make shell
make -C ./internal/gocompat/
GO111MODULE=on go test -v
# github.com/docker/cli/cli/command/container
../../cli/command/container/completion.go:37:28: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
../../cli/command/container/completion.go:82:25: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
../../cli/command/container/completion.go:92:27: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
FAIL gocompat [build failed]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 4a7b04d412 configured golangci-lint
to use go1.23 semantics, which enabled the copyloopvar linter.
go1.22 now creates a copy of variables when assigned in a loop; make sure we
don't have files that may downgrade semantics to go1.21 in case that also means
disabling that feature; https://go.dev/ref/spec#Go_1.22
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.22 and up now produce a unique variable in loops, tehrefore no longer
requiring to capture the variable manually;
cli/command/container/opts.go:765:3: The copy of the 'for' variable "n" can be deleted (Go 1.22+) (copyloopvar)
n := n
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.22 and up now produce a unique variable in loops, tehrefore no longer
requiring to capture the variable manually;
service/logs/parse_logs_test.go:50:3: The copy of the 'for' variable "tc" can be deleted (Go 1.22+) (copyloopvar)
tc := tc
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change reduces the flickering of the terminal when
running `docker stats` by buffering the formatted stats
text and printing it in one write.
Should also consume less CPU as we now only have to issue
a single syscall to write the stats text to the terminal.
Signed-off-by: Giedrius Jonikas <giedriusj1@gmail.com>
remove a client-side warning about volume drivers combined with "mounts"
in favor of producing the warning on the daemon side.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent some tests from failing when running from a pre-compiled
testbinary, and discard output to make the output less noisy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch, completion is provided for `--platform` flags:
docker run --platform<TAB>
linux linux/amd64 linux/arm/v5 linux/arm/v7 linux/arm64/v8 linux/riscv64 wasip1 windows
linux/386 linux/arm linux/arm/v6 linux/arm64 linux/ppc64le linux/s390x wasip1/wasm windows/amd64
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit adds tests for the commands
docker kill, docker commit, and docker
pause. Also, it creates the mock methods
of the docker client ContainerCommit and
ContainerPause so they can
be used in the tests.
For docker kill, it covers the
cases that:
- the command runs successfully
- the client returns an error
For docker commit, it covers
the cases that:
- the command runs successfully
- the client returns an error
For docker pause, it covers
the cases that:
- the command runs successfully
- the client returns an error
Signed-off-by: Stavros Panakakis <stavrospanakakis@gmail.com>
Move the code for parsing key-value files, such as used for
env-files and label-files to a separate package. This allows
other projects (such as compose) to use the same parsing
logic, but provide custom lookup functions for their situation
(which is slightly different).
The new package provides utilities for parsing key-value files
for either a file or an io.Reader. Most tests for EnvFile were
now testing functionality that's already tested in the new package,
so were (re)moved.
Co-authored-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We used a hard-coded list of capabilities that we copied from containerd,
but the new "capability" package allows use to have a maintained list
of capabilities.
There's likely still some improvements to be made;
First of all, the capability package could provide a function to get the list
of strings.
On the completion-side, we need to consider what format is most convenient;
currently we use the canonical name (uppercase and "CAP_" prefix), however,
tab-completion is case-sensitive by default, so requires the user to type
uppercase letters to filter the list of options.
Bash completion provides a `completion-ignore-case on` option to make completion
case-insensitive (https://askubuntu.com/a/87066), but it looks to be a global
option; the current cobra.CompletionOptions also don't provide this as an option
to be used in the generated completion-script.
Fish completion has `smartcase` (by default?) which matches any case if
all of the input is lowercase.
Zsh does not have a dedicated option, but allows setting matching-rules
(see https://superuser.com/a/1092328).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This renames the `--time` flag as used on `docker stop` and `docker restart`
to `--timeout`, bringing it in line with other uses for this property,
such as `--stop-timeout` on `docker run`.
The `--time` option is deprecated and hidden, but will be kept for
backward compatibility, as these options existed for a long time.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit adds tests for the commands
docker diff and docker rename. Also,
it creates the mock methods of the
docker client ContainerDiff and
ContainerRename so they can
be used in the tests.
For docker diff, it covers the
cases that:
- the command runs successfully
- the client returns an error
- the container id is empty
For docker rename, it covers
the cases that:
- the command runs successfully
- the container old name is empty
- the container new name is empty
- the client returns an error
Co-authored-by: Laura Brehm <laurabrehm@hey.com>
Signed-off-by: Stavros Panakakis <stavrospanakakis@gmail.com>
This test was just incorrect (and testing incorrect
behavior): it was checking that `docker run` exited with a `context
canceled` error after signalling the CLI/cancelling the command's
context, but this was incorrect (and was fixed in
991b1303da - which was when this test
started failing).
