It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Add filter support for `network ls` to hide predefined network,
then user can use "docker network rm `docker network ls -f type=custom`"
to delete a bundle of userdefined networks.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Right now, the quiet (-q, --quiet) flag ignores the output
generated from within the container.
However, it ought to be quiet in a way that all kind
of diagnostic output should be ignored, unless the build
process fails.
This patch makes the quiet flag behave in the following way:
1. If the build process succeeds, stdout contains the image ID
and stderr is empty.
2. If the build process fails, stdout is empty and stderr
has the error message and the diagnostic output of that process.
If the quiet flag is not set, then everything goes to stdout
and error messages, if there are any, go to stderr.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
add a note around restart policies only working in detached mode
Signed-off-by: Aidan Feldman <aidan.feldman@gmail.com>
Update restart description with Mary's comments.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- fix naming and formatting
- provide more context when erroring auth
- do not capitalize errors
- fix wrong documentation
- remove ugly remoteError{}
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Allow passing mount propagation option shared, slave, or private as volume
property.
For example.
docker run -ti -v /root/mnt-source:/root/mnt-dest:slave fedora bash
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Each plug-in operates as a separate service, and registers with Docker
through general (plug-ins API)
[https://blog.docker.com/2015/06/extending-docker-with-plugins/]. No
Docker daemon recompilation is required in order to add / remove an
authentication plug-in. Each plug-in is notified twice for each
operation: 1) before the operation is performed and, 2) before the
response is returned to the client. The plug-ins can modify the response
that is returned to the client.
The authorization depends on the authorization effort that takes place
in parallel [https://github.com/docker/docker/issues/13697].
This is the official issue of the authorization effort:
https://github.com/docker/docker/issues/14674
(Here)[https://github.com/rhatdan/docker-rbac] you can find an open
document that discusses a default RBAC plug-in for Docker.
Signed-off-by: Liron Levin <liron@twistlock.com>
Added container create flow test and extended the verification for ps
Closing the HTTP connection requesting a push or pull will cancel the
push or pull. This behavior also applies to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes markdown formatting, and formatting of tables;
- Our markdown engine doesn't support spanning rows, so
re-wrapped table contents.
- Added a CSS-styles to prevent "code" blocks in tables
from wrapping
- The "logging drivers" table didn't have a header
- Aligned table borders in source code for better readability.
- Standardize on using `-it` in stead of -i -t or -ti
- Some markup issues
- Some minor textual fixups
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Closes#9798
@maintainers please note that this is a change to the UX. We no longer
require the -f flag on `docker tag` to move a tag from an existing image.
However, this does make us more consistent across our commands,
see https://github.com/docker/docker/issues/9798 for the history.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Docker daemon uses kv-store as the host-discovery backend.
Discovery module tracks the liveness of a node through a simple
keepalive mechanism. The keepalive mechanism depends on every
node performing heartbeat by registering itself with the discovery
module (via KV-Store Put operation). And for every Put operation,
the discovery module in all other nodes will receive a Watch
notification. That keeps the node alive.
Any node that fails to register itself within the TTL timer is
considered dead and removed from the discovery database.
The default timer (heartbeat = 20 seconds & ttl = 60 seconds)
works fine for small clusters. But for large clusters, these
default timers are extremely aggressive and that causes high CPU
& most of the processing is spent managing the node discovery
and that impacts normal daemon operation.
Hence we need a way to make the discovery ttl and heartbeat
configurable. As the cluster size grows, the user can change
these timers to make sure the daemon scales.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Plugin drivers were added to docker info in
https://github.com/docker/docker/pull/17300
but not added to the example output in the online
docs.
Also fixed mixed tabs/spaces in the API documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit enhance `docker network rm` command to allow user to delete
multi networks at the same time.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fixes#16555
Original docker `cp` always copy symbol link itself instead of target,
now we provide '-L' option to allow docker to follow symbol link to real
target.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
* This commit will mark --before and --since as deprecated, but leave their behavior
unchanged until they are removed, then re-implement them as options for --filter.
* And update the related docs.
* Update the integration tests.
Fixes issue #17716
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
- Optional "--shm-size=" was added to the sub-command(run, create,and build).
- The size of /dev/shm in the container can be changed
when container is made.
- Being able to specify is a numerical value that applies number,
b, k, m, and g.
- The default value is 64MB, when this option is not set.
- It deals with both native and lxc drivers.
Signed-off-by: NIWA Hideyuki <niwa.hiedyuki@jp.fujitsu.com>
Our implementation of systemd cgroups is mixture of systemd api and
plain filesystem api. It's hard to keep it up to date with systemd and
it already contains some nasty bugs with new versions. Ideally it should
be replaced with some daemon flag which will allow to set parent systemd
slice.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
devmapper uses xfs by default now. So include xfsprogs in build
environment. Also update docs to reflect the new default.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This patch adds the ability to run `docker stats` w/o arguments and get
statistics for all running containers by default. Also add a new
`--all` flag to list statistics for all containers (like `docker ps`).
New running containers are added to the list as they show up also.
Add integration tests for this new behavior.
Docs updated accordingly. Fix missing stuff in man/commandline
reference for `docker stats`.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The purpose of this PR is for users to distinguish Docker errors from
contained command errors.
This PR modifies 'docker run' exit codes to follow the chroot standard
for exit codes.
