This code depended on the registry Service interface, which has been removed,
so needed to be refactored. Digging further into the reason this code existed,
it looked like the Class=plugin was previously required on Docker Hub to handle
plugins, but this requirement is no longer there, so we can remove this special
handling.
This patch removes the special handling to both remove the use of the registry.Service
interface, as well as removing complexity that is no longer needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was deprecated in b4ca1c7368,
which is part of the v23.0 release, and is no longer used, so we can remove it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The comment was not formatted correctly, and because of that not picked up as
being deprecated.
updates b4ca1c7368
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were deliberately producing errors as part of the test, but
printing those errors could be confusing / make it more difficult to find
actual test-failures.
Before this patch:
=== RUN TestVolumeCreateErrors
Error: conflicting options: either specify --name or provide positional arg, not both
Error: "create" requires at most 1 argument.
See 'create --help'.
Usage: create [OPTIONS] [VOLUME] [flags]
Create a volume
Error: error creating volume
--- PASS: TestVolumeCreateErrors (0.00s)
PASS
With this patch applied:
=== RUN TestVolumeCreateErrors
--- PASS: TestVolumeCreateErrors (0.00s)
PASS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make the error more specific by stating that it's caused by a specific
environment variable and not an environment as a whole.
Also don't escape the variable to make it more readable.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
On Windows, ignore all variables that start with "=" when building an
environment variables map for stack.
For MS-DOS compatibility cmd.exe can set some special environment
variables that start with a "=" characters, which breaks the general
assumption that the first encountered "=" separates a variable name from
variable value and causes trouble when parsing.
These variables don't seem to be documented anywhere, but they are
described by some third-party sources and confirmed empirically on my
Windows installation.
Useful sources:
https://devblogs.microsoft.com/oldnewthing/20100506-00/?p=14133https://ss64.com/nt/syntax-variables.html
Known variables:
- `=ExitCode` stores the exit code returned by external command (in hex
format)
- `=ExitCodeAscii` - same as above, except the value is the ASCII
representation of the code (so exit code 65 (0x41) becomes 'A').
- `=::=::\` and friends - store drive specific working directory.
There is one env variable for each separate drive letter that was
accessed in the shell session and stores the working directory for that
specific drive.
The general format for these is:
`=<DRIVE_LETTER>:=<CWD>` (key=`=<DRIVE_LETTER>:`, value=`<CWD>`)
where <CWD> is a working directory for the drive that is assigned to
the letter <DRIVE_LETTER>
A couple of examples:
`=C:=C:\some\dir` (key: `=C:`, value: `C:\some\dir`)
`=D:=D:\some\other\dir` (key: `=C:