`docker stack services --filter=label=foo=bar --filter=label=foo=baz my-stack` with Swarm gets handled as `filter on (a label named foo with value bar) AND (a label named foo with value baz).
This obviously yields an empty result set every time, but if and how this should be changed is out of scope here, so simply align Kubernetes with Swarm for now.
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
Before this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Notice that the memory limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000
},
"Reservations": {
"NanoCPUs": 2000000000
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Notice that the CPU limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"MemoryBytes": 209715200
},
"Reservations": {
"MemoryBytes": 209715200
}
}
After this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Confirm that the CPU limits/reservations are updated, but memory limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Confirm that the Mempry limits/reservations are updated, but CPU limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
}
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker version` output now uses a tabwriter, so use single
tabs to print the output.
Before this change:
Server:
Engine:
Version: 18.05.0-ce
API version: 1.37 (minimum version 1.12)
Go version: go1.10.1
Git commit: f150324
Built: Wed May 9 22:20:16 2018
OS/Arch: linux/amd64
Experimental: true
Kubernetes:
Version: v1.9.6
StackAPI: v1beta2
After this change:
Server:
Engine:
Version: 18.05.0-ce
API version: 1.37 (minimum version 1.12)
Go version: go1.10.1
Git commit: f150324
Built: Wed May 9 22:20:16 2018
OS/Arch: linux/amd64
Experimental: true
Kubernetes:
Version: v1.9.6
StackAPI: v1beta2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Switch from x/net/context to context made "go vet" see the previously
unseen errors:
> cli/command/container/start.go:57::error: the cancelFun function is
> not used on all paths (possible context leak) (vet)
> cli/command/container/start.go:63::error: this return statement may be
> reached without using the cancelFun var defined on line 57 (vet)
> cli/command/container/run.go:159::error: the cancelFun function is not
> used on all paths (possible context leak) (vet)
> cli/command/container/run.go:164::error: this return statement may be
> reached without using the cancelFun var defined on line 159 (vet)
Do call the cancel function.
Note we might end up calling it twice which is fine as long as I can see
from the Go 1.10 source code.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since go 1.7, "context" is a standard package. Since go 1.9,
x/net/context merely provides some types aliased to those in
the standard context package.
The changes were performed by the following script:
for f in $(git ls-files \*.go | grep -v ^vendor/); do
sed -i 's|golang.org/x/net/context|context|' $f
goimports -w $f
for i in 1 2; do
awk '/^$/ {e=1; next;}
/\t"context"$/ {e=0;}
{if (e) {print ""; e=0}; print;}' < $f > $f.new && \
mv $f.new $f
goimports -w $f
done
done
[v2: do awk/goimports fixup twice]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Removing a host by `<host>:<ip>` should only remove occurences of the host with
a matching IP-address, instead of removing all entries for that host.
In addition, combining `--host-rm` and `--host-add` for the same host should
result in the new host being added.
This patch fixes the way the diff is calculated to allow combining
removing/adding, and to support entries having both a canonical, and aliases.
Aliases cannot be added by the CLI, but are supported in the Service spec, thus
should be taken into account:
Entries can be removed by either a specific `<host-name>:<ip-address>`
mapping, or by `<host>` alone:
- If both IP-address and host-name is provided, only remove the hostname
from entries that match the given IP-address.
- If only a host-name is provided, remove the hostname from any entry it
is part of (either as _canonical_ host-name, or as _alias_).
- If, after removing the host-name from an entry, no host-names remain in
the entry, the entry itself should be removed.
For example, the list of host-entries before processing could look like this:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host1 host4",
"127.0.0.3 host1",
"127.0.0.1 host1",
}
Removing `host1` removes every occurrence:
hosts = &[]string{
"127.0.0.2 host3 host2 host4",
"127.0.0.1 host4",
}
Whereas removing `host1:127.0.0.1` only remove the host if the IP-address matches:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host4",
"127.0.0.3 host1",
}
Before this patch:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.4 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[]
After this patch is applied:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.5 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[127.0.0.2 foo 127.0.0.3 foo 127.0.0.4 foo]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "update" and "rollback" configurations were cross-wired, as a result, setting
`--rollback-*` options would override the service's update-options.
Creating a service with both update, and rollback configuration:
docker service create \
--name=test \
--update-failure-action=pause \
--update-max-failure-ratio=0.6 \
--update-monitor=3s \
--update-order=stop-first \
--update-parallelism=3 \
--rollback-failure-action=continue \
--rollback-max-failure-ratio=0.5 \
--rollback-monitor=4s \
--rollback-order=start-first \
--rollback-parallelism=2 \
--tty \
busybox
Before this change:
docker service inspect --format '{{json .Spec.UpdateConfig}}' test \
&& docker service inspect --format '{{json .Spec.RollbackConfig}}' test
Produces:
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
After this change:
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
{"Parallelism":2,"FailureAction":"continue","Monitor":4000000000,"MaxFailureRatio":0.5,"Order":"start-first"}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This ensures Windows paths are handled correctly as explained in the path package documentation.
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
It will be helpful to expose the pull implementation which supports
pulling private images for other CLI commands that rely on helper images.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
- Some of them don't make sense anymore
- Some are deprecated and removed from the engine since a few versions
already.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Sebastiaan van Stijn
Mathieu Champlon
Sebastiaan van Stijn
Simon Ferquel
Vincent Demeester
Victor Vieux
Anda Xu
Brian Goff
Kir Kolyshkin
Essam A. Hassan
Justyn Temme
Silvin Lubecki
Daniel Hiltgen
Vincent Demeester