Exit status:
125 if 'docker run' itself fails
126 if contained command cannot be invoked
127 if contained command cannot be found
the exit status otherwise
Signed-off-by: Sally O'Malley <somalley@redhat.com>
- the /etc/hosts read caveat due to dynamic update
- information about docker_gwbridge
- Carries and closes#17654
- Updating with last change by Madhu
- Updating with the IPAM api 1.22
Signed-off-by: Mary Anthony <mary@docker.com>
Removing old networking.md
Updating dockernetworks.md with images
Adding information on network plugins
Adding blurb about links to docker networking
Updating the working documentation
Adding Overlay Getting Started
Downplaying links by removing refs/examples, adding refs/examples for network.
Updating getting started to reflect networks not links
Pulling out old network material
Updating per discussion with Madhu to add Default docs section
Updating with bridge default
Fix bad merge
Updating with new cluster-advertise behavior
Update working and NetworkSettings examples
Correcting example for default bridge discovery behavior
Entering comments
Fixing broken Markdown Syntax
Updating with comments
Updating all the links
Signed-off-by: Mary Anthony <mary@docker.com>
Added Note to show users that signals will not propagate to the container if the preferred exec form isn't used.
Signed-off-by: Eric Rosenberg <ehaydenr@gmail.com>
Adding Related information blocks
Final first draft pass: ready for review
Review comments
Entering comments from the gang
Updating connect to include paused
Signed-off-by: Mary Anthony <mary@docker.com>
This fixes the indentation of the storage driver
options list.
Also wraps/reformats some examples to prevent
horizontal scrollbars on the rendered HTML
Fixes#17140
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Refactor so that the Host flag validation doesn't destroy the user's input,
and then post process the flags when we know the TLS options
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
GitHub flavored markdown is now supported for links and images. Also, ran LinkChecker and FileResolver. Yay!
Fixes from Spider check
Output for docker/docker now goes into engine directory
Signed-off-by: Mary Anthony <mary@docker.com>
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
cleaning up docker run -v documentation for man and web reference guide
Signed-off-by: Mike Brown <brownwm@us.ibm.com>
This leverages recent additions to libkv enabling client
authentication via TLS so the discovery back-end can be locked
down with mutual TLS. Example usage:
docker daemon [other args] \
--cluster-advertise 192.168.122.168:2376 \
--cluster-store etcd://192.168.122.168:2379 \
--cluster-store-opt kv.cacertfile=/path/to/ca.pem \
--cluster-store-opt kv.certfile=/path/to/cert.pem \
--cluster-store-opt kv.keyfile=/path/to/key.pem
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Provide a command line option dm.use_deferred_deletion to enable deferred
device deletion feature. By default feature will be turned off.
Not sure if there is much value in deferred deletion being turned on
without deferred removal being turned on. So for now, this feature can
be enabled only if deferred removal is on.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
- missing help option in `docs/reference/commandline/*.md` (some files
have it, the other I fixed didn't)
- missing `[OPTIONS]` in Usage description
- missing options
- formatting
- start/stop idempotence
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Use `pkg/discovery` to provide nodes discovery between daemon instances.
The functionality is driven by two different command-line flags: the
experimental `--cluster-store` (previously `--kv-store`) and
`--cluster-advertise`. It can be used in two ways by interested
components:
1. Externally by calling the `/info` API and examining the cluster store
field. The `pkg/discovery` package can then be used to hit the same
endpoint and watch for appearing or disappearing nodes. That is the
method that will for example be used by Swarm.
2. Internally by using the `Daemon.discoveryWatcher` instance. That is
the method that will for example be used by libnetwork.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
* Update format for 'Note:' to match other pages.
* Add link to Go's RFC3339Nano timestamp information.
Signed-off-by: Charles Chan <charleswhchan@users.noreply.github.com>
- The build-time variables are passed as environment-context for command(s)
run as part of the RUN primitve. These variables are not persisted in environment of
intermediate and final images when passed as context for RUN. The build environment
is prepended to the intermediate continer's command string for aiding cache lookups.
It also helps with build traceability. But this also makes the feature less secure from
point of view of passing build time secrets.
- The build-time variables also get used to expand the symbols used in certain
Dockerfile primitves like ADD, COPY, USER etc, without an explicit prior definiton using a
ENV primitive. These variables get persisted in the intermediate and final images
whenever they are expanded.
- The build-time variables are only expanded or passed to the RUN primtive if they
are defined in Dockerfile using the ARG primitive or belong to list of built-in variables.
HTTP_PROXY, HTTPS_PROXY, http_proxy, https_proxy, FTP_PROXY and NO_PROXY are built-in
variables that needn't be explicitly defined in Dockerfile to use this feature.
Signed-off-by: Madhav Puri <madhav.puri@gmail.com>
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
This PR makes a user visible behavior change with userland
proxy disabled by default and rely on hairpin NAT to be enabled
by default. This may not work in older (unsupported) kernels
where the user will be forced to enable userlandproxy if needed.
- Updated the Docs
- Changed the integration-cli to start with userlandproxy
desiabled by default.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
For both commands, volume is _not_ optional. Several volumes may
be specified.
Both commands now use the same name (VOLUME) for the command argument.
Signed-off-by: Harald Albers <github@albersweb.de>
Makes it possible to filter containers by image, using
--filter=ancestor=busybox and get all the container running busybox
image and image based on busybox (to the bottom).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Dharmit Shah <shahdharmit@gmail.com>
Added note about process interaction with container in detached mode
Signed-off-by: Dharmit Shah <shahdharmit@gmail.com>
run.md states that the operator can override all defaults set in the Dockerfile, and explicitly says that `--expose` overrides the `EXPOSE` instruction. Neither of these are true. An `EXPOSE` instruction cannot be overridden, `--expose` can only add additional exposed ports.
