Commit a77f2450c70312f8c26877a18bfe2baa44d4abb9 switched `docker run`
to use the `pflags` package. Due to this change, the usage output for
the `--blkio-weight-device` and `--device-*` flags changed and now
showed `weighted-device`, and `throttled-device` as value type. As a
result, the output of `docker run --help` became a lot wider.
This patch changes the output to show `list` instead, which is
consistent with other options that allow to be set multiple times.
Output before this change;
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device weighted-device Block IO weight (relative device weight) (default [])
--device list Add a host device to the container (default [])
--device-read-bps throttled-device Limit read rate (bytes per second) from a device (default [])
--device-read-iops throttled-device Limit read rate (IO per second) from a device (default [])
--device-write-bps throttled-device Limit write rate (bytes per second) to a device (default [])
--device-write-iops throttled-device Limit write rate (IO per second) to a device (default [])
-w, --workdir string Working directory inside the container
Output after this change;
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device list Block IO weight (relative device weight) (default [])
--device list Add a host device to the container (default [])
--device-read-bps list Limit read rate (bytes per second) from a device (default [])
--device-read-iops list Limit read rate (IO per second) from a device (default [])
--device-write-bps list Limit write rate (bytes per second) to a device (default [])
--device-write-iops list Limit write rate (IO per second) to a device (default [])
-w, --workdir string Working directory inside the container
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
… or could be in `opts` package. Having `runconfig/opts` and `opts`
doesn't really make sense and make it difficult to know where to put
some code.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
`--publish-add 8081:81 --publish-add 8082:82 --publish-rm 80
--publish-rm 81/tcp --publish-rm 82/tcp` would thus result in 81 and
82 to be published.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Currently `--publish-rm` only accepts `<TargetPort>` or `<TargetPort>[/Protocol]`
though there are some confusions.
Since `--publish-add` accepts `<PublishedPort>:<TargetPort>[/Protocol]`, some user
may provide `--publish-rm 80:80`. However, there is no error checking so the incorrect
provided argument is ignored silently.
This fix adds the check to make sure `--publish-rm` only accepts `<TargetPort>[/Protocol]`
and returns error if the format is invalid.
The `--publish-rm` itself may needs to be revisited to have a better UI/UX experience,
see discussions on:
https://github.com/docker/swarmkit/issues/1396https://github.com/docker/docker/issues/25200#issuecomment-236213242https://github.com/docker/docker/issues/25338#issuecomment-240787002
This fix is short term measure so that end users are not misled by the silently ignored error
of `--publish-rm`.
This fix is related to (but is not a complete fix):
https://github.com/docker/swarmkit/issues/1396
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is based on the comment:
https://github.com/docker/docker/pull/28147#discussion_r86996347
Previously the output string of the `DurationOpt` is `duration-ptr`
and `Uint64Opt` is `uint64-ptr`. While it is clear to developers,
for a normal user `-ptr` might not be very informative.
On the other hand, the default value of `DurationOpt` and `Uint64Opt`
has already been quite informative: `none`. That means if no flag
provided, the value will be treated as none.
(like a ptr with nil as the default)
For that reason this fix removes the `-ptr`.
Also, the output in the docs of `service create` has been quite
out-of-sync with the true output. So this fix updates the docs
to have the most up-to-date help output of `service create --help`.
This fix is related to #28147.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the proposal raised in 27921 and add
`--cpus` flag for `docker run/create`.
Basically, `--cpus` will allow user to specify a number (possibly partial)
about how many CPUs the container will use. For example, on a 2-CPU system
`--cpus 1.5` means the container will take 75% (1.5/2) of the CPU share.
This fix adds a `NanoCPUs` field to `HostConfig` since swarmkit alreay
have a concept of NanoCPUs for tasks. The `--cpus` flag will translate
the number into reused `NanoCPUs` to be consistent.
This fix adds integration tests to cover the changes.
Related docs (`docker run` and Remote APIs) have been updated.
This fix fixes 27921.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The code for default port was already there but
it didn’t work because split function errored out
before. This should be the desired behavior that
matches daemon listen address with swarm listen
address.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This changes the default transport for Windows from unencrypted TCP to
npipe. This is similar to how Linux runs with the unix socket transport by
default.
Signed-off-by: John Starks <jostarks@microsoft.com>
This adds an npipe protocol option for Windows hosts, akin to unix
sockets for Linux hosts. This should become the default transport
for Windows, but this change does not yet do that.
It also does not add support for the client side yet since that
code is in engine-api, which will have to be revendored separately.
Signed-off-by: John Starks <jostarks@microsoft.com>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
These validators are only used by runconfig.Parse() or some other part of the
client, so move them into the client-side package.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
This function was only being used from a single place opts/opts.go. This
change moves it from a incohesive package (parsers) to the single place it
is used.
Also made a bunch of the helper methods private because they are not used
by any external modules.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
So we don't print those <no value> in the client and we don't fail
executing inspect templates with API field names.
Make sure those fields are initialized as empty slices when
a container is loaded from disk and their values are nil.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The first param on opts.ParseHost() wasn't being used for anything.
Once we get rid of that param we can then also clean-up some code
that calls ParseHost() because the param that was passed in wasn't
being used for anything else.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Refactor so that the Host flag validation doesn't destroy the user's input,
and then post process the flags when we know the TLS options
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
This fixes two problems:
1. docker run --device /dev/sda:rw ubuntu bash doesn't work
2. --device /dev/zero:/dev/noro:ro doesn't show clear error message,
but fail when writing to cgroup file.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
1. rename it from ValidateMountMode to ValidMountMode
Because it's a function simply check mount mode is valid or not.
