Added --detach and --quiet/-q flags to stack deploy. Setting --detach=false
waits until all of the stack services have converged. Shows progress bars for
each individual task, unless --quiet/-q is specified.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: George Margaritis <gmargaritis@protonmail.com>
Both these functions took the whole DockerCLI as argument, but only needed
the ConfigFile. ResolveAuthConfig also had an unused context.Context as
argument.
This patch updates both functions to accept a ConfigFile, and removes the
unused context.Context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go do not format these comments, so we can already
reformat them ahead of time to prevent gofmt linting failing once
we update to Go 1.19 or up.
Result of:
gofmt -s -w $(find . -type f -name '*.go' | grep -v "/vendor/")
With some manual adjusting.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: 616e8db4c3...6068d1894d
a replace rule was needed (similar as in github.com/docker/docker) to fix some
dependency issues;
github.com/docker/cli/cli/trust imports
github.com/theupdateframework/notary/trustpinning tested by
github.com/theupdateframework/notary/trustpinning.test imports
github.com/cloudflare/cfssl/helpers imports
github.com/google/certificate-transparency-go imports
go.etcd.io/etcd/v3 imports
go.etcd.io/etcd/tests/v3/integration imports
go.etcd.io/etcd/server/v3/embed imports
go.opentelemetry.io/otel/semconv: module go.opentelemetry.io/otel@latest found (v1.7.0), but does not contain package go.opentelemetry.io/otel/semconv
github.com/docker/cli/cli/trust imports
github.com/theupdateframework/notary/trustpinning tested by
github.com/theupdateframework/notary/trustpinning.test imports
github.com/cloudflare/cfssl/helpers imports
github.com/google/certificate-transparency-go imports
go.etcd.io/etcd/v3 imports
go.etcd.io/etcd/tests/v3/integration imports
go.etcd.io/etcd/server/v3/embed imports
go.opentelemetry.io/otel/exporters/otlp imports
go.opentelemetry.io/otel/sdk/metric/controller/basic imports
go.opentelemetry.io/otel/metric/registry: module go.opentelemetry.io/otel/metric@latest found (v0.30.0), but does not contain package go.opentelemetry.io/otel/metric/registry
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This implements a special "RESET" value that can be used to reset the
list of capabilities to add/drop when updating a service.
Given the following service;
| CapDrop | CapAdd |
| -------------- | ------------- |
| CAP_SOME_CAP | |
When updating the service, and applying `--cap-drop RESET`, the "drop" list
is reset to its default:
| CapDrop | CapAdd |
| -------------- | ------------- |
| | |
When updating the service, and applying `--cap-drop RESET`, combined with
`--cap-add CAP_SOME_CAP` and `--cap-drop CAP_SOME_OTHER_CAP`:
| CapDrop | CapAdd |
| -------------- | ------------- |
| CAP_FOO_CAP | CAP_SOME_CAP |
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adding/removing capabilities when updating a service is considered a tri-state;
- if the capability was previously "dropped", then remove it from "CapabilityDrop",
but do NOT add it to "CapabilityAdd". However, if the capability was not yet in
the service's "CapabilityDrop", then simply add it to the service's "CapabilityAdd"
- likewise, if the capability was previously "added", then remove it from
"CapabilityAdd", but do NOT add it to "CapabilityDrop". If the capability was
not yet in the service's "CapabilityAdd", then simply add it to the service's
"CapabilityDrop".
In other words, given a service with the following:
| CapDrop | CapAdd |
| -------------- | ------------- |
| CAP_SOME_CAP | |
When updating the service, and applying `--cap-add CAP_SOME_CAP`, the previously
dropped capability is removed:
| CapDrop | CapAdd |
| -------------- | ------------- |
| | |
When updating the service a second time, applying `--cap-add CAP_SOME_CAP`,
capability is now added:
| CapDrop | CapAdd |
| -------------- | ------------- |
| | CAP_SOME_CAP |
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When creating and updating services, we need to avoid unneeded service churn.
