Setting `Setsid` is needed for SSH connection helper with `ProxyCommand`
config, so as to detach TTY.
e.g.
$ cat ~/.ssh/config
Host foo
Hostname foo
ProxyCommand ssh -W %h:%p bastion
$ DOCKER_HOST=ssh://foo docker run -it --rm alpine
/ #
Fix#1707
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
After switching to Go 1.12, the format-string causes an error;
```
=== Errors
cli/config/config_test.go:154:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:217:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:253:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:288:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:435:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:448:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
DONE 1115 tests, 2 skipped, 6 errors in 215.984s
make: *** [Makefile:22: test-coverage] Error 2
Exited with code 2
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `conn` here is `*winio.win32MessageBytePipe` which does not have a
`CloseRead` method (it does have `CloseWrite`) resulting in:
docker@WIN-NUC0 C:\Users\docker>.\docker-windows-amd64.exe system dial-stdio
the raw stream connection does not implement halfCloser
Also disable the path which uses this for cli-plugins on Windows.
Signed-off-by: Ian Campbell <ijc@docker.com>
Plugins are expected to be management commands ("docker <object> <verb>").
This patch modified the usage output to shown plugins in the "Management commands"
section.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a bit manual (as the unit test attests) so we may find we want to add
some helpers/accessors, but this is enough to let plugins use it and to
preserve the information through round-trips.
Signed-off-by: Ian Campbell <ijc@docker.com>
- The placement of the vendor is now in the end of the line.
- A '*' is now added as suffix of plugins' top level commands.
Signed-off-by: Ulysses Souza <ulysses.souza@docker.com>
This means that plugins can use whatever methods the monolithic CLI supports,
which is good for consistency.
This relies on `os.Args[0]` being something which can be executed again to
reach the same binary, since it is propagated (via an envvar) to the plugin for
this purpose. This essentially requires that the current working directory and
path are not modified by the monolithic CLI before it launches the plugin nor
by the plugin before it initializes the client. This should be the case.
Previously the fake apiclient used by `TestExperimentalCLI` was not being used,
since `cli.Initialize` was unconditionally overwriting it with a real one
(talking to a real daemon during unit testing, it seems). This wasn't expected
nor desirable and no longer happens with the new arrangements, exposing the
fact that no `pingFunc` is provided, leading to a panic. Add a `pingFunc` to
the fake client to avoid this.
Signed-off-by: Ian Campbell <ijc@docker.com>
Fairly straight forward. It became necessary to wrap `Plugin.Err` with a type
which implements `encoding.MarshalText` in order to have that field rendered
properly in the `docker info -f '{{json}}'` output.
Since I changed the type somewhat I also added a unit test for `formatInfo`.
Signed-off-by: Ian Campbell <ijc@docker.com>
To do this we add a stub `cobra.Command` for each installed plugin (only when
invoking `help`, not for normal running).
This requires a function to list all available plugins so that is added here.
Signed-off-by: Ian Campbell <ijc@docker.com>
Also includes the scaffolding for finding a validating plugin candidates.
Argument validation is moved to RunE to support this, so `noArgs` is removed.
Signed-off-by: Ian Campbell <ijc@docker.com>
- The `/build/prune` endpoint was added in API v1.31
- The `/network` endpoints were added in API v1.21
This patch hides these commands on older API versions
Before this change:
```
DOCKER_API_VERSION=1.0 docker
...
Management Commands:
builder Manage builds
container Manage containers
image Manage images
manifest Manage Docker image manifests and manifest lists
network Manage networks
system Manage Docker
trust Manage trust on Docker images
```
After this change
```
DOCKER_API_VERSION=1.0 docker
...
Management Commands:
container Manage containers
image Manage images
manifest Manage Docker image manifests and manifest lists
system Manage Docker
trust Manage trust on Docker images
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
That is, the helper to be used from the plugin's `main`.
Also add a `helloworld` plugin example and build integration.
Signed-off-by: Ian Campbell <ijc@docker.com>
I authored this for `contentTrustEnabled` prior to 7f207f3f95, so this now
tests the funcation argument version.
Signed-off-by: Ian Campbell <ijc@docker.com>
This helps to avoid circular includes, by separating the pure data out from the
actual functionality in the cli subpackage, allowing other code which is
imported to access the data.
Signed-off-by: Ian Campbell <ijc@docker.com>
... and expose. I would like to use this from another site.
This implies also moving (and exposing) the `visitAll` helper.
