Only show progress updates after a time threshold has elapsed in order
to reduce the number of writes to the terminal.
This improves readability of the progress.
Also moves cursor show/hide into the progress printer to reduce chances
if messing up the user's terminal in case of cancellation.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Instead of rewriting the entire line every time only clear and write
the parts that changed.
- Hide the cursor while writing progress
Both these things make the progress updates significantly easier to
read.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fixes a case where a non-tty will have control characters + the log
line for every single read operation.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This code depended on the registry Service interface, which has been removed,
so needed to be refactored. Digging further into the reason this code existed,
it looked like the Class=plugin was previously required on Docker Hub to handle
plugins, but this requirement is no longer there, so we can remove this special
handling.
This patch removes the special handling to both remove the use of the registry.Service
interface, as well as removing complexity that is no longer needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was deprecated in b4ca1c7368,
which is part of the v23.0 release, and is no longer used, so we can remove it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The comment was not formatted correctly, and because of that not picked up as
being deprecated.
updates b4ca1c7368
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were deliberately producing errors as part of the test, but
printing those errors could be confusing / make it more difficult to find
actual test-failures.
Before this patch:
=== RUN TestVolumeCreateErrors
Error: conflicting options: either specify --name or provide positional arg, not both
Error: "create" requires at most 1 argument.
See 'create --help'.
Usage: create [OPTIONS] [VOLUME] [flags]
Create a volume
Error: error creating volume
--- PASS: TestVolumeCreateErrors (0.00s)
PASS
With this patch applied:
=== RUN TestVolumeCreateErrors
--- PASS: TestVolumeCreateErrors (0.00s)
PASS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make the error more specific by stating that it's caused by a specific
environment variable and not an environment as a whole.
Also don't escape the variable to make it more readable.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
On Windows, ignore all variables that start with "=" when building an
environment variables map for stack.
For MS-DOS compatibility cmd.exe can set some special environment
variables that start with a "=" characters, which breaks the general
assumption that the first encountered "=" separates a variable name from
variable value and causes trouble when parsing.
These variables don't seem to be documented anywhere, but they are
described by some third-party sources and confirmed empirically on my
Windows installation.
Useful sources:
https://devblogs.microsoft.com/oldnewthing/20100506-00/?p=14133https://ss64.com/nt/syntax-variables.html
Known variables:
- `=ExitCode` stores the exit code returned by external command (in hex
format)
- `=ExitCodeAscii` - same as above, except the value is the ASCII
representation of the code (so exit code 65 (0x41) becomes 'A').
- `=::=::\` and friends - store drive specific working directory.
There is one env variable for each separate drive letter that was
accessed in the shell session and stores the working directory for that
specific drive.
The general format for these is:
`=<DRIVE_LETTER>:=<CWD>` (key=`=<DRIVE_LETTER>:`, value=`<CWD>`)
where <CWD> is a working directory for the drive that is assigned to
the letter <DRIVE_LETTER>
A couple of examples:
`=C:=C:\some\dir` (key: `=C:`, value: `C:\some\dir`)
`=D:=D:\some\other\dir` (key: `=C:`, value: `C:\some\dir`)
`=Z:=Z:\` (key: `=Z:`, value: `Z:\`)
`=::=::\` is the one that seems to be always set and I'm not exactly
sure what this one is for (what's drive `::`?). Others are set as
soon as you CD to a path on some drive. Considering that you start a
cmd.exe also has some working directory, there are 2 of these on start.
All these variables can be safely ignored because they can't be
deliberately set by the user, their meaning is only relevant to the
cmd.exe session and they're all are related to the MS-DOS/Batch feature
that are irrelevant for us.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Tests mocking the output of GET images/json with fakeClient used an
array with one empty element as an empty response.
Change it to just an empty array.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The error returned from "os/exec".Command when attempting to execute a
directory has been changed from syscall.EACCESS to syscall.EISDIR on
Go 1.20. 2b8f214094
Consequently, any runc runtime built against Go 1.20 will return an
error containing 'is a directory' and not 'permission denied'. Update
the string matching so the CLI exits with status code 126 on 'is a
directory' errors (EISDIR) in addition to 'permission denied' (EACCESS).
Signed-off-by: Cory Snider <csnider@mirantis.com>
This prevents us needing to attempt to reconstruct the exact indentation
registry side, which is not canonical - so may differ.
Signed-off-by: Justin Chadwell <me@jedevc.com>
This behavior should not break any more use cases than before.
Previously, if the mismatch occured, we would actually push a manifest
that we then never referred to in the manifest list! If this was done in
a new repository, the command would fail with an obscure error from the
registry - the content wouldn't exist with the descriptor we expect it
to.
Signed-off-by: Justin Chadwell <me@jedevc.com>
The DockerCLI interface was repeating the Streams interface. Embed
the interface to make it more transparent that they're the same.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Synchronize append on the `removed` slice with mutex because
containerRemoveFunc is called in parallel for each removed container by
`container rm` cli command.
Also reduced the shared access area by separating the scopes of test
cases.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This comment was added in 7929888214
when this code was still in the Moby repository. That comment doesn't appear
to apply to the CLI's usage of this struct though, as nothing in the CLI
sets this field (or uses it), so this should be safe to remove.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows the cli to be initialized with a (custom) API client.
Currently to be used for unit tests, but could be used for other
scenarios.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make sure that the container has multiple port-mappings to illustrate
that only the given port is matched.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use strings.Cut
- don't use nat.NewPort as we don't accept port ranges
- use an early return if there's no results
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
if a context is set (e.g. through DOCKER_CONTEXT or the CLI config file), but
wasn't found, then a "stub" context is added, including an error message that
the context doesn't exist.
