On `docker ps`, port bindings with an IPv6 HostIP should have their
addresses put into brackets when joining them to their ports.
RFC 3986 (Section 3.2.2) stipulates that IPv6 addresses should be
enclosed within square brackets. This RFC is only about URIs. However,
doing so here helps user identifier what's part of the IP address and
what's the port. It also makes it easier to copy/paste that
'[addr]:port' into other software (including browsers).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 964155cd27)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This is a follow-up to 0e73168b7e
This repository is not yet a module (i.e., does not have a `go.mod`). This
is not problematic when building the code in GOPATH or "vendor" mode, but
when using the code as a module-dependency (in module-mode), different semantics
are applied since Go1.21, which switches Go _language versions_ on a per-module,
per-package, or even per-file base.
A condensed summary of that logic [is as follows][1]:
- For modules that have a go.mod containing a go version directive; that
version is considered a minimum _required_ version (starting with the
go1.19.13 and go1.20.8 patch releases: before those, it was only a
recommendation).
- For dependencies that don't have a go.mod (not a module), go language
version go1.16 is assumed.
- Likewise, for modules that have a go.mod, but the file does not have a
go version directive, go language version go1.16 is assumed.
- If a go.work file is present, but does not have a go version directive,
language version go1.17 is assumed.
When switching language versions, Go _downgrades_ the language version,
which means that language features (such as generics, and `any`) are not
available, and compilation fails. For example:
# github.com/docker/cli/cli/context/store
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/storeconfig.go:6:24: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/store.go:74:12: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
Note that these fallbacks are per-module, per-package, and can even be
per-file, so _(indirect) dependencies_ can still use modern language
features, as long as their respective go.mod has a version specified.
Unfortunately, these failures do not occur when building locally (using
vendor / GOPATH mode), but will affect consumers of the module.
Obviously, this situation is not ideal, and the ultimate solution is to
move to go modules (add a go.mod), but this comes with a non-insignificant
risk in other areas (due to our complex dependency tree).
We can revert to using go1.16 language features only, but this may be
limiting, and may still be problematic when (e.g.) matching signatures
of dependencies.
There is an escape hatch: adding a `//go:build` directive to files that
make use of go language features. From the [go toolchain docs][2]:
> The go line for each module sets the language version the compiler enforces
> when compiling packages in that module. The language version can be changed
> on a per-file basis by using a build constraint.
>
> For example, a module containing code that uses the Go 1.21 language version
> should have a `go.mod` file with a go line such as `go 1.21` or `go 1.21.3`.
> If a specific source file should be compiled only when using a newer Go
> toolchain, adding `//go:build go1.22` to that source file both ensures that
> only Go 1.22 and newer toolchains will compile the file and also changes
> the language version in that file to Go 1.22.
This patch adds `//go:build` directives to those files using recent additions
to the language. It's currently using go1.19 as version to match the version
in our "vendor.mod", but we can consider being more permissive ("any" requires
go1.18 or up), or more "optimistic" (force go1.21, which is the version we
currently use to build).
For completeness sake, note that any file _without_ a `//go:build` directive
will continue to use go1.16 language version when used as a module.
[1]: 58c28ba286/src/cmd/go/internal/gover/version.go (L9-L56)
[2]; https://go.dev/doc/toolchain#:~:text=The%20go%20line%20for,file%20to%20Go%201.22
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously, the formatter would ignore the quiet option if a custom format
was passed; this situation was handled in runPs(), where custom formats
would only be applied if the quiet option was not set, but only if the
format was set in the CLI's config.
This patch updates NewContainerFormat() to do the same, even if a `--format`
was passed on the command-line.
