Docker has several capabilities enabled by default and some not.
It seems natural to follow this distinction in --cap-add and
--cap-drop.
Signed-off-by: Harald Albers <github@albersweb.de>
This commit reverts 273eeb813c1db0f42c2ad5e053972eeb00907568 (#26825).
For the discussion so far, please refer to #28527.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
In 28186, `dns-options-add/rm` has been changed to `dns-option-add/rm`
in `docker service create/update`, for the purpose of consistency.
This fix updates bash completion to remove extra `s`.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Add the following options to "swarm init" and "swarm update":
- --max-snapshots: Retain this many old Raft snapshots in addition
to the latest one
- --snapshot-interval: Number of log entries between Raft snapshots
These options already existed in SwarmKit and the Docker API but were
never exposed in the CLI. I'm adding them here to fix this oversight.
--max-snapshots may be useful for debugging purposes and more
conservative users who want to store rolling backups of old versions of
the Raft state.
--snapshot-interval is most useful for performance tuning. The default
value of 10000 may not be ideal for some setups.
There is also a LogEntriesForSlowFollowers option that is not exposed. I
decided not to expose it along with these others because I don't think
it's generally useful (and I'm not sure what I would call the CLI flag).
But if people want, I can expose it for the sake of completeness.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
--group-add was used for specifying groups for both service create
and service update. For create it was confusing since we don't have
an existing set of groups. Instead I added --group to create, and
moved --group-add to service update only, like --group-rm
This deals with issue 27646
Signed-off-by: Lily Guo <lily.guo@docker.com>
Update flag documentation
Specify that --group, --group-add and --groupd-rm refers to
supplementary user groups
Signed-off-by: Lily Guo <lily.guo@docker.com>
Fix docs for groups and update completion scripts
Signed-off-by: Lily Guo <lily.guo@docker.com>
A HealthConfig entry was added to the ContainerSpec associated with the
service being created or updated.
Signed-off-by: Cezar Sa Espinola <cezarsa@gmail.com>
The --name flag was inadvertently added to
docker service update, but is not supported,
as it has various side-effects (e.g., existing
tasks are not renamed).
This removes the flag from the service update
command.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In #23614 `docker inspect` was semantically enhanced to inspect "everything".
Therefore moving its logic to `_docker_container_inspect` was not correct.
This commit moves it back to its original top-level location (`_docker_inspect`)
so that it can be called by `_docker_{container,image}_inspect` and others (will
be added in follow-up PRs).
Parameterization was added in order to get caller-specific behavior.
Signed-off-by: Harald Albers <github@albersweb.de>
containers may specify these cgroup values at runtime. This will allow
processes to change their priority to real-time within the container
when CONFIG_RT_GROUP_SCHED is enabled in the kernel. See #22380.
Also added sanity checks for the new --cpu-rt-runtime and --cpu-rt-period
flags to ensure that that the kernel supports these features and that
runtime is not greater than period.
Daemon will support a --cpu-rt-runtime flag to initialize the parent
cgroup on startup, this prevents the administrator from alotting runtime
to docker after each restart.
There are additional checks that could be added but maybe too far? Check
parent cgroups to ensure values are <= parent, inspecting rtprio ulimit
and issuing a warning.
Signed-off-by: Erik St. Martin <alakriti@gmail.com>
Currently, there's no way to restart the tasks of a service without
making an actual change to the service. This leads to us giving awkward
workarounds as in
https://github.com/docker/docker.github.io/pull/178/files, where we tell
people to scale a service up and down to restore balance, or make
unnecessary changes to trigger a restart.
This change adds a --force option to "docker service update", which
forces the service to be updated even if no changes require that.
Since rolling update parameters are respected, the user can use
"docker service --force" to do a rolling restart. For example, the
following is supported:
docker service update --force --update-parallelism 2 \
--update-delay 5s myservice
Since the default value of --update-parallelism is 1, the default
behavior is to restart the service one task at a time.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Keeping the current behavior for exec, i.e., inheriting
variables from main process. New variables will be added
to current ones. If there's already a variable with that
name it will be overwritten.
Example of usage: docker exec -it -e TERM=vt100 <container> top
Closes#24355.
Signed-off-by: Jonh Wendell <jonh.wendell@redhat.com>
This adds support for two enhancements to swarm service rolling updates:
- Failure thresholds: In Docker 1.12, a service update could be set up
to either pause or continue after a single failure occurs. This adds
an --update-max-failure-ratio flag that controls how many tasks need to
fail to update for the update as a whole to be considered a failure. A
counterpart flag, --update-monitor, controls how long to monitor each
task for a failure after starting it during the update.
