Commit ddadd3db49 changed
the heading levels of various sections, but as a result,
the "daemon configuration file" section (and other sections)
changed from a H2 to a H4, therefore no longer showing
up in the page's TOC / navigation bar.
This patch changes the heading level to a H3 for
sections that should show up in the page navigation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When deploying a stack from a compose file, the output did not show
that a secret or config was created. This patch adds messages for these.
Create a configuration file and compose file:
$ cat > config.yml <<EOF
hello: world
EOF
$ cat > secret.txt <<EOF
p@ssw0rd
EOF
$ cat > docker-compose.yml <<EOF
version: "3.3"
services:
test:
image: nginx:alpine
configs:
- source: myconfig
target: /my-config.yml
secrets:
- source: mysecret
target: /my-secret.txt
configs:
myconfig:
file: ./config.yml
secrets:
mysecret:
file: ./secret.txt
EOF
Before this patch is applied:
$ docker stack deploy -c docker-compose.yml example
Creating network example_default
Creating service example_test
After this patch is applied:
$ docker stack deploy -c docker-compose.yml example
Creating network example_default
Creating secret example_mysecret
Creating config example_myconfig
Creating service example_test
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Port mappings in `docker service ls` are quite verbose, and occupy a lot of
space when ranges of ports are published.
This patch improves the output by reconstructing ranges of ports.
Given the following service;
$ docker service create \
-p 60-61:60-61 \
-p 62:61 \
-p 80:80 \
-p 81:80 \
-p 90-95:90-95 \
-p 90-92:90-92/udp \
-p 93-96:93-96/udp \
--name foo \
nginx:alpine
Before this patch is applied:
$ docker service ls
ID NAME MODE REPLICAS IMAGE PORTS
u1kwguv841qg foo replicated 1/1 nginx:alpine *:60->60/tcp,*:61->61/tcp,*:62->61/tcp,*:80->80/tcp,*:81->80/tcp,*:90->90/tcp,*:91->91/tcp,*:92->92/tcp,*:93->93/tcp,*:94->94/tcp,*:95->95/tcp,*:90->90/udp,*:91->91/udp,*:92->92/udp,*:93->93/udp,*:94->94/udp,*:95->95/udp,*:96->96/udp
After this patch is applied:
$ docker service ls
ID NAME MODE REPLICAS IMAGE PORTS
u1kwguv841qg foo replicated 1/1 nginx:alpine *:60-62->60-61/tcp,*:80-81->80/tcp,*:90-95->90-95/tcp,*:90-96->90-96/udp
Additional enhancements can still be made, and marked as TODO in this change;
- combine non-consecutive ports mapped to a single port (`80->80`, `81->80`,
`84->80`, `86->80`, `87->80`); to be printed as `*:80-81,84,86-87->80`.
- combine `tcp` and `udp` mappings if their port-mapping is the same;
print `*:80-81->80-81/tcp+udp` instead of `*:80-81->80-81/tcp, *:80-81->80-81/udp`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Running `docker service ps --quiet` should print the
full, non-truncated ID, even if the `--no-trunc` option
is not set.
This patch disables truncation if the `--quiet` flag
is set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
updates to the same version as is currently used
on moby/moby; this bump contains fixes for ppc64le.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker container stats` output has a column (`CONTAINER`), that shows either
the container _id_ or container _name_, depending on the arguments given.
For example, running `docker container stats foobar` shows:
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
foobar 0.00% 1.938MiB / 1.952GiB 0.10% 782B / 0B 4.11MB / 0B 2
Whereas `docker container stats 67b2525d8ad1` (`67b2525d8ad1` being the ID for
container `foobar`) shows:
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad1 0.00% 1.938MiB / 1.952GiB 0.10% 916B / 0B 4.11MB / 0B 2
This behavior is confusing.
This patch updates the default output format for `docker stats` to use separate
columns for container ID and container Name (similar to `docker container ls`).
With this patch applied, both commands show the same output:
$ docker container stats foobar
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad10bb236a49960e93c09993b0baabeef12c2d46cd5f4fbb6f4808c foobar 0.00% 1.938MiB / 1.952GiB 0.10% 1.25kB / 0B 4.11MB / 0B 2
$ docker container stats 67b2525d8ad1
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad10bb236a49960e93c09993b0baabeef12c2d46cd5f4fbb6f4808c foobar 0.00% 1.938MiB / 1.952GiB 0.10% 1.31kB / 0B 4.11MB / 0B 2
Users that want to use the old format can configure a custom format in the
cli configuration file (`~/.docker/config.json`);
on Linux:
{
"statsFormat" : "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.MemPerc}}\t{{.NetIO}}\t{{.BlockIO}}\t{{.PIDs}}"
}
on Windows:
{
"statsFormat" : "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.NetIO}}\t{{.BlockIO}}"
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`strings.Trim()` strips any character listed in the `cutset` argument,
so any example section having `E`, `x`, `a`, `m`, `p`, `l`, `e`, or `s`
in the first word, had these characters missing in the generated
YAML.
Also trim superfluent whitespace characters to consistently use `|-` ("strip")
as block chomping indicator (see http://www.yaml.org/spec/1.2/spec.html#id2794534)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The update includes bug fixes in gometalinter and updates to linters, which
discovered more linter problems.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Phil Estes
Daniel Nephin
Sebastiaan van Stijn
Vincent Demeester
Frieder Bluemle
Sebastiaan van Stijn
Brian Goff
Daniel Nephin
Stephen J Day
Victor Vieux
Matt Gucci
Riyaz Faizullabhoy
Allen Sun
Tycho Andersen