This renames the `--time` flag as used on `docker stop` and `docker restart`
to `--timeout`, bringing it in line with other uses for this property,
such as `--stop-timeout` on `docker run`.
The `--time` option is deprecated and hidden, but will be kept for
backward compatibility, as these options existed for a long time.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: 2269acc7a3...164cae56ed
Co-authored-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 964155cd tried to enclose all IPv6 addresses within brackets but
missed some cases. This commit fixes that, and adds a few test cases.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
On Windows, the drive casing doesn't matter outside of WSL. For WSL, the
drives are lowercase. When we're producing a WSL path, lowercase the
drive letter.
Co-authored-by: Jonathan A. Sternberg <jonathan.sternberg@docker.com>
Co-authored-by: Laura Brehm <laurabrehm@hey.com>
Signed-off-by: Jonathan A. Sternberg <jonathan.sternberg@docker.com>
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This checks for the equivalent WSL mount path on windows. WSL will mount
the windows drives at `/mnt/c` (or whichever drive is being used).
This is done by parsing a UNC path with forward slashes from the unix
socket URL.
Signed-off-by: Jonathan A. Sternberg <jonathan.sternberg@docker.com>
The `Commit` type was introduced in 2790ac68b3,
to assist triaging issues that were reported with an incorrect version of
runc or containerd. At the time, both `runc` and `containerd` were not yet
stable, and had to be built from a specific commit to guarantee compatibility.
We encountered various situations where unexpected (and incompatible) versions
of those binaries were packaged, resulting in hard to trace bug-reports.
For those situations, a "expected" version was set at compile time, to
indicate if the version installed was different from the expected version;
docker info
...
runc version: a592beb5bc4c4092b1b1bac971afed27687340c5 (expected: 69663f0bd4b60df09991c08812a60108003fa340)
Both `runc` and `containerd` are stable now, and docker 19.03 and up set the
expected version to the actual version since c65f0bd13c
and 23.0 did the same for the `init` binary b585c64e2b,
to prevent the CLI from reporting "unexpected version".
In short; the `Expected` fields no longer serves a real purpose, so we should
no longer print it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This command was declaring that it requires at least 1 argument, when it
needs exactly 1 argument. This was causing the CLI to panic when the
command was invoked with no argument:
`docker volume update`
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Running `docker login` in a non-interactive environment sometimes errors
out if no username/pwd is provided. This handling is somewhat
inconsistent – this commit addresses that.
Before:
| `--username` | `--password` | Result |
|:------------:|:------------:| ------------------------------------------------------------------ |
| ✅ | ✅ | ✅ |
| ❌ | ❌ | `Error: Cannot perform an interactive login from a non TTY device` |
| ✅ | ❌ | `Error: Cannot perform an interactive login from a non TTY device` |
| ❌ | ✅ | hangs |
After:
| `--username` | `--password` | Result |
|:------------:|:------------:| ------------------------------------------------------------------ |
| ✅ | ✅ | ✅ |
| ❌ | ❌ | `Error: Cannot perform an interactive login from a non TTY device` |
| ✅ | ❌ | `Error: Cannot perform an interactive login from a non TTY device` |
| ❌ | ✅ | `Error: Cannot perform an interactive login from a non TTY device` |
It's worth calling out a separate scenario – if there are previous,
valid credentials, then running `docker login` with no username or
password provided will use the previously stored credentials, and not
error out.
```console
cat ~/.docker/config.json
{
"auths": {
"https://index.docker.io/v1/": {
"auth": "xxxxxxxxxxx"
}
}
}
⭑ docker login 0>/dev/null
Authenticating with existing credentials...
Login Succeeded
```
This commit also applies the same non-interactive handling logic to the
new web-based login flow, which means that now, if there are no prior
credentials stored and a user runs `docker login`, instead of initiating
the new web-based login flow, an error is returned.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Previously, if while polling for oauth device-code login results a user
suspended the process (such as with CTRL-Z) and then restored it with
`fg`, an error might occur in the form of:
```
failed waiting for authentication: You are polling faster than the specified interval of 5 seconds.
