This patch fixes a bug where labels use the same behavior as `--env`, resulting
in a value to be copied from environment variables with the same name as the
label if no value is set (i.e. a simple key, no `=` sign, no value).
An earlier pull request addressed similar cases for `docker run`;
2b17f4c8a8, but this did not address the
same situation for (e.g.) `docker service create`.
Digging in history for this bug, I found that use of the `ValidateEnv`
function for labels was added in the original implementation of the labels feature in
abb5e9a077 (diff-ae476143d40e21ac0918630f7365ed3cR34)
However, the design never intended it to expand environment variables,
and use of this function was either due to either a "copy/paste" of the
equivalent `--env` flags, or a misunderstanding (the name `ValidateEnv` does
not communicate that it also expands environment variables), and the existing
`ValidateLabel` was designed for _engine_ labels (which required a value to
be set).
Following the initial implementation, other parts of the code followed
the same (incorrect) approach, therefore leading the bug to be introduced
in services as well.
This patch:
- updates the `ValidateLabel` to match the expected validation
rules (this function is no longer used since 31dc5c0a9a),
and the daemon has its own implementation)
- corrects various locations in the code where `ValidateEnv` was used instead of `ValidateLabel`.
Before this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker service inspect --format '{{json .Spec.Labels}}' test
{"SOME_ENV_VAR":"I_AM_SOME_ENV_VAR"}
```
After this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker container inspect --format '{{json .Config.Labels}}' test
{"SOME_ENV_VAR":""}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If no fields related to an update config or restart policy are
specified, these structs should not be created as part of the service,
to avoid hardcoding the current defaults.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
… or could be in `opts` package. Having `runconfig/opts` and `opts`
doesn't really make sense and make it difficult to know where to put
some code.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
These validators are only used by runconfig.Parse() or some other part of the
client, so move them into the client-side package.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
This function was only being used from a single place opts/opts.go. This
change moves it from a incohesive package (parsers) to the single place it
is used.
Also made a bunch of the helper methods private because they are not used
by any external modules.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
The first param on opts.ParseHost() wasn't being used for anything.
Once we get rid of that param we can then also clean-up some code
that calls ParseHost() because the param that was passed in wasn't
being used for anything else.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Refactor so that the Host flag validation doesn't destroy the user's input,
and then post process the flags when we know the TLS options
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
This fixes two problems:
1. docker run --device /dev/sda:rw ubuntu bash doesn't work
2. --device /dev/zero:/dev/noro:ro doesn't show clear error message,
but fail when writing to cgroup file.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Fixes: #10655
As noted in the issue, bad format was being returned even if the format
was appropriate, but the IP was invalid. This adds a better error
message for when the IP address fails validation.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Since the separator for extra host settings (for /etc/hosts in a
container) is a ":", the code that handles extra hosts needed to only
split on the first ":" to preserve IPv6 addresses which are passed via
the command line settings as well as stored in the JSON container
config.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Passing RepositoryInfo to ResolveAuthConfig, pullRepository, and pushRepository
Moving --registry-mirror configuration to registry config
Created resolve_repository job
Repo names with 'index.docker.io' or 'docker.io' are now synonymous with omitting an index name.
Adding test for RepositoryInfo
Adding tests for opts.StringSetOpts and registry.ValidateMirror
Fixing search term use of repoInfo
Adding integration tests for registry mirror configuration
Normalizing LookupImage image name to match LocalName parsing rules
Normalizing repository LocalName to avoid multiple references to an official image
Removing errorOut use in tests
Removing TODO comment
gofmt changes
golint comments cleanup. renaming RegistryOptions => registry.Options, and RegistryServiceConfig => registry.ServiceConfig
Splitting out builtins.Registry and registry.NewService calls
Stray whitespace cleanup
Moving integration tests for Mirrors and InsecureRegistries into TestNewIndexInfo unit test
Factoring out ValidateRepositoryName from NewRepositoryInfo
Removing unused IndexServerURL
Allowing json marshaling of ServiceConfig. Exposing ServiceConfig in /info
Switching to CamelCase for json marshaling
PR cleanup; removing 'Is' prefix from boolean members. Removing unneeded json tags.
Removing non-cleanup related fix for 'localhost:[port]' in splitReposName
Merge fixes for gh9735
Fixing integration test
Reapplying #9754
Adding comment on config.IndexConfigs use from isSecureIndex
Remove unused error return value from isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Adding back comment in isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
In that case /etc/resolv.conf will be generated with no search
option. Usage: --dns-search=.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
Add a --dns-search parameter and a DnsSearch
configuration field for specifying dns search
domains.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
Sebastiaan van Stijn
Josh Soref
Vincent Demeester
Aaron Lehmann
wefine
David Calavera
Daniel Nephin
John Howard
Lei Jitang
Doug Davis
Sven Dowideit
Qiang Huang
Tibor Vass
Eric-Olivier Lamey
wlan0
Tomáš Hrčka
Phil Estes
Don Kjer
Solomon Hykes
Victor Vieux
Jan Pazdziora
Fabio Falci
Daniel Norberg
Victor Vieux