The DefaultStopSignal const has been deprecated, because the daemon already
handles a default value. The current code did not actually send the default
value unless the flag was set, which also made the flag description incorrect,
because in that case, the _daemon's_ default would be used, which could
potentially be different as was specified here.
This patch removes the default value from the flag, leaving it to the daemon
to set a default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for ALL_PROXY as default build-arg was added recently in
buildkit and the classic builder.
This patch adds the `ALL_PROXY` environment variable to the list of
configurable proxy variables, and updates the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The previous example was out of date. I changed the distro & pined the
tag to help prevent the new example from becoming out of date too.
Signed-off-by: Kelton Bassingthwaite <KeltonBassingthwaite@gmail.com>
The `ENV key value` form can be ambiguous, for example, the following defines
a single env-variable (`ONE`) with value `"TWO= THREE=world"`:
ENV ONE TWO= THREE=world
While we cannot deprecate/remove that syntax (as it would break existing
Dockerfiles), we should reduce exposure of the format in our examples.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/spf13/cobra/compare/v0.0.3...v1.0.0
Notable Changes
- Fish completion (including support for Go custom completion)
- API (urgent): Rename BashCompDirectives to ShellCompDirectives
- Remove/replace SetOutput on Command - deprecated
- Custom completions coded in Go (instead of Bash)
- Partial Revert of 922
- Correct documentation for InOrStdin
- Apply formatting to templates
- Revert change so help is printed on stdout again
- Update md2man to v2.0.0
- update viper to v1.4.0
- Update cmd/root.go example in README.md
vendor: update cpuguy83/go-md2man v2.0.0
full diff: https://github.com/cpuguy83/go-md2man/compare/v1.0.8...v2.0.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker push` command up until [v0.9.1](https://github.com/moby/moby/blob/v0.9.1/api/client.go#L998)
always pushed all tags of a given image, so `docker push foo/bar` would push (e.g.)
all of `foo/bar:latest`, `foo:/bar:v1`, `foo/bar:v1.0.0`.
Pushing all tags of an image was not desirable in many case, so docker v0.10.0
enhanced `docker push` to optionally specify a tag to push (`docker push foo/bar:v1`)
(see https://github.com/moby/moby/issues/3411 and the pull request that implemented
this: https://github.com/moby/moby/pull/4948).
This behavior exists up until today, and is confusing, because unlike other commands,
`docker push` does not default to use the `:latest` tag when omitted, but instead
makes it push "all tags of the image"
For example, in the following situation;
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
```
Running `docker push thajeztah/myimage` seemingly does the expected behavior (it
pushes `thajeztah/myimage:latest` to Docker Hub), however, it does not so for the
reason expected (`:latest` being the default tag), but because `:latest` happens
to be the only tag present for the `thajeztah/myimage` image.
If another tag exists for the image:
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
thajeztah/myimage v1.0.0 b534869c81f0 41 hours ago 1.22MB
```
Running the same command (`docker push thajeztah/myimage`) will push _both_ images
to Docker Hub.
> Note that the behavior described above is currently not (clearly) documented;
> the `docker push` reference documentation (https://docs.docker.com/engine/reference/commandline/push/)
does not mention that omitting the tag will push all tags
This patch changes the default behavior, and if no tag is specified, `:latest` is
assumed. To push _all_ tags, a new flag (`-a` / `--all-tags`) is added, similar
to the flag that's present on `docker pull`.
With this change:
- `docker push myname/myimage` will be the equivalent of `docker push myname/myimage:latest`
- to push all images, the user needs to set a flag (`--all-tags`), so `docker push --all-tags myname/myimage:latest`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There's little way of knowing what each exit status means at present
because it's not documented. I'm assuming they are the same as docker
run.
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
That is, reindent the two sections by one space.
While the code was done by hand the `.golden` files had the extra space
inserted with emacs' `string-insert-rectangle` macro to (try to) avoid possible
manual errors. The docs were edited the same way.
Signed-off-by: Ian Campbell <ijc@docker.com>
Right now the only client side info we have is whether debug is enabled, but we
expect more in the future.
We also preemptively prepare for the possibility of multiple errors when
gathering both daemon and client info.
Signed-off-by: Ian Campbell <ijc@docker.com>
A while ago, Docker split the "Domainname" field out from the "Hostname"
field for the container configuration. There was no real user-visible
change associated with this (and under the hood "Domainname" was mostly
left unused from the command-line point of view). We now add this flag
in order to match other proposed changes to allow for setting the NIS
domainname of a container.
This also includes a fix for the --hostname parsing tests (they would
not error out if only one of .Hostname and .Domainname were incorrectly
set -- which is not correct).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The `docker image rm` command can be used not only
to remove images but also remove tags.
This update improves the documentation to make
this clear.
Signed-off-by: Filip Jareš <filipjares@gmail.com>
I am attempting to push a tag to a private repository. The documentation for `docker tag` has an explicit example to for how ["To push an image to a private registry"](https://docs.docker.com/engine/reference/commandline/tag/#tag-an-image-referenced-by-name). My colleague clarified that this command does not in fact push anything, so I thought this PR might save some future novice the same confusion.
Signed-off-by: Jake Lambert <jake.lambert@volusion.com>
Previously our man pages included the current time each time they were
generated. This causes an issue for reproducible builds, since each
re-build of a package that includes the man pages will have different
times listed in the man pages.
To fix this, add support for SOURCE_DATE_EPOCH (which is a standardised
packaging environment variable, designed to be used specifically for
this purpose[1]). spf13/cobra doesn't support this natively yet (though
I will push a patch for that as well), but it's simpler to fix it
directly in docker/cli.
[1]: https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Gleb Stsenov
CrazyMax
Sebastiaan van Stijn
Sebastiaan van Stijn
Dmitriy Fishman
Kelton Bassingthwaite
KGB33
Anca Iordache
Tianon Gravi
Arnaud Rebillout
Charlotte Mach
Des Preston
Akihiro Suda
Rob Gulewich
usb79
Lukas Heeren
Odin Ugedal
Eric Curtin
Silvin Lubecki
Ian Campbell
Akihiro Suda
Aleksa Sarai
Vincent Demeester
Filip Jareš
Jake Lambert
John Howard
taiji-tech