The existing example didn't illustrate how to
install strace in the container. In addition,
the rhel7 image used is no longer public (and maintained)
so not a good image to use in the example.
This updates the example to use htop (strace is
not working without disabling apparmor for the container)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
add a note around restart policies only working in detached mode
Signed-off-by: Aidan Feldman <aidan.feldman@gmail.com>
Update restart description with Mary's comments.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Allow passing mount propagation option shared, slave, or private as volume
property.
For example.
docker run -ti -v /root/mnt-source:/root/mnt-dest:slave fedora bash
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This fixes markdown formatting, and formatting of tables;
- Our markdown engine doesn't support spanning rows, so
re-wrapped table contents.
- Added a CSS-styles to prevent "code" blocks in tables
from wrapping
- The "logging drivers" table didn't have a header
- Aligned table borders in source code for better readability.
- Standardize on using `-it` in stead of -i -t or -ti
- Some markup issues
- Some minor textual fixups
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
- Optional "--shm-size=" was added to the sub-command(run, create,and build).
- The size of /dev/shm in the container can be changed
when container is made.
- Being able to specify is a numerical value that applies number,
b, k, m, and g.
- The default value is 64MB, when this option is not set.
- It deals with both native and lxc drivers.
Signed-off-by: NIWA Hideyuki <niwa.hiedyuki@jp.fujitsu.com>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The purpose of this PR is for users to distinguish Docker errors from
contained command errors.
This PR modifies 'docker run' exit codes to follow the chroot standard
for exit codes.
Exit status:
125 if 'docker run' itself fails
126 if contained command cannot be invoked
127 if contained command cannot be found
the exit status otherwise
Signed-off-by: Sally O'Malley <somalley@redhat.com>
- the /etc/hosts read caveat due to dynamic update
- information about docker_gwbridge
- Carries and closes#17654
- Updating with last change by Madhu
- Updating with the IPAM api 1.22
Signed-off-by: Mary Anthony <mary@docker.com>
Removing old networking.md
Updating dockernetworks.md with images
Adding information on network plugins
Adding blurb about links to docker networking
Updating the working documentation
Adding Overlay Getting Started
Downplaying links by removing refs/examples, adding refs/examples for network.
Updating getting started to reflect networks not links
Pulling out old network material
Updating per discussion with Madhu to add Default docs section
Updating with bridge default
Fix bad merge
Updating with new cluster-advertise behavior
Update working and NetworkSettings examples
Correcting example for default bridge discovery behavior
Entering comments
Fixing broken Markdown Syntax
Updating with comments
Updating all the links
Signed-off-by: Mary Anthony <mary@docker.com>
GitHub flavored markdown is now supported for links and images. Also, ran LinkChecker and FileResolver. Yay!
Fixes from Spider check
Output for docker/docker now goes into engine directory
Signed-off-by: Mary Anthony <mary@docker.com>
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
cleaning up docker run -v documentation for man and web reference guide
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
Signed-off-by: Dharmit Shah <shahdharmit@gmail.com>
Added note about process interaction with container in detached mode
Signed-off-by: Dharmit Shah <shahdharmit@gmail.com>
run.md states that the operator can override all defaults set in the Dockerfile, and explicitly says that `--expose` overrides the `EXPOSE` instruction. Neither of these are true. An `EXPOSE` instruction cannot be overridden, `--expose` can only add additional exposed ports.
This change fixes the instructions, and also takes the liberty of crisping up the grammar and phrasing in a place or two.
Signed-off-by: Spencer Brown <spencer@spencerbrown.org>
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Changing vendor/src/github.com/docker/libnetwork to match lindenlab/libnetwork custom-host-port-ranges-1.7 branch
it is possible to pass an UID that has not been created inside the container, clarify this in the docs.
This should fix issue #14795
Signed-off-by: Kai Blin <kai@samba.org>
- fixing headings in run.md
- creating a table for readability
- adding index for logging
- moving logging overview into logging
- Updating with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Put a space after the `###` in the Example section. On the github parser the result file looks ok, but in the docker page (<https://docs.docker.com/reference/run/>) looks ugly.
Signed-off-by: Átila Camurça <camurca.home@gmail.com>
- creating index which is overview of configuring logs
- linking to individual journald/fluent material
- leaving behind table and link to index in run
Signed-off-by: Mary Anthony <mary@docker.com>
Tweaking for Hugo
Updating the Dockerfile with new sed; fix broken link on Kitematic
Fixing image pull for Dockerfile
Removing docs targets
Signed-off-by: Mary Anthony <mary@docker.com>
Alessandro Boch
Madhu Venugopal
Sebastiaan van Stijn
Doug Davis
Ma Shimiao
Aidan Feldman
Vivek Goyal
Qiang Huang
Wen Cheng Ma
Dan Walsh
Kai Qiang Wu(Kennan)
NIWA Hideyuki
John Howard
David Calavera
Sally O'Malley
Mary Anthony
Denis Gladkikh
Sven Dowideit
Mike Brown
Yuan Sun
qhuang
Harald Albers
Tim Hockin
xlgao-zju
Nalin Dahyabhai
Samuel Karp
Dharmit Shah
Ed Costello
Tonis Tiigi
He Simei
Spencer Brown
Don Kjer
Kai Blin
Morgan Bauer
David Cramer
paetling
Mrunal Patel
Raghavendra K T
Átila Camurça Alves
Peeyush Gupta
Ankush Agarwal
TAGOMORI Satoshi
Dennis Docter