This option was added in a08abec9f8d59eaa44c375900e254384a68c5a31,
as part of Docker v25.0, but did not update the docs and manpage.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 9ae514fdc7)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --feature flag allows the boolean value to be omitted.
If only a name is provided, the default is "true".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a357db0aba)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit f13c08246d93dd5aae200d5881a3a374e6cac876 introduced
this flag, but did not yet update the manpage.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 610f9157f5)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Mostly, this makes sure that literals (such as true, false, host,
private, examples of options usage etc.) are typeset in bold, except for
filenames, which are typeset in italic.
While at it,
- remove some default values from synopsis as it should not
be there;
- fix man pages references (page name in bold, volume number in
regular).
This is not a complete fix, but a step in the right direction.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Escape asterisks and underscores, that have special meaning in
Markdown. While most markdown processors are smart enough to
distinguish whether it's a literal * or _ or a formatting directive,
escaping makes things more explicit.
2. Fix using wrong level of headings in some dm options (most are ####,
but some were #####).
3. Do not use sub-heading for examples in some dm options (this is how
it's done in the rest of the man page).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This fix tries to address issues raised in moby/moby#44346.
The max-concurrent-downloads and max-concurrent-uploads limits are applied for the whole engine and not for each pull/push command.
Signed-off-by: Luis Henrique Mulinari <luis.mulinari@gmail.com>
- the `--disable-legacy-registry` daemon flag was removed
- duplicate keys with conflicting values for engine labels
now produce an error instead of a warning.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix 19 typos, grammatical errors and duplicated words.
These fixes have minimal impact on the code as these are either in the
doc files or in comments inside the code files.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
This builds (and depends) on https://github.com/moby/moby/pull/34087
Version 2:
- remove --ipc argument validation (it is now done by daemon)
- add/document 'none' value
- docs/reference/run.md: add a table with better modes description
- dockerd(8) typesetting fixes
Version 3:
- remove ipc mode tests from cli/command/container/opts_test.go
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is a new option added specifically to allow for debugging of bugs
in Docker's storage drivers or libdm itself.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2b8f0eef7338f37104464154ba65aef7db3b9703)
Signed-off-by: Tibor Vass <tibor@docker.com>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Quite a few changes, as it seems like previous wrapping was done
manually, so it's all over the place.
As noted in #28424
Signed-off-by: Jonathan Boulle <jonathanboulle@gmail.com>
This fix tries to add a daemon config parameter `--shutdown-timeout`
that specifies the timeout value to stop containers gracefully
(before SIGKILL). The default value is 15s.
The `--shutdown-timeout` parameter is added to daemon options and
config file. It will also be updated during daemon reload.
Additional test cases have been added to cover the change.
This fix fixes#22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This option was added through commit
0d03c060c7e6800e60833c4462b917ee9b081440,
but didn't update the man page.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds a small C binary for fighting zombies. It is mounted under
`/dev/init` and is prepended to the args specified by the user. You
enable it via a daemon flag, `dockerd --init`, as it is disable by
default for backwards compat.
You can also override the daemon option or specify this on a per
container basis with `docker run --init=true|false`.
You can test this by running a process like this as the pid 1 in a
container and see the extra zombie that appears in the container as it
is running.
```c
int main(int argc, char ** argv) {
pid_t pid = fork();
if (pid == 0) {
pid = fork();
if (pid == 0) {
exit(0);
}
sleep(3);
exit(0);
}
printf("got pid %d and exited\n", pid);
sleep(20);
}
```
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Remove checks that prevent overlay and SELinux from working together.
Fixes are arriving in the 4.9 kernel.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Hostnames are not supported for now because libnetwork can't use them
for overlay networking yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Grace Choi
David Karlsson
Kir Kolyshkin
Sebastiaan van Stijn
Ashly Mathew
Luis Henrique Mulinari
Anca Iordache
Akihiro Suda
Rob Gulewich
Lukas Heeren
taiji-tech
selansen
Renaud Gaubert
Abdur Rehman
Aleksa Sarai
Noah Treuhaft
Brian Goff
David Sheets
Josh Hawn
Aaron.L.Xu
Yong Tang
yuexiao-wang
Zhang Wei
Ben Firshman
Jonathan Boulle
bbayani
Antonio Murdaca
Kenfe-Mickael Laventure
Michael Crosby
Dan Walsh
Aaron Lehmann