Unit test them while I'm here.
Signed-off-by: Ian Campbell <ijc@docker.com>
All of the current callers follow the pattern:
dockerPreRun(opts)
err := dockerCli.Initialize(opts) ...
So there is no semantic change into merging the content of `dockerPreRun` into the head of `Initialize`.
I'm about to add a new caller outside of the `cmd/docker` package and this
seems preferable exporting `DockerPreRun`.
Signed-off-by: Ian Campbell <ijc@docker.com>
This will allow plugins to have custom typed endpoints, as well as
create/remove/update contexts with the exact same results as the main
CLI (thinking of things like `docker ee login https://my-ucp-server
--context ucp-prod)`
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
That is, reindent the two sections by one space.
While the code was done by hand the `.golden` files had the extra space
inserted with emacs' `string-insert-rectangle` macro to (try to) avoid possible
manual errors. The docs were edited the same way.
Signed-off-by: Ian Campbell <ijc@docker.com>
Right now the only client side info we have is whether debug is enabled, but we
expect more in the future.
We also preemptively prepare for the possibility of multiple errors when
gathering both daemon and client info.
Signed-off-by: Ian Campbell <ijc@docker.com>
Last batch of modifications to the context switch implementation missed
some documentation updates. This is an update to the CLI reference and
the store implementation Godoc.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Proxies configured in config.json were only taking effect
when using `docker run`, but were being ignored when
using `docker create`.
Before this change:
echo '{"proxies":{"default":{"httpProxy":"httpProxy","httpsProxy":"httpsProxy","noProxy":"noProxy","ftpProxy":"ftpProxy"}}}' > config.json
docker inspect --format '{{.Config.Env}}' $(docker --config=./ create busybox)
[PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin]
With this change applied:
echo '{"proxies":{"default":{"httpProxy":"httpProxy","httpsProxy":"httpsProxy","noProxy":"noProxy","ftpProxy":"ftpProxy"}}}' > config.json
docker inspect --format '{{.Config.Env}}' $(docker --config=./ create busybox)
[NO_PROXY=noProxy no_proxy=noProxy FTP_PROXY=ftpProxy ftp_proxy=ftpProxy HTTP_PROXY=httpProxy http_proxy=httpProxy HTTPS_PROXY=httpsProxy https_proxy=httpsProxy PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin]
Reported-by: Silvano Cirujano Cuesta <Silvanoc@users.noreply.github.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `DOCKER_HIDE_LEGACY_COMMANDS` environment variable allows hiding legacy
top-level commands that are now available under `docker <object> <verb>`. The
`docker deploy` top-level command is experimental, and replaced by
`docker stack deploy`.
This patch hides the top-level `docker deploy` if the `DOCKER_HIDE_LEGACY_COMMANDS`
environment variable is set.
Before this change:
DOCKER_HIDE_LEGACY_COMMANDS=1 docker --help
...
Commands:
build Build an image from a Dockerfile
deploy Deploy a new stack or update an existing stack
login Log in to a Docker registry
logout Log out from a Docker registry
run Run a command in a new container
search Search the Docker Hub for images
version Show the Docker version information
...
With this patch applied:
DOCKER_HIDE_LEGACY_COMMANDS=1 docker --help
...
Commands:
build Build an image from a Dockerfile
login Log in to a Docker registry
logout Log out from a Docker registry
run Run a command in a new container
search Search the Docker Hub for images
version Show the Docker version information
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This PR adds a store to the CLI, that can be leveraged to persist and
retrieve credentials for various API endpoints, as well as
context-specific settings (initially, default stack orchestrator, but we
could expand that).
This comes with the logic to persist and retrieve endpoints configs
for both Docker and Kubernetes APIs.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Add `--quiet` to the `docker image pull` subcommand that will not pull
the image quietly.
```
$ docker pull -q golang
Using default tag: latest
```
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Previously, these errors were only printed when using `docker run`, but were
omitted when using `docker container create` and `docker container start`
separately.
Given that these warnings apply to both situations, this patch moves generation
of these warnings to `docker container create` (which is also called by
`docker run`)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A while ago, Docker split the "Domainname" field out from the "Hostname"
field for the container configuration. There was no real user-visible
change associated with this (and under the hood "Domainname" was mostly
left unused from the command-line point of view). We now add this flag
in order to match other proposed changes to allow for setting the NIS
domainname of a container.
