This is a new option added specifically to allow for debugging of bugs
in Docker's storage drivers or libdm itself.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2b8f0eef7338f37104464154ba65aef7db3b9703)
Signed-off-by: Tibor Vass <tibor@docker.com>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Quite a few changes, as it seems like previous wrapping was done
manually, so it's all over the place.
As noted in #28424
Signed-off-by: Jonathan Boulle <jonathanboulle@gmail.com>
This fix tries to add a daemon config parameter `--shutdown-timeout`
that specifies the timeout value to stop containers gracefully
(before SIGKILL). The default value is 15s.
The `--shutdown-timeout` parameter is added to daemon options and
config file. It will also be updated during daemon reload.
Additional test cases have been added to cover the change.
This fix fixes#22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This option was added through commit
0d03c060c7e6800e60833c4462b917ee9b081440,
but didn't update the man page.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds a small C binary for fighting zombies. It is mounted under
`/dev/init` and is prepended to the args specified by the user. You
enable it via a daemon flag, `dockerd --init`, as it is disable by
default for backwards compat.
You can also override the daemon option or specify this on a per
container basis with `docker run --init=true|false`.
You can test this by running a process like this as the pid 1 in a
container and see the extra zombie that appears in the container as it
is running.
```c
int main(int argc, char ** argv) {
pid_t pid = fork();
if (pid == 0) {
pid = fork();
if (pid == 0) {
exit(0);
}
sleep(3);
exit(0);
}
printf("got pid %d and exited\n", pid);
sleep(20);
}
```
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Remove checks that prevent overlay and SELinux from working together.
Fixes are arriving in the 4.9 kernel.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Hostnames are not supported for now because libnetwork can't use them
for overlay networking yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This flags enables full support of daemonless containers in docker. It
ensures that docker does not stop containers on shutdown or restore and
properly reconnects to the container when restarted.
This is not the default because of backwards compat but should be the
desired outcome for people running containers in prod.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This fix tries to address issues raised in #20936 and #22443
where `docker pull` or `docker push` fails because of the
concurrent connection failing.
Currently, the number of maximum concurrent connections is
controlled by `maxDownloadConcurrency` and `maxUploadConcurrency`
which are hardcoded to 3 and 5 respectively. Therefore, in
situations where network connections don't support multiple
downloads/uploads, failures may encounter for `docker push`
or `docker pull`.
This fix tries changes `maxDownloadConcurrency` and
`maxUploadConcurrency` to adjustable by passing
`--max-concurrent-uploads` and `--max-concurrent-downloads` to
`docker daemon` command.
The documentation related to docker daemon has been updated.
Additional test case have been added to cover the changes in this fix.
This fix fixes#20936. This fix fixes#22443.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Aleksa Sarai
Sebastiaan van Stijn
Noah Treuhaft
Brian Goff
David Sheets
Josh Hawn
Aaron.L.Xu
Yong Tang
yuexiao-wang
Zhang Wei
Ben Firshman
Jonathan Boulle
bbayani
Antonio Murdaca
Kenfe-Mickael Laventure
Michael Crosby
Dan Walsh
Aaron Lehmann
Derek McGowan
John Howard
Zhu Guihua
Wen Cheng Ma