This change fixes the instructions, and also takes the liberty of crisping up the grammar and phrasing in a place or two.
Signed-off-by: Spencer Brown <spencer@spencerbrown.org>
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Changing vendor/src/github.com/docker/libnetwork to match lindenlab/libnetwork custom-host-port-ranges-1.7 branch
- rewrite intro to Dockerfile reference usage section to remove
references to 'source repository'
- Closes#14714
- Fixes: #8648
- Updating with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
it is possible to pass an UID that has not been created inside the container, clarify this in the docs.
This should fix issue #14795
Signed-off-by: Kai Blin <kai@samba.org>
This reverts commit 40b71adee390e9c06471b89ed845132b4ec80177.
Original commit (for which this is effectively a rebased version) is
72a500e9e5929b038816d8bd18d462a19e571c99 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
Make command like "docker images ubuntu:14.04" work and filter out the
image with the given tag.
Closes#8048.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
All docker subcommands support `-h` as an alias for `--help`
unless they have `-h` aliased to something else like `docker run`,
which uses `-h` for `--hostname`.
`-h` is not included in the help messages of the commands, though.
It ist visible in
* reference: only in `docker daemon` reference,
see output of `grep -Rse --help=false docs`
* man pages: only in `docker` man page
see output of `grep -RF '**-h**' man`
For consistency reasons, this commit removes `-h` as an alias for
`--help` from the reference page, man page and the bash completion.
Signed-off-by: Harald Albers <github@albersweb.de>
- Removing references to Boot2Docker replacing with Docker Machine
- Removing sudo warnings in instances where appropriate (no sudo in file)
- Updating with comments
Signed-off-by: Mary Anthony <mary@docker.com>
- fixing headings in run.md
- creating a table for readability
- adding index for logging
- moving logging overview into logging
- Updating with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
* Add space between values in docker stats output for easier parsing
Old output could not be parsed easily because there were columns
that did not have any separator. Also values that are together
without any space is difficult to read even for humans.
* Update unit.HumanSize comment to match what the does actually does
Signed-off-by: Otto Kekäläinen <otto@seravo.fi>
Options for zfs storage driver were incorrectly placed
under 'exec driver options' header. Move the header to
the correct place.
Now, this is the second time I am fixing this. First time
it was commit 68efb27, but the following commit 9af7afb
screwed it up again, so the header appears twice now.
Get rid of the the wrong one.
Cc: David Calavera <david.calavera@gmail.com>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
- boot2docker is deprecated in the 1.8.0
- docker-machine replaces it
- this fixes#14563
- Updating with thaJetzah comments
Signed-off-by: Mary Anthony <mary@docker.com>
There was a mistake in the plugin_volume.md file regarding the /VolumeDriver.Remove call.
Added fix and a better explanation.
Signed-off-by: Bardia Keyoumarsi <b.keyoumarsi@gmail.com>
* Clarify the list of supported instructions.
* Clarify behavior of ONBUILD, based on comments by @SvenDowideit, @theJeztah in PR #14735.
* Reorder list of instructions in alphabetical order.
Signed-off-by: Charles Chan <charleswhchan@users.noreply.github.com>
PR #11907 added support for import using file (path), but it missed
the update of cli/import.md. This fixes that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Update help line to allow 90 characters instead of 80
The trust flag pushes out the help description column wider, requiring more room to display help messages.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Re-add the docs from @calavera's PR to the moved cli cmd reference docs.
Fix gofmt and vet issues from carried commits
Add integration test for using format with --no-trunc and multi-names
Fix custom_test map order dependency on expected value check
Add docs to reference/commandline/ps.md
Remove "-F" flag option from original carried PR content
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Documented changes to API to enable new `docker cp` behavior.
Added documentation on `docker cp` usage and behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
It was missing some variants and 'maintainer' isn't actually supported.
Also sorted the list of allowed cmds in the code just to make it easier
to diff with the docs.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Carry #11675
Aside from what #11675 says, to me a key usecase for this is to support
more than one Docker cli running at the same time but each may have its
own set of config files.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Put a space after the `###` in the Example section. On the github parser the result file looks ok, but in the docker page (<https://docs.docker.com/reference/run/>) looks ugly.
Signed-off-by: Átila Camurça <camurca.home@gmail.com>
Options for zfs storage driver were incorrectly placed
under 'exec driver options' header. Move the header to
the correct place.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Showing "$$ exit 13" caught my eye and wasn't correct.
While in there I also made it so the following paragraph didn't go past 80 chars
Signed-off-by: Doug Davis <dug@us.ibm.com>
Update the man page for 'docker commit' to make explicit the fact that
'commit' does not save data in volumes.
Addresses comments in #7583
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
The current documentation correctly states that dockerignore pattern
searches are non-recursive. However, the example given for Markdown
files seems to contradict this by saying that `*.md` will exclude *all*
Markdown files. This commit clarifies the situation by explicitly
specifying that `*.md` will only exclude files in the root directory of
the project.
Signed-off-by: Tim Wraight <tim.wraight@tangentlabs.co.uk>
DeviceMapper must be explicitly selected because the Docker binary might not be linked to the right devmapper library.
With this change, Docker fails fast if the driver detection finds the devicemapper directory but the driver is not the default option.