This also includes a fix for the --hostname parsing tests (they would
not error out if only one of .Hostname and .Domainname were incorrectly
set -- which is not correct).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
This PR chnages allow user to configure data path
port number. By default we use 4789 port number. But this commit
will allow user to configure port number during swarm init.
Data path port can't be modified after swarm init.
Signed-off-by: selansen <elango.siva@docker.com>
A recent change in moby/moby made tests with missing client mocks fail with panic.
This adds those missing mocks for the impacted tests.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
- make it possible to extract the formatter implementation from the
"common" code, that way, the formatter package stays small
- extract some formatter into their own packages
This is essentially moving the "formatter" implementation of each type
in their respective packages. The *main* reason to do that, is to be
able to depend on `cli/command/formatter` without depending of the
implementation detail of the formatter. As of now, depending on
`cli/command/formatter` means we depend on `docker/docker/api/types`,
`docker/licensing`, … — that should not be the case. `formatter`
should hold the common code (or helpers) to easily create formatter,
not all formatter implementations.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Avoid testing for session support in non-buildkit builder to support
servers that falsely report as `1.39` compatible
Signed-off-by: Tibor Vass <tibor@docker.com>
gofmt/goimports changed some heuristics in 1.11 and the code is now
formatted slightly differently.
No functional change, just whitespace.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Fix this warning from go-1.11
> cli/registry/client/fetcher.go:234: Debugf format %s has arg
> repoEndpoint of wrong type client.repositoryEndpoint
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Unlike `docker build --secret`, `docker build --ssh` allows the build container to
use SSH keys with passphrases.
$ eval $(ssh-agent)
$ ssh-add ~/.ssh/id_rsa
(Input your passphrase here)
$ docker build --ssh default=$SSH_AUTH_SOCK ...
This feature requires the daemon with `CapExecMountSSH` build capability (moby/moby#37973) .
Currently, the official Dockerfile frontend does not provide the syntax for using the SSH forwarder.
However, the experimental `RUN --mount=type=ssh` syntax can be enabled by using
the Dockerfile frontend image built with the `BUILDTAGS="dfrunmount dfssh"`, via the `# syntax =` "shebang".
The Dockerfile for the Dockerfile frontend is available at github.com/moby/buildkit/frontend/dockerfile/cmd/dockerfile-frontend)
The pre-built image is also available as `tonistiigi/dockerfile:ssh20181002` .
An example Dockerfile with `RUN --mount=type=ssh`:
# syntax = tonistiigi/dockerfile:ssh20181002
FROM alpine
RUN apk add --no-cache openssh-client
RUN mkdir -p -m 0700 ~/.ssh && ssh-keyscan gitlab.com >> ~/.ssh/known_hosts
RUN --mount=type=ssh ssh git@gitlab.com | tee /hello
# "Welcome to GitLab, @GITLAB_USERNAME_ASSOCIATED_WITH_SSHKEY" should be printed here
More info available at moby/buildkit#608, moby/buildkit#655
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit 92932647d3)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Prior refactoring passes missed a corner case.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit dee37936e5)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
During the refactoring for 18.09 the activate/update flows no longer
restart the engine explicitly but let the user do that when they're ready,
so the health check logic is no longer required.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit f2b2061cc3)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a follow up PR to #1381 to address some of the review comments
we didn't get to.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit c12e23a4c1)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Help the user understand which license they're about
to load in case they have multiple licenses they need to
figure out.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit 5a97a93ae1)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Due to a typo, substitution would not work if the given
environment-variable was set.
Given the following docker compose file;
```yaml
version: "3.7"
services:
app:
image: nginx:${version:-latest}
```
Deploying a stack with `$version` set would ignore the `$version`
environment variable, and use the default value instead;
```bash
version=alpine docker stack deploy -c docker-compose.yml foobar
Creating network foobar_default
Creating service foobar_app
docker service ls
ID NAME MODE REPLICAS IMAGE PORTS
rskkjxe6sm0w foobar_app replicated 1/1 nginx:latest
```
This patch also fixes "soft default" not detecting empty environment variables,
only non-set environment variables.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit 6004d74b1f)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Address code review comemnts and purge additional dead code.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit f250152bf4)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Adapt the CLI to the host install model for 18.09.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit 342afe44fb)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
(cherry picked from commit cfec8027ed)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
If, for some reason, the certs directory has permissions that are
inaccessible by docker, we should still be able to fetch manifests using
the `insecure` flag.
