This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Swarm join has been changed in f5e1f6f6880391a5a3399023cf93a3c48502e57d,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
When `psFormat` is used in the docker client config json, if the output
is non-standard it breaks some of the completion handling for
containers.
This fixes that by ensuring that calls to `ps` use the default/standard
formatting by calling `docker ps --format 'table'`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
Use of "Set ..." and "Specify ..." are removed in favor of directly
using nouns.
Also:
- add description for `run --isolation`
- reduce description of `run --shm-size`
- fix `daemon --bip` argument handling
Signed-off-by: Vincent Bernat <vincent@bernat.im>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Otherwise, the cache would be invalid and won't be refreshed soon. This
can happen when the user has the completion installed before docker is
installed.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
LXC support has been deprecated and the related completion has been
removed in #17700 but was added back in #17334.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This enables Zsh to understand commands like "docker run -it
ubuntu". However, by enabling this, this also makes Zsh completes
"docker run -u<tab>" with "docker run -uapprox" which is not valid. The
users have to put the space or the equal sign themselves before trying
to complete.
Therefore, this behavior is disabled by default. To enable it:
zstyle ':completion:*:*:docker:*' option-stacking yes
zstyle ':completion:*:*:docker-*:*' option-stacking yes
Signed-off-by: Vincent Bernat <vincent@bernat.im>
This is allowed by Docker and helps the completion to not get confused
when a user uses this notation. This will also help to enable stacking
of short options since Zsh needs that to not stack options with
arguments.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Add fluentd logging driver to zsh completion #12876
- Add inspect --type flag to zsh completion #13187
- Respect -H option in zsh completion #13195
- Fix number of argument limit for pause and unpause in zsh completion
Signed-off-by: Steve Durrheimer <s.durrheimer@gmail.com>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
zsh completion is updated with the content of
felixr/docker-zsh-completion.
ef4a3fce0437 Update completion for `wait' as per 1.5.0
ace5aa9c1282 Add completion for `stats'
91f112834865 Update completion for `search' as per 1.5.0
a5e4febe4bf6 Update completion for `save' as per 1.5.0
1cdbdb18a384 Add completion for `rename'
2f004bb724b9 Update completion for `pull' as per 1.5.0
773b88e0885b Update completion for `logs' as per 1.5.0
c57e5d5c4551 Update completion for `load' to favor archive files
9af7d12b487e Update completion for `images` as per 1.5.0
0d59e66aff30 update completion for `exec' to complete on commands
46b6c66760d7 Update completion for `events' as per 1.5.0
307e0bdc4c34 Update completion for `commit' as per 1.5.0
c4b331f38cc4 Update completion for `build' as per 1.5.0
Also added myself in the `MAINTAINERS` file.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
A lot of flags have been added on the output of `docker help`. Use a
more robust method to extract the list of available subcommands by
spotting the `Command:` line and the next blank line.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
zsh completion is updated with the content of
felixr/docker-zsh-completion.
The major change since the last merge is the addition of
exec/create (but they were already present in the docker repository) as
well as pause/unpause/logout/events and the use of short/long options
when they are available. Some missing options were also added.
12f00abd7178 Add completion for `exec'
4e2faa075f9a Merge `run' and `create' commands.
34134de077de Add missing long/short options for most commands.
d09f62339ab5 Add completion for `pause' and `unpause'
e4754c3b3b9d Add completion for `logout'
e0935eb3d5d2 Add completion for `events'
dae353cb9afb Add completion for `create`
Docker-DCO-1.1-Signed-off-by: Vincent Bernat <vincent@bernat.im> (github: vincentbernat)
zsh completion is updated with the content of
felixr/docker-zsh-completion.
The major change since the last merge is the removal of use of
sed/awk. This should help a lot OSX users who previously had to install
gawk and gsed.
Docker-DCO-1.1-Signed-off-by: Vincent Bernat <vincent@bernat.im> (github: vincentbernat)
zsh completion is updated with the content of
felixr/docker-zsh-completion.
Docker-DCO-1.1-Signed-off-by: Vincent Bernat <vincent@bernat.im> (github: vincentbernat)
ZSH completion scripts aren't supposed to be executable - they're sourced by ZSH and aren't run directly.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
These were found using `git grep -nE '[^-a-zA-Z0-9<>]-[a-zA-Z0-9]{2}'` (fair warning: _many_ false positives there).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
update docker.go
move to pkg
update docs
update name and copyright
change --sinceId to --since-id, update completion and docs
Docker-DCO-1.1-Signed-off-by: Victor Vieux <victor@docker.com> (github: vieux)
Aaron Lehmann
Steve Durrheimer
Vincent Demeester
Sebastiaan van Stijn
Harald Albers
Jonathan Lomas
allencloud
Ke Xu
Kenfe-Mickael Laventure
Tianyi Wang
Fabrizio Soppelsa
Mrunal Patel
Brian Goff
Dan Walsh
Jessica Frazelle
Mike Danese
Ken Cochrane
Vincent Bernat
Aidan Hobson Sayers
Vincent Woo
Tibor Vass
Ma Shimiao
Wen Cheng Ma
Antonio Murdaca
David Calavera
Zhang Kun
Tim Hockin
Samuel Karp
Ahmet Alp Balkan
Michal Minar
Sven Dowideit
Vincent Bernat
Tibor Vass
Jessica Frazelle
Thomas LÉVEIL
Tianon Gravi
Victor Vieux
Victor Vieux