`--label-file` has the exact same behavior as `--env-file`, meaning any
placeholder (i.e. a simple key, no `=` sign, no value), it will get the
value from the environment variable.
For `--label-file` it should just add an empty label.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
I noticed that we're using a homegrown package for assertions. The
functions are extremely similar to testify, but with enough slight
differences to be confusing (for example, Equal takes its arguments in a
different order). We already vendor testify, and it's used in a few
places by tests.
I also found some problems with pkg/testutil/assert. For example, the
NotNil function seems to be broken. It checks the argument against
"nil", which only works for an interface. If you pass in a nil map or
slice, the equality check will fail.
In the interest of avoiding NIH, I'm proposing replacing
pkg/testutil/assert with testify. The test code looks almost the same,
but we avoid the confusion of having two similar but slightly different
assertion packages, and having to maintain our own package instead of
using a commonly-used one.
In the process, I found a few places where the tests should halt if an
assertion fails, so I've made those cases (that I noticed) use "require"
instead of "assert", and I've vendored the "require" package from
testify alongside the already-present "assert" package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
If no fields related to an update config or restart policy are
specified, these structs should not be created as part of the service,
to avoid hardcoding the current defaults.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This type is only used by CLI code. It duplicates SecretReference in the
types/swarm package. Change the CLI code to use that type instead.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds 'consistency' mode flags to the mount command line argument.
Initially, the valid 'consistency' flags are 'consistent', 'cached',
'delegated', and 'default'.
Signed-off-by: David Sheets <dsheets@docker.com>
Signed-off-by: Jeremy Yallop <yallop@docker.com>
We ignored errors for simple syntax in `PortOpt` (missed that in the
previous migration of this code). This make sure we don't ignore
`nat.Parse` errors.
Test has been migrate too (errors are not exactly the same as before
though -_-)
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix made several updates:
1. Update opts.MemBytes so that default value will not show up.
The reason is that in case a default value is decided by daemon,
instead of client, we actually want to not show default value.
2. Move `docker run/create/build` to use opts.MemBytes for `--shm-size`
This is to bring consistency between daemon and docker run
3. docs updates.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix catches the case where there is a single container port
and a dynamic host port and will fail out gracefully
Example docker-compose.yml snippet:
port:
ports:
- "8091-8093:8091"
- "80:8080"
Signed-off-by: Tony Abboud <tdabboud@hotmail.com>
Commit a77f2450c70312f8c26877a18bfe2baa44d4abb9 switched `docker run`
to use the `pflags` package. Due to this change, the usage output for
the `--blkio-weight-device` and `--device-*` flags changed and now
showed `weighted-device`, and `throttled-device` as value type. As a
result, the output of `docker run --help` became a lot wider.
This patch changes the output to show `list` instead, which is
consistent with other options that allow to be set multiple times.
Output before this change;
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device weighted-device Block IO weight (relative device weight) (default [])
--device list Add a host device to the container (default [])
--device-read-bps throttled-device Limit read rate (bytes per second) from a device (default [])
--device-read-iops throttled-device Limit read rate (IO per second) from a device (default [])
--device-write-bps throttled-device Limit write rate (bytes per second) to a device (default [])
--device-write-iops throttled-device Limit write rate (IO per second) to a device (default [])
-w, --workdir string Working directory inside the container
Output after this change;
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device list Block IO weight (relative device weight) (default [])
--device list Add a host device to the container (default [])
--device-read-bps list Limit read rate (bytes per second) from a device (default [])
--device-read-iops list Limit read rate (IO per second) from a device (default [])
--device-write-bps list Limit write rate (bytes per second) to a device (default [])
--device-write-iops list Limit write rate (IO per second) to a device (default [])
-w, --workdir string Working directory inside the container
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
… or could be in `opts` package. Having `runconfig/opts` and `opts`
doesn't really make sense and make it difficult to know where to put
some code.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
`--publish-add 8081:81 --publish-add 8082:82 --publish-rm 80
--publish-rm 81/tcp --publish-rm 82/tcp` would thus result in 81 and
82 to be published.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Currently `--publish-rm` only accepts `<TargetPort>` or `<TargetPort>[/Protocol]`
though there are some confusions.
Since `--publish-add` accepts `<PublishedPort>:<TargetPort>[/Protocol]`, some user
may provide `--publish-rm 80:80`. However, there is no error checking so the incorrect
provided argument is ignored silently.
This fix adds the check to make sure `--publish-rm` only accepts `<TargetPort>[/Protocol]`
and returns error if the format is invalid.
The `--publish-rm` itself may needs to be revisited to have a better UI/UX experience,
see discussions on:
https://github.com/docker/swarmkit/issues/1396https://github.com/docker/docker/issues/25200#issuecomment-236213242https://github.com/docker/docker/issues/25338#issuecomment-240787002
This fix is short term measure so that end users are not misled by the silently ignored error
of `--publish-rm`.
This fix is related to (but is not a complete fix):
https://github.com/docker/swarmkit/issues/1396
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Vincent Demeester
Andrew Hsu
Tibor Vass
Sami Tabet
Vincent Demeester
Sebastiaan van Stijn
Daniel Nephin
Wataru Ishida
Josh Soref
Sebastiaan van Stijn
Abhinandan Prativadi
Aaron Lehmann
Evan Hazlett
David Sheets
Yong Tang
Tony Abboud
yuexiao-wang
Victor Vieux
wefine
Jana Radhakrishnan