DOCKER_CONTEXT=nosuchcontext docker context ls
NAME DESCRIPTION DOCKER ENDPOINT ERROR
default Current DOCKER_HOST based configuration unix:///var/run/docker.sock
nosuchcontext * context "nosuchcontext": context not found: …
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This updates `docker context ls` to:
- not abort listing contexts when failing one (or more) contexts
- instead, adding an ERROR column to inform the user there was
an issue loading the context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows commands that don't require a client connection (such as `context use`)
to be functional, but still produces an error when trying to run a command that
needs to connect with the API;
mkdir -p ~/.docker/ && echo '{"currentContext":"nosuchcontext"}' > ~/.docker/config.json
docker version
Failed to initialize: unable to resolve docker endpoint: load context "nosuchcontext": context does not exist: open /root/.docker/contexts/meta/8bfef2a74c7d06add4bf4c73b0af97d9f79c76fe151ae0e18b9d7e57104c149b/meta.json: no such file or directory
docker context use default
default
Current context is now "default"
docker version
Client:
Version: 22.06.0-dev
API version: 1.42
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "docker context show" command is intended to show the currently configured
context. While the context that's configured may not be valid (e.g., in case
an environment variable was set to configure the context, or if the context
was removed from the filesystem), we should still be able to _show_ the
context.
This patch removes the context validation, and instead only shows the context.
This can help in cases where the context is used to (e.g.) set the command-
prompt, but the user removed the context. With this change, the context name
can still be shown, but commands that _require_ the context will still fail.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This internalizes constructing the Client(), which allows us to provide
fallbacks when trying to determin the current API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also move the resolveContextName() function together with the
method for easier cross-referencing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There's no strict need to perform this validation inside this function;
validating flags should happen earlier, to allow faster detecting of
configuration issues (we may want to have a central config "validate"
function though).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
resolveContextName() is used to find which context to use, based on the
available configuration options. Once resolved, the context name is
used to load the actual context, which will fail if the context doesn't
exist, so there's no need to produce an error at this stage; only
check priority of the configuration options to pick the context
with the highest priority.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
CommonOptions was inherited from when the cli and daemon were in the same
repository, and some options would be shared between them. That's no longer
the case, and some options are even "incorrect" (for example, while the
daemon can be configured to run on multiple hosts, the CLI can only connect
with a single host / connection). This patch does not (yet) address that,
but merges the CommonOptions into the ClientOptions.
An alias is created for the old type, although it doesn't appear there's
any external consumers using the CommonOptions type (or its constructor).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Make the package-level configMergeTests local to the test itself.
- Rename fields to better describe intent
- Remove some redundant variables
- Reverse "expected" and "actual" fields for consistency
- Use assert.Check() to not fail early
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Looks like the linter uses an explicit -lang, which (for go1.19)
results in some additional formatting for octal values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The package defined various special errors; these errors existed for two reasons;
- being able to distinguish "not found" errors from other errors (as "not found"
errors can be ignored in various cases).
- to be able to update the context _name_ in the error message after the error
was created. This was needed in cases where the name was not available at the
location where the error was produced (e.g. only the "id" was present), and
the helpers to detect "not found" errors did not support wrapped errors (so
wrapping the error with a "name" could break logic); a `setContextName` interface
and corresponding `patchErrContextName()` utility was created for this (which
was a "creative", but not very standard approach).
This patch:
- Removes the special error-types, replacing them with errdefs definitions (which
is a more common approach in our code-base to detect error types / classes).
- Removes the internal utilities for error-handling, and deprecates the exported
utilities (to allow external consumers to adjust their code).
- Some errors have been enriched with detailed information (which may be useful
for debugging / problem solving).
- Note that in some cases, `patchErrContextName()` was called, but the code
producing the error would never return a `setContextName` error, so would
never update the error message.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, running `docker context rm --force` would fail if the context
did not exist. This behavior was different from other commands, which allowed
ignoring non-existing objects.
For example; when trying to remove a non-existing volume, the command would
fail without "force":
```bash
docker volume rm nosuchvolume
Error: No such volume: nosuchvolume
echo $?
1
```
But using the `-f` / `--force` option would make the command complete successfully
(the error itself is still printed for informational purposes);
```bash
docker volume rm -f nosuchvolume
nosuchvolume
echo $?
0
```
With this patch, `docker context rm` behaves the same:
```bash
docker context rm nosuchcontext
context "nosuchcontext" does not exist
echo $?
1
```
```bash
docker context rm -f nosuchcontext
nosuchcontext
echo $?
