This fix tries to address the issue raised in 27189 where
it is not possible to support configured formatting stored in
config.json.
Since `--format` was not supported in `docker service ps`,
the flag `--format` has also been added in this fix.
This fix
1. Add `--format` to `docker service ps`
2. Add `tasksFormat` to config.json
3. Add `--format` to `docker stack ps`
4. Add `--format` to `docker node ps`
The related docs has been updated.
An integration test has been added.
This fix fixes 27189.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Command name should be a H1
Only Description, Examples, and Related Commands should be H2
Changed 'Related information' heading to 'Related commands' since 99% it is only linking commands
Added some examples where relevant
Signed-off-by: Misty Stanley-Jones <misty@docker.com>
Signed-off-by: Lewis Daly <lewisdaly@me.com>
Updated uid/gid reference to be more canonical - and signed commit
Signed-off-by: Lewis Daly <lewisdaly@me.com>
Editorial suggestion
I tried my hand at rewriting this a bit for readability. Can you please verify that the facts are correct, especially about the permission changes? You can feel free to squash my commit with yours so that it's signed. You'll need to pull the change from your fork to work on it locally.
Editorial suggestion
I tried my hand at rewriting this a bit for readability. Can you please verify that the facts are correct, especially about the permission changes? You can feel free to squash my commit with yours so that it's signed. You'll need to pull the change from your fork to work on it locally.
This allows a plugin to be upgraded without requiring to
uninstall/reinstall a plugin.
Since plugin resources (e.g. volumes) are tied to a plugin ID, this is
important to ensure resources aren't lost.
The plugin must be disabled while upgrading (errors out if enabled).
This does not add any convenience flags for automatically
disabling/re-enabling the plugin during before/after upgrade.
Since an upgrade may change requested permissions, the user is required
to accept permissions just like `docker plugin install`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to improve the display of `docker service ls`
and adds `--format` flag to `docker service ls`.
In addition to `--format` flag, several other improvement:
1. Updates `docker stacks service`.
2. Adds `servicesFormat` to config file.
Related docs has been updated.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix made several updates:
1. Update opts.MemBytes so that default value will not show up.
The reason is that in case a default value is decided by daemon,
instead of client, we actually want to not show default value.
2. Move `docker run/create/build` to use opts.MemBytes for `--shm-size`
This is to bring consistency between daemon and docker run
3. docs updates.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--filter capability=[volumedriver|authz]` to `docker plugin ls`.
The related docs has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--filter enabled=true` to `docker plugin ls`,
as was specified in 28624.
The related API and docs has been updated.
An integration test has been added.
This fix fixes 28624.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the enhancement proposal raised in
27178 for filtering based on published or exposed ports of
`docker ps --filter`.
In this fix, two filter options, `publish` and `expose` have
been added to take either `<port>[/<protocol>]` or `<from>-<to>[/<protocol>]`
and filtering on containers.
An integration test has been added to cover the changes.
This fix fixes 27178.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This introduce a new `--device-cgroup-rule` flag that allow a user to
add one or more entry to the container cgroup device `devices.allow`
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
This fix tries to address the issue raised in 29972 where
it was not possible to specify `--read-only` for `docker service create`
and `docker service update`, in order to have the container's root file
system to be read only.
This fix adds `--read-only` and update the `ReadonlyRootfs` in `HostConfig`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 29972.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- Use the word letter rather than character to refer to letters ;) when trying to specify that only letters and numbers can be used, and not ANY character...
- Small corrections
Fixes#29821
Signed-off-by: Timothy Hobbs <timothy@hobbs.cz>
This fix tries to add a placeholder `.CreatedAt` for Go
format template in `docker network ls --format`.
While working on 29226, I noticed that it is not possible to
display network's creation time in `docker network ls`, with or
without `--format`.
We are able to find the timestamp through `docker network inspect` though.
However, as we allows networks to be pruned based on the timestamp
(see 29226), showing the timestamp in `docker network ls --format`
would be much useful now.
This fix adds the `.CreatedAt` placeholder for `docker network ls --format`.
The default output was not changed for `docker network ls --format`.
