The `docker push` command up until [v0.9.1](https://github.com/moby/moby/blob/v0.9.1/api/client.go#L998)
always pushed all tags of a given image, so `docker push foo/bar` would push (e.g.)
all of `foo/bar:latest`, `foo:/bar:v1`, `foo/bar:v1.0.0`.
Pushing all tags of an image was not desirable in many case, so docker v0.10.0
enhanced `docker push` to optionally specify a tag to push (`docker push foo/bar:v1`)
(see https://github.com/moby/moby/issues/3411 and the pull request that implemented
this: https://github.com/moby/moby/pull/4948).
This behavior exists up until today, and is confusing, because unlike other commands,
`docker push` does not default to use the `:latest` tag when omitted, but instead
makes it push "all tags of the image"
For example, in the following situation;
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
```
Running `docker push thajeztah/myimage` seemingly does the expected behavior (it
pushes `thajeztah/myimage:latest` to Docker Hub), however, it does not so for the
reason expected (`:latest` being the default tag), but because `:latest` happens
to be the only tag present for the `thajeztah/myimage` image.
If another tag exists for the image:
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
thajeztah/myimage v1.0.0 b534869c81f0 41 hours ago 1.22MB
```
Running the same command (`docker push thajeztah/myimage`) will push _both_ images
to Docker Hub.
> Note that the behavior described above is currently not (clearly) documented;
> the `docker push` reference documentation (https://docs.docker.com/engine/reference/commandline/push/)
does not mention that omitting the tag will push all tags
This patch changes the default behavior, and if no tag is specified, `:latest` is
assumed. To push _all_ tags, a new flag (`-a` / `--all-tags`) is added, similar
to the flag that's present on `docker pull`.
With this change:
- `docker push myname/myimage` will be the equivalent of `docker push myname/myimage:latest`
- to push all images, the user needs to set a flag (`--all-tags`), so `docker push --all-tags myname/myimage:latest`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There's little way of knowing what each exit status means at present
because it's not documented. I'm assuming they are the same as docker
run.
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
That is, reindent the two sections by one space.
While the code was done by hand the `.golden` files had the extra space
inserted with emacs' `string-insert-rectangle` macro to (try to) avoid possible
manual errors. The docs were edited the same way.
Signed-off-by: Ian Campbell <ijc@docker.com>
Right now the only client side info we have is whether debug is enabled, but we
expect more in the future.
We also preemptively prepare for the possibility of multiple errors when
gathering both daemon and client info.
Signed-off-by: Ian Campbell <ijc@docker.com>
A while ago, Docker split the "Domainname" field out from the "Hostname"
field for the container configuration. There was no real user-visible
change associated with this (and under the hood "Domainname" was mostly
left unused from the command-line point of view). We now add this flag
in order to match other proposed changes to allow for setting the NIS
domainname of a container.
This also includes a fix for the --hostname parsing tests (they would
not error out if only one of .Hostname and .Domainname were incorrectly
set -- which is not correct).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The `docker image rm` command can be used not only
to remove images but also remove tags.
This update improves the documentation to make
this clear.
Signed-off-by: Filip Jareš <filipjares@gmail.com>
I am attempting to push a tag to a private repository. The documentation for `docker tag` has an explicit example to for how ["To push an image to a private registry"](https://docs.docker.com/engine/reference/commandline/tag/#tag-an-image-referenced-by-name). My colleague clarified that this command does not in fact push anything, so I thought this PR might save some future novice the same confusion.
Signed-off-by: Jake Lambert <jake.lambert@volusion.com>
Previously our man pages included the current time each time they were
generated. This causes an issue for reproducible builds, since each
re-build of a package that includes the man pages will have different
times listed in the man pages.
To fix this, add support for SOURCE_DATE_EPOCH (which is a standardised
packaging environment variable, designed to be used specifically for
this purpose[1]). spf13/cobra doesn't support this natively yet (though
I will push a patch for that as well), but it's simpler to fix it
directly in docker/cli.
[1]: https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The list of changes here is too long to be described.
Maybe it's better to just rewrite the page from scratch, but at list this commit
makes some things better than before.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Use the proper man typesetting when describing the options
(i.e. use italics for variable parts, bold for literals).
Expand the description. Give better examples. Refer to mknod(2).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Describe the possible values for `--restart`, `--ipc`, and `--network`
options. While at it, improve formatting for `--name` options arguments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
- the `--disable-legacy-registry` daemon flag was removed
- duplicate keys with conflicting values for engine labels
now produce an error instead of a warning.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker daemon` subcommand was only present for
backward compatibility, but deprecated in v1.13,
and scheduled for removal in v17.12
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix 19 typos, grammatical errors and duplicated words.