0
```
This patch also simplifies how we check if the context exists; previously we
would try to read the context's metadata; this could fail if a context was
corrupted, or if an empty directory was present. This patch now only checks
if the directory exists, without first validating the context's data.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also removing redundant defer for env.PatchAll(), which is now automatically
handled in t.Cleanup()
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/container/opts.go:928:2: assigned to src, but reassigned without using the value (wastedassign)
src := ""
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While fixing, also updated errors without placeholders to `errors.New()`, and
updated some code to use pkg/errors if it was already in use in the file.
cli/command/config/inspect.go:59:10: ST1005: error strings should not be capitalized (stylecheck)
return fmt.Errorf("Cannot supply extra formatting options to the pretty template")
^
cli/command/node/inspect.go:61:10: ST1005: error strings should not be capitalized (stylecheck)
return fmt.Errorf("Cannot supply extra formatting options to the pretty template")
^
cli/command/secret/inspect.go:57:10: ST1005: error strings should not be capitalized (stylecheck)
return fmt.Errorf("Cannot supply extra formatting options to the pretty template")
^
cli/command/trust/common.go:77:74: ST1005: error strings should not be capitalized (stylecheck)
return []trustTagRow{}, []client.RoleWithSignatures{}, []data.Role{}, fmt.Errorf("No signatures or cannot access %s", remote)
^
cli/command/trust/common.go:85:73: ST1005: error strings should not be capitalized (stylecheck)
return []trustTagRow{}, []client.RoleWithSignatures{}, []data.Role{}, fmt.Errorf("No signers for %s", remote)
^
cli/command/trust/sign.go:137:10: ST1005: error strings should not be capitalized (stylecheck)
return fmt.Errorf("No tag specified for %s", imgRefAndAuth.Name())
^
cli/command/trust/sign.go:151:19: ST1005: error strings should not be capitalized (stylecheck)
return *target, fmt.Errorf("No tag specified")
^
cli/command/trust/signer_add.go:77:10: ST1005: error strings should not be capitalized (stylecheck)
return fmt.Errorf("Failed to add signer to: %s", strings.Join(errRepos, ", "))
^
cli/command/trust/signer_remove.go:52:10: ST1005: error strings should not be capitalized (stylecheck)
return fmt.Errorf("Error removing signer from: %s", strings.Join(errRepos, ", "))
^
cli/command/trust/signer_remove.go:67:17: ST1005: error strings should not be capitalized (stylecheck)
return false, fmt.Errorf("All signed tags are currently revoked, use docker trust sign to fix")
^
cli/command/trust/signer_remove.go:108:17: ST1005: error strings should not be capitalized (stylecheck)
return false, fmt.Errorf("No signer %s for repository %s", signerName, repoName)
^
opts/hosts.go:89:14: ST1005: error strings should not be capitalized (stylecheck)
return "", fmt.Errorf("Invalid bind address format: %s", addr)
^
opts/hosts.go💯14: ST1005: error strings should not be capitalized (stylecheck)
return "", fmt.Errorf("Invalid proto, expected %s: %s", proto, addr)
^
opts/hosts.go:119:14: ST1005: error strings should not be capitalized (stylecheck)
return "", fmt.Errorf("Invalid proto, expected tcp: %s", tryAddr)
^
opts/hosts.go:144:14: ST1005: error strings should not be capitalized (stylecheck)
return "", fmt.Errorf("Invalid bind address format: %s", tryAddr)
^
opts/hosts.go:155:14: ST1005: error strings should not be capitalized (stylecheck)
return "", fmt.Errorf("Invalid bind address format: %s", tryAddr)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We try to keep this package close to upstream golang's code, so suppress the
linter warning.
cli/command/formatter/tabwriter/tabwriter.go:200:1: ST1020: comment on exported method Init should be of the form "Init ..." (stylecheck)
// A Writer must be initialized with a call to Init. The first parameter (output)
^
cli/command/formatter/tabwriter/tabwriter.go:425:1: ST1022: comment on exported const Escape should be of the form "Escape ..." (stylecheck)
// To escape a text segment, bracket it with Escape characters.
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/cli_options_test.go:29:2: os.Setenv() can be replaced by `t.Setenv()` in TestWithContentTrustFromEnv (tenv)
os.Setenv(envvar, "true")
^
cli/command/cli_options_test.go:31:2: os.Setenv() can be replaced by `t.Setenv()` in TestWithContentTrustFromEnv (tenv)
os.Setenv(envvar, "false")
^
cli/command/cli_options_test.go:33:2: os.Setenv() can be replaced by `t.Setenv()` in TestWithContentTrustFromEnv (tenv)
os.Setenv(envvar, "invalid")
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/manifest/inspect_test.go:9:2: ST1019: package "github.com/docker/cli/cli/manifest/types" is being imported more than once (stylecheck)
"github.com/docker/cli/cli/manifest/types"
^
cli/command/manifest/inspect_test.go:10:2: ST1019(related information): other import of "github.com/docker/cli/cli/manifest/types" (stylecheck)
manifesttypes "github.com/docker/cli/cli/manifest/types"
^
cli/command/stack/swarm/deploy_composefile.go:14:2: ST1019: package "github.com/docker/docker/client" is being imported more than once (stylecheck)
apiclient "github.com/docker/docker/client"
^
cli/command/stack/swarm/deploy_composefile.go:15:2: ST1019(related information): other import of "github.com/docker/docker/client" (stylecheck)
dockerclient "github.com/docker/docker/client"
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/image/build/context.go:238:23: "400" can be replaced by http.StatusBadRequest (usestdlibvars)
if resp.StatusCode < 400 {
^
cli/trust/trust.go:139:30: "GET" can be replaced by http.MethodGet (usestdlibvars)
req, err := http.NewRequest("GET", endpointStr, nil)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Having the intermediate variable made it difficult to see if it was
possibly mutated and/or something special done with it, so just use
the cli's accessors to get its Err().
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
As it's just an alias for filepath.IsAbs. Also added a normalize step in
TrimBuildFilesFromExcludes, so that callers are not _required_ to first
normalize the path.
We are considering deprecating and/or removing this function in the archive
package, so removing it in the cli code helps transitioning if we decide to
deprecate and/or remove it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`NewDockerCli` was configuring the standard streams using local code; this patch
instead uses the available `WithStandardStreams()` option to do the same.
