The Errors type was deprecated in d3bafa5f3e,
which has been included in the 27.4.0 release.
This patch removes the type, as there are no external consumers.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The format had a stray colon and space included. While fixing that, also
updating the error message to clarify the error happened while parsing
the file (not so much "loading" it).
Before:
WARNING: Error loading config file: /root/.docker/config.json: : json: cannot unmarshal bool into Go struct field ConfigFile.features of type string
After:
WARNING: Error parsing config file (/root/.docker/config.json): json: cannot unmarshal bool into Go struct field ConfigFile.features of type string
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, the config-file was always updated, even if there
were no changes to save. This could cause issues when the config-file
already had credentials set and was read-only for the current user.
For example, on NixOS, this poses a problem because `config.json` is a
symlink to a write-protected file;
$ readlink ~/.docker/config.json
/home/username/.config/sops-nix/secrets/ghcr_auth
$ readlink -f ~/.docker/config.json
/run/user/1000/secrets.d/28/ghcr_auth
Which causes `docker login` to fail, even if no changes were to be made;
Error saving credentials: rename /home/derek/.docker/config.json2180380217 /home/username/.config/sops-nix/secrets/ghcr_auth: invalid cross-device link
This patch updates the code to only update the config file if changes
were detected. It there's nothing to save, it skips updating the file,
as well as skips printing the warning about credentials being stored
insecurely.
With this patch applied:
$ docker login -u yourname
Password:
WARNING! Your credentials are stored unencrypted in '/root/.docker/config.json'.
Configure a credential helper to remove this warning. See
https://docs.docker.com/go/credential-store/
Login Succeeded
$ docker login -u yourname
Password:
Login Succeeded
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This message resulted in code-lines that were too long; move it to a
const together with the other hint. While at it, also suppress unhandled
error, and touch-up the code-comment.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Deprecation comments must have an empty line before them, otherwise tools
and linters may not recognise them. While fixing this, also updated the
reference to PromptUserForCredentials to be a docs-link to make it clickable.
Updates 6e4818e7d6.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If restoring the terminal state fails, "echo" no longer works, which means
that anything the user types is no longer shown. The login itself may already
have succeeded, so we should not fail the command, but it's good to inform
the user that this happened, which may give them a clue why things no longer
work as they expect them to work.
With this patch:
docker login -u yourname
Password:
Error: failed to restore terminal state to echo input: something bad happened
Login Succeeded
We should consider printing instructions how to restore this manually (other
than restarting the shell). e.g., 'run stty echo' when in a Linux or macOS shell,
but PowerShell and CMD.exe may need different instructions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
we don't support empty passwords; when prompting the user for a password,
we already trim the result, but we didn't do the same for a password that's
passed through stdin or through the `-p` / `--password` flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- move trimming defaultUsername inside the if-branch, as it's the only
location where the result of the trimmed username is use.
- do the reverse for trimming argUser, because the result of trimming
argUser is used outside of the if-branch (not just for the condition).
putting it inside the condition makes it easy to assume the result is
only used locally.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
move the "post" check for username being empty inside the branch
that's handling the username, as it's the only branch where username
is mutated after checking if it's empty.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
remove isDefaultRegistry and inline it where it's used; the code-comment
already outlines what we're looking for, so the intermediate var didn't
add much currently.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function has multiple conditional branches, which makes it harder
to see at a glance whether authConfig may be partially populated. This
patch instead returns a fresh instance for error returns to prevent any
confusion.
It also removes the named output variables, as they're now no longer used,
and the returned types should already be descriptive enough to understand
what's returned.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Errors type is no longer used by the CLI itself, and this custom
"multi-error" implementation had both limitations (empty list not being
`nil`), as well as formatting not being great. All of this making it not
something to recommend, and better handled with Go's stdlib.
As far as I could find, there's no external consumers of this, but let's
deprecate first, and remove in the next release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This command was using a custom "multi-error" implementation, but it
had some limitations, and the formatting wasn't great.
This patch replaces it with Go's errors.Join.
Before:
docker plugin remove one two three
Error response from daemon: plugin "one" not found, Error response from daemon: plugin "two" not found, Error response from daemon: plugin "three" not found
After:
docker plugin remove one two three
Error response from daemon: plugin "one" not found
Error response from daemon: plugin "two" not found
Error response from daemon: plugin "three" not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent some tests from failing when running from a pre-compiled
testbinary, and discard output to make the output less noisy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit implements a validation
method for the port mappings.
Also, it removes the ports validation
method from the expose property
since they do not accept the
same type of values.