Since the cli doesn't access the engine's list of insecure registries,
the registry client should make a singleton list of the registry being queried with the
`insecure` flag.
Closes#1358
Signed-off-by: Christy Norman <christy@linux.vnet.ibm.com>
The integration test TestExportContainerWithOutputAndImportImage in moby/moby is the same as TestExportContainerAndImportImage,
except for the output file option. Adding a unit test to cover the output file option of the export command here allows
the removal of the redundant integration test TestExportContainerWithOutputAndImportImage.
Signed-off-by: Arash Deshmeh <adeshmeh@ca.ibm.com>
The config file was being truncated first, which created a window during
which it was empty, causing concurrent uses of the `docker` command to
potentially fail with:
WARNING: Error loading config file: /var/lib/jenkins/.docker/config.json: EOF
Error response from daemon: Get https://registry/v2/foo/manifests/latest: no basic auth credentials
Signed-off-by: Benoit Sigoure <tsunanet@gmail.com>
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
(cherry picked from commit 68be7cb376)
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Warnings are now generated by the daemon, and returned as
part of the /info API response.
If warnings are returned by the daemon; use those instead
of generating them locally.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This feature brings new attribute/option for swarm init command.
default-addr-pool will take string input which can be in below format.
"CIDR,CIDR,CIDR...:SUBNET-SIZE".
Signed-off-by: selansen <elango.siva@docker.com>
This new collection of commands supports initializing a local
engine using containerd, updating that engine, and activating
the EE product
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
This patch adds a new builder subcommand, allowing to add more builder-related
commands in the future. Unfortunately `build` expects an argument so could not
be used as a subcommand.
This also implements `docker builder prune`, which is needed to prune the builder
cache manually without having to call `docker system prune`.
Today when relying on the legacy builder, users are able to prune dangling images
(used as build cache) by running `docker image prune`. This patch allows the
same usecase with buildkit.
Signed-off-by: Tibor Vass <tibor@docker.com>
This patch implements `docker build --secret id=mysecret,src=/secret/file`
for buildkit frontends that request the mysecret secret.
It is currently implemented in the tonistiigi/dockerfile:secrets20180808
frontend via RUN --mount=type=secret,id=mysecret
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the experimental --console flag to --progress following
feedback indicating avoidable confusion.
In addition to naming changes, the help output now has an additional
clarification, specifically: container output during builds are only
shown when progress output is set to plain. Not mentioning this was also
a big cause of confusion.
Signed-off-by: Tibor Vass <tibor@docker.com>
… as it is possible to do it when interpolating. It also fixes when
there is 2 variables on the same *value* (in the composefile, on the
same line)
Finaly, renaming the default, used in cli, pattern to `defaultPattern`
to not be shadowed unintentionally.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
e.g. docker -H ssh://me@server
The `docker` CLI also needs to be installed on the remote host to
provide `docker system dial-stdio`, which proxies the daemon socket to stdio.
Please refer to docs/reference/commandline/dockerd.md .
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
It allows to get easily all the variables defined in a
composefile (the `map[string]interface{}` representation that
`loader.ParseYAML` returns at least) and their default value too.
This commit also does some small function extract on substitution
funcs to reduce a tiny bit duplication.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
PersistentPreRunE needs to be called within the help function to initialize all the flags (notably the orchestrator flag)
Add an e2e test as regression test
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
This should make it easier for people to write custom composefile
parser without duplicating too much code. It takes the default
transformers and any additional number of transformer for any
types. That way it's possible to transform a `cli/compose` map into a
custom type that would use some of `cli/compose` types and its own.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This flag was added in Docker 17.06, API version 1.31 through
moby@8dc8cd4719f165c01c98e7d3ce1d6cea6a8f60b8, but didn't add
API-version annotations.
This patch adds the missing annotations to hide this flag if
the CLI is connected to an older version of the daemon that
doesn't support that API.
