Some small adjustments for this branch due to some times being renamed
in master;
63.76 cli/command/system/cmd.go:1: : # github.com/docker/cli/cli/command/system [github.com/docker/cli/cli/command/system.test]
63.76 cli/command/system/client_test.go:22:79: undefined: container.Summary
63.76 cli/command/system/client_test.go:38:103: undefined: container.Summary
63.76 cli/command/system/client_test.go:42:21: undefined: container.Summary
63.76 cli/command/system/completion_test.go:30:86: undefined: container.Summary
63.76 cli/command/system/completion_test.go:31:25: undefined: container.Summary
63.76 cli/command/system/completion_test.go:42:86: undefined: container.Summary (typecheck)
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit e1c5180dba)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Keep the linters (and my IDE) happy; these errors should be safe to ignore.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 4b7a1e4613)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This message resulted in code-lines that were too long; move it to a
const together with the other hint. While at it, also suppress unhandled
error, and touch-up the code-comment.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 378a3d7d36)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If restoring the terminal state fails, "echo" no longer works, which means
that anything the user types is no longer shown. The login itself may already
have succeeded, so we should not fail the command, but it's good to inform
the user that this happened, which may give them a clue why things no longer
work as they expect them to work.
With this patch:
docker login -u yourname
Password:
Error: failed to restore terminal state to echo input: something bad happened
Login Succeeded
We should consider printing instructions how to restore this manually (other
than restarting the shell). e.g., 'run stty echo' when in a Linux or macOS shell,
but PowerShell and CMD.exe may need different instructions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3d8b49523d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
we don't support empty passwords; when prompting the user for a password,
we already trim the result, but we didn't do the same for a password that's
passed through stdin or through the `-p` / `--password` flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a21a5f4243)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- move trimming defaultUsername inside the if-branch, as it's the only
location where the result of the trimmed username is use.
- do the reverse for trimming argUser, because the result of trimming
argUser is used outside of the if-branch (not just for the condition).
putting it inside the condition makes it easy to assume the result is
only used locally.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit eda78e9cdc)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
move the "post" check for username being empty inside the branch
that's handling the username, as it's the only branch where username
is mutated after checking if it's empty.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 581cf36bd4)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
remove isDefaultRegistry and inline it where it's used; the code-comment
already outlines what we're looking for, so the intermediate var didn't
add much currently.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a55cfe5f82)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function has multiple conditional branches, which makes it harder
to see at a glance whether authConfig may be partially populated. This
patch instead returns a fresh instance for error returns to prevent any
confusion.
It also removes the named output variables, as they're now no longer used,
and the returned types should already be descriptive enough to understand
what's returned.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3a8485085d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change reduces the flickering of the terminal when
running `docker stats` by buffering the formatted stats
text and printing it in one write.
Should also consume less CPU as we now only have to issue
a single syscall to write the stats text to the terminal.
Signed-off-by: Giedrius Jonikas <giedriusj1@gmail.com>
(cherry picked from commit 0b16070ae6)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Test case for d3f6867e4d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3c78069240)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was names slightly confusing, as it returns a fakeStore,
and it didn't do any constructing, so didn't provide value above just
constructing the type.
I'm planning to add more functionality to the fakeStore, but don't want
to maintain a full-fledged constructor for all of that, so let's remove
this utility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 0dd6f7f1b3)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, the config-file was always updated, even if there
were no changes to save. This could cause issues when the config-file
already had credentials set and was read-only for the current user.
For example, on NixOS, this poses a problem because `config.json` is a
symlink to a write-protected file;
$ readlink ~/.docker/config.json
/home/username/.config/sops-nix/secrets/ghcr_auth
$ readlink -f ~/.docker/config.json
/run/user/1000/secrets.d/28/ghcr_auth
Which causes `docker login` to fail, even if no changes were to be made;
Error saving credentials: rename /home/derek/.docker/config.json2180380217 /home/username/.config/sops-nix/secrets/ghcr_auth: invalid cross-device link
This patch updates the code to only update the config file if changes
were detected. It there's nothing to save, it skips updating the file,
as well as skips printing the warning about credentials being stored
insecurely.