There is slight difference in the order of events;
Previously, user-provided options would be applied first, after which NewDockerCli
would check if any of "in", "out", or "err" were nil, and if so set them to the
default stream (or writer) for that output.
The new code unconditionally sets the defaults _before_ applying user-provided
options. In practive, howver, this makes no difference; the fields set are not
exported, and the only functions updating them are `WithStandardStreams`,
`WithInputStream`, and `WithCombinedStream`, neither of which checks the old
value (so always overrides).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Migrating these functions to allow them being shared between moby, docker/cli,
and containerd, and to allow using them without importing all of sys / system,
which (in containerd) also depends on hcsshim and more.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- moby: a60b458179...d2590dc3cd
- swarmkit: 6068d1894d...48dd89375d
The .Parent field for buildcache entries was deprecated, and replaced with a
.Parents (plural) field. This patch updates the code accordingly. Unlike the
change in buildx
9c3be32bc9
we continue to fall back to the old field (which will be set on older API
versions).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Note that this does not fully fix the referenced issue, but
at least makes sure that API clients don't hang forever on
the initialization step.
See: https://github.com/docker/cli/issues/3652
Signed-off-by: Nick Santos <nick.santos@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Avoid updating the config-file if nothing changed. This also prevents creating
the file and config-directory if the default is used and no config-file existed
yet.
`config.Save()` performs various steps (creating the directory, updating
or copying permissions, etc etc), which are not needed if the defaults are
used; a445d97c25/cli/config/configfile/file.go (L135-L176)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This code was handling validation and parsing, only to discard the
results if it was the default context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go do not format these comments, so we can already
reformat them ahead of time to prevent gofmt linting failing once
we update to Go 1.19 or up.
Result of:
gofmt -s -w $(find . -type f -name '*.go' | grep -v "/vendor/")
With some manual adjusting.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Cobra allows for aliases to be defined for a command, but only allows these
to be defined at the same level (for example, `docker image ls` as alias for
`docker image list`). Our CLI has some commands that are available both as a
top-level shorthand as well as `docker <object> <verb>` subcommands. For example,
`docker ps` is a shorthand for `docker container ps` / `docker container ls`.
This patch introduces a custom "aliases" annotation that can be used to print
all available aliases for a command. While this requires these aliases to be
defined manually, in practice the list of aliases rarely changes, so maintenance
should be minimal.
As a convention, we could consider the first command in this list to be the
canonical command, so that we can use this information to add redirects in
our documentation in future.
Before this patch:
docker images --help
Usage: docker images [OPTIONS] [REPOSITORY[:TAG]]
List images
Options:
-a, --all Show all images (default hides intermediate images)
...
With this patch:
docker images --help
Usage: docker images [OPTIONS] [REPOSITORY[:TAG]]
List images
Aliases:
docker image ls, docker image list, docker images
Options:
-a, --all Show all images (default hides intermediate images)
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, specifying the `--pull` flag without a value, could
result in the flag after it, or the positional argument to be used as
value.
This patch makes sure that the value is an expected value;
docker create --pull --rm hello-world
docker: invalid pull option: '--rm': must be one of "always", "missing" or "never".
docker run --pull --rm hello-world
docker: invalid pull option: '--rm': must be one of "always", "missing" or "never".
docker run --pull hello-world
docker: invalid pull option: 'hello-world': must be one of "always", "missing" or "never".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- do an early check if a custom format is specified either through the
command-line, or through the cli's configuration, before adjusting
the options (to add "size" if needed).
- also removes a redundant `options.Size = opts.size` line, as this value is
already copied at the start of buildContainerListOptions()
- Update NewContainerFormat to use "table" format as a default if no format
was given.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Phong Tran <tran.pho@northeastern.edu>
Ths prettyPrintServerInfo() was checking for the Labels property to be
nil, but didn't check for empty slices.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add Secret sorting prior to request to prevent flakiness in CI
Signed-off-by: Phong Tran <tran.pho@northeastern.edu>
Co-authored-by: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: Phong Tran <tran.pho@northeastern.edu>
This updates the pretty-print format of docker info to provide more
details on installed plugins, to help users find where a specific
plugin is installed (e.g. to update it, or to uninstall it).
Before this patch:
```bash
Client:
Context: desktop-linux
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc., v0.8.2)
compose: Docker Compose (Docker Inc., v2.4.1)
sbom: View the packaged-based Software Bill Of Materials (SBOM) for an image (Anchore Inc., 0.6.0)
scan: Docker Scan (Docker Inc., v0.17.0)
Server:
...
```
With this patch applied:
```bash
docker info
Client:
Context: desktop-linux
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.8.2
Path: /usr/local/lib/docker/cli-plugins/docker-buildx
compose: Docker Compose (Docker Inc.)
Version: v2.4.1
Path: /usr/local/lib/docker/cli-plugins/docker-compose
sbom: View the packaged-based Software Bill Of Materials (SBOM) for an image (Anchore Inc.)
Version: 0.6.0
Path: /usr/local/lib/docker/cli-plugins/docker-sbom
scan: Docker Scan (Docker Inc.)
Version: v0.17.0
Path: /usr/local/lib/docker/cli-plugins/docker-scan
Server:
...
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes the containers have an expected console size not only for
`run` but also for `create`. Also remove the comment, as this is no
longer ignored on Linux daemon since e994efcf64c133de799f16f5cd6feb1fc41fade4
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Wording and documentation still need to be updated, but will do
so in a follow-up.
