- do an early check if a custom format is specified either through the
command-line, or through the cli's configuration, before adjusting
the options (to add "size" if needed).
- also removes a redundant `options.Size = opts.size` line, as this value is
already copied at the start of buildContainerListOptions()
- Update NewContainerFormat to use "table" format as a default if no format
was given.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Phong Tran <tran.pho@northeastern.edu>
This makes the containers have an expected console size not only for
`run` but also for `create`. Also remove the comment, as this is no
longer ignored on Linux daemon since e994efcf64c133de799f16f5cd6feb1fc41fade4
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Wording and documentation still need to be updated, but will do
so in a follow-up.
Also removing the default "10 seconds" from the timeout flags, as
this default is not actually used, and may not match the actual
default (which is defined on the daemon side).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Formatting stats runs in a loop to refresh the stats for each container. This
patch makes some small performance improvments by reducing the use of Sprintf
in favor of concatenating strings, and using strconv directly where possible.
Benchmark can be run with:
GO111MODULE=off go test -test.v -test.bench '^BenchmarkStatsFormat' -test.run '^$' ./cli/command/container/
Before/after:
BenchmarkStatsFormatOld-8 2655 428064 ns/op 62432 B/op 5600 allocs/op
BenchmarkStatsFormat-8 3338 335822 ns/op 52832 B/op 4700 allocs/op
Average of 5 runs;
benchstat old.txt new.txt
name old time/op new time/op delta
StatsFormat-8 432µs ± 1% 344µs ± 5% -20.42% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
StatsFormat-8 62.4kB ± 0% 52.8kB ± 0% -15.38% (p=0.000 n=5+4)
name old allocs/op new allocs/op delta
StatsFormat-8 5.60k ± 0% 4.70k ± 0% -16.07% (p=0.008 n=5+5)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/container/hijack.go:188:1⚠️ nolint directive did not match any issue (nolint)
cli/command/image/trust.go:346:1⚠️ nolint directive did not match any issue (nolint)
cli/command/manifest/push.go:211:1⚠️ nolint directive did not match any issue (nolint)
cli/command/trust/signer_remove.go:79:1⚠️ nolint directive did not match any issue (nolint)
internal/pkg/containerized/snapshot.go:95:1⚠️ nolint directive did not match any issue (nolint)
internal/pkg/containerized/snapshot.go:138:1⚠️ nolint directive did not match any issue (nolint)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Prevent completion on "create" subcommands to prevent them
from completing with local filenames
- Add completion for "docker image save"
- Add completion for "docker image tag"
- Disable completion for "docker login"
- Exclude "paused" containers for "docker container attach" and
"docker container exec"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test is very flaky, the retry loop runs for 550ms and some more, 750ms is
cleary not enough for everything to set and for the cli to return the tty resize
error. A sleep of 1.5 seconds in this test should be enough for the retry loop to
finish.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
I some cases, for example if there is a heavy load, the initialization of the TTY size
would fail. This change makes the cli retry 10 times instead of 5 and we wait
incrementally from 10ms to 100ms
Relates to #3554
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
This check doesn't really make sense because the client doesn't know on what
OS the daemon is really running.
The daemon uses the console size on creation when available (on windows).
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
This adds a new annotation to commands that are known to be frequently
used, and allows setting a custom weight/order for these commands to
influence in what order they appear in the --help output.
I'm not entirely happy with the implementation (we could at least use
some helpers for this, and/or make it more generic to group commands
in output), but it could be a start.
For now, limiting this to only be used for the top-level --help, but
we can expand this to subcommands as well if we think it makes sense
to highlight "common" / "commonly used" commands.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test uses two subtests that were sharing the same variable.
Subtests run in a goroutine, which could lead to them concurrently
accessing the variable, resulting in a panic:
=== FAIL: cli/command/container TestRemoveForce/without_force (0.00s)
Error: Error: No such container: nosuchcontainer
--- FAIL: TestRemoveForce/without_force (0.00s)
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x40393f]
goroutine 190 [running]:
testing.tRunner.func1.2({0xb76380, 0x124c9a0})
/usr/local/go/src/testing/testing.go:1389 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1392 +0x39f
panic({0xb76380, 0x124c9a0})
/usr/local/go/src/runtime/panic.go:838 +0x207
sort.StringSlice.Less(...)