However, since this test assertion was happening inside of a goroutine,
it would sometimes pass if this assertion didn't get to run before the
test suite terminated. It was flaky because sometimes this assertion
inside the goroutine did get to execute, but after the test finished
execution, which is a big no-no.
As an aside, assertions inside goroutines are generally bad, and `govet`
even has a linter for this (but it only catches `t.Fatal` and `t.FailNow`
calls and not `assert.Xx`.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Such as with `docker run`, if a user CTRL-Cs while attached to a
container, we should forward the signal and wait for the exit from
`ContainerWait`, instead of just returning.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
In 3f0d90a2a9 we introduced a global
signal handler and made sure all the contexts passed into command
execution get (appropriately) cancelled when we get a SIGINT.
Due to that change, and how we use this context during `docker attach`,
we started to return the context cancelation error when a user signals
the running `docker attach`.
Since this is the intended behavior, we shouldn't return an error, so
this commit adds checks to ignore this specific error in this case.
Also adds a regression test.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
The `reportError` utility was present because cli.StatusError would print
the error decorated with `Status: <error-message>, Code: <exit-code>`.
That was not desirable in many cases as it would mess-up the output. To
prevent this, the CLI had code to check for an empty `Status` (error message)
in which case the error would be "ignored" (and only used for the exit-status),
and the `reportError` utility would be used to manually print a custom error
message before returning the error.
Now that bca2090061 fixed the output format
of `cli.StatusError`, and 3dd6fc365d and
350a0b68a9 no longer discard these error,
we can get rid of this utility, and just set the error-message for
the status-error.
This patch:
- Introduces a `withHelp` which takes care of decorating errors with
a "Run --help" hint for the user.
- Introduces a `toStatusError` utility that detects certain errors in
the container to assign a corresponding exit-code (these error-codes
can be used to distinguish "client" errors from "container" errors).
- Removes the `reportError` utility, and removes code that manually
printed errors before returning.
Behavior is mostly unmodified, with the exception of some slight reformatting
of the errors:
- `withHelp` adds a `docker:` prefix to the error, to indicate the error
is produced by the `docker` command. This prefix was already present
in most cases.
- The "--help" hint is slightly updated ("Run 'docker run --help' for
more information" instead of "See 'docker run --help'"), to make it
more clear that it's a "call to action".
- An empty is added before the "--help" hint to separate it better from
the error-message.
Before this patch:
$ docker run --pull=invalid-option alpine
docker: invalid pull option: 'invalid-option': must be one of "always", "missing" or "never".
See 'docker run --help'.
$ echo $?
125
$ docker run --rm alpine nosuchcommand
docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: exec: "nosuchcommand": executable file not found in $PATH: unknown.
$ echo $?
127
With this patch:
$ docker run --pull=invalid-option alpine
docker: invalid pull option: 'invalid-option': must be one of "always", "missing" or "never"
Run 'docker run --help' for more information
$ echo $?
125
$ docker run --rm alpine nosuchcommand
docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: exec: "nosuchcommand": executable file not found in $PATH: unknown.
Run 'docker run --help' for more information
$ echo $?
127
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch:
docker run --volumes-from amazing_nobel
amazing_cannon boring_wozniak determined_banzai
elegant_solomon reverent_booth amazing_nobel
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"docker run" and "docker create" are mostly identical, so we can copy
the same completion functions,
We could possibly create a utility for this (similar to `addFlags()` which
configures both commands with the flags they share). I considered combining
his with `addFlags()`, but that utility is also used in various tests, in
which we don't need this feature, so keeping that for a future exercise.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's an alias for cobra.FixedCompletions but takes a variadic list
of strings, so that it's not needed to construct an array for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
EnvVarNames offers completion for environment-variable names. This
completion can be used for "--env" and "--build-arg" flags, which
allow obtaining the value of the given environment-variable if present
in the local environment, so we only should complete the names of the
environment variables, and not their value. This also prevents the
completion script from printing values of environment variables
containing sensitive values.
For example;
export MY_VAR=hello
docker run --rm --env MY_VAR alpine printenv MY_VAR
hello
Before this patch:
docker run --env GO
GO111MODULE=auto GOLANG_VERSION=1.21.12 GOPATH=/go GOTOOLCHAIN=local
With this patch:
docker run --env GO<tab>
GO111MODULE GOLANG_VERSION GOPATH GOTOOLCHAIN
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is just a convenience function to allow defining completion to
use the default (complete with filenames and directories).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Harald Albers
Giedrius Jonikas
Stavros Panakakis
Nicolas De Loof
Laura Brehm