Also removing the default "10 seconds" from the timeout flags, as
this default is not actually used, and may not match the actual
default (which is defined on the daemon side).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Formatting stats runs in a loop to refresh the stats for each container. This
patch makes some small performance improvments by reducing the use of Sprintf
in favor of concatenating strings, and using strconv directly where possible.
Benchmark can be run with:
GO111MODULE=off go test -test.v -test.bench '^BenchmarkStatsFormat' -test.run '^$' ./cli/command/container/
Before/after:
BenchmarkStatsFormatOld-8 2655 428064 ns/op 62432 B/op 5600 allocs/op
BenchmarkStatsFormat-8 3338 335822 ns/op 52832 B/op 4700 allocs/op
Average of 5 runs;
benchstat old.txt new.txt
name old time/op new time/op delta
StatsFormat-8 432µs ± 1% 344µs ± 5% -20.42% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
StatsFormat-8 62.4kB ± 0% 52.8kB ± 0% -15.38% (p=0.000 n=5+4)
name old allocs/op new allocs/op delta
StatsFormat-8 5.60k ± 0% 4.70k ± 0% -16.07% (p=0.008 n=5+5)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/container/hijack.go:188:1⚠️ nolint directive did not match any issue (nolint)
cli/command/image/trust.go:346:1⚠️ nolint directive did not match any issue (nolint)
cli/command/manifest/push.go:211:1⚠️ nolint directive did not match any issue (nolint)
cli/command/trust/signer_remove.go:79:1⚠️ nolint directive did not match any issue (nolint)
internal/pkg/containerized/snapshot.go:95:1⚠️ nolint directive did not match any issue (nolint)
internal/pkg/containerized/snapshot.go:138:1⚠️ nolint directive did not match any issue (nolint)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This hides the flags when connecting to an older engine, or if
swarm is not enabled, and is also used to add badges in the
documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Prevent completion on "create" subcommands to prevent them
from completing with local filenames
- Add completion for "docker image save"
- Add completion for "docker image tag"
- Disable completion for "docker login"
- Exclude "paused" containers for "docker container attach" and
"docker container exec"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch, the Server output would be printed even if we failed to
connect (including WARNINGS):
```bash
docker -H tcp://127.0.0.1:2375 info
Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?
Client:
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc., v0.8.2)
compose: Docker Compose (Docker Inc., v2.4.1)
sbom: View the packaged-based Software Bill Of Materials (SBOM) for an image (Anchore Inc., 0.6.0)
scan: Docker Scan (Docker Inc., v0.17.0)
Server:
Containers: 0
Running: 0
Paused: 0
Stopped: 0
Images: 0
Plugins:
Volume:
Network:
Log:
Swarm:
NodeID:
Is Manager: false
Node Address:
CPUs: 0
Total Memory: 0B
Docker Root Dir:
Debug Mode: false
Experimental: false
Live Restore Enabled: false
WARNING: No memory limit support
WARNING: No swap limit support
WARNING: No oom kill disable support
WARNING: No cpu cfs quota support
WARNING: No cpu cfs period support
WARNING: No cpu shares support
WARNING: No cpuset support
WARNING: IPv4 forwarding is disabled
WARNING: bridge-nf-call-iptables is disabled
WARNING: bridge-nf-call-ip6tables is disabled
ERROR: Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?
errors pretty printing info
```
With this patch;
```bash
docker -H tcp://127.0.0.1:2375 info
Client:
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc., v0.8.2)
compose: Docker Compose (Docker Inc., v2.4.1)
sbom: View the packaged-based Software Bill Of Materials (SBOM) for an image (Anchore Inc., 0.6.0)
scan: Docker Scan (Docker Inc., v0.17.0)
Server:
ERROR: Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?
errors pretty printing info
```
And if a custom format is used:
```bash
docker -H tcp://127.0.0.1:2375 info --format '{{.Containers}}'
Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?
0
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, the function could print an error in some cases, for example;
```bash
docker -H tcp://127.0.0.1:2375 info --format '{{.LoggingDriver}}'
template: :1:2: executing "" at <.LoggingDriver>: reflect: indirection through nil pointer to embedded struct field Info
```
With this patch applied, the error is handled gracefully, and when failing to
connect with the daemon, the error is logged;
```bash
docker -H tcp://127.0.0.1:2375 info --format '{{.LoggingDriver}}'
Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?
docker -H tcp://127.0.0.1:2375 info --format '{{json .}}'
Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?
{"ID":"","Containers":0,"..."}}
```
Note that the connection error is also included in the JSON `ServerErrors` field,
so that the information does not get lost, even if STDERR would be redirected;
```bash
docker -H tcp://127.0.0.1:2375 info --format '{{json .ServerErrors}}' 2> /dev/null
["Cannot connect to the Docker daemon at tcp://127.0.0.1:2375. Is the docker daemon running?"]
