The existing `remove()` was unused, and using that as name makes it more
consistent with the metadata-store. Also renaming `removeAllEndpointData`
to just `removeEndpoint`, as it's part of the TLS-store, which should already
make it clear it's about (TLS)data.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There's no reason to stop listing contexts if a context does not exist
while iterating over the directories,
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Go conventions are for interfaces to be defined on the receiver side,
and for producers to return concrete types. This patch changes the
constructor to return a concrete type.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The package defined various special errors; these errors existed for two reasons;
- being able to distinguish "not found" errors from other errors (as "not found"
errors can be ignored in various cases).
- to be able to update the context _name_ in the error message after the error
was created. This was needed in cases where the name was not available at the
location where the error was produced (e.g. only the "id" was present), and
the helpers to detect "not found" errors did not support wrapped errors (so
wrapping the error with a "name" could break logic); a `setContextName` interface
and corresponding `patchErrContextName()` utility was created for this (which
was a "creative", but not very standard approach).
This patch:
- Removes the special error-types, replacing them with errdefs definitions (which
is a more common approach in our code-base to detect error types / classes).
- Removes the internal utilities for error-handling, and deprecates the exported
utilities (to allow external consumers to adjust their code).
- Some errors have been enriched with detailed information (which may be useful
for debugging / problem solving).
- Note that in some cases, `patchErrContextName()` was called, but the code
producing the error would never return a `setContextName` error, so would
never update the error message.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was depending on the fact that contextDir's are a string,
and for the test is was using the context _name_ as a pseudo-ID.
This patch updates the test to be more explicit where ID's and where
names are used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows callers to just pass the name, and handle the conversion to ID and
path internally. This also fixes a test which incorrectly used "names" as
pseudo-IDs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit cbec75e2f3 updated `runDocker()` to load
plugin-stubs before `processAliases()` was executed. As a result, plugin
stubs were considered as "builtin commands", causing the alias verification
to fail;
Without alias installed:
```bash
docker version
Client:
Version: 22.06.0-beta.0-140-g3dad26ca2.m
API version: 1.42
Go version: go1.19.1
Git commit: 3dad26ca2
Built: Wed Sep 28 22:36:09 2022
OS/Arch: darwin/arm64
Context: default
...
```
After running `docker buildx install`;
```bash
./build/docker buildx install
cat ~/.docker/config.json
{
"aliases": {
"builder": "buildx"
}
}
./build/docker version
not allowed to alias with builtin "buildx" as target
```
This patch moves loading the stubs _after_ the call to `processAliases()`, so
that verification passes. As an extra precaution, the `processAliases()` function
is also updated to exclude plugin-stub commands.
Note that cbec75e2f3 also introduced a performance
regression, which may be related to the early loading of plugins (and creating
stubs); it looks like various other code locations may also be loading plugins,
for example `tryPluginRun()` calls `pluginmanager.PluginRunCommand()`, which
also traverses plugin directories.
We should look under what circumstances the plugin stub-commands are actually
needed, and make sure that they're only created in those situations.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, running `docker context rm --force` would fail if the context
did not exist. This behavior was different from other commands, which allowed
ignoring non-existing objects.
For example; when trying to remove a non-existing volume, the command would
fail without "force":
```bash
docker volume rm nosuchvolume
Error: No such volume: nosuchvolume
echo $?
1
```
But using the `-f` / `--force` option would make the command complete successfully
(the error itself is still printed for informational purposes);
```bash
docker volume rm -f nosuchvolume
nosuchvolume
echo $?
0
```
With this patch, `docker context rm` behaves the same:
```bash
docker context rm nosuchcontext
context "nosuchcontext" does not exist
echo $?
1
```
```bash
docker context rm -f nosuchcontext
nosuchcontext
echo $?