- Rollback flag: service update --rollback reverts the service to its
previous version. If a service update encounters task failures, or
fails to function properly for some other reason, the user can roll back
the update.
SwarmKit also has the ability to roll back updates automatically after
hitting the failure thresholds, but we've decided not to expose this in
the Docker API/CLI for now, favoring a workflow where the decision to
roll back is always made by an admin. Depending on user feedback, we may
add a "rollback" option to --update-failure-action in the future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When sending a build context to a remote server it may be
(significantly) advantageous to compress the build context. This commit
adds support for gz compression when constructing a build context
using a command like "docker build --compress ."
Signed-off-by: Paul Kehrer <paul.l.kehrer@gmail.com>
New driver options:
- `splunk-gzip` - gzip compress all requests to Splunk HEC
(enabled by default)
- `splunk-gzip-level` - change compression level.
Messages are sent in batches by 1000, with frequency of 5 seconds.
Maximum buffer is 10,000 events. If HEC will not be available, Splunk
Logging Driver will keep retrying while it can hold messages in buffer.
Added unit tests for driver.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
`--log-opt splunk-format=inline|json|raw` allows to change how logging
driver sends data to Splunk, where
`inline` - default value, format used before, message is injected as a
line in JSON payload
`json` - driver will try to parse each line as a JSON object and embed it
inside of the JSON payload
`raw` - driver will send Raw payload instead of JSON, tag and attributes
will be prefixed before the message
`--log-opt splunk-verify-connection=true|false` - allows to skip
verification for Splunk Url
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Swarm join has been changed in f5e1f6f6880391a5a3399023cf93a3c48502e57d,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The completion for the new `docker service`, `docker swarm` and
`docker node` command families were partly added in non-alphabetical
order.
Signed-off-by: Harald Albers <github@albersweb.de>
Make `--dispatcher-heartbeat-period` a duration in `docker swarm
update`, allowing to express the value as "5s", "1h", etc.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This add a new filter to 'docker network ls'
to allow filtering by driver-name.
Contrary to "ID" and "name" filters, this
filter only supports an *exact* match.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Completion of these options was not handled consistently.
Now all such options immediatly complete with =false appended.
Signed-off-by: Harald Albers <github@albersweb.de>
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
The obscure `case "${words[$cword-2]}$prev=" in` idiom is no
longer used for key specific completions in options with map values.
The `__docker_map_key_of_current_option()` function does a much
better job.
Signed-off-by: Harald Albers <github@albersweb.de>
This is a refactoring in preparation of cleaning up the handling
of key specific subcompletions.
The new `__docker_map_key_of_current_option()` function will be used
instead of the `__docker_map_key_of_current_option()` idiom in the
following commit.
As this function is very specific, checks using it should be executed
before those checking for `$prev`.
This commit just moves the checks without any modification.
Signed-off-by: Harald Albers <github@albersweb.de>
The currently used idiom for handling key specific subcompletions
did not work here: behind `docker event -f type=network `, the completion
of networks triggered. The expected behaviour is not to complete
anything here.
In order to limit the scope of the corresponding PR, the new idiom is
currently only used in `docker events --filter`.
Signed-off-by: Harald Albers <github@albersweb.de>
The new names make it easier to distinguish between helper functions and
functions that actually perform completion by modifying the global COMPOPT
variable.
Signed-off-by: Harald Albers <github@albersweb.de>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Add support of `tag`, `env` and `labels` for Splunk logging driver.
Removed from message `containerId` as it is the same as `tag`.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
`docker network` is the second command with subcommands.
This refactoring pulls out parsing and processing of subcommands
from `docker volume` completion and thus makes its logic available
for other commands.
Also enables `__docker_pos_first_nonflag` for subcommand completion.
Signed-off-by: Harald Albers <github@albersweb.de>
The shell builtin `compopt` is not available on the outdated bash
version 3.2.57 that ships with Mac OS.
It is used in Docker's bash completion to suppress trailing spaces
in advanced completions of hash map options, e.g. `--log-opt`.
If `compopt` is not available, the new behavior is to do nothing,
i.e. the user will have to delete the additional space.