The option `override_udev_sync_check` doesn't make sense anymore, since the user must be explicit to select devicemapper, so it's being removed.
Docker fails to use devicemapper only if Docker has been built statically unless the option was explicit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- creating index which is overview of configuring logs
- linking to individual journald/fluent material
- leaving behind table and link to index in run
Signed-off-by: Mary Anthony <mary@docker.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Upding sed, adding script to avoid redirects, remove mkdos
Signed-off-by: Mary Anthony <mary@docker.com>
Ignoring graphics with sed
Signed-off-by: Mary Anthony <mary@docker.com>
Fixing kitematic image
Signed-off-by: Mary Anthony <mary@docker.com>
Removing draft
Signed-off-by: Mary Anthony <mary@docker.com>
Fixing link
Signed-off-by: Mary Anthony <mary@docker.com>
removing from the menu
Signed-off-by: Mary Anthony <mary@docker.com>
Updatiing order of project material
Signed-off-by: Mary Anthony <mary@docker.com>
Removing from Regsitry v2 content per Olivier
Signed-off-by: Mary Anthony <mary@docker.com>
tweaking the touchup
Signed-off-by: Mary Anthony <mary@docker.com>
Removing include; only used four places; hugo global var replace
Signed-off-by: Mary Anthony <mary@docker.com>
Entering fixes from page-by-page
Signed-off-by: Mary Anthony <mary@docker.com>
Tweaking for Hugo
Updating the Dockerfile with new sed; fix broken link on Kitematic
Fixing image pull for Dockerfile
Removing docs targets
Signed-off-by: Mary Anthony <mary@docker.com>
Adding in other areas per comments
Updating with comments; equalizing generating man page info
Updating with duglin's comments
Doug is right here again;fixing.
Signed-off-by: Mary Anthony <mary@docker.com>
Minor tweak to the quoted/json form and made man page look like the Dockerfile
docs. W/o the `,` people may think there should be a space delimited list.
Signed-off-by: Doug Davis <dug@us.ibm.com>
I added 301 redirects from dockerproject.com to dockerproject.org but may as
well make sure everything is updated anyways.
Signed-off-by: Jessica Frazelle <princess@docker.com>
Fixes#13107. This change enables Go duration strings
computed relative to the client machine’s time to be used
as input parameters to `docker events --since/--until`
and `docker logs --since` arguments.
Added unit tests for pkg/timeutils.GetTimestamp as well.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
While reading some of the docs I noticed a few errors, so I ran
misspellings (https://pypi.python.org/pypi/misspellings) on markdown files
Signed-off-by: Joe Gordon <joe.gordon0@gmail.com>
Noticed that there were a few newlines in the middle of a \`...\` blocks that
made the text look funny when displayed in HTML.
Signed-off-by: Doug Davis <dug@us.ibm.com>
- 79 char line length (non-command).
- Consistent single space between sentences.
- Replace start of line tabs with spaces.
- Remove trailing white space.
- Consistent "**Note:**" style.
https://docs.docker.com/project/doc-style/#notes
- Replace the ``` sections with indented code.
Signed-off-by: Lloyd Dewolf <foolswisdom@gmail.com>
This patch is extending the qualifiers on the -v command to allow
an admin to tell the system to relabel, content. There might be a
need for something similar for changing the DAC Permissions.
Signed-off-by: Jessica Frazelle <princess@docker.com>
Signed by all authors:
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Jeff Lindsay <progrium@gmail.com>
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Signed-off-by: Luke Marsden <luke@clusterhq.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Adding experimental features into the mix
Signed-off-by: Mary Anthony <mary@docker.com>
renaming file
Signed-off-by: Mary Anthony <mary@docker.com>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The `--userland-proxy` daemon flag makes it possible to rely on hairpin
NAT and additional iptables routes instead of userland proxy for port
publishing and inter-container communication.
Usage of the userland proxy remains the default as hairpin NAT is
unsupported by older kernels.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch modifies the journald log driver to store the container ID in
a field named CONTAINER_ID, rather than (ab)using the MESSAGE_ID field.
Additionally, this adds the CONTAINER_ID_FULL field containing the
complete container ID and CONTAINER_NAME, containing the container name.
When using the journald log driver, this permits you to see log messages
from a particular container like this:
# journalctl CONTAINER_ID=a9238443e193
Example output from "journalctl -o verbose" includes the following:
CONTAINER_ID=27aae7361e67
CONTAINER_ID_FULL=27aae7361e67e2b4d3864280acd2b80e78daf8ec73786d8b68f3afeeaabbd4c4
CONTAINER_NAME=web
Closes: #12864
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Single value labels do not work in 1.6 and multi-label instructions only work when separated by non-EOL whitespace.
I also added an example snip from the inspect output with the labels that are included in this guide.
Signed-off-by: Jeff Nickoloff <jeff@allingeek.com>
This PR does the following:
- migrated ~/.dockerfg to ~/.docker/config.json. The data is migrated
but the old file remains in case its needed
- moves the auth json in that fie into an "auth" property so we can add new
top-level properties w/o messing with the auth stuff
- adds support for an HttpHeaders property in ~/.docker/config.json
which adds these http headers to all msgs from the cli
In a follow-on PR I'll move the config file process out from under
"registry" since it not specific to that any more. I didn't do it here
because I wanted the diff to be smaller so people can make sure I didn't
break/miss any auth code during my edits.