```
This is due to our use of a `time.Ticker` here - if no receiver drains
the ticker channel (and timers/tickers use a buffered channel behind the
scenes), more than one tick will pile up, causing the program to "tick"
twice, in fast succession, after it is resumed.
The new implementation replaces the `time.Ticker` with a `time.Timer`
(`time.Ticker` is just a nice wrapper) and introduces a helper function
`resetTimer` to ensure that before every `select`, the timer is stopped
and it's channel is drained.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Normalization/converting the registry address to just a hostname happens
inside of `command.GetDefaultAuthConfig`. Use this value for the rest of
the login flow/storage.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This reverts commit e6624676e0.
Since e6624676e0, during login, we started
normalizing `registry-1.docker.io` to `index.docker.io`. This means that
if a user logs in with `docker login -u [username]
registry-1.docker.io`, the user's credentials get stored in
credhelpers/config.json under `https://index.docker.io/v1/`.
However, while the registry code normalizes an image reference without
registry (`docker pull alpine:latest`) and image references explicitly for
`index.docker.io` (`docker pull index.docker.io/library/alpine:latest`)
to the official index server (`https://index.docker.io/v1/`), and
fetches credentials for that auth key, it does not normalize
`registry-1.docker.io`, which means pulling explicitly from there
(`docker pull registry-1.docker.io/alpine:latest`) will not use
credentials stored under `https://index.docker.io/v1/`.
As such, until changes are made to the registry/pull/push code to
normalize `registry-1.docker.io` to `https://index.docker.io/v1/`, we
should not normalize this during login.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
cli/required.go:33:22: param min has same name as predeclared identifier (predeclared)
func RequiresMinArgs(min int) cobra.PositionalArgs {
^
cli/required.go:50:22: param max has same name as predeclared identifier (predeclared)
func RequiresMaxArgs(max int) cobra.PositionalArgs {
^
cli/required.go:67:24: param min has same name as predeclared identifier (predeclared)
func RequiresRangeArgs(min int, max int) cobra.PositionalArgs {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/utils.go:225:29: printf: non-constant format string in call to github.com/pkg/errors.Wrapf (govet)
return errors.Wrapf(err, fmt.Sprintf("invalid output path: %q must be a directory or a regular file", path))
^
cli/command/manifest/cmd.go:21:33: printf: non-constant format string in call to fmt.Fprintf (govet)
fmt.Fprintf(dockerCli.Err(), "\n"+cmd.UsageString())
^
cli/command/service/remove.go:45:24: printf: non-constant format string in call to github.com/pkg/errors.Errorf (govet)
return errors.Errorf(strings.Join(errs, "\n"))
^
cli/command/service/scale.go:93:23: printf: non-constant format string in call to github.com/pkg/errors.Errorf (govet)
return errors.Errorf(strings.Join(errs, "\n"))
^
cli/command/stack/swarm/remove.go:74:24: printf: non-constant format string in call to github.com/pkg/errors.Errorf (govet)
return errors.Errorf(strings.Join(errs, "\n"))
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/system/info.go:375:5: S1009: should omit nil check; len() for []github.com/docker/docker/api/types/system.NetworkAddressPool is defined as zero (gosimple)
if info.DefaultAddressPools != nil && len(info.DefaultAddressPools) > 0 {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On `docker ps`, port bindings with an IPv6 HostIP should have their
addresses put into brackets when joining them to their ports.
RFC 3986 (Section 3.2.2) stipulates that IPv6 addresses should be
enclosed within square brackets. This RFC is only about URIs. However,
doing so here helps user identifier what's part of the IP address and
what's the port. It also makes it easier to copy/paste that
'[addr]:port' into other software (including browsers).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Don't output the extra spacing around the images when none of the
top-level image entries has any children.
This makes the list look better when ran against the graphdrivers image
store.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Sebastiaan van Stijn
Rob Murray
Sebastiaan van Stijn
Brian Goff
Djordje Lukic
Albin Kerouanton
Jonathan A. Sternberg
Laura Brehm
lentil32
David Karlsson
Paweł Gronowski