Before this patch:
DOCKER_API_VERSION=1.30 docker swarm init --help | grep data-path-addr
--data-path-addr string Address or interface to use for data path traffic (format: <ip|interface>)
DOCKER_API_VERSION=1.31 docker swarm init --help | grep data-path-addr
--data-path-addr string Address or interface to use for data path traffic (format: <ip|interface>)
With this patch applied:
DOCKER_API_VERSION=1.30 docker swarm init --help | grep data-path-addr
# (no result)
DOCKER_API_VERSION=1.31 docker swarm init --help | grep data-path-addr
--data-path-addr string Address or interface to use for data path traffic (format: <ip|interface>)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Use `Contains` instead of `Include`
- Use `ToJSON` instead of `ToParam`
- Remove usage of `ParseFlag` as it is deprecated too
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Even though those fields are not supported by `docker stack deploy`
they are defined in versions `3.x` of compose schema, so the `compose`
package should be able to marshal/unmarshal them.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Clarified ambiguous error message
Update kubernetes/cli.go
Infromed user of why the error was caused when file is not there
Signed-off-by: Justyn Temme <justyntemme@gmail.com>
- remove some hints that are no longer needed
- added a nolint: unparam for removeSingleSigner() (return bool is only used in tests)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
in swarm.
Also, fix some CLI command confusions:
1. If the --external-ca flag is provided, require a --ca-cert flag as well, otherwise
the external CA is set but the CA certificate is actually rotated to an internal
cert
2. If a --ca-cert flag is provided, require a --ca-key or --external-ca flag be
provided as well, otherwise either the server will say that the request is
invalid, or if there was previously an external CA corresponding to the cert, it
will succeed. While that works, it's better to require the user to explicitly
set all the parameters of the new desired root CA.
This also changes the `swarm update` function to set the external CA's CACert field,
which while not strictly necessary, makes the CA list more explicit.
Signed-off-by: Ying Li <ying.li@docker.com>
'CheckInitialized' in the credential-helper library actually invokes
`pass`, which isn't desirable (see #699).
This moves the check to be simpler, and then pass will only be invoked
when it's needed (such as for `docker login` or when pulling from a
private registry).
This logic could also reasonably live in the credential-helper library,
but it's simple enough it seems fine in either location.
Signed-off-by: Euan Kemp <euank@euank.com>
Stores complete OCI descriptor instead of digest and platform
fields. This includes the size which was getting lost by not
storing the original manifest bytes.
Attempt to support existing cached files, if not output
the filename with the incorrect content.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
It makes it easier to get the correct stack from a compose config
struct without requiring the client (and thus talking to k8s API)
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Handle `bundlefile` directly in the `top-level`
command. `bundlefile` is still experimental and will be deprecated
in future version — this should make be easier to remove it.
- Validate the `stack` name in all cases (i.e. whatever the
orchestrator is used)
- Load the composefile ahead of choosing the orchestrator. This
removes some slight duplication.
- Makes `RunDeploy` easier to use from outside packages (like
`docker/app`) with a preloaded configuration.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Add the possibility to skip interpolation
- Add the possibility to skip schema validation
- Allow customizing the substitution function, to add special cases.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
> Run an init inside the container that forwards signals and reaps
processes
This is supported on `run` and now on Swarm services too, so it's also
possible to have in on a composefile :).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
That field is automaticaly populated with any `x-*` field in the yaml.
And marshalling the compose config struct put them back into place.
This make it possible to get those extra fields without re-inventing
the wheel (i.e. reimplementing 80% of the `cli/compose/*` packages.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The output of this information can be confusing,
so removing until we have a better design for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Renaming DOCKER_ORCHESTRATOR to DOCKER_STACK_ORCHESTRATOR
* Renaming config file option "orchestrator" to "stackOrchestrator"
* "--orchestrator" flag is no more global but local to stack command and subcommands
* Cleaning all global orchestrator code
* Replicating Hidden flags in help and Supported flags from root command to stack command
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
Elliot Luo
Silvin Lubecki
Nick Adcock
Akihiro Suda
Ryan Zhang
Sebastiaan van Stijn
Ian Campbell
Sebastiaan van Stijn
Olli Janatuinen
Ulysses Souza
Lifubang
Tibor Vass
Philipp Schmied
Vincent Demeester
John Howard
Tonis Tiigi
Simon Ferquel
Silvin Lubecki
François Scala
JoeWrightss
Daniel Hiltgen
Jérémie Drouet
Tibor Vass
Aleksa Sarai
selansen
Brian Goff
Kir Kolyshkin
Li Yi
Mindaugas Rukas
Andrew Hsu
Michael Crosby
Christy Norman
Arash Deshmeh
Benoit Sigoure
Joffrey F
Xiaodong Zhang
Lihua Tang
Harald Albers
Anda Xu
mmacy
Vincent Demeester
Justyn Temme
Vimal Raghubir
Sami Tabet
Ying Li
Euan Kemp
Derek McGowan
Eli Uriegas