (for example, > if the proxy requires authentication). Environment variables are stored as > plain text in the container's configuration, and as such can be inspected > through the remote API or committed to an image when using `docker commit`. Once attached to a container, users detach from it and leave it running using the using `CTRL-p CTRL-q` key sequence. This detach key sequence is customizable using the `detachKeys` property. Specify a `` value for the property. The format of the `` is a comma-separated list of either a letter [a-Z], or the `ctrl-` combined with any of the following: * `a-z` (a single lowercase alpha character ) * `@` (at sign) * `[` (left bracket) * `\\` (two backward slashes) * `_` (underscore) * `^` (caret) Your customization applies to all containers started in with your Docker client. Users can override your custom or the default key sequence on a per-container basis. To do this, the user specifies the `--detach-keys` flag with the `docker attach`, `docker exec`, `docker run` or `docker start` command. The property `plugins` contains settings specific to CLI plugins. The key is the plugin name, while the value is a further map of options, which are specific to that plugin. Following is a sample `config.json` file: ```json {% raw %} { "HttpHeaders": { "MyHeader": "MyValue" }, "psFormat": "table {{.ID}}\\t{{.Image}}\\t{{.Command}}\\t{{.Labels}}", "imagesFormat": "table {{.ID}}\\t{{.Repository}}\\t{{.Tag}}\\t{{.CreatedAt}}", "pluginsFormat": "table {{.ID}}\t{{.Name}}\t{{.Enabled}}", "statsFormat": "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}", "servicesFormat": "table {{.ID}}\t{{.Name}}\t{{.Mode}}", "secretFormat": "table {{.ID}}\t{{.Name}}\t{{.CreatedAt}}\t{{.UpdatedAt}}", "configFormat": "table {{.ID}}\t{{.Name}}\t{{.CreatedAt}}\t{{.UpdatedAt}}", "serviceInspectFormat": "pretty", "nodesFormat": "table {{.ID}}\t{{.Hostname}}\t{{.Availability}}", "detachKeys": "ctrl-e,e", "credsStore": "secretservice", "credHelpers": { "awesomereg.example.org": "hip-star", "unicorn.example.com": "vcbait" }, "stackOrchestrator": "kubernetes", "plugins": { "plugin1": { "option": "value" }, "plugin2": { "anotheroption": "anothervalue", "athirdoption": "athirdvalue" } }, "proxies": { "default": { "httpProxy": "http://user:pass@example.com:3128", "httpsProxy": "http://user:pass@example.com:3128", "noProxy": "http://user:pass@example.com:3128", "ftpProxy": "http://user:pass@example.com:3128" }, "https://manager1.mycorp.example.com:2377": { "httpProxy": "http://user:pass@example.com:3128", "httpsProxy": "http://user:pass@example.com:3128" }, } } {% endraw %} ``` ### Experimental features Experimental features provide early access to future product functionality. These features are intended only for testing and feedback as they may change between releases without warning or can be removed entirely from a future release. > Experimental features must not be used in production environments. {: .warning } To enable experimental features, edit the `config.json` file and set `experimental` to `enabled`. The example below enables experimental features in a `config.json` file that already enables a debug feature. ```json { "experimental": "enabled", "debug": true } ``` You can also enable experimental features from the Docker Desktop menu. See the [Docker Desktop Getting Started page](https://docs.docker.com/docker-for-mac#experimental-features) for more information. ### Notary If using your own notary server and a self-signed certificate or an internal Certificate Authority, you need to place the certificate at `tls//ca.crt` in your docker config directory. Alternatively you can trust the certificate globally by adding it to your system's list of root Certificate Authorities. ## Examples ### Display help text To list the help on any command just execute the command, followed by the `--help` option. $ docker run --help Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...] Run a command in a new container Options: --add-host value Add a custom host-to-IP mapping (host:ip) (default []) -a, --attach value Attach to STDIN, STDOUT or STDERR (default []) ... ### Option types Single character command line options can be combined, so rather than typing `docker run -i -t --name test busybox sh`, you can write `docker run -it --name test busybox sh`. #### Boolean Boolean options take the form `-d=false`. The value you see in the help text is the default value which is set if you do **not** specify that flag. If you specify a Boolean flag without a value, this will set the flag to `true`, irrespective of the default value. For example, running `docker run -d` will set the value to `true`, so your container **will** run in "detached" mode, in the background. Options which default to `true` (e.g., `docker build --rm=true`) can only be set to the non-default value by explicitly setting them to `false`: ```bash $ docker build --rm=false . ``` #### Multi You can specify options like `-a=[]` multiple times in a single command line, for example in these commands: ```bash $ docker run -a stdin -a stdout -i -t ubuntu /bin/bash $ docker run -a stdin -a stdout -a stderr ubuntu /bin/ls ``` Sometimes, multiple options can call for a more complex value string as for `-v`: ```bash $ docker run -v /host:/container example/mysql ``` > **Note**: Do not use the `-t` and `-a stderr` options together due to > limitations in the `pty` implementation. All `stderr` in `pty` mode > simply goes to `stdout`. #### Strings and Integers Options like `--name=""` expect a string, and they can only be specified once. Options like `-c=0` expect an integer, and they can only be specified once.