/usr/local/go/src/sort/sort.go:319
sort.insertionSort({0xd87380, 0xc00051b3b0}, 0x0, 0x2)
/usr/local/go/src/sort/sort.go:40 +0xb1
sort.quickSort({0xd87380, 0xc00051b3b0}, 0x18?, 0xb4f060?, 0xc000540e01?)
/usr/local/go/src/sort/sort.go:222 +0x171
sort.Sort({0xd87380, 0xc00051b3b0})
/usr/local/go/src/sort/sort.go:231 +0x53
sort.Strings(...)
/usr/local/go/src/sort/sort.go:335
github.com/docker/cli/cli/command/container.TestRemoveForce.func2(0xc0005389c0?)
/go/src/github.com/docker/cli/cli/command/container/rm_test.go:36 +0x125
testing.tRunner(0xc00053e4e0, 0xc00051b140)
/usr/local/go/src/testing/testing.go:1439 +0x102
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1486 +0x35f
=== FAIL: cli/command/container TestRemoveForce (0.00s)
This patch changes the test to use to separate variables.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were creating a stub container, using the current timestamp as
created date. However, if CI was slow to run the test, `Less than a second ago`
would change into `1 second ago`, causing the test to fail:
--- FAIL: TestContainerListNoTrunc (0.00s)
list_test.go:198: assertion failed:
--- expected
+++ actual
@@ -1,4 +1,4 @@
-CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
-container_id busybox:latest "top" Less than a second ago Up 1 second c1
-container_id busybox:latest "top" Less than a second ago Up 1 second c2,foo/bar
+CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+container_id busybox:latest "top" 1 second ago Up 1 second c1
+container_id busybox:latest "top" 1 second ago Up 1 second c2,foo/bar
This patch changes the "created" time of the container to be a minute ago. This
will result in `About a minute ago`, with a margin of 1 minute.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/compose/interpolation/interpolation.go:102:4: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
"invalid interpolation format for %s: %#v. You may need to escape any $ with another $.",
^
cli/command/stack/loader/loader.go:30:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return nil, errors.Errorf("Compose file contains unsupported options:\n\n%s\n",
^
cli/command/formatter/formatter.go:76:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return tmpl, errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/formatter/formatter.go:97:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/image/build.go:257:25: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("error checking context: '%s'.", err)
^
cli/command/volume/create.go:35:27: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Conflicting options: either specify --name or provide positional arg, not both\n")
^
cli/command/container/create.go:160:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("failed to remove the CID file '%s': %s \n", cid.path, err)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this change all `inspect` commands will output a compact JSON
representation of the elements, the default format (indented JSON) stays the
same.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
including all the directives and a link to the documentation.
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this change it is now possible to give a relative path to the --volume and
--mount flags.
$ docker run --mount type=bind,source=./,target=/test ...
$ docker run -v .:/test ...
Fixes#1203
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
This commit fixes spelling mistakes (typos) at a few places in the codebase.
Signed-off-by: Amey Shrivastava <72866602+AmeyShrivastava@users.noreply.github.com>
The DefaultStopSignal const has been deprecated, because the daemon already
handles a default value. The current code did not actually send the default
value unless the flag was set, which also made the flag description incorrect,
because in that case, the _daemon's_ default would be used, which could
potentially be different as was specified here.
This patch removes the default value from the flag, leaving it to the daemon
to set a default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for ALL_PROXY as default build-arg was added recently in
buildkit and the classic builder.
This patch adds the `ALL_PROXY` environment variable to the list of
configurable proxy variables, and updates the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This extends #2929 to Darwin as well as Linux.
Running the example in https://github.com/golang/go/issues/37942
I see lots of:
```
dave@m1 sigurg % uname -ms
Darwin arm64
dave@m1 sigurg % go run main.go
received urgent I/O condition: 2021-05-21 16:03:03.482211 +0100 BST m=+0.014553751
received urgent I/O condition: 2021-05-21 16:03:03.507171 +0100 BST m=+0.039514459
```
Signed-off-by: David Scott <dave@recoil.org>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as mycorp.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Phong Tran
Sebastiaan van Stijn
Paweł Gronowski
Sebastiaan van Stijn
Nicolas De Loof
teivah
Djordje Lukic
Silvin Lubecki
Chee Hau Lim
Amey Shrivastava
Mathieu Champlon
Silvin Lubecki
David Scott
Maximillian Fan Xavier