These fixes have minimal impact on the code as these are either in the
doc files or in comments inside the code files.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
This builds (and depends) on https://github.com/moby/moby/pull/34087
Version 2:
- remove --ipc argument validation (it is now done by daemon)
- add/document 'none' value
- docs/reference/run.md: add a table with better modes description
- dockerd(8) typesetting fixes
Version 3:
- remove ipc mode tests from cli/command/container/opts_test.go
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The `is-task` filter was only documented in the usage
section, but this section is not used in the documentation.
This patch adds the missing filter, synchronises the
man page source, and does some slight rephrasing
and reformatting of the filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a new option added specifically to allow for debugging of bugs
in Docker's storage drivers or libdm itself.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2b8f0eef7338f37104464154ba65aef7db3b9703)
Signed-off-by: Tibor Vass <tibor@docker.com>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This is synonymous with `docker run --cidfile=FILE` and writes the digest of
the newly built image to the named file. This is intended to be used by build
systems which want to avoid tagging (perhaps because they are in CI or
otherwise want to avoid fixed names which can clash) by enabling e.g. Makefile
constructs like:
image.id: Dockerfile
docker build --iidfile=image.id .
do-some-more-stuff: image.id
do-stuff-with <image.id
Currently the only way to achieve this is to use `docker build -q` and capture
the stdout, but at the expense of losing the build output.
In non-silent mode (without `-q`) with API >= v1.29 the caller will now see a
`JSONMessage` with the `Aux` field containing a `types.BuildResult` in the
output stream for each image/layer produced during the build, with the final
one being the end product. Having all of the intermediate images might be
interesting in some cases.
In silent mode (with `-q`) there is no change, on success the only output will
be the resulting image digest as it was previosuly.
There was no wrapper to just output an Aux section without enclosing it in a
Progress, so add one here.
Added some tests to integration cli tests.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This does some minor fix-ups in the CLI reference
for "history", and copies the formattting section to
the man-pages.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the request in 31324 by adding
`--filter scope=swarm|local` for `docker network ls`.
As `docker network ls` has a `SCOPE` column by default,
it is natural to add the support of `--filter scope=swarm|local`.
This fix adds the `scope=swarm|local` support for
`docker network ls --filter`.
Related docs has been updated.
Additional unit test cases have been added.
This fix fixes 31324.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The `reference` filter is documented in the file, but is not present
in the list of available filters.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Added 'golint', 'yamllint', and 'swagger'
- Fixed man/Dockerfile.aarch64 by bootstrapping Go 1.7.5
Signed-off-by: Boris Pruessmann <boris@pruessmann.org>
This is especially important for distributions like NixOS where `/bin/bash` doesn't exist, or for MacOS users who've installed a newer version of Bash than the one that comes with their OS.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Fixes manpages for p and z by downloading a specific version
of go instead of relying on the distro version.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This introduce a new `--device-cgroup-rule` flag that allow a user to
add one or more entry to the container cgroup device `devices.allow`
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
- Use the word letter rather than character to refer to letters ;) when trying to specify that only letters and numbers can be used, and not ANY character...
- Small corrections
Fixes#29821
Signed-off-by: Timothy Hobbs <timothy@hobbs.cz>
Issue #30082 demonstrated that their is possible confusion with the "/."
where the tailing "." can appear to be merely punctuation within the
document rather than a highly pertinent part of `SRC_PATH`.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
Sebastiaan van Stijn
Rob Gulewich
Sebastiaan van Stijn
usb79
Lukas Heeren
Odin Ugedal
Eric Curtin
Silvin Lubecki
Ian Campbell
Akihiro Suda
Aleksa Sarai
Vincent Demeester
Filip Jareš
Jake Lambert
John Howard
taiji-tech
Lee Gaines
selansen
Tibor Vass
Kir Kolyshkin
Renaud Gaubert
Daniel Nephin
Daniel Nephin
Jamie Hannaford
Abdur Rehman
Vincent Demeester
Christophe Vidal
Tibor Vass
Alessandro Boch
Noah Treuhaft
Tonis Tiigi
Ian Campbell
Brian Goff
David Sheets
Antonio Murdaca
Josh Hawn
mapk0y
Yong Tang
Jeremy Yallop
Santhosh Manohar
Boris Pruessmann
Aaron.L.Xu
Tony Abboud
Zhang Wei
Andrew McDonnell
Tianon Gravi
Christopher Jones
Andrew Hsu
Kenfe-Mickael Laventure
Timothy Hobbs
Harald Albers
yuexiao-wang
lixiaobing10051267
Victor Vieux
Misty Stanley-Jones
Michael