The `docker create` command shares most (all) of its options with `docker run`,
which uses `docker create` under the hood. The `docker create` reference docs
already referred users to the `docker run` sections for details, but some
flags were only documented on the `docker create` page.
This patch:
- moves those flags from the `docker create` to the `docker run` page
- does some minor rephrasing and touch-ups.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These options were added in 22cd418967,
but did not update the documentation.
Signed-off-by: Chee Hau Lim <cheehau.lim@mobimeo.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Explicitly mention flags and environment variables that were removed, to
make the deprecation more discoverable.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove mentions of which options are supported by Kubernetes.
Note that there's some filters remaining that were marked as "not supported
by swarm": those filters need to be checked if this is accurate (and if so,
those filters must be removed).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removes the flags that have been deprecated or removed;
- --default-stack-orchestrator
- --kubernetes
- --kubeconfig
- --namespace
- --orchestrator
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I didn't see where in the page that `--privileged` mode adds all capabilities.
I think this page once did contain that information. I got it from a Stack Overflow answer that seems to have copied from an earlier version of this same document.
> Full container capabilities (--privileged)
>
> The --privileged flag gives all capabilities to the container, and it also lifts all the limitations enforced by the device cgroup controller. In other words, the container can then do almost everything that the host can do. This flag exists to allow special use-cases, like running Docker within Docker.
https://stackoverflow.com/a/36441605/111424
Signed-off-by: Iain Samuel McLean Elder <iain@isme.es>
- expand a bit on what's happening
- clarify start of deprecation of the classic builder
- show examples of error and warning
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
> Legacy PEM encryption as specified in RFC 1423 is insecure by design. Since
> it does not authenticate the ciphertext, it is vulnerable to padding oracle
> attacks that can let an attacker recover the plaintext
From https://go-review.googlesource.com/c/go/+/264159
> It's unfortunate that we don't implement PKCS#8 encryption so we can't
> recommend an alternative but PEM encryption is so broken that it's worth
> deprecating outright.
This feature allowed using an encrypted private key with a supplied password,
but did not provide additional security as the encryption is known to be broken,
and the key is sitting next to the password in the filesystem. Users are recommended
to decrypt the private key, and store it un-encrypted to continue using it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Change the order of received/written and sent/read in NET I/O and BLOCK I/O description reflect the order in I/O (Input/Output).
From example above:
CONTAINER NAME: awesome_brattain
BLOCK I/O: 147kB / 0B
awesome_brattain has written 147kB and read 0B
Signed-off-by: Tomas Bäckman <larstomas@gmail.com>
Ubuntu version references were a mixture of 14.04 (in descriptions) and 20.04 (in example code). Updated description references to 20.04 to match example code.
Signed-off-by: Mike Dalton <mikedalton@github.com>
Commit 9bd3a7c029
(docker 17.04 and up) added a maximum timeout of 1 minute to the
restart timeout.
This patch updates the documentation to match the current behavior.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The DefaultStopSignal const has been deprecated, because the daemon already
handles a default value. The current code did not actually send the default
value unless the flag was set, which also made the flag description incorrect,
because in that case, the _daemon's_ default would be used, which could
potentially be different as was specified here.
This patch removes the default value from the flag, leaving it to the daemon
to set a default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The /go/ redirects are now defined in the docs repository, so the one
we defined here can be removed.
Also adds a missing redirect for an old URL to the main CLI page.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This replaces the use of bash where suitable, to allow easier copy/pasting
of shell examples without copying the prompt or process output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- make sure the target directory is created if missing
- add support for custom ID's in headings through `<a>` tags (e.g.
`<a name=heading2></a>`). This allows use of custom anchors that
work both on GitHub (GFM doesn't support extended MarkDown), and
in Jekyll (which does).
- add code to cleanup markdown for use in our docs:
- remove absolute URLs to https://docs.docker.com
- remove tabs in MarkDown, and convert them to 4 spaces. This
prevents the YAML conversion from switching between "short"
and "long" syntax. Tabs in code examples also don't always
work well, so using spaces doesn't hurt for that.
- refactor some code for readability, and to be less "hacky" (still
lots to be improved though)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
> Legacy PEM encryption as specified in RFC 1423 is insecure by design. Since
> it does not authenticate the ciphertext, it is vulnerable to padding oracle
> attacks that can let an attacker recover the plaintext
From https://go-review.googlesource.com/c/go/+/264159
> It's unfortunate that we don't implement PKCS#8 encryption so we can't
> recommend an alternative but PEM encryption is so broken that it's worth
> deprecating outright.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for ALL_PROXY as default build-arg was added recently in
buildkit and the classic builder.
This patch adds the `ALL_PROXY` environment variable to the list of
configurable proxy variables, and updates the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This link worked on GitHub, but was broken on docs.docker.com, so
replacing with a regular link directly to the docs instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Jekyll doesn't work well with markdown links that are wrapped, so changing
the link to be on a single line.
While at it, also added/changed some code-hints.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
More improvements can be made, but this makes a start on cleaning up
this page:
- Reorganise configuration file options into sections
- Use tables for related options to make them easier to find
- Add warning about the config file's possibility to contain sensitive information
- Some MarkDown touch-ups (use "console" code-hint to assist copy/paste)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is mostly a copy of the equivalent `docker secret` commands,
which uses the same mechanisms behind the hood (hence, are 90% the
same).
We can make further refinements to these docs, but this gives us
a starting point.
Adding these documents, because there were some links pointing to
these pages in the docs, but there was no markdown file to link to
on GitHub.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- rename "experimental" to "labs"
- rephrase recommendation for picking a version
- clarify that the "labs" channel provides a superset of the "stable" channel.
- remove "External implementation features" section, because it overlapped
with the "syntax" section.
- removed `:latest` from the "stable" channel (generally not recommended)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- update some examples to show the BuildKit output
- remove some wording about "images" being used for the build cache
- add a link to the `--cache-from` section
- added a link to "scanning your image with `docker scan`"
- updated link to "push your image"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use "console" for code-hints, to make process output distinguishable
from the commands that are executed
- use a consistent prompt for powershell examples
- minor changes in wording around "build context" to reduce confusion
with `docker context`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These options are available in Docker 20.10 and up, but were
previously only available in Docker EE, and not documented.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Updates the stop.md doc to mention that the stop signal can be changed, either with the Dockerfile or via `docker run --stop-signal`. This is a real gotcha if you're not familiar with this feature and build a container that extends a container that uses `STOPSIGNAL`.
Signed-off-by: Christopher Vermilion <christopher.vermilion@gmail.com>
recommend using `docker container prune`, but show an example on
how to combine commands with a bit more context and warnings
about portability/compatibility.
Thanks to Charlie Arehart to do the initial work on this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some new drivers were added to the "docker run" section to make the documentation more up to date.
Signed-off-by: d.alvarez <david.alvarez@flyeralarm.com>
Sebastiaan van Stijn
Chee Hau Lim
CrazyMax
Nicolas De Loof
Iain Samuel McLean Elder
Sebastiaan van Stijn
Leonid Skorospelov
Zeel B Patel
Sandro
Pieter E Smit
Andres G. Aragoneses
jlecordier
Tomas Bäckman
Mike Dalton
Peter Dave Hello
Dmitriy Fishman
takeshi.koenuma
Brian Goff
Pawel
Silvin Lubecki
Gsealy
Brad Baker
Ivan Grund
Mathieu Champlon
Takuya Noguchi
Anca Iordache
Govind Rai
Metal
Erik Humphrey
Tianon Gravi
Chris Vermilion
OKA Naoya
Jon Zeolla
Busindre
DongGeon Lee