0
```
This patch also simplifies how we check if the context exists; previously we
would try to read the context's metadata; this could fail if a context was
corrupted, or if an empty directory was present. This patch now only checks
if the directory exists, without first validating the context's data.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also removing redundant defer for env.PatchAll(), which is now automatically
handled in t.Cleanup()
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the mailing list:
We have just released Go versions 1.19.1 and 1.18.6, minor point releases.
These minor releases include 2 security fixes following the security policy:
- net/http: handle server errors after sending GOAWAY
A closing HTTP/2 server connection could hang forever waiting for a clean
shutdown that was preempted by a subsequent fatal error. This failure mode
could be exploited to cause a denial of service.
Thanks to Bahruz Jabiyev, Tommaso Innocenti, Anthony Gavazzi, Steven Sprecher,
and Kaan Onarlioglu for reporting this.
This is CVE-2022-27664 and Go issue https://go.dev/issue/54658.
- net/url: JoinPath does not strip relative path components in all circumstances
JoinPath and URL.JoinPath would not remove `../` path components appended to a
relative path. For example, `JoinPath("https://go.dev", "../go")` returned the
URL `https://go.dev/../go`, despite the JoinPath documentation stating that
`../` path elements are cleaned from the result.
Thanks to q0jt for reporting this issue.
This is CVE-2022-32190 and Go issue https://go.dev/issue/54385.
Release notes:
go1.19.1 (released 2022-09-06) includes security fixes to the net/http and
net/url packages, as well as bug fixes to the compiler, the go command, the pprof
command, the linker, the runtime, and the crypto/tls and crypto/x509 packages.
See the Go 1.19.1 milestone on the issue tracker for details.
https://github.com/golang/go/issues?q=milestone%3AGo1.19.1+label%3ACherryPickApproved
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the mailing list:
We have just released Go versions 1.19.1 and 1.18.6, minor point releases.
These minor releases include 2 security fixes following the security policy:
- net/http: handle server errors after sending GOAWAY
A closing HTTP/2 server connection could hang forever waiting for a clean
shutdown that was preempted by a subsequent fatal error. This failure mode
could be exploited to cause a denial of service.
Thanks to Bahruz Jabiyev, Tommaso Innocenti, Anthony Gavazzi, Steven Sprecher,
and Kaan Onarlioglu for reporting this.
This is CVE-2022-27664 and Go issue https://go.dev/issue/54658.
- net/url: JoinPath does not strip relative path components in all circumstances
JoinPath and URL.JoinPath would not remove `../` path components appended to a
relative path. For example, `JoinPath("https://go.dev", "../go")` returned the
URL `https://go.dev/../go`, despite the JoinPath documentation stating that
`../` path elements are cleaned from the result.
Thanks to q0jt for reporting this issue.
This is CVE-2022-32190 and Go issue https://go.dev/issue/54385.
Release notes:
go1.18.6 (released 2022-09-06) includes security fixes to the net/http package,
as well as bug fixes to the compiler, the go command, the pprof command, the
runtime, and the crypto/tls, encoding/xml, and net packages. See the Go 1.18.6
milestone on the issue tracker for details;
https://github.com/golang/go/issues?q=milestone%3AGo1.18.6+label%3ACherryPickApproved
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove the "deadcode", "structcheck", and "varcheck" linters, as they are
deprecated:
WARN [runner] The linter 'deadcode' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'structcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'varcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [linters context] structcheck is disabled because of generics. You can track the evolution of the generics support by following the golangci/golangci-lint#2649.
And ignore gosec G113, which only affects gp < 1.16.14. and go < 1.17.7
opts/opts.go:398:13: G113: Potential uncontrolled memory consumption in Rat.SetString (CVE-2022-23772) (gosec)
cpu, ok := new(big.Rat).SetString(value)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/container/opts.go:928:2: assigned to src, but reassigned without using the value (wastedassign)
src := ""
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Picking 2 seconds, although that's just a randomly picked timeout;
given that this is only for testing, it's not too important.
e2e/plugin/basic/basic.go:25:12: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
server := http.Server{
Addr: l.Addr().String(),
Handler: http.NewServeMux(),
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Jason Hall