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test is very flaky, the retry loop runs for 550ms and some more, 750ms is
cleary not enough for everything to set and for the cli to return the tty resize
error. A sleep of 1.5 seconds in this test should be enough for the retry loop to
finish.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
I some cases, for example if there is a heavy load, the initialization of the TTY size
would fail. This change makes the cli retry 10 times instead of 5 and we wait
incrementally from 10ms to 100ms
Relates to #3554
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
These annotations were added because these options were not supported
when using kubernetes as an orchestrator. Now that this feature was
removed, we can remove these annotations.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: 616e8db4c3...6068d1894d
a replace rule was needed (similar as in github.com/docker/docker) to fix some
dependency issues;
github.com/docker/cli/cli/trust imports
github.com/theupdateframework/notary/trustpinning tested by
github.com/theupdateframework/notary/trustpinning.test imports
github.com/cloudflare/cfssl/helpers imports
github.com/google/certificate-transparency-go imports
go.etcd.io/etcd/v3 imports
go.etcd.io/etcd/tests/v3/integration imports
go.etcd.io/etcd/server/v3/embed imports
go.opentelemetry.io/otel/semconv: module go.opentelemetry.io/otel@latest found (v1.7.0), but does not contain package go.opentelemetry.io/otel/semconv
github.com/docker/cli/cli/trust imports
github.com/theupdateframework/notary/trustpinning tested by
github.com/theupdateframework/notary/trustpinning.test imports
github.com/cloudflare/cfssl/helpers imports
github.com/google/certificate-transparency-go imports
go.etcd.io/etcd/v3 imports
go.etcd.io/etcd/tests/v3/integration imports
go.etcd.io/etcd/server/v3/embed imports
go.opentelemetry.io/otel/exporters/otlp imports
go.opentelemetry.io/otel/sdk/metric/controller/basic imports
go.opentelemetry.io/otel/metric/registry: module go.opentelemetry.io/otel/metric@latest found (v0.30.0), but does not contain package go.opentelemetry.io/otel/metric/registry
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The code is similar to that used by the volume rm subcommand, however,
one difference I noticed was VolumeRemove takes the force flag/option
was a parameter. This isn't the case for NetworkRemove.
To get NetworkRemove to take a similar parameter, this would require
modifying the Docker daemon. For now this isn't a route I wish to take
when the code can be arrange to mimic the same behavior.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Conner Crosby <conner@cavcrosby.tech>
pkg/urlutil (despite its poorly chosen name) is not really intended as a
generic utility to handle URLs, and should only be used by the builder to
handle (remote) build contexts.
The `IsURL()` function only does a very rudimentary check for `http(s)://`
prefixes, without any other validation, but due to its name may give
incorrect expectations.
As we're deprecating this package for uses other than for build-contexts,
this patch replaces this instance of the utility for a local function.
While changing, also cleaned up some intermediate variables, and made
the logic slightly more descriptive.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This check doesn't really make sense because the client doesn't know on what
OS the daemon is really running.
The daemon uses the console size on creation when available (on windows).
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
This adds a new annotation to commands that are known to be frequently
used, and allows setting a custom weight/order for these commands to
influence in what order they appear in the --help output.
I'm not entirely happy with the implementation (we could at least use
some helpers for this, and/or make it more generic to group commands
in output), but it could be a start.
For now, limiting this to only be used for the top-level --help, but
we can expand this to subcommands as well if we think it makes sense
to highlight "common" / "commonly used" commands.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These commands are commonly used, so removing them from the list of "legacy"
top-level commands that are hidden when setting DOCKER_HIDE_LEGACY_COMMANDS=1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This groups all swarm-related subcommands to their own section in the --help
output, to make it clearer which commands require swarm to be enabled
With this change:
Usage: docker [OPTIONS] COMMAND
A self-sufficient runtime for containers
Options:
--config string Location of client config files (default "/Users/sebastiaan/.docker")
-c, --context string Name of the context to use to connect to the daemon (overrides DOCKER_HOST env var and default context set with "docker context use")
-D, --debug Enable debug mode
-H, --host list Daemon socket(s) to connect to
-l, --log-level string Set the logging level ("debug"|"info"|"warn"|"error"|"fatal") (default "info")
--tls Use TLS; implied by --tlsverify
--tlscacert string Trust certs signed only by this CA (default "/Users/sebastiaan/.docker/ca.pem")
--tlscert string Path to TLS certificate file (default "/Users/sebastiaan/.docker/cert.pem")
--tlskey string Path to TLS key file (default "/Users/sebastiaan/.docker/key.pem")
--tlsverify Use TLS and verify the remote
-v, --version Print version information and quit
Management Commands:
builder Manage builds
buildx* Docker Buildx (Docker Inc., v0.8.1)
checkpoint Manage checkpoints
completion Generate the autocompletion script for the specified shell
compose* Docker Compose (Docker Inc., v2.3.3)
container Manage containers
context Manage contexts
image Manage images
manifest Manage Docker image manifests and manifest lists
network Manage networks
plugin Manage plugins
scan* Docker Scan (Docker Inc., v0.17.0)
system Manage Docker
trust Manage trust on Docker images
volume Manage volumes
Orchestration Commands:
config Manage Swarm configs
node Manage Swarm nodes
secret Manage Swarm secrets
service Manage Swarm services
stack Manage Swarm stacks
swarm Manage Swarm
Commands:
attach Attach local standard input, output, and error streams to a running container
build Build an image from a Dockerfile
commit Create a new image from a container's changes
cp Copy files/folders between a container and the local filesystem
create Create a new container
diff Inspect changes to files or directories on a container's filesystem
events Get real time events from the server
exec Run a command in a running container
export Export a container's filesystem as a tar archive
history Show the history of an image
images List images
import Import the contents from a tarball to create a filesystem image
info Display system-wide information
inspect Return low-level information on Docker objects
kill Kill one or more running containers
load Load an image from a tar archive or STDIN
login Log in to a Docker registry
logout Log out from a Docker registry
logs Fetch the logs of a container
pause Pause all processes within one or more containers
port List port mappings or a specific mapping for the container
ps List containers
pull Pull an image or a repository from a registry
push Push an image or a repository to a registry
rename Rename a container
restart Restart one or more containers
rm Remove one or more containers
rmi Remove one or more images
run Run a command in a new container
save Save one or more images to a tar archive (streamed to STDOUT by default)
search Search the Docker Hub for images
start Start one or more stopped containers
stats Display a live stream of container(s) resource usage statistics
stop Stop one or more running containers
tag Create a tag TARGET_IMAGE that refers to SOURCE_IMAGE
top Display the running processes of a container
unpause Unpause all processes within one or more containers
update Update configuration of one or more containers
version Show the Docker version information
wait Block until one or more containers stop, then print their exit codes
Run 'docker COMMAND --help' for more information on a command.