Signed-off-by: Stavros Panakakis <stavrospanakakis@gmail.com>
When running tests from my IDE, it compiles the tests before running,
then executes the compiled binary to run the tests. Cobra doesn't like that,
because in that situation os.Args is taken as argument for the command that's
executed. The command that's tested now sees the `test-` flags as arguments
(`-test.v -test.run ..`), which causes various tests to fail ("Command XYZ
does not accept arguments").
# compile the tests:
go test -c -o foo.test
# execute the test:
./foo.test -test.v -test.run TestFoo
=== RUN TestFoo
Error: "foo" accepts no arguments.
Set arguments to an empty slice to make sure it doesn't inherit arguments
from the test-binary.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in [moby@b2551c6] as part of a larger PR that implemented
unit tests in various packages. In this specific test, it looks like the
`imageSaveFunc` that's defined in the test-table was forgotten to be wired
up, causing all tests to effectively be skipped.
This patch wires up the function so that it's used in the test.
[moby@b2551c6]: b2551c619d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch, completion is provided for `--platform` flags:
docker pull --platform<TAB>
linux linux/amd64 linux/arm/v5 linux/arm/v7 linux/arm64/v8 linux/riscv64 wasip1 windows
linux/386 linux/arm linux/arm/v6 linux/arm64 linux/ppc64le linux/s390x wasip1/wasm windows/amd64
Note that `docker buildx build` (with BuildKit) does not yet provide completion;
it's provided through buildx, and uses a different format (accepting multiple
comma-separated platforms). Interestingly, tab-completion for `docker build`
currently uses completion for non-buildkit, and has some other issues that may
have to be looked into.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch, completion is provided for `--platform` flags:
docker run --platform<TAB>
linux linux/amd64 linux/arm/v5 linux/arm/v7 linux/arm64/v8 linux/riscv64 wasip1 windows
linux/386 linux/arm linux/arm/v6 linux/arm64 linux/ppc64le linux/s390x wasip1/wasm windows/amd64
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a utility for completing platform strings.
Platforms offers completion for platform-strings. It provides a non-exhaustive
list of platforms to be used for completion. Platform-strings are based on
[runtime.GOOS] and [runtime.GOARCH], but with (optional) variants added. A
list of recognised os/arch combinations from the Go runtime can be obtained
through "go tool dist list".
Some noteworthy exclusions from this list:
- arm64 images ("windows/arm64", "windows/arm64/v8") do not yet exist for windows.
- we don't (yet) include `os-variant` for completion (as can be used for Windows images)
- we don't (yet) include platforms for which we don't build binaries, such as
BSD platforms (freebsd, netbsd, openbsd), android, macOS (darwin).
- we currently exclude architectures that may have unofficial builds,
but don't have wide adoption (and no support), such as loong64, mipsXXX,
ppc64 (non-le) to prevent confusion.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit adds tests for the commands
docker kill, docker commit, and docker
pause. Also, it creates the mock methods
of the docker client ContainerCommit and
ContainerPause so they can
be used in the tests.
For docker kill, it covers the
cases that:
- the command runs successfully
- the client returns an error
For docker commit, it covers
the cases that:
- the command runs successfully
- the client returns an error
For docker pause, it covers
the cases that:
- the command runs successfully
- the client returns an error
Signed-off-by: Stavros Panakakis <stavrospanakakis@gmail.com>
Move the code for parsing key-value files, such as used for
env-files and label-files to a separate package. This allows
other projects (such as compose) to use the same parsing
logic, but provide custom lookup functions for their situation
(which is slightly different).
The new package provides utilities for parsing key-value files
for either a file or an io.Reader. Most tests for EnvFile were
now testing functionality that's already tested in the new package,
so were (re)moved.
Co-authored-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We used a hard-coded list of capabilities that we copied from containerd,
but the new "capability" package allows use to have a maintained list
of capabilities.
There's likely still some improvements to be made;
First of all, the capability package could provide a function to get the list
of strings.
On the completion-side, we need to consider what format is most convenient;
currently we use the canonical name (uppercase and "CAP_" prefix), however,
tab-completion is case-sensitive by default, so requires the user to type
uppercase letters to filter the list of options.
Bash completion provides a `completion-ignore-case on` option to make completion
case-insensitive (https://askubuntu.com/a/87066), but it looks to be a global
option; the current cobra.CompletionOptions also don't provide this as an option
to be used in the generated completion-script.
Fish completion has `smartcase` (by default?) which matches any case if
all of the input is lowercase.
Zsh does not have a dedicated option, but allows setting matching-rules
(see https://superuser.com/a/1092328).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Laura Brehm
Paweł Gronowski
Harald Albers
Stavros Panakakis
Nicolas De Loof