Signed-off-by: Doug Davis <dug@us.ibm.com>
using standard unix postfixes add unit test for display
also change doc for memory usage display change
for example GiB will be GB
Signed-off-by: Sun Jianbo <wonderflow@zju.edu.cn>
If an image has been tagged to multiple repos and tags, 'docker
rmi -f IMAGE_ID' will just untag one random repo instead of
untagging all and deleting the image. This patch implement
this. This commit is composed of:
*untag all names and delete the image
*add test to this feature
*modify commandline/cli.md to explain this
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
This provides an override for forcing the daemon to still attempt
running the devicemapper driver even when udev sync is not supported.
Intended to be a very clear impairment for those choosing to use it. If
udev sync is false, there will still be an error in the daemon logs,
even when the override is in place. The docs have an explicit WARNING.
Including link to the docs for users that encounter this daemon error
during an upgrade.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
This flag is passed to the daemon CLI. In my opinion, "Container's
logging driver" is not accurate and refers to 'one container'.
Also the `syslog` driver was missing from the list. Having the list
of all logging drivers won't scale here (should be <80 chars per line)
and we have `rotation` driver coming up in the pipeline as well (gh11485).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Some bullet lists didn't render as bullet-lists because
of a missing newline.
Also added missing "label" filter for `docker ps` and
slightly re-worded the header above the supported filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Syslog was a heading-2, but should be heading-3;
changed the headings to heading-4 to match the
"network settings" section.
Also changed "Log driver" to "logging driver" for JSON.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since `dirperm1` requires a more recent aufs patch than many current OS release,
we cant remove #783 completely. This documents that docker will apply `dirperm1`
automatically for systems that support it
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
We now advise people to configure docker group and
add to sudo. Mac shouldn't use sudo. Removed sudo
from command examples. Left in installation to be removed
in installation doc sweep -- removing requires finer
grain control.
Signed-off-by: Mary Anthony <mary@docker.com>
We now have instructions in our Unix installs about setting up
docker group to avoid sudo. Also, Mac/Windows shouldn't use
sudo. So, I've removed sudo from our examples and added a
section at the top reminding them that if they have to use
sudo to run docker they can change that.
Signed-off-by: Mary Anthony <mary@docker.com>
Having the list in one spot makes it easier for people to see what's
avaiable instead of having to scan all of the docs and extract the info.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Add the capability to cancel the build by disconnecting the client.
This adds a `cancelled` channel which is used to signal that a build
should halt. The build is halted by sending a Kill signal and noticing
that the cancellation channel is closed.
This first pass implementation does not allow cancellation during a
pull, but that will come in a subsequent PR.
* Add documentation of cancellation to cli and API
* Protect job cancellation with sync.Once
* Add TestBuildCancelationKillsSleep
* Add test case for build cancellation of RUN statements.
Signed-off-by: Peter Waller <p@pwaller.net>
Link to new guide. Added a quickstart contributor guide for experienced people.
Converting narrative style to procedures for easier use. I think there is something missing in the
release publishing section...but it looks like it was missing in the original.
Updates per thaJeztah
Edits per Fred
Updating with comments from Sven
Signed-off-by: Mary Anthony <mary@docker.com>
Closes#10191
Allow `docker build` to set --cpu-shares, --cpuset, --memory,
--memory-swap for all containers created by the build.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Copied code from CmdSave into CmdExport. This should work, not an expert in the API calls being made. But it does make more sense to have a consistent export/save flag.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
checkpoint before edits on the export functions
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added an --output flag to docker export and created tests.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
White space cleanup.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Docker-DCO-1.1-Signed-off-by: Joseph Kern <jkern@semafour.net> (github: jfrazelle)
checkpoint before edits on the export functions
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
White space cleanup.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added text to reflect a new output option for the export command.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Whitespace clean up
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added man page documentation for the new --output flag in export
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
The STDOUT behavior of cp is not yet released in 1.50 so removed.
Also, tested against 1.5 all other behaviors and extended documentation to match.
Renamed HOSTPATH to HOSTDIR to give a self documenting name.
Adding back in the references to STDOUT
fix the command string
Entering Doug's comment re append and ~/tmp/foo in the glass
Adding in Doug's comments regarding PATHs and missing |-
Updating with James comments
Signed-off-by: Mary Anthony <mary@docker.com>
Add ability to refer to an image by repository name and digest using the
format repository@digest. Works for pull, push, run, build, and rmi.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
Adds more documentation for labels and adds the label instruction to the
man-pages.
Also included is a document called "Labels - custom meta-data in Docker"
in the user-guide, this is still a work-in-progress I started to describe
the "namespaces" conventions, an example on storing structured data.
I ran a bit "out of steam" (writers block?) on that document, but kept
it in (for now), in case it still ends up useful.
The Remote API documentation changes will need to be moved to the
docker_remote_api_v1.18.md document when rebasing the whole PR.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Darren Shepherd <darren@rancher.com>
Save "LABEL" field in Dockerfile into image content.
This will allow a user to save user data into an image, which
can later be retrieved using:
docker inspect IMAGEID
I have copied this from the "Comment" handling in docker images.
We want to be able to add Name/Value data to an image to describe the image,
and then be able to use other tools to look at this data, to be able to do
security checks based on this data.
We are thinking about adding version names,
Perhaps listing the content of the dockerfile.
Descriptions of where the code came from etc.
This LABEL field should also be allowed to be specified in the
docker import --change LABEL:Name=Value
docker commit --change LABEL:Name=Value
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This adds two more tables to the run reference documentation.