This is a change in behavior, so may need some discussion; possible alternatives;
- produce an error if both `--format` and `--quiet` are passed
- print a warning if both are passed (but use the logic from this patch)
Before this patch:
```console
docker ps --format '{{.Image}}'
ubuntu:22.04
alpine
docker ps --format '{{.Image}}' --quiet
ubuntu:22.04
alpine
mkdir -p ~/.docker/
echo '{"psFormat": "{{.Image}}"}' > ~/.docker/config.json
docker ps
ubuntu:22.04
alpine
docker ps --quiet
ubuntu:22.04
alpine
```
With this patch applied:
```console
docker ps --format '{{.Image}}'
ubuntu:22.04
alpine
docker ps --format '{{.Image}}' --quiet
40111f61d5c5
482efdf39fac
mkdir -p ~/.docker/
echo '{"psFormat": "{{.Image}}"}' > ~/.docker/config.json
docker ps
ubuntu:22.04
alpine
docker ps --quiet
40111f61d5c5
482efdf39fac
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go do not format these comments, so we can already
reformat them ahead of time to prevent gofmt linting failing once
we update to Go 1.19 or up.
Result of:
gofmt -s -w $(find . -type f -name '*.go' | grep -v "/vendor/")
With some manual adjusting.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/compose/interpolation/interpolation.go:102:4: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
"invalid interpolation format for %s: %#v. You may need to escape any $ with another $.",
^
cli/command/stack/loader/loader.go:30:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return nil, errors.Errorf("Compose file contains unsupported options:\n\n%s\n",
^
cli/command/formatter/formatter.go:76:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return tmpl, errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/formatter/formatter.go:97:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/image/build.go:257:25: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("error checking context: '%s'.", err)
^
cli/command/volume/create.go:35:27: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Conflicting options: either specify --name or provide positional arg, not both\n")
^
cli/command/container/create.go:160:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("failed to remove the CID file '%s': %s \n", cid.path, err)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The tabwriter was configured to have a min-width for columns of 20 positions.
This seemed quite wide, and caused smaller columns to be printed with a large
gap between.
Before:
docker container stats
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
29184b3ae391 amazing_shirley 0.00% 800KiB / 1.944GiB 0.04% 1.44kB / 0B 0B / 0B 1
403c101bad56 agitated_swartz 0.15% 34.31MiB / 1.944GiB 1.72% 10.2MB / 206kB 0B / 0B 51
0dc4b7f6c6be container2 0.00% 1.012MiB / 1.944GiB 0.05% 12.9kB / 0B 0B / 0B 5
2d99abcc6f62 container99 0.00% 972KiB / 1.944GiB 0.05% 13kB / 0B 0B / 0B 5
9f9aa90173ac foo 0.00% 820KiB / 1.944GiB 0.04% 13kB / 0B 0B / 0B 5
docker container ls
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
29184b3ae391 docker-cli-dev "ash" 4 hours ago Up 4 hours amazing_shirley
403c101bad56 docker-dev:master "hack/dind bash" 3 days ago Up 3 days agitated_swartz
0dc4b7f6c6be nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container2
2d99abcc6f62 nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container99
9f9aa90173ac nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp foo
docker image ls
REPOSITORY TAG IMAGE ID CREATED SIZE
docker-cli-dev latest 5f603caa04aa 4 hours ago 610MB
docker-cli-native latest 9dd29f8d387b 4 hours ago 519MB
docker-dev master 8132bf7a199e 3 days ago 2.02GB
docker-dev improve-build-errors 69e208994b3f 11 days ago 2.01GB
docker-dev refactor-idtools 69e208994b3f 11 days ago 2.01GB
After:
docker container stats
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
29184b3ae391 amazing_shirley 0.14% 5.703MiB / 1.944GiB 0.29% 1.44kB / 0B 0B / 0B 10
403c101bad56 agitated_swartz 0.15% 56.97MiB / 1.944GiB 2.86% 10.2MB / 206kB 0B / 0B 51
0dc4b7f6c6be container2 0.00% 1016KiB / 1.944GiB 0.05% 12.9kB / 0B 0B / 0B 5
2d99abcc6f62 container99 0.00% 956KiB / 1.944GiB 0.05% 13kB / 0B 0B / 0B 5
9f9aa90173ac foo 0.00% 980KiB / 1.944GiB 0.05% 13kB / 0B 0B / 0B 5
docker container ls
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
29184b3ae391 docker-cli-dev "ash" 12 minutes ago Up 12 minutes amazing_shirley
403c101bad56 docker-dev:master "hack/dind bash" 3 days ago Up 3 days agitated_swartz
0dc4b7f6c6be nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container2
2d99abcc6f62 nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container99
9f9aa90173ac nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp foo
docker image ls
REPOSITORY TAG IMAGE ID CREATED SIZE
docker-cli-dev latest 5f603caa04aa 4 hours ago 610MB
docker-cli-native latest 9dd29f8d387b 4 hours ago 519MB
docker-dev master 8132bf7a199e 3 days ago 2.02GB
docker-dev improve-build-errors 69e208994b3f 11 days ago 2.01GB
docker-dev refactor-idtools 69e208994b3f 11 days ago 2.01GB
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Update the list of overrides for table headers so that columns using split or
join will produce the correct table header.
