These warnings were for features that are no longer supported (overlay
on a backingFS without d_type support), or related to the deprecated
devicemapper storage driver.
Removing this function for that reason.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
My IDE's linter kept complaining:
> For compatibility reasons all table rows should have borders (pipe
> symbols) at the start and at the end.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We should consider removing this file, but it's still used in some
scripts, so let's keep that one for later.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `~/.dockercfg` file was replaced by `~/.docker/config.json` in 2015
(github.com/docker/docker/commit/18c9b6c6455f116ae59cde8544413b3d7d294a5e),
but the CLI still falls back to checking if this file exists if no current
(`~/.docker/config.json`) file was found.
Given that no version of the CLI since Docker v1.7.0 has created this file,
and if such a file exists, it means someone hasn't re-authenticated for
5 years, it's probably safe to remove this fallback.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some commands in the output of `docker` show up with an asterisk, like
app, build, buildx or scan. This tweak removes that so that the
asterisk is not filled in when choosing those commands.
Signed-off-by: Marc Cornellà <hello@mcornella.com>
This change allows some make targets to be ran outside the dev-container for
easier discovery and use:
- `make clean` can be used on the host (as artifacts created from within the
development container are usually stored on the host).
- `make help` was already allowed
- `make dev` and `make shell` are added to the regular Makefile, to make it
easier to create and start the development container.
- When attempting to run `make dev` from within the development container, a
message is printed, and the target is cancelled:
root@docker-cli-dev$ make dev
you are already in the dev container
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes some minor improvments to the dev container:
- add `nano` as an alternative to `vi` to help beginning contributors, or people
that don't remember how to quit `vi` ;-)
- add `jq` as it's often handy to have available to debug JSON output.
- set a custom prompt to make it clearer that the user is in a container
- add a short MOTD that shows that the user is in a container, and a pointer
to 'make help' (we can add more help/instructions to this MOTD in future).
Before this patch:
make -f docker.Makefile dev
...
bash-5.1#
With this patch:
make -f docker.Makefile dev
...
You are now in a development container. Run 'make help' to learn about
available make targets.
root@docker-cli-dev$
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was introduced in 9d40c7464e, which added
support for `SOURCE_DATE_EPOCH` to override the build-time.
macOS uses the BSD flavor of `date`, which does not support the `--date` option
to set a custom time.
Before this:
DISABLE_WARN_OUTSIDE_CONTAINER=1 make binary
./scripts/build/binary
date: illegal option -- -
usage: date [-jnRu] [-d dst] [-r seconds] [-t west] [-v[+|-]val[ymwdHMS]] ...
[-f fmt date | [[[mm]dd]HH]MM[[cc]yy][.ss]] [+format]
After this:
DISABLE_WARN_OUTSIDE_CONTAINER=1 make binary
./scripts/build/binary
Building static docker-darwin-amd64
+ go build -o build/docker-darwin-amd64 -tags ' osusergo pkcs11' -ldflags ' -w -X "github.com/docker/cli/cli/version.GitCommit=a4b6fe16a" -X "github.com/docker/cli/cli/version.BuildTime=2022-04-06T10:57:25Z" -X "github.com/docker/cli/cli/version.Version=20.10.2-589-ga4b6fe16a.m"' -buildmode=pie github.com/docker/cli/cmd/docker
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove "Docker" from registry, as the registry specification is no
longer docker-specific, but part of the OCI distribution spec.
Also removed "Register" from one of the docs pages, as the login
command hasn't supported creating a new acccount on Docker Hub for
a long time.
I'm wondering if we should be more explicit about what log in / out
does (effectively; authenticate, and on success store the credentials
or token, and on log out; remove credentials/token).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
release notes: https://github.com/docker/buildx/releases/tag/v0.8.2
Notable changes:
- Update Compose spec used by buildx bake to v1.2.1 to fix parsing ports definition
- Fix possible crash on handling progress streams from BuildKit v0.10
- Fix parsing groups in buildx bake when already loaded by a parent group
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was introduced in 41a5e0e4df, and
having the trailing whitespace causes the yamldocs generator to
switch to "compact" formatting, which makes that yaml hard to read.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test uses two subtests that were sharing the same variable.
Subtests run in a goroutine, which could lead to them concurrently
accessing the variable, resulting in a panic:
=== FAIL: cli/command/container TestRemoveForce/without_force (0.00s)
Error: Error: No such container: nosuchcontainer
--- FAIL: TestRemoveForce/without_force (0.00s)
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x40393f]
goroutine 190 [running]:
testing.tRunner.func1.2({0xb76380, 0x124c9a0})
/usr/local/go/src/testing/testing.go:1389 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1392 +0x39f
panic({0xb76380, 0x124c9a0})
/usr/local/go/src/runtime/panic.go:838 +0x207
sort.StringSlice.Less(...)
/usr/local/go/src/sort/sort.go:319
sort.insertionSort({0xd87380, 0xc00051b3b0}, 0x0, 0x2)
/usr/local/go/src/sort/sort.go:40 +0xb1
sort.quickSort({0xd87380, 0xc00051b3b0}, 0x18?, 0xb4f060?, 0xc000540e01?)
/usr/local/go/src/sort/sort.go:222 +0x171
sort.Sort({0xd87380, 0xc00051b3b0})
/usr/local/go/src/sort/sort.go:231 +0x53
sort.Strings(...)
/usr/local/go/src/sort/sort.go:335
github.com/docker/cli/cli/command/container.TestRemoveForce.func2(0xc0005389c0?)
/go/src/github.com/docker/cli/cli/command/container/rm_test.go:36 +0x125
testing.tRunner(0xc00053e4e0, 0xc00051b140)
/usr/local/go/src/testing/testing.go:1439 +0x102
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1486 +0x35f
=== FAIL: cli/command/container TestRemoveForce (0.00s)
This patch changes the test to use to separate variables.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When building on Fedora 36, the build failed. I suspect this is because the
rpm tools also set LDFLAGS, but with options that cannot be used;
GO_LINKMODE=dynamic
+ ./scripts/build/binary
/go/src/github.com/docker/cli ~/rpmbuild/BUILD/src
Building dynamic docker-linux-arm64
+ go build -o build/docker-linux-arm64 -tags ' pkcs11' -ldflags '-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -Wl,-dT,/root/rpmbuild/BUILD/src/.package_note-docker-ce-cli-0.0.0.20220330082637.68cad50-0.fc36.aarch64.ld -w -X "github.com/docker/cli/cli/version.GitCommit=68cad50" -X "github.com/docker/cli/cli/version.BuildTime=2022-03-30T20:05:36Z" -X "github.com/docker/cli/cli/version.Version=0.0.0-20220330082637-68cad50" -X "github.com/docker/cli/cli/version.PlatformName=Docker Engine - Community"' -buildmode=pie github.com/docker/cli/cmd/docker
# github.com/docker/cli/cmd/docker
flag provided but not defined: -Wl,-z,relro
usage: link [options] main.o
This patch changes the variable we use to `GO_LDFLAGS`, taking a similar approach
as containerd, and various other projects using this name: https://grep.app/search?q=GO_LDFLAGS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was not used anywhere, and the error type already satisfied
the github.com/docker/docker/errdefs.ErrNotFound interface, so let's remove
this utility and (if needed at some point) use errdefs.IsNotFound() instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in fd2f1b3b66 as part of
the `docker engine` sub-commands, which were deprecated, and removed in
43b2f52d0c.
This function is not used by anyone, so safe to remove.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in fd2f1b3b66 as part of
the `docker engine` sub-commands, which were deprecated, and removed
in 43b2f52d0c.
This function is not used by anyone, so safe to remove.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's slightly more verbose, but helps finding the purpose of each
of the environment variables. In tests, I kept the fixed strings.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This will generate "details_url" for options, so that the options
table on the pages at docs.docker.com link to the section describing
the option.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this, the sections are linked from the "options" table when
producing the documentation on docs.docker.com
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Marc Cornellà
CrazyMax
Nicolas De loof