The currently used idiom for handling key specific subcompletions
did not work here: behind `docker event -f type=network `, the completion
of networks triggered. The expected behaviour is not to complete
anything here.
In order to limit the scope of the corresponding PR, the new idiom is
currently only used in `docker events --filter`.
Signed-off-by: Harald Albers <github@albersweb.de>
The new names make it easier to distinguish between helper functions and
functions that actually perform completion by modifying the global COMPOPT
variable.
Signed-off-by: Harald Albers <github@albersweb.de>
Right now, the quiet (-q, --quiet) flag ignores the output
generated from within the container.
However, it ought to be quiet in a way that all kind
of diagnostic output should be ignored, unless the build
process fails.
This patch makes the quiet flag behave in the following way:
1. If the build process succeeds, stdout contains the image ID
and stderr is empty.
2. If the build process fails, stdout is empty and stderr
has the error message and the diagnostic output of that process.
If the quiet flag is not set, then everything goes to stdout
and error messages, if there are any, go to stderr.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Otherwise, the cache would be invalid and won't be refreshed soon. This
can happen when the user has the completion installed before docker is
installed.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
LXC support has been deprecated and the related completion has been
removed in #17700 but was added back in #17334.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Add support of `tag`, `env` and `labels` for Splunk logging driver.
Removed from message `containerId` as it is the same as `tag`.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This enables Zsh to understand commands like "docker run -it
ubuntu". However, by enabling this, this also makes Zsh completes
"docker run -u<tab>" with "docker run -uapprox" which is not valid. The
users have to put the space or the equal sign themselves before trying
to complete.
Therefore, this behavior is disabled by default. To enable it:
zstyle ':completion:*:*:docker:*' option-stacking yes
zstyle ':completion:*:*:docker-*:*' option-stacking yes
Signed-off-by: Vincent Bernat <vincent@bernat.im>
This is allowed by Docker and helps the completion to not get confused
when a user uses this notation. This will also help to enable stacking
of short options since Zsh needs that to not stack options with
arguments.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
`docker network` is the second command with subcommands.
This refactoring pulls out parsing and processing of subcommands
from `docker volume` completion and thus makes its logic available
for other commands.
Also enables `__docker_pos_first_nonflag` for subcommand completion.
Signed-off-by: Harald Albers <github@albersweb.de>
- missing help option in `docs/reference/commandline/*.md` (some files
have it, the other I fixed didn't)
- missing `[OPTIONS]` in Usage description
- missing options
- formatting
- start/stop idempotence
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
The shell builtin `compopt` is not available on the outdated bash
version 3.2.57 that ships with Mac OS.
It is used in Docker's bash completion to suppress trailing spaces
in advanced completions of hash map options, e.g. `--log-opt`.
If `compopt` is not available, the new behavior is to do nothing,
i.e. the user will have to delete the additional space.
Signed-off-by: Harald Albers <github@albersweb.de>
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Allow the user to configure how Docker's bash completion works for the
"events", "history", "inspect", "run", "rmi" and "save" commands through the
following environment variables:
DOCKER_COMPLETION_SHOW_IMAGE_IDS
"none" - Show names only (default)
"non-intermediate" - Show names and ids, but omit intermediate image IDs
"all" - Show names and ids, including intermediate image IDs
DOCKER_COMPLETION_SHOW_TAGS
"yes" - include tags in completion options (default)
"no" - don't include tags in completion options
Fixes#9474.
Signed-off-by: Rory Hunter <roryhunter2@gmail.com>
This option was incorrectly ported to the new `daemon` subcommand
structure.
Beside the obvious effect that completion of `docker daemon --log-opt`
did not work, this also caused completion of `docker` and `docker xxx`
to fail on macs with
> bash: words: bad array subscript
Signed-off-by: Harald Albers <github@albersweb.de>
This reverts commit 40b71adee390e9c06471b89ed845132b4ec80177.
Original commit (for which this is effectively a rebased version) is
72a500e9e5929b038816d8bd18d462a19e571c99 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
All docker subcommands support `-h` as an alias for `--help`
unless they have `-h` aliased to something else like `docker run`,
which uses `-h` for `--hostname`.
`-h` is not included in the help messages of the commands, though.
It ist visible in
* reference: only in `docker daemon` reference,
see output of `grep -Rse --help=false docs`
* man pages: only in `docker` man page
see output of `grep -RF '**-h**' man`
For consistency reasons, this commit removes `-h` as an alias for
`--help` from the reference page, man page and the bash completion.
Signed-off-by: Harald Albers <github@albersweb.de>
The custom configuration will also be used in docker invocations made
by the completion script itself, just like `-H`.
Signed-off-by: Harald Albers <github@albersweb.de>
It's a bit confusing: the "global options" are valid as "global options"
for all client commands (i.e. all but daemon).
Example: `docker --log-level info run`
For `docker daemon`, these "global options" are only valid as "command
options".
Example: `docker daemon --log-level info`
As command completion cannot tell which command the user is going to
type next, completion for the daemon command has to allow illegal
syntaxes like
`docker --log-level info daemon --log-level info`
Signed-off-by: Harald Albers <github@albersweb.de>
A bash completion file shouldn't have a executable bit set.
Just change file mode to 644 (instead of 755).
Signed-off-by: Dieter Reuter <dieter.reuter@me.com>
Without this fix, `docker --log-opt ` would not complete anything
because the completions were driver specific.