Before this patch:
docker ps --format='table {{split .Names "/"}}'
[NAMES]
[unruffled_mclean]
[eloquent_meitner]
[sleepy_grothendieck]
With this patch applied:
docker ps --format='table {{split .Names "/"}}'
NAMES
[unruffled_mclean]
[eloquent_meitner]
[sleepy_grothendieck]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch, using a template that used templating functions (such as
`lower` or `json`) caused the command to fail in the pre-processor step (in
`buildContainerListOptions`):
docker ps --format='{{upper .Names}}'
template: :1:8: executing "" at <.Names>: invalid value; expected string
This problem was due to the pre-processing using a different "context" type than
was used in the actual template, and custom functions to not be defined when
instantiating the Go template.
With this patch, using functions in templates works correctly:
docker ps --format='{{upper .Names}}'
MUSING_NEUMANN
ELOQUENT_MEITNER
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/formatter/container_test.go:315:17: Error return value of `ContainerWrite` is not checked (errcheck)
ContainerWrite(context.context, containers)
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The State field allows printing the container state without
additional information about uptime, healthcheck, etc.
With this patch, the container's state can be printed independently:
```bash
docker ps -a --format '{{.State}}'
running
paused
exited
created
```
```bash
docker ps -a --format 'table {{.Names}}\t{{.State}}\t{{.Status}}'
NAMES STATE STATUS
elastic_burnell running Up About a minute
pausie paused Up 5 minutes (Paused)
peaceful_stonebraker exited Exited (0) 10 hours ago
vigilant_shaw created Created
```
```bash
docker ps -a --format 'raw'
container_id: 0445f73f3a71
image: docker-cli-dev
command: "ash"
created_at: 2019-07-12 11:16:11 +0000 UTC
state: running
status: Up 2 minutes
names: elastic_burnell
labels:
ports:
container_id: 1aff69a3912c
image: nginx:alpine
command: "nginx -g 'daemon of ..."
created_at: 2019-07-12 11:12:10 +0000 UTC
state: paused
status: Up 6 minutes (Paused)
names: pausie
labels: maintainer=NGINX Docker Maintainers <docker-maint@nginx.com>
ports: 80/tcp
container_id: d48acf66c318
image: alpine:3.9.3
command: "id -u"
created_at: 2019-07-12 00:52:17 +0000 UTC
state: exited
status: Exited (0) 10 hours ago
names: peaceful_stonebraker
labels:
ports:
container_id: a0733fe0dace
image: b7b28af77ffe
command: "/bin/sh -c '#(nop) ..."
created_at: 2019-07-12 00:51:29 +0000 UTC
state: created
status: Created
names: vigilant_shaw
labels:
ports:
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Albin Kerouanton
Sebastiaan van Stijn
Vincent Demeester
Daniel Nephin
Wataru Ishida
Chao Wang
Arash Deshmeh
Josh Soref
Daniel Nephin