A test case for unit tests has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Commit ed13c3abfb242905ec012e8255dc6f26dcf122f6 added flags
for Docker Content Trust. Depending on the `verify` boolean,
the message is "Skip image verification", or "Skip image signing".
"Signing" is intended for `docker push` / `docker plugin push`.
During the migration to Cobra, this boolean got flipped for
`docker push` (9640e3a4514f96a890310757a09fd77a3c70e931),
causing `docker push` to show the incorrect flag description.
This patch changes the flags to use the correct description
for `docker push`, and `docker plugin push`.
To prevent this confusion in future, the boolean argument
is removed, and a `AddTrustSigningFlags()` function is added.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the enhancement discussed in 28735 to add
`--format` for the output of `docker plugin ls`.
This fix
1. Add `--format` and `--quiet` flags to `docker plugin ls`
2. Convert the current implementation to use `formatter`, consistent with
other docker list commands.
3. Add `pluginsFormat` for config.json.
Related docs has been updated.
Several unit tests have been added to cover the changes.
This fix is related to 28708 and 28735.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Issue #30082 demonstrated that their is possible confusion with the "/."
where the tailing "." can appear to be merely punctuation within the
document rather than a highly pertinent part of `SRC_PATH`.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24596 where it was not
possible to join as manager only (`--availability=drain`).
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
NOTE: Additional pull request for swarmkit and engine-api will
be created separately.
This fix fixes 24596.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up for comment
https://github.com/docker/docker/pull/28535#issuecomment-263215225
This fix provides `--filter until=<timestamp>` for `docker container/image prune`.
This fix adds `--filter until=<timestamp>` to `docker container/image prune`
so that it is possible to specify a timestamp and prune those containers/images
that are earlier than the timestamp.
Related docs has been updated
Several integration tests have been added to cover changes.
This fix fixes#28497.
This fix is related to #28535.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address issue raised in 25228 to support
multiple service IDs on `docker service ps`.
Multiple IDs are allowed with `docker service ps ...`, and
related documentation has been updated.
A test has been added to cover the changes.
This fix fixes 25228.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The `DOCKER_HIDE_LEGACY_COMMANDS` environment
variable was added in a7c8bcac2ba60d6dd25a1157085d9245bed556ce
but not documented.
This adds the variable to the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
try to pass test
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
try to pass the test
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
In #28507 and #28885, `docker service/node ps -a` has been removed so that
information about slots are show up even without `-a` flag.
The output of `docker stack ps` reused the same output as `docker service/node ps`.
However, the `-a` was still there. It might make sense to remove `docker stack ps -a`
as well to bring consistency with `docker service/node ps`.
This fix is related to #28507, #28885, and #25983.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This fix tries to address the issue raised in 29291 where
the output of `--replicas` in `service create/update`:
```
--replicas uint Number of tasks (default none)
```
is misleading. User might incorrectly assume the number of replicas
would be `0` (`none`) by default, while the actual default is `1`.
The issue comes from the fact that some of the default values are
from daemon and it is not possible for client to find out the default
value.
In this case, it might be better to just simply not displaying `(default none)`.
This fix returns "" for `Uint64Opt` so that `(default none)` is hidden.
In addition to `--replicas`, this fix also changes
`--restart-delay`, `--restart-max-attempts`, `--stop-grace-period`,
`--health-interval`, `--health-timeout`, and `--restart-window`
in a similiar fashion.
New Output:
```
--health-interval duration Time between running the check (ns|us|ms|s|m|h)
--health-timeout duration Maximum time to allow one check to run (ns|us|ms|s|m|h)
...
--replicas uint Number of tasks
...
--restart-delay duration Delay between restart attempts (ns|us|ms|s|m|h)
--restart-max-attempts uint Maximum number of restarts before giving up
--restart-window duration Window used to evaluate the restart policy (ns|us|ms|s|m|h)
...
--stop-grace-period duration Time to wait before force killing a container (ns|us|ms|s|m|h)
```
The docs has been updated. Note the docs for help output of `service create/update`
is out of sync with the current master. This fix replace with the update-to-date
help output.
This fix fixes 29291.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 28581 and 28927
where it is not possible to create a secret from a file (only
through STDIN).