To get more help with docker, check out our guides at https://docs.docker.com/go/guides/
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Configuration (enabling/disabling) of Experimental client features
was deprecated in Docker 19.03, and removed in 20.10. Experimental
CLI features are now always enabled. In Docker 20.10, the Experimental
field in `docker version` was kept (but always true).
This patch removes the field from the output (both "pretty" output
and the JSON struct).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make use of existing modules and functions in order to output the merged configs.
Added skip interpolation flag of variables, so that you can pipe the output back to stack deploy without much hassle.
Signed-off-by: Stoica-Marcu Floris-Andrei <floris.sm@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These warnings were for features that are no longer supported (overlay
on a backingFS without d_type support), or related to the deprecated
devicemapper storage driver.
Removing this function for that reason.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove "Docker" from registry, as the registry specification is no
longer docker-specific, but part of the OCI distribution spec.
Also removed "Register" from one of the docs pages, as the login
command hasn't supported creating a new acccount on Docker Hub for
a long time.
I'm wondering if we should be more explicit about what log in / out
does (effectively; authenticate, and on success store the credentials
or token, and on log out; remove credentials/token).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test uses two subtests that were sharing the same variable.
Subtests run in a goroutine, which could lead to them concurrently
accessing the variable, resulting in a panic:
=== FAIL: cli/command/container TestRemoveForce/without_force (0.00s)
Error: Error: No such container: nosuchcontainer
--- FAIL: TestRemoveForce/without_force (0.00s)
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x40393f]
goroutine 190 [running]:
testing.tRunner.func1.2({0xb76380, 0x124c9a0})
/usr/local/go/src/testing/testing.go:1389 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1392 +0x39f
panic({0xb76380, 0x124c9a0})
/usr/local/go/src/runtime/panic.go:838 +0x207
sort.StringSlice.Less(...)
/usr/local/go/src/sort/sort.go:319
sort.insertionSort({0xd87380, 0xc00051b3b0}, 0x0, 0x2)
/usr/local/go/src/sort/sort.go:40 +0xb1
sort.quickSort({0xd87380, 0xc00051b3b0}, 0x18?, 0xb4f060?, 0xc000540e01?)
/usr/local/go/src/sort/sort.go:222 +0x171
sort.Sort({0xd87380, 0xc00051b3b0})
/usr/local/go/src/sort/sort.go:231 +0x53
sort.Strings(...)
/usr/local/go/src/sort/sort.go:335
github.com/docker/cli/cli/command/container.TestRemoveForce.func2(0xc0005389c0?)
/go/src/github.com/docker/cli/cli/command/container/rm_test.go:36 +0x125
testing.tRunner(0xc00053e4e0, 0xc00051b140)
/usr/local/go/src/testing/testing.go:1439 +0x102
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1486 +0x35f
=== FAIL: cli/command/container TestRemoveForce (0.00s)
This patch changes the test to use to separate variables.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in fd2f1b3b66 as part of
the `docker engine` sub-commands, which were deprecated, and removed in
43b2f52d0c.
This function is not used by anyone, so safe to remove.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's slightly more verbose, but helps finding the purpose of each
of the environment variables. In tests, I kept the fixed strings.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon (and registry) already have a default limit. This patch
removes the default from the client side, to not duplicate setting
these defaults.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were creating a stub container, using the current timestamp as
created date. However, if CI was slow to run the test, `Less than a second ago`
would change into `1 second ago`, causing the test to fail:
--- FAIL: TestContainerListNoTrunc (0.00s)
list_test.go:198: assertion failed:
--- expected
+++ actual
@@ -1,4 +1,4 @@
-CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
-container_id busybox:latest "top" Less than a second ago Up 1 second c1
-container_id busybox:latest "top" Less than a second ago Up 1 second c2,foo/bar
+CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+container_id busybox:latest "top" 1 second ago Up 1 second c1
+container_id busybox:latest "top" 1 second ago Up 1 second c2,foo/bar
This patch changes the "created" time of the container to be a minute ago. This
will result in `About a minute ago`, with a margin of 1 minute.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- updated the default value for `--limit` on `docker search` as the const has been
removed (added a todo to remove it)
- updated some fixtures to account for `KernelMemoryTCP` no longer being included
in the output.
full diff: 83b51522df...8941dcfcc5
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/compose/interpolation/interpolation.go:102:4: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
"invalid interpolation format for %s: %#v. You may need to escape any $ with another $.",
^
cli/command/stack/loader/loader.go:30:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return nil, errors.Errorf("Compose file contains unsupported options:\n\n%s\n",
^
cli/command/formatter/formatter.go:76:30: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return tmpl, errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/formatter/formatter.go:97:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Template parsing error: %v\n", err)
^
cli/command/image/build.go:257:25: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("error checking context: '%s'.", err)
^
cli/command/volume/create.go:35:27: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("Conflicting options: either specify --name or provide positional arg, not both\n")
^
cli/command/container/create.go:160:24: error-strings: error strings should not be capitalized or end with punctuation or a newline (revive)
return errors.Errorf("failed to remove the CID file '%s': %s \n", cid.path, err)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The CLI currenly calls the `/info` endpoint to get the address
of the default registry to use.