- the list of 'modes' for Network settings is now a table.
- the "note" for `--net="host"` was moved from the list to the detailed
description.
- the 'options' for "Runtime constraints on CPU and memory" are
now a table
- slightly re-worded the description for "memory" options, e.g.
"It is not allowed..." was rewriten to "The *container* is not allowed..."
- fix example in "Runtime privilege, Linux capabilities, and LXC configuration"
being indented twice
- slightly reduced indenting in some `usage` output to be better readable.
- fixes a typo `/ets/hosts` -> `/etc/hosts`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Cgroup resources are host dependent, they should be in hostConfig.
For backward compatibility, we just copy it to hostConfig, and leave it in
Config for now, so there is no regressions, but the right way to use this
throught json is to put it in HostConfig, like:
{
"Hostname": "",
...
"HostConfig": {
"CpuShares": 512,
"Memory": 314572800,
...
}
}
As we will add CpusetMems, CpusetCpus is definitely a better name, but some
users are already using Cpuset in their http APIs, we also make it compatible.
The main idea is keep using Cpuset in Config Struct, and make it has the same
value as CpusetCpus, but not always, some scenarios:
- Users use --cpuset in docker command, it can setup cpuset.cpus and can
get Cpuset field from docker inspect or other http API which will get
config info.
- Users use --cpuset-cpus in docker command, ditto.
- Users use Cpuset field in their http APIs, ditto.
- Users use CpusetCpus field in their http APIs, they won't get Cpuset field
in Config info, because by then, they should already know what happens
to Cpuset.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
A minor thing, but I noticed that the "Reference" drop-down menu just
says "Command line". This was fine when we just had one command line,
but now there's also 'Compose command line' and I suspect we may add
others later. We should qualify the Docker one with the word "Docker"
in front
Signed-off-by: Doug Davis <dug@us.ibm.com>
`docker rmi` output in docs/sources/reference/commandline/cli.md
is different from real scene. This commit fixes it.
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
Read `/proc/sys/net/ipv4/ip_local_port_range` kernel parameter to obtain
ephemeral port range that now sets the boundaries of port allocator
which finds free host ports for those exported by containers.
Signed-off-by: Michal Minar <miminar@redhat.com>
This change adds daemon's system time as RFC3339Nano to the `/info` endpoint
and shows in a more readable format (UnixDate) in `docker -D info` output.
I will be using this to fix the clock skew between the remote test host and
the CI machines running `docker events`-related tests as they're using `--since`
and `--until` and the timestamps are not matching when daemon is not on the
same machine.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The original description has some mistakes and lack of many useful
information, I rewrite them to make it accurate and complete.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This moves some information on restart-policies from
the "command line" page to "run reference".
Also fixes some minor typos and adds a "NOTE"
about --rm and --restart not allowed to be combined.
Also removes inline CSS styles from tables,
which will be styled by the stylesheet, and fixes
some minor MarkDown errors (`<` -> <)
depends on https://github.com/docker/docs-base/pull/1resolves#11069
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and add a testcase to catch this in the future.
While in there I also:
- removed extra periods from the few options that had them (new test)
- made the --filter option consistent across all command
Signed-off-by: Doug Davis <dug@us.ibm.com>
Closes#10807
Adds support for `dockerfile` ONLY when `Dockerfile` can't be found.
If we're building from a Dockerfile via stdin/URL then always download
it a `Dockerfile` and ignore the -f flag.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Use `-it` combination in example instead of `-ti`, because this is how it used everywhere in examples.
Update dockerfile_best-practices.md
Fix typo in command name
Signed-off-by: Dmitry Gusev <dmitry.gusev@gmail.com>
Fixes: 10855
The example was actually incorrect for many situations, and also, now
that we have IPv6 we should not that the example is for IPv4 and note
how to find IPv6 addresses. Also, the device they want to connect to
could be the bridge, or main ethernet device, or some other device
name, so note that as well.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Applied multi parameters to pause and unpause.
Created a new test file dedicated for pause commands.
Created a new utility function to get a slice of paused containers.
Updated documentation
Signed-off-by: André Martins <martins@noironetworks.com>
In order to fit printed messages to fit 80 chars,
rewording messages for `-H` and `--tls` flags.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
It didn't work on v2 anyways. And an image with a lot of aliases was slow to
fetch.
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <princess@docker.com> (github: jfrazelle)
It's ambiguous to say that `ENV` is _functionally equivalent to prefixing the command with `<key>=<value>`_. `ENV` sets the environment for all future commands, but `RUN` can take chained commands like `RUN foo=bar bash -c 'echo $foo' && bash -c 'echo $foo $bar'`. Users with a solid understanding of `exec` may grok this without confusion, but less experienced users may need this distinction.
Signed-off-by: Michael A. Smith <msmith3@ebay.com>
Improve Environment Handling Descriptions
- Link `ENV` and `Environment Replacement`
- Improve side-effects of `ENV` text
- Rearrange avoiding side effects text
Signed-off-by: Michael A. Smith <msmith3@ebay.com>
Reflow change in commit 195f3a3f removed newlines in the config format.
This change reverts the sample config to the original formatting, which
matches the actual config format of a `awsconfig` file.
Signed-off-by: Katie McLaughlin <katie@glasnt.com>
This modifies the "docker help" text so that it is no wider than 80 chars
and each description fits on one line. This will also try to use ~ when
possible
Added a test to make sure we don't go over 80 chars again.