This fix add a flag `--file` to `docker secret create` so that
it is possible to create a secret from a file with:
```
docker secret create --file secret.in secret.name
```
or
```
echo TEST | docker secret create --file - secret.name
```
Related docs has been updated.
An integration test has been added to cover the changes.
This fix fixes 28581.
This fix is related to 28927.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit bbd2018ee19eff5594ae3986bf56fbcd0044699d
changed the output format of `docker service ps`.
this patch updates the reference docs
to match the updated output format.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the enhancement proposed in 28708 to display
ID field for the output of `docker plugin ls`.
This fix add `ID` field to the output of `docker plugin ls`
Related docs has been updated.
This fix fixes 28708.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in discussion of
PR 28735 where it was not possible to manage plugin based on
plugin ID. Previously it was not possible to invoke
`docker plugin inspect` with a plugin ID (or ID prefix).
This fix updates the implementation of `docker plugin inspect`
so that it is possbile to search based on a plugin name, or a
plugin ID. A short format of plugin ID (prefix) is also possible,
as long as there is no ambiguity.
Previously the check of `docker plugin inspect` was mostly done
on the client side. This could potentially cause inconsistency
between API and CMD. This fix move all the checks to daemon side
so that API and CMD will be consistent.
An integration test has been added to cover the changes.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This commit reverts 273eeb813c1db0f42c2ad5e053972eeb00907568 (#26825).
For the discussion so far, please refer to #28527.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
`docker stack config` command does not exists anymore, removing it
from the command reference documentation.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Currently the help output of `docker network ls --filter` is:
```
Options:
-f, --filter value Provide filter values (i.e. 'dangling=true') (default [])
...
```
This caused confusion as only the following filters are supported at the moment:
- `driver`
- `type`
- `name`
- `id`
- `label`
This fix update the help output of `docker network ls --filter` and `network_ls.md`.
The `dangling=true` description has been replace to:
```
Options:
-f, --filter filter Provide filter values (i.e. 'driver=bridge')
...
```
This fix fixes 28786.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The "--no-trunc" option toggles between showing/hiding
digests.
This updates the reference to show this difference.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A recent PR added `(ns|us|ms|s|m|h)` to the descriptions of some
duration options, but not all. Add it to the remaining options for
consistency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix updates docs for `docker info` for most recent changes.
It also made several chagnes:
1. Replace 0.12.0-dev to 0.13.0 for api docs v1.24.
2. Replace 0.13.0-dev to 0.13.0 for api docs v1.25
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address 27902 by adding a flag `--host`
to `docker service create` and `--host-add/--host-rm` to
`docker service update`, so that it is possible to
specify extra `host:ip` settings in `/etc/hosts`.
This fix adds `Hosts` in swarmkit's `ContainerSpec` so that it
is possible to specify extra hosts during service creation.
Related docs has been updated.
An integration test has been added.
This fix fixes 27902.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This change incorporates feedback from @thaJeztah in the PR that added
the autolock flag. It changes the descriptions to be different for
"swarm init" and "swarm update" so that the boolean nature so that the
purpose of the flag in both contexts is clearer.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Harald Albers
yupengzte
Zhang Wei
erxian
Daniel Zhang
Yong Tang
Kenfe-Mickael Laventure
allencloud
Misty Stanley-Jones
Aaron Lehmann
Lewis Daly
Brian Goff
Ma Shimiao
Timothy Hobbs
Michael Irwin
Sebastiaan van Stijn
Yanqiang Miao
Ian Campbell
Dong Chen
Victor Vieux
ttronicum
yuexiao-wang
John Howard
zhenghenghuo
Tonis Tiigi
Anusha Ragunathan
liwenqi
lixiaobing10051267
Michael
Trapier Marshall
Kei Ohmura
Jake Sanders
Chris Gavin
Vincent Demeester
Akihiro Suda
Victor Vieux
Daniel Nephin
dattatrayakumbhar04
cyli
Jacob Tomlinson
Ben Firshman
bbayani
Boaz Shuster
Andrea Luzzardi
Steve Durrheimer
Santhosh Manohar
Evan Hazlett