This functionality was added as part of the initial Windows implementation
of the engine. For legal reasons, Microsoft Windows (and thus Docker images
based on Windows) were not allowed to be distributed through non-Microsoft
infrastructure. As a temporary solution, a dedicated "registry-win-tp3.docker.io"
registry was created to serve Windows images.
As a result, the default registry was no longer "fixed", so a helper function
(`ElectAuthServer`) was added to allow the CLI to get the correct registry
address from the daemon. (docker/docker PR's/issues 18019, 19891, 19973)
Using separate registries was not an ideal solution, and a more permanent
solution was created by introducing "foreign image layers" in the distribution
spec, after which the "registry-win-tp3.docker.io" ceased to exist, and
removed from the engine through docker/docker PR 21100.
However, the `ElectAuthServer` was left in place, quoting from that PR;
> make the client check which default registry the daemon uses is still
> more correct than leaving it up to the client, even if it won't technically
> matter after this PR. There may be some backward compatibility scenarios
> where `ElectAuthServer` [sic] is still helpful.
That comment was 5 years ago, and given that the engine and cli are
released in tandem, and the default registry is not configurable, we
can save the extra roundtrip to the daemon by using a fixed value.
This patch deprecates the `ElectAuthServer` function, and makes it
return the default registry without calling (potentially expensie)
`/info` API endpoint.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this change all `inspect` commands will output a compact JSON
representation of the elements, the default format (indented JSON) stays the
same.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
including all the directives and a link to the documentation.
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Once upon a time, there was a website named ["The Docker index"][2]; a complimentary
service for users of Docker, provided by dotCloud. The Docker Index was the place
to find and explore pre-made container images, and allowed you to [share your
images and download them][1]. The Docker Index evolved rapidly, and gained new
features, such as [Trusted Images][3], and "stars" to rank your favorite images.
The website also provided an API, which allowed you to search images, even from
the comfort of your `docker` CLI. Things moved fast in container-land, and while
there was an API to use, it was still a work in progress. While the Docker Index
allowed users to "star" images, the search API did not rank results accordingly.
As any engineer knows, there's no problem that can't be solved with some elbow-
grease and a piece of Duct tape, so while the Docker Index team worked on making
the search API better, the `docker` engine [fixed the problem on the client side][4]
Years went by, and the Docker Index API became the "registry V1" specification,
including search. The registry got a major "v2" rewrite and became the [OCI Distribution
Spec][5], and Docker Index became Docker Hub, which included V2 and V3 search APIs.
The V1 search API continued to be supported, as it was the only documented API
for registries, but improvements were made, including ranking of search results.
Duct tape is durable, and even though improvements were made, the Docker client
continued to sort the results as well. Unfortunately, this meant that search
results on the command-line were ranked different from their equivalent on the
registry (such as Docker Hub).
This patch removes the client-side sorting of results, using the order in which
the search API returned them to (finally) celebrate the work of the engineers
working on the search API, also when used from the command-line.
[1]: https://web.archive.org/web/20130708004229/http://docker.io/
[2]: https://web.archive.org/web/20130623223614/https://index.docker.io/
[3]: https://web.archive.org/web/20140208001647/https://index.docker.io/
[4]: 1669b802cc
[5]: https://github.com/opencontainers/distribution-spec
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this change it is now possible to give a relative path to the --volume and
--mount flags.
$ docker run --mount type=bind,source=./,target=/test ...
$ docker run -v .:/test ...
Fixes#1203
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Changed `matcher.Matches(file)` to `matcher.MatchesOrParentMatches(file)`:
cli/command/image/build/context.go:95:9: SA1019: matcher.Matches is deprecated: This implementation is buggy (it only checks a single parent dir against the pattern) and will be removed soon. Use either MatchesOrParentMatches or MatchesUsingParentResults instead. (staticcheck)
return matcher.Matches(file)
^
And updated a test to match the JSON omitting empty RootFS.Type fields (in
practice, this field should never be empty in real situations, and always
be "layer"). Changed the test to use subtests to easier find which case
is failing.
full diff: 343665850e...83b51522df
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The information in this struct was basically fixed (there's
some discrepancy around the "DefaultVersion" which, probably,
should never vary, and always be set to the Default (maximum)
API version supported by the client.
Experimental is now always enabled, so this information did
not require any dynamic info as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was there for historic reasons (I think `goimports` expected this,
and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Not a fan of aliases, but unfortunately they're sometimes needed. We import both
docker/docker/registry and docker/registry and api/types/registry, so I looked
for which one to continue using an alias, and this was the one "least" used,
and which already used this alias everywhere, except for two places.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Just `config` as name for the package should work; this also revealed that one
file was importing the same package twice.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Brian Goff
Sebastiaan van Stijn
Sebastiaan van Stijn
Paweł Gronowski
Laura Brehm
Cory Snider
Akihiro Suda
Justin Chadwell
CrazyMax
Jason Hall
Nick Santos
Nick Santos
Phong Tran
Drew Erny
Nicolas De Loof
teivah
Djordje Lukic
Conner Crosby
Stoica-Marcu Floris-Andrei
Silvin Lubecki
Gleb Stsenov