The interaction of separate lists to "add" and "drop" capabilities, a special
("ALL") capability, as well as a "relaxed" format for accepted capabilities
(case-insensitive, `CAP_` prefix optional) make this rather involved.
This patch updates how we handle `--cap-add` / `--cap-drop` when _creating_ as
well as _updating_, with the following rules/assumptions applied:
- both existing (service spec) and new (values passed through flags or in
the compose-file) are normalized and de-duplicated before use.
- the special "ALL" capability is equivalent to "all capabilities" and taken
into account when normalizing capabilities. Combining "ALL" capabilities
and other capabilities is therefore equivalent to just specifying "ALL".
- adding capabilities takes precedence over dropping, which means that if
a capability is both set to be "dropped" and to be "added", it is removed
from the list to "drop".
- the final lists should be sorted and normalized to reduce service churn
- no validation of capabilities is handled by the client. Validation is
delegated to the daemon/server.
When deploying a service using a docker-compose file, the docker-compose file
is *mostly* handled as being "declarative". However, many of the issues outlined
above also apply to compose-files, so similar handling is applied to compose
files as well to prevent service churn.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Combining `-add` and `-rm` flags on `docker service update` should
be usable to explicitly replace existing options. The current order
of processing did not allow this, causing the `-rm` flag to remove
properties that were specified in `-add`. This behavior was inconsistent
with (for example) `--host-add` and `--host-rm`.
This patch updates the behavior to first remove properties, then
add new properties.
Note that there's still some improvements to make, to make the removal
more granulas (e.g. to make `--label-rm label=some-value` only remove
the label if value matches `some-value`); these changes are left for
a follow-up.
Before this change:
-----------------------------
Create a service with two env-vars
```bash
docker service create --env FOO=bar --env BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"FOO=bar",
"BAR=baz"
]
```
Update the service, with the intent to replace the value of `FOO` for a new value
```bash
docker service update --env-rm FOO --env-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"BAR=baz"
]
```
Create a service with two labels
```bash
docker service create --label FOO=bar --label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, with the intent to replace the value of `FOO` for a new value
```bash
docker service update --label-rm FOO --label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz"
}
```
Create a service with two container labels
```bash
docker service create --container-label FOO=bar --container-label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, with the intent to replace the value of `FOO` for a new value
```bash
docker service update --container-label-rm FOO --container-label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
}
```
With this patch applied:
--------------------------------
Create a service with two env-vars
```bash
docker service create --env FOO=bar --env BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"FOO=bar",
"BAR=baz"
]
```
Update the service, and replace the value of `FOO` for a new value
```bash
docker service update --env-rm FOO --env-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Env }}' test | jq .
[
"BAR=baz",
"FOO=updated-foo"
]
```
Create a service with two labels
```bash
docker service create --label FOO=bar --label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, and replace the value of `FOO` for a new value
```bash
docker service update --label-rm FOO --label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "updated-foo"
}
```
Create a service with two container labels
```bash
docker service create --container-label FOO=bar --container-label BAR=baz --name=test nginx:alpine
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "bar"
}
```
Update the service, and replace the value of `FOO` for a new value
```bash
docker service update --container-label-rm FOO --container-label-add FOO=updated-foo test
docker service inspect --format '{{json .Spec.TaskTemplate.ContainerSpec.Labels }}' test | jq .
{
"BAR": "baz",
"FOO": "updated-foo"
}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Comments should have a leading space unless the comment is
for special purposes (go:generate, nolint:)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/service/update.go:1007:43: Using a reference for the variable on range scope `entry` (scopelint)
if _, ok := portSet[portConfigToString(&entry)]; !ok {
^
cli/command/service/update.go:1008:32: Using a reference for the variable on range scope `entry` (scopelint)
portSet[portConfigToString(&entry)] = entry
^
cli/command/service/update.go:1034:44: Using a reference for the variable on range scope `port` (scopelint)
if _, ok := portSet[portConfigToString(&port)]; ok {
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds tests for setting and updating swarm service CredentialSpecs,
especially when using a Config as a credential spec.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Updates the CredentialSpec handling code for services to allow using
swarm Configs.
