support for kubernetes contexts was deprecated in docker 20.10 through
b639ea8b89, 0793f96394,
and 1d37fb3027, and removed altoghether in
23.0 through 193ede9b12.
This patch removes the remaining stubs for options that were deprecated
and no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
More things to be done after this, to allow passing a custom user-agent,
but let's start with just using this utility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.5 (released 2023-06-06) includes four security fixes to the cmd/go and
runtime packages, as well as bug fixes to the compiler, the go command, the
runtime, and the crypto/rsa, net, and os packages. See the Go 1.20.5 milestone
on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.5+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.4...go1.20.5
These minor releases include 3 security fixes following the security policy:
- cmd/go: cgo code injection
The go command may generate unexpected code at build time when using cgo. This
may result in unexpected behavior when running a go program which uses cgo.
This may occur when running an untrusted module which contains directories with
newline characters in their names. Modules which are retrieved using the go command,
i.e. via "go get", are not affected (modules retrieved using GOPATH-mode, i.e.
GO111MODULE=off, may be affected).
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29402 and Go issue https://go.dev/issue/60167.
- runtime: unexpected behavior of setuid/setgid binaries
The Go runtime didn't act any differently when a binary had the setuid/setgid
bit set. On Unix platforms, if a setuid/setgid binary was executed with standard
I/O file descriptors closed, opening any files could result in unexpected
content being read/written with elevated prilieges. Similarly if a setuid/setgid
program was terminated, either via panic or signal, it could leak the contents
of its registers.
Thanks to Vincent Dehors from Synacktiv for reporting this issue.
This is CVE-2023-29403 and Go issue https://go.dev/issue/60272.
- cmd/go: improper sanitization of LDFLAGS
The go command may execute arbitrary code at build time when using cgo. This may
occur when running "go get" on a malicious module, or when running any other
command which builds untrusted code. This is can by triggered by linker flags,
specified via a "#cgo LDFLAGS" directive.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29404 and CVE-2023-29405 and Go issues https://go.dev/issue/60305 and https://go.dev/issue/60306.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Official Golang images are now only available for 3.18 and 3.17;
3.18 doesn't look to play well with gotestsum, so sticking to
an older version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When passing a Dockerfile through stdin, it's not possible to specify the
name of the Dockerfile (using the `-f` option). When building with BuildKit
enabled, an error is already produced for this case, but the classic builder
silently ignored it.
This patch adds an error for this situation:
echo -e 'FROM busybox' | DOCKER_BUILDKIT=0 docker build -f some.Dockerfile -
DEPRECATED: The legacy builder is deprecated and will be removed in a future release.
BuildKit is currently disabled; enable it by removing the DOCKER_BUILDKIT=0
environment-variable.
unable to prepare context: ambiguous Dockerfile source: both stdin and flag correspond to Dockerfiles
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This error was only used in a single location, so no need to define a
package-level variable for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
All users of this function sorted the results afterwards, so let's
do it as part of the function itself.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was marked deprecated in 977d3ae046,
which is part of Docker 20.10 and up.
This patch removes the field.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
---
commandconn: fix race on `Close()`
During normal operation, if a `Read()` or `Write()` call results
in an EOF, we call `onEOF()` to handle the terminating command,
and store it's exit value.
However, if a Read/Write call was blocked while `Close()` is called
the in/out pipes are immediately closed which causes an EOF to be
returned. Here, we shouldn't call `onEOF()`, since the reason why
we got an EOF is because we're already terminating the connection.
This also prevents a race between two calls to the commands `Wait()`,
in the `Close()` call and `onEOF()`
---
Add CLI init timeout to SSH connections
---
connhelper: add 30s ssh default dialer timeout
(same as non-ssh dialer)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This code was introduced in 15aa2a663b,
but from those changes, it appears that overwriting the config value was
merely out of convenience, and that struct being used as an intermediate.
While changing the config here should be mostly ephemeral, and not written
back to the config-file, let's be clear on intent, and not mutatte the config
as part of this code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function returned the whole response, but we already handled the
warnings included in the response as part of the function. All consumers
of this function only used the container-ID, so let's simplify and return
just that (it's a non-exported func, so we can change the signature again
if we really need it).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a const for the name of the environment-variable we accept, so
that we can document its purpose in code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the default proxy, to assist with vanity domains mis-behaving, but keep
a fallback for situations where we need to get modules from GitHub directly.
This should hopefully help with the gopkg.in/yaml.v2 domain often going AWOL;
#14 245.9 gopkg.in/yaml.v2@v2.4.0: unrecognized import path "gopkg.in/yaml.v2": reading https://gopkg.in/yaml.v2?go-get=1: 502 Bad Gateway
#14 245.9 server response: Cannot obtain refs from GitHub: cannot talk to GitHub: Get https://github.com/go-yaml/yaml.git/info/refs?service=git-upload-pack: write tcp 10.131.9.188:60820->140.82.121.3:443: write: broken pipe
curl 'https://gopkg.in/yaml.v2?go-get=1'
Cannot obtain refs from GitHub: cannot talk to GitHub: Get https://github.com/go-yaml/yaml.git/info/refs?service=git-upload-pack: write tcp 10.131.9.188:60820->140.82.121.3:443: write: broken pipe
From the Go documentation; https://go.dev/ref/mod#goproxy-protocol
> List elements may be separated by commas (,) or pipes (|), which determine error
> fallback behavior. When a URL is followed by a comma, the go command falls back
> to later sources only after a 404 (Not Found) or 410 (Gone) response. When a URL
> is followed by a pipe, the go command falls back to later sources after any error,
> including non-HTTP errors such as timeouts. This error handling behavior lets a
> proxy act as a gatekeeper for unknown modules. For example, a proxy could respond
> with error 403 (Forbidden) for modules not on an approved list (see Private proxy
> serving private modules).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the "golang.org/x/sys/execabs" package was introduced to address a security
issue on Windows, and changing the default behavior of os/exec was considered
a breaking change. go1.19 applied the behavior that was previously implemented
in the execabs package;
from the release notes: https://go.dev/doc/go1.19#os-exec-path
> Command and LookPath no longer allow results from a PATH search to be found
> relative to the current directory. This removes a common source of security
> problems but may also break existing programs that depend on using, say,
> exec.Command("prog") to run a binary named prog (or, on Windows, prog.exe)
> in the current directory. See the os/exec package documentation for information
> about how best to update such programs.
>
> On Windows, Command and LookPath now respect the NoDefaultCurrentDirectoryInExePath
> environment variable, making it possible to disable the default implicit search
> of “.” in PATH lookups on Windows systems.
With those changes, we no longer need to use the execabs package, and we can
switch back to os/exec.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Laura Brehm
David Karlsson