Added a test to make sure we use ~
Applied rules/tests to all docker commands - not just main help text
Closes#10214
Signed-off-by: Doug Davis <dug@us.ibm.com>
The docs around COPY/ADD already mentioned that it will do a relative
copy/add based on WORKDIR, so that part is already ok. Just needed to
tweak the WORKDIR section since w/o mentioning COPY/ADD it can be misleading.
Noticed by @phemmer
Signed-off-by: Doug Davis <dug@us.ibm.com>
See #10141 for more info, but the main point of this is to make sure
that if you do "docker run -e FOO ..." that FOO from the current env
is passed into the container. This means that if there's a value, its
set. But it also means that if FOO isn't set then it should be unset in
the container too - even if it has to remove it from the env. So,
unset HOSTNAME
docker run -e HOSTNAME busybox env
should _NOT_ show HOSTNAME in the list at all
Closes#10141
Signed-off-by: Doug Davis <dug@us.ibm.com>
Fixes#9960
This adds the output of a "Backing Filesystem:" entry to `docker info`
to overlay, aufs, and devicemapper graphdrivers. The default list
includes a fairly complete list of common filesystem names from
linux/include/uapi/linux/magic.h, but if the backing filesystem is not
recognized, the code will simply show "<unknown>"
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
The documentation on `docker export` doesn't mention that
data in volumes is not included in the export.
This adds a note that volumes are not part of the export
and refers to the "Backup, restore, or migrate data volumes"
to give the user some pointers.
Relates to https://github.com/docker/docker/issues/10095
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
We want to be able to use container without the PID namespace. We basically
want containers that can manage the host os, which I call Super Privileged
Containers. We eventually would like to get to the point where the only
namespace we use is the MNT namespace to bring the Apps userspace with it.
By eliminating the PID namespace we can get better communication between the
host and the clients and potentially tools like strace and gdb become easier
to use. We also see tools like libvirtd running within a container telling
systemd to place a VM in a particular cgroup, we need to have communications of the PID.
I don't see us needing to share PID namespaces between containers, since this
is really what docker exec does.
So currently I see us just needing docker run --pid=host
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Add a check to make sure Dockerfile is in the build context
Add docs and a testcase
Make -f relative to current dir, not build context
Signed-off-by: Doug Davis <dug@us.ibm.com>
If .dockerignore mentions either then the client will send them to the
daemon but the daemon will erase them after the Dockerfile has been parsed
to simulate them never being sent in the first place.
an events test kept failing for me so I tried to fix that too
Closes#8330
Signed-off-by: Doug Davis <dug@us.ibm.com>
as noted in https://github.com/boot2docker/boot2docker/issues/690
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
--help and help are successful commands so output should not go to error.
QE teams have requested this change, also users doing docker help | less
or docker run --help | less would expect this to work.
Usage statement should only be printed when the user asks for it.
Errors should print error message and then suggest the docker COMMAND --help
command to see usage information.
The current behaviour causes the user to have to search for the error message
and sometimes scrolls right off the screen. For example a error on a
"docker run" command is very difficult to diagnose.
Finally erros should always exit with a non 0 exit code, if the user
makes a CLI error.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Moved Tianon's PR from: https://github.com/docker/docker/pull/7870
on top of the latest code
Closes: #3936
Signed-off-by: Andrew Page <admwiggin@gmail.com>
Signed-off-by: Doug Davis <dug@us.ibm.com>
Forbid `docker run -t` with a redirected stdin (such as `echo test |
docker run -ti busybox cat`). Forbid `docker exec -t` with a redirected
stdin. Forbid `docker attach` with a redirect stdin toward a tty enabled
container.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
inspired by #9448 and #9487
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
inspired by #9452
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
This adds the docker daemon's root directory to docker info when running
in debug mode. This allows the user to view the root directory where
docker is writing and storing state.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Current description is misleading. It make an impression the --icc=false
prevents containers to talk with each other.
Signed-off-by: Michal Minar <miminar@redhat.com>
Docker-DCO-1.1-Signed-off-by: Michal Minar <miminar@redhat.com> (github: SvenDowideit)
I've re-jigged the run man page so that each option's text begins with the
cli's help text for that flag, and then ay subsequent lines in the man page
are carried forward.
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
The documentation for EXPOSE seems to indicate, that EXPOSE is only relevant in
the context of links, which is not the case.
Signed-off-by: Jacob Atzen <jatzen@gmail.com>
I also needed to add a mflag.IsSet() function that allows you to check
to see if a certain flag was actually specified on the cmd line.
Per #9221 - also tweaked the docs to fix a typo.
Closes#9221
Signed-off-by: Doug Davis <dug@us.ibm.com>
still supports the old form: ENV name value
Also, fixed an issue with the parser where it would ignore lines
at the end of the Dockerfile that ended with \
Closes#2333
Signed-off-by: Doug Davis <dug@us.ibm.com>
COPY/ADD just copies the contents of dirs, not dirs themselves.
This PR tries to clear that up in the docs.
Closes#8775
Signed-off-by: Doug Davis <dug@us.ibm.com>
Signal proxy does work only in non-TTY mode (--tty=false). Man pages and
commands should not lie about it.
Signed-off-by: Michal Minar <miminar@redhat.com>
Next steps, in another PR, would be:
- make all logging go through the logrus stuff
- I'd like to see if we can remove the env var stuff (like DEBUG) but we'll see
Closes#5198
Signed-off-by: Doug Davis <dug@us.ibm.com>
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
The note under the RUN header refers to the CMD instruction. It should refer to the RUN instruction instead.