2. remove the rw check return value
It's not supposed to be combined into this function, and we already
have a function for that check.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Add unit tests of the ParseEnvFile function. Test for:
* good file
* empty file
* non existent file
* badly formatted file
Signed-off-by: Matthieu Hauglustaine <matt.hauglustaine@gmail.com>
Return an error value if bufio failed to properly read a token.
Avoids running a container with partial environment.
Fixes: #14266
Signed-off-by: Matthieu Hauglustaine <matt.hauglustaine@gmail.com>
Fixes: #10655
As noted in the issue, bad format was being returned even if the format
was appropriate, but the IP was invalid. This adds a better error
message for when the IP address fails validation.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Since the separator for extra host settings (for /etc/hosts in a
container) is a ":", the code that handles extra hosts needed to only
split on the first ":" to preserve IPv6 addresses which are passed via
the command line settings as well as stored in the JSON container
config.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
See #10141 for more info, but the main point of this is to make sure
that if you do "docker run -e FOO ..." that FOO from the current env
is passed into the container. This means that if there's a value, its
set. But it also means that if FOO isn't set then it should be unset in
the container too - even if it has to remove it from the env. So,
unset HOSTNAME
docker run -e HOSTNAME busybox env
should _NOT_ show HOSTNAME in the list at all
Closes#10141
Signed-off-by: Doug Davis <dug@us.ibm.com>
Passing RepositoryInfo to ResolveAuthConfig, pullRepository, and pushRepository
Moving --registry-mirror configuration to registry config
Created resolve_repository job
Repo names with 'index.docker.io' or 'docker.io' are now synonymous with omitting an index name.
Adding test for RepositoryInfo
Adding tests for opts.StringSetOpts and registry.ValidateMirror
Fixing search term use of repoInfo
Adding integration tests for registry mirror configuration
Normalizing LookupImage image name to match LocalName parsing rules
Normalizing repository LocalName to avoid multiple references to an official image
Removing errorOut use in tests
Removing TODO comment
gofmt changes
golint comments cleanup. renaming RegistryOptions => registry.Options, and RegistryServiceConfig => registry.ServiceConfig
Splitting out builtins.Registry and registry.NewService calls
Stray whitespace cleanup
Moving integration tests for Mirrors and InsecureRegistries into TestNewIndexInfo unit test
Factoring out ValidateRepositoryName from NewRepositoryInfo
Removing unused IndexServerURL
Allowing json marshaling of ServiceConfig. Exposing ServiceConfig in /info
Switching to CamelCase for json marshaling
PR cleanup; removing 'Is' prefix from boolean members. Removing unneeded json tags.
Removing non-cleanup related fix for 'localhost:[port]' in splitReposName
Merge fixes for gh9735
Fixing integration test
Reapplying #9754
Adding comment on config.IndexConfigs use from isSecureIndex
Remove unused error return value from isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Adding back comment in isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
used path package instead of path/filepath so that --volumes and
--device parameters to always validate paths as unix paths instead of
OS-dependent path convention
Signed-off-by: Ahmet Alp Balkan <ahmetb@microsoft.com>
This adds a --add-host host:ip flag which appends lines to /etc/hosts. This is needed in places where you want the container to get a different name resolution than it would through DNS. This was submitted before as #5525, closed, and now I am re-opening. It has come up 2 or 3 times in the last couple days.
Signed-off-by: Tim Hockin <thockin@google.com>
Adds support for a --registry-mirror=scheme://<host>[:port]
daemon flag. The flag may be present multiple times. If
provided, mirrors are prepended to the list of endpoints used
for image pull. Note that only mirrors of the public
index.docker.io registry are supported, and image/tag resolution
is still performed via the official index.
Docker-DCO-1.1-Signed-off-by: Tim Smith <timbot@google.com> (github: timbot)
functions to pkg/parsers/kernel, and parsing filters to
pkg/parsers/filter. Adjust imports and package references.
Docker-DCO-1.1-Signed-off-by: Erik Hollensbe <github@hollensbe.org> (github: erikh)
In that case /etc/resolv.conf will be generated with no search
option. Usage: --dns-search=.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
trim the front of variables. Error if there are other spaces present.
Leave the value alone.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
match dock functionality, and not try to achieve shell-sourcing compatibility
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Add a --dns-search parameter and a DnsSearch
configuration field for specifying dns search
domains.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
Daniel Nephin
Sebastiaan van Stijn
yuexiao-wang
Vincent Demeester
Yong Tang
Victor Vieux
wefine
Jana Radhakrishnan
Evan Hazlett
Akihiro Suda
Michael Crosby
allencloud
Tonis Tiigi
Dan Walsh
John Howard
John Starks
David Calavera
Ma Shimiao
Justas Brazauskas
Shijiang Wei
Lei Jitang
Doug Davis
Sven Dowideit
Sevki Hasirci
Brian Goff
Qiang Huang
Matt Robenolt
Antonio Murdaca
Shishir Mahajan
Tibor Vass
Matthieu Hauglustaine
Eric-Olivier Lamey
Antonio Murdaca
wlan0
George MacRorie
Tomáš Hrčka
Phil Estes
Don Kjer
Victor Vieux
Ahmet Alp Balkan
Tim Hockin
Tim Smith
Solomon Hykes
Tibor Vass
Erik Hollensbe
Jan Pazdziora
Fabio Falci
Vincent Batts
Daniel Norberg
Daniel Norberg
Victor Vieux