With this patch applied:
$ docker login -u yourname
Password:
WARNING! Your credentials are stored unencrypted in '/root/.docker/config.json'.
Configure a credential helper to remove this warning. See
https://docs.docker.com/go/credential-store/
Login Succeeded
$ docker login -u yourname
Password:
Login Succeeded
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d3f6867e4d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent some tests from failing when running from a pre-compiled
testbinary, and discard output to make the output less noisy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3b38dc67be)
Signed-off-by: Austin Vazquez <macedonv@amazon.com>
Deprecation comments must have an empty line before them, otherwise tools
and linters may not recognise them. While fixing this, also updated the
reference to PromptUserForCredentials to be a docs-link to make it clickable.
Updates 6e4818e7d6.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 54e3685bcd)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Errors type is no longer used by the CLI itself, and this custom
"multi-error" implementation had both limitations (empty list not being
`nil`), as well as formatting not being great. All of this making it not
something to recommend, and better handled with Go's stdlib.
As far as I could find, there's no external consumers of this, but let's
deprecate first, and remove in the next release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d3bafa5f3e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This command was using a custom "multi-error" implementation, but it
had some limitations, and the formatting wasn't great.
This patch replaces it with Go's errors.Join.
Before:
docker plugin remove one two three
Error response from daemon: plugin "one" not found, Error response from daemon: plugin "two" not found, Error response from daemon: plugin "three" not found
After:
docker plugin remove one two three
Error response from daemon: plugin "one" not found
Error response from daemon: plugin "two" not found
Error response from daemon: plugin "three" not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 71ebbb81ae)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch, completion is provided for `--platform` flags:
docker pull --platform<TAB>
linux linux/amd64 linux/arm/v5 linux/arm/v7 linux/arm64/v8 linux/riscv64 wasip1 windows
linux/386 linux/arm linux/arm/v6 linux/arm64 linux/ppc64le linux/s390x wasip1/wasm windows/amd64
Note that `docker buildx build` (with BuildKit) does not yet provide completion;
it's provided through buildx, and uses a different format (accepting multiple
comma-separated platforms). Interestingly, tab-completion for `docker build`
currently uses completion for non-buildkit, and has some other issues that may
have to be looked into.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d42cf96e15)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch, completion is provided for `--platform` flags:
docker run --platform<TAB>
linux linux/amd64 linux/arm/v5 linux/arm/v7 linux/arm64/v8 linux/riscv64 wasip1 windows
linux/386 linux/arm linux/arm/v6 linux/arm64 linux/ppc64le linux/s390x wasip1/wasm windows/amd64
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 8c7f713db6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a utility for completing platform strings.
Platforms offers completion for platform-strings. It provides a non-exhaustive
list of platforms to be used for completion. Platform-strings are based on
[runtime.GOOS] and [runtime.GOARCH], but with (optional) variants added. A
list of recognised os/arch combinations from the Go runtime can be obtained
through "go tool dist list".
Some noteworthy exclusions from this list:
- arm64 images ("windows/arm64", "windows/arm64/v8") do not yet exist for windows.
- we don't (yet) include `os-variant` for completion (as can be used for Windows images)
- we don't (yet) include platforms for which we don't build binaries, such as
BSD platforms (freebsd, netbsd, openbsd), android, macOS (darwin).
- we currently exclude architectures that may have unofficial builds,
but don't have wide adoption (and no support), such as loong64, mipsXXX,
ppc64 (non-le) to prevent confusion.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit ce1aebcc30)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Harald Albers
Sebastiaan van Stijn
Sebastiaan van Stijn
Giedrius Jonikas
Laura Brehm