Signed-off-by: Huu Nguyen <whoshuu@gmail.com>
Reuse WORKDIR wording to specify that the USER instructions affect the
following RUN, CMD, and ENTRYPOINT instructions.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Includes changes to mkdocs yml and removes style info from docs Read Me, adding a link instead.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
Conflicts:
docs/README.md
Revisions to style guide based on review.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
More Style Guide revisions based on review.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
A few more style guide copy edits
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
Made a few tweaks to Dockerfile tutorial links and removed some cruft from the tutorial itself.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
The Dockerfile Instruction to create the .vnc directory results in a failure :
-storepasswd failed for file: /root/.vnc/passwd
Signed-off-by: Madhu Venugopal <madhu@socketplane.io>
Wen Cheng Ma
Qiang Huang
Thomas Swift
Doug Davis
Zhang Wei
Ilya Dmitrichenko
Ma Shimiao
Vincent Demeester
Boaz Shuster
Aidan Feldman
Bryan Boreham
Antonio Murdaca
Ray Tsang
Vivek Goyal
Justas Brazauskas
Liron Levin
Dima Stopel
Aaron Lehmann
Sambuddha Basu
Sebastiaan van Stijn
Chris Weyl
Ben Firshman
gwx296173
Antonio Murdaca
Dan Walsh
Madhu Venugopal
Kai Qiang Wu(Kennan)
Christopher Jones
Sven Dowideit
Mike Brown
NIWA Hideyuki
Mary Anthony
Alexander Morozov
Olle Jonsson
Zhang Kun
pidster
Sally O'Malley
Viktor Stanchev
Anusha Ragunathan
John Howard
Gou Rao
David Calavera
harold cooper
rsmoorthy
Eric Rosenberg
Denis Gladkikh
Shijiang Wei
Jeremy Unruh
Aidan Hobson Sayers
Victor Vieux
Jian Zhang
Mihuleacc Sergiu
Daniel Hiltgen
Luca Marturana
Yuan Sun
Deng Guangxing
Grant Reaber
Jessica Frazelle
Daniel Nephin
Richard Scothern
Arnaud Porterie
Charles Chan
Tim Waugh
qhuang
Hu Keping
Harald Albers
Madhav Puri
Tim Hockin
Amen Belayneh
xlgao-zju
Nalin Dahyabhai
Jana Radhakrishnan
Samuel Karp
Peter Edge
Shishir Mahajan
Dharmit Shah
Brian Goff
Taylor Jones
Sheng Yang
Ed Costello
Tonis Tiigi
Álex González
He Simei
Spencer Brown
Morgan Bauer
bin liu
Don Kjer
Kai Blin
Patrick Hemmer
Tim Dettrick
Ankush Agarwal
Laurent Erignoux
Stephen Rust
Otto Kekäläinen
David Cramer
Kir Kolyshkin
Bardia Keyoumarsi
John Tims
Michał Czeraszkiewicz
Derek McGowan
Nathan McCauley
Andy Rothfusz
Tibor Vass
Mohammed Aaqib Ansari
paetling
jgeiger
Lei
Clinton Kitson
Phil Estes
Josh Hawn
wlan0
Mrunal Patel
Raghavendra K T
Átila Camurça Alves
Harry Zhang
Peeyush Gupta
Lars Kellogg-Stedman
Tim Wraight
Chris McKinnel
Lai Jiangshan
TAGOMORI Satoshi
Chun Chen
Dennis Docter
Moysés Borges
Gildas Cuisinier
ChaYoung You
Marius Sturm
Nicolas Borboën
Jessica Frazelle
Ahmet Alp Balkan
Joe Gordon
Antonio Murdaca
Lloyd Dewolf
Jan-Jaap Driessen
Darren Shepherd
Jörg Thalheim
Gianluca Borello
Marianna
Julien Barbier
Jessica Frazelle
buddhamagnet
Tristan Carel
Rick Wieman
Jeff Nickoloff
Sylvain Baubeau
wonderflow
Eric Windisch
Vincent Batts
David Young
Yan Feng
dalanlan
cheney90
Daniel, Dao Quang Minh
John Willis
Michael West
jimmyxian
Natalie Parker
sidharthamani
Peter Waller
Mary Anthony
Todd Whiteman
Vishnu Kannan
Joseph Kern
Andy Goldstein
Tianon Gravi
Michal Minar
Mabin
ChristoperBiscardi
Srini Brahmaroutu
Zhang Wentao
resouer
Dmitry Gusev
Abin Shahab
André Martins
Colm Hally
Bradley Cicenas
Peter Salvatore
Michael A. Smith
Katie McLaughlin
Chen Hanxiao
Michael Crosby
Sven Dowideit
Liang-Chi Hsieh
Nathan Hsieh
Srini Brahmaroutu
Andreas Köhler
Malte Janduda
Jan Koprowski
Christian Stefanescu
Fred Lifton
shishir-a412ed
Lénaïc Huard
Sindhu S
Tomas Tomecek
Alexander Boyd
Jacob Atzen
James Turnbull
Michael Steinert
Dmitry V. Krivenok
unclejack
pixelistik
decadent
George Xie
Huu Nguyen
Arnaud Porterie
Huayi Zhang
Andrea Luzzardi
Erik Hollensbe
Madhu Venugopal
Ryan Detzel