Additionally, fixes a bug where the `--credential-spec` flag would not
be respected on service updates.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Before this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Notice that the memory limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000
},
"Reservations": {
"NanoCPUs": 2000000000
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Notice that the CPU limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"MemoryBytes": 209715200
},
"Reservations": {
"MemoryBytes": 209715200
}
}
After this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Confirm that the CPU limits/reservations are updated, but memory limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Confirm that the Mempry limits/reservations are updated, but CPU limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
}
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since go 1.7, "context" is a standard package. Since go 1.9,
x/net/context merely provides some types aliased to those in
the standard context package.
The changes were performed by the following script:
for f in $(git ls-files \*.go | grep -v ^vendor/); do
sed -i 's|golang.org/x/net/context|context|' $f
goimports -w $f
for i in 1 2; do
awk '/^$/ {e=1; next;}
/\t"context"$/ {e=0;}
{if (e) {print ""; e=0}; print;}' < $f > $f.new && \
mv $f.new $f
goimports -w $f
done
done
[v2: do awk/goimports fixup twice]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Removing a host by `<host>:<ip>` should only remove occurences of the host with
a matching IP-address, instead of removing all entries for that host.
In addition, combining `--host-rm` and `--host-add` for the same host should
result in the new host being added.
This patch fixes the way the diff is calculated to allow combining
removing/adding, and to support entries having both a canonical, and aliases.
Aliases cannot be added by the CLI, but are supported in the Service spec, thus
should be taken into account:
Entries can be removed by either a specific `<host-name>:<ip-address>`
mapping, or by `<host>` alone:
- If both IP-address and host-name is provided, only remove the hostname
from entries that match the given IP-address.
- If only a host-name is provided, remove the hostname from any entry it
is part of (either as _canonical_ host-name, or as _alias_).
- If, after removing the host-name from an entry, no host-names remain in
the entry, the entry itself should be removed.
For example, the list of host-entries before processing could look like this:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host1 host4",
"127.0.0.3 host1",
"127.0.0.1 host1",
}
Removing `host1` removes every occurrence:
hosts = &[]string{
"127.0.0.2 host3 host2 host4",
"127.0.0.1 host4",
}
Whereas removing `host1:127.0.0.1` only remove the host if the IP-address matches:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host4",
"127.0.0.3 host1",
}
Before this patch:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.4 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[]
After this patch is applied:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.5 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[127.0.0.2 foo 127.0.0.3 foo 127.0.0.4 foo]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When adding a network using `docker service update --network-add`,
the new network was added by _name_.
Existing entries in a service spec are listed by network ID, which
resulted in the CLI not detecting duplicate entries for the same
network.
This patch changes the behavior to always use the network-ID,
so that duplicate entries are correctly caught.
Before this change;
$ docker network create -d overlay foo
$ docker service create --name=test --network=foo nginx:alpine
$ docker service update --network-add foo test
$ docker service inspect --format '{{ json .Spec.TaskTemplate.Networks}}' test
[
{
"Target": "9ot0ieagg5xv1gxd85m7y33eq"
},
{
"Target": "9ot0ieagg5xv1gxd85m7y33eq"
}
]
After this change:
$ docker network create -d overlay foo
$ docker service create --name=test --network=foo nginx:alpine
$ docker service update --network-add foo test
service is already attached to network foo
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Extra hosts (`extra_hosts` in compose-file, or `--hosts` in services) adds
custom host/ip mappings to the container's `/etc/hosts`.
The current implementation used a `map[string]string{}` as intermediate
storage, and sorted the results alphabetically when converting to a service-spec.