Signed-off-by: Harald Albers <github@albersweb.de>
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Allow the user to configure how Docker's bash completion works for the
"events", "history", "inspect", "run", "rmi" and "save" commands through the
following environment variables:
DOCKER_COMPLETION_SHOW_IMAGE_IDS
"none" - Show names only (default)
"non-intermediate" - Show names and ids, but omit intermediate image IDs
"all" - Show names and ids, including intermediate image IDs
DOCKER_COMPLETION_SHOW_TAGS
"yes" - include tags in completion options (default)
"no" - don't include tags in completion options
Fixes#9474.
Signed-off-by: Rory Hunter <roryhunter2@gmail.com>
This option was incorrectly ported to the new `daemon` subcommand
structure.
Beside the obvious effect that completion of `docker daemon --log-opt`
did not work, this also caused completion of `docker` and `docker xxx`
to fail on macs with
> bash: words: bad array subscript
Signed-off-by: Harald Albers <github@albersweb.de>
This reverts commit 40b71adee390e9c06471b89ed845132b4ec80177.
Original commit (for which this is effectively a rebased version) is
72a500e9e5929b038816d8bd18d462a19e571c99 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
All docker subcommands support `-h` as an alias for `--help`
unless they have `-h` aliased to something else like `docker run`,
which uses `-h` for `--hostname`.
`-h` is not included in the help messages of the commands, though.
It ist visible in
* reference: only in `docker daemon` reference,
see output of `grep -Rse --help=false docs`
* man pages: only in `docker` man page
see output of `grep -RF '**-h**' man`
For consistency reasons, this commit removes `-h` as an alias for
`--help` from the reference page, man page and the bash completion.
Signed-off-by: Harald Albers <github@albersweb.de>
The custom configuration will also be used in docker invocations made
by the completion script itself, just like `-H`.
Signed-off-by: Harald Albers <github@albersweb.de>
It's a bit confusing: the "global options" are valid as "global options"
for all client commands (i.e. all but daemon).
Example: `docker --log-level info run`
For `docker daemon`, these "global options" are only valid as "command
options".
Example: `docker daemon --log-level info`
As command completion cannot tell which command the user is going to
type next, completion for the daemon command has to allow illegal
syntaxes like
`docker --log-level info daemon --log-level info`
Signed-off-by: Harald Albers <github@albersweb.de>
A bash completion file shouldn't have a executable bit set.
Just change file mode to 644 (instead of 755).
Signed-off-by: Dieter Reuter <dieter.reuter@me.com>
Without this fix, `docker --log-opt ` would not complete anything
because the completions were driver specific.
Signed-off-by: Harald Albers <github@albersweb.de>
Without this fix, `docker --log-driver fluentd --log-opt fluentd-tag=b`
would complete `b` to `build`.
Completion of the commands has to be nailed to __docker_pos_first_nonflag
Signed-off-by: Harald Albers <github@albersweb.de>
This solves several problems that arise from the special treatment of
"=" in Bash.
The fix was required as some log drivers have options in a key=value
form. It also addresses the --option=value and the negated boolean syntax
(--boolean=false).
Note that this is not a general fix for these problems, it is limited to
the __docker_pos_first_nonflag function.
Signed-off-by: Harald Albers <github@albersweb.de>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
With this, `docker pull deb<tab>` will show all `debian:*` tags, as before, but `docker pull -a deb<tab>` will complete directly to just `debian`. 👍
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Harald Albers
Anusha Ragunathan
Vincent Demeester
Akihiro Suda
Yong Tang
Aaron Lehmann
Lily Guo
Cezar Sa Espinola
Ce Gao
Sebastiaan van Stijn
Erik St. Martin
Jonh Wendell
Carlos Alexandro Becker
Paul Kehrer
Denis Gladkikh
timfeirg
Josh Horwitz
Stephen J Day
Mike Goelzer
Arnaud Porterie (icecrime)
Kenfe-Mickael Laventure
Dmitry Smirnov
Fabrizio Soppelsa
Mrunal Patel
Damien Nadé
Dan Walsh
David Calavera
Jessica Frazelle
Mike Danese
Ken Cochrane
Aidan Hobson Sayers
Tianon Gravi
Vincent Woo
Tibor Vass
Ma Shimiao
Antonio Murdaca
Madhu Venugopal
qhuang
Tim Hockin
Samuel Karp
Rory Hunter
Qiang Huang
Tim Dettrick
Dieter Reuter
Lei
Shishir Mahajan
Jessica Frazelle
Ahmet Alp Balkan
Brian Goff
Jessica Frazelle
Vincent Batts