Signed-off-by: Harald Albers <github@albersweb.de>
Without this fix, `docker --log-driver fluentd --log-opt fluentd-tag=b`
would complete `b` to `build`.
Completion of the commands has to be nailed to __docker_pos_first_nonflag
Signed-off-by: Harald Albers <github@albersweb.de>
This solves several problems that arise from the special treatment of
"=" in Bash.
The fix was required as some log drivers have options in a key=value
form. It also addresses the --option=value and the negated boolean syntax
(--boolean=false).
Note that this is not a general fix for these problems, it is limited to
the __docker_pos_first_nonflag function.
Signed-off-by: Harald Albers <github@albersweb.de>
- Add fluentd logging driver to zsh completion #12876
- Add inspect --type flag to zsh completion #13187
- Respect -H option in zsh completion #13195
- Fix number of argument limit for pause and unpause in zsh completion
Signed-off-by: Steve Durrheimer <s.durrheimer@gmail.com>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
With this, `docker pull deb<tab>` will show all `debian:*` tags, as before, but `docker pull -a deb<tab>` will complete directly to just `debian`. 👍
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
The validation script from #10681 is too pedantic, and does not handle
well situations like:
```
cat <<EOF # or <<-EOF
Whether the leading whitespace is stripped out or not by bash
it should still be considered as valid.
EOF
```
This reverts commit 4e65c1c319afffc325853b88c9aef0c42ec83482.
Signed-off-by: Tibor Vass <tibor@docker.com>
Created a validation that detects all trailing whitespaces from every
text file that isn't *.go, *.md, vendor/*,
docs/theme/mkdocs/tipuesearch*
Removed trailing whitespaces from every text file except from vendor/*
builder/parser/testfiles*, docs/theme/mkdocs/tipuesearch* and *.md
Signed-off-by: André Martins <martins@noironetworks.com>
The previous state assumed that the HOSTPATH argument referred to a
file. As clarified by moxiegirl in PR #11305, it is a directory.
Adjusted completion to reflect this.
Signed-off-by: Harald Albers <github@albersweb.de>
zsh completion is updated with the content of
felixr/docker-zsh-completion.
ef4a3fce0437 Update completion for `wait' as per 1.5.0
ace5aa9c1282 Add completion for `stats'
91f112834865 Update completion for `search' as per 1.5.0
a5e4febe4bf6 Update completion for `save' as per 1.5.0
1cdbdb18a384 Add completion for `rename'
2f004bb724b9 Update completion for `pull' as per 1.5.0
773b88e0885b Update completion for `logs' as per 1.5.0
c57e5d5c4551 Update completion for `load' to favor archive files
9af7d12b487e Update completion for `images` as per 1.5.0
0d59e66aff30 update completion for `exec' to complete on commands
46b6c66760d7 Update completion for `events' as per 1.5.0
307e0bdc4c34 Update completion for `commit' as per 1.5.0
c4b331f38cc4 Update completion for `build' as per 1.5.0
Also added myself in the `MAINTAINERS` file.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
In order to fit printed messages to fit 80 chars,
rewording messages for `-H` and `--tls` flags.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Implementing the deamon flags the traditional way introduced even more
redundancy than usual because the same list of options with flags
had to be added twice.
This can be avoided by using variables in the case statements when
using the extglob shell option.
Signed-off-by: Harald Albers <github@albersweb.de>
as noted in https://github.com/boot2docker/boot2docker/issues/690
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
This introduces a sort order for options:
Arrange options sorted alphabetically by long name with the short
options immediately following their corresponding long form.
Signed-off-by: Harald Albers <github@albersweb.de>
_docker_run and _docker_create had only one differing line.
This refactoring features:
- direct completion for both commands to the same function
- factor out the common arguments, sort & format them nicely
- compute the argument for _docker_pos_first_nonflag.
Signed-off-by: Harald Albers <github@albersweb.de>
Current description is misleading. It make an impression the --icc=false
prevents containers to talk with each other.
Signed-off-by: Michal Minar <miminar@redhat.com>
Docker-DCO-1.1-Signed-off-by: Michal Minar <miminar@redhat.com> (github: SvenDowideit)
The -n and --networking options were removed because they are
unsupported.
Bash completion should not reveal the existence of otherwise
undocumented unsupported options.
Signed-off-by: Harald Albers <github@albersweb.de>
A lot of flags have been added on the output of `docker help`. Use a
more robust method to extract the list of available subcommands by
spotting the `Command:` line and the next blank line.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Harald Albers
Steve Durrheimer
Tibor Vass
Ma Shimiao
Vincent Demeester
Boaz Shuster
Jessica Frazelle
Wen Cheng Ma
Antonio Murdaca
Dan Walsh
Vincent Bernat
Denis Gladkikh
Guilhem Lettron
David Calavera
Madhu Venugopal
Zhang Kun
Viktor Stanchev
qhuang
Lei Jitang
Sally O'Malley
Tim Hockin
Samuel Karp
Qiang Huang
Rory Hunter
Tim Dettrick
Dieter Reuter
Mrunal Patel
Shishir Mahajan
Jessica Frazelle
Ahmet Alp Balkan
Brian Goff
Tianon Gravi
Jessica Frazelle
Vincent Batts
André Martins
Mabin
Arnaud Porterie
Mike Dillon
Coenraad Loubser
Sven Dowideit
Sven Dowideit
Barnaby Gray
Michal Minar