As a result, duplicate hosts were removed, and order of host/ip mappings was not
preserved (in case the compose-file used a list instead of a map).
According to the **host.conf(5)** man page (http://man7.org/linux/man-pages/man5/host.conf.5.html)
multi Valid values are on and off. If set to on, the resolver
library will return all valid addresses for a host that
appears in the /etc/hosts file, instead of only the first.
This is off by default, as it may cause a substantial
performance loss at sites with large hosts files.
Multiple entries for a host are allowed, and even required for some situations,
for example, to add mappings for IPv4 and IPv6 addreses for a host, as illustrated
by the example hosts file in the **hosts(5)** man page (http://man7.org/linux/man-pages/man5/hosts.5.html):
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 localhost
# 127.0.1.1 is often used for the FQDN of the machine
127.0.1.1 thishost.mydomain.org thishost
192.168.1.10 foo.mydomain.org foo
192.168.1.13 bar.mydomain.org bar
146.82.138.7 master.debian.org master
209.237.226.90 www.opensource.org
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
This patch changes the intermediate storage format to use a `[]string`, and only
sorts entries if the input format in the compose file is a mapping. If the input
format is a list, the original sort-order is preserved.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--host-add` flag adds a new `host:ip` mapping. Even though
adding an entry is idempotent (adding the same mapping multiple
times does not update the service's definition), it does not
_update_ an existing mapping with a new IP-address (multiple
IP-addresses can be defined for a host).
This patch removes the "or update" part from the flag's
description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 330a0035334871d92207b583c1c36d52a244753f added a `--detach=false` option
to various service-related commands, with the intent to make this the default in
a future version (17.09).
This patch changes the default to use "interactive" (non-detached), allowing
users to override this by setting the `--detach` option.
To prevent problems when connecting to older daemon versions (17.05 and below,
see commit db60f25561), the detach option is
ignored for those versions, and detach is always true.
Before this change, a warning was printed to announce the upcoming default:
$ docker service create nginx:alpine
saxiyn3pe559d753730zr0xer
Since --detach=false was not specified, tasks will be created in the background.
In a future release, --detach=false will become the default.
After this change, no warning is printed, but `--detach` is disabled;
$ docker service create nginx:alpine
y9jujwzozi0hwgj5yaadzliq6
overall progress: 1 out of 1 tasks
1/1: running [==================================================>]
verify: Service converged
Setting the `--detach` flag makes the cli use the pre-17.06 behavior:
$ docker service create --detach nginx:alpine
280hjnzy0wzje5o56gr22a46n
Running against a 17.03 daemon, without specifying the `--detach` flag;
$ docker service create nginx:alpine
kqheg7ogj0kszoa34g4p73i8q
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Implement runRollback to not use runUpdate
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add version tag and add flag quiet to suppress progress output
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed flags from warnDetachDefault
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add detach flag on rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Create a fakeClient for service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Added unit test for rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface instead of *command.DockerCli in service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed flags from warnDetachDefault"
This reverts commit 3e4f601c8a82cc2599a755dc693409bbc47917fc.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed test.NewFakeCli instanciation
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed unused receiver
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Replaced cli by dockerCli
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed unused receiver"
This reverts commit 604ef7c13df3d019949ca81d992db501114dafce.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed last typo
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
This fix use `scope=swarm` for service related network inspect.
The purpose is that, in case multiple networks with the same
name exist in different scopes, it is still possible to obtain
the network for services.
This fix is related to moby/moby#33630 and docker/cli#167
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Sebastiaan van Stijn
George Margaritis
Brian Goff
CrazyMax
Nicolas De Loof
Jorge Vallecillo
Tibor Vass
Albin Kerouanton
Drew Erny
Olli Janatuinen
Arash Deshmeh
Vincent Demeester
Victor Vieux
Kir Kolyshkin
Renaud Gaubert
Simon Ferquel
Sebastiaan van Stijn
Jimmy Leger
Daniel Nephin
Yong Tang