Commit ddadd3db49 changed
the heading levels of various sections, but as a result,
the "daemon configuration file" section (and other sections)
changed from a H2 to a H4, therefore no longer showing
up in the page's TOC / navigation bar.
This patch changes the heading level to a H3 for
sections that should show up in the page navigation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--volumes` flag was added in 37fd6128dc,
but the documentation was not updated.
This patch updates the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Implement runRollback to not use runUpdate
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add version tag and add flag quiet to suppress progress output
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed flags from warnDetachDefault
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add detach flag on rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Create a fakeClient for service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Added unit test for rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface instead of *command.DockerCli in service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed flags from warnDetachDefault"
This reverts commit 3e4f601c8a82cc2599a755dc693409bbc47917fc.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed test.NewFakeCli instanciation
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed unused receiver
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Replaced cli by dockerCli
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed unused receiver"
This reverts commit 604ef7c13df3d019949ca81d992db501114dafce.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed last typo
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
the missing `driver` made my bridge not have the correct MTU when i copied from the example and not the doc table. Brings them into alignment.
Signed-off-by: bryfry <bryon@fryer.io>
Since CLI was moved to a separate repo, these references are incorrect.
Fixed with the help of sed script, verified manually.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The `is-task` filter was only documented in the usage
section, but this section is not used in the documentation.
This patch adds the missing filter, synchronises the
man page source, and does some slight rephrasing
and reformatting of the filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a new option added specifically to allow for debugging of bugs
in Docker's storage drivers or libdm itself.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The Docker Compose docs suggest using a separate override
configuration file for production-specific settings, but
it is not obvious how to feed this to `docker stack deploy`,
which only supports a single Compose file as input. Thus,
we now describe how to do this by merging the configuration
files with `docker-compose config`.
Signed-off-by: Denis Washington <denis@denisw.de>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2b8f0eef7338f37104464154ba65aef7db3b9703)
Signed-off-by: Tibor Vass <tibor@docker.com>
Adding more on -m and --memory
(cherry picked from commit c3fbca106552f2dadcb89510ff87945b50f36419)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit b4047a849bd3018f8a8eabf34613a4fca57f818e)
Signed-off-by: Tibor Vass <tibor@docker.com>
This patch adds the untilRemoved option to the ContainerWait API which
allows the client to wait until the container is not only exited but
also removed.
This patch also adds some more CLI integration tests for waiting for a
created container and waiting with the new --until-removed flag.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Handle detach sequence in CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Update Container Wait Conditions
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Apply container wait changes to API 1.30
The set of changes to the containerWait API missed the cut for the
Docker 17.05 release (API version 1.29). This patch bumps the version
checks to use 1.30 instead.
This patch also makes a minor update to a testfile which was added to
the builder/dockerfile package.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Remove wait changes from CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address minor nits on wait changes
- Changed the name of the tty Proxy wrapper to `escapeProxy`
- Removed the unnecessary Error() method on container.State
- Fixes a typo in comment (repeated word)
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Use router.WithCancel in the containerWait handler
This handler previously added this functionality manually but now uses
the existing wrapper which does it for us.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Add WaitCondition constants to api/types/container
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
- Update ContainerWait backend interface to not return pointer values
for container.StateStatus type.
- Updated container state's Wait() method comments to clarify that a
context MUST be used for cancelling the request, setting timeouts,
and to avoid goroutine leaks.
- Removed unnecessary buffering when making channels in the client's
ContainerWait methods.
- Renamed result and error channels in client's ContainerWait methods
to clarify that only a single result or error value would be sent
on the channel.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Move container.WaitCondition type to separate file
... to avoid conflict with swagger-generated code for API response
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Allows for a plugin type that can be used to scrape metrics.
This is useful because metrics are not neccessarily at a standard
location... `--metrics-addr` must be set, and must currently be a TCP
socket.
Even if metrics are done via a unix socket, there's no guarentee where
the socket may be located on the system, making bind-mounting such a
socket into a container difficult (and racey, failure-prone on daemon
restart).
Metrics plugins side-step this issue by always listening on a unix
socket and then bind-mounting that into a known path in the plugin
container.
Note there has been similar work in the past (and ultimately punted at
the time) for consistent access to the Docker API from within a
container.
Why not add metrics to the Docker API and just provide a plugin with
access to the Docker API? Certainly this can be useful, but gives a lot
of control/access to a plugin that may only need the metrics. We can
look at supporting API plugins separately for this reason.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is synonymous with `docker run --cidfile=FILE` and writes the digest of
the newly built image to the named file. This is intended to be used by build
systems which want to avoid tagging (perhaps because they are in CI or
otherwise want to avoid fixed names which can clash) by enabling e.g. Makefile
constructs like:
image.id: Dockerfile
docker build --iidfile=image.id .
do-some-more-stuff: image.id
do-stuff-with <image.id
Currently the only way to achieve this is to use `docker build -q` and capture
the stdout, but at the expense of losing the build output.
In non-silent mode (without `-q`) with API >= v1.29 the caller will now see a
`JSONMessage` with the `Aux` field containing a `types.BuildResult` in the
output stream for each image/layer produced during the build, with the final
one being the end product. Having all of the intermediate images might be
interesting in some cases.
In silent mode (with `-q`) there is no change, on success the only output will
be the resulting image digest as it was previosuly.
There was no wrapper to just output an Aux section without enclosing it in a
Progress, so add one here.
Added some tests to integration cli tests.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The daemon config for defaulting to no-new-privileges for containers was
added in d7fda019bb7e24f42f8ae1ddecb3fd52df3c48bf, but somehow we
managed to omit the flag itself, but also documented the flag.
This just adds the actual flag.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
added some clarification around why attach can appear hung to some. issue #1456 on docs
Signed-off-by: gary schaetz <gary@schaetzkc.com>
Updated the documentation to reflect what happens when you use a fragment in
the docker build url parameter.
Signed-off-by: Gary Schaetz <gary@schaetzkc.com>
added markup for commands
Signed-off-by: Gary Schaetz <gary@schaetzkc.com>
This new flag will allow the configuration of an interface that
can be used for data path traffic to be isolated from control
plane traffic. This flag is simply percolated down to libnetwork
and will be used by all the global scope drivers (today overlay)
Negative test added for invalid flag arguments
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Sebastiaan van Stijn
Frieder Bluemle
Riyaz Faizullabhoy
Sebastiaan van Stijn
Allen Sun
Tycho Andersen
Joao Fernandes
Vincent Demeester
Carlo Mion
Misty Stanley-Jones
Daniel Nephin
Boaz Shuster
Marco Mariani
Christophe Vidal
Jimmy Leger
John Howard
bryfry
Luka Hartwig
Harald Albers
Jonathan Lee
zebrilee
Kir Kolyshkin
Hernan Garcia
allencloud
Aleksa Sarai
yuexiao-wang
Victor Vieux
Dhawal Yogesh Bhanushali
Brian Goff
Vincent Demeester
Alessandro Boch
Josh Hawn
Ying Li
Noah Treuhaft
Tonis Tiigi
Aaron Lehmann
Ian Campbell
Gary Schaetz
MichaelSpets
David Sheets
Denis Defreyne
Dong Chen
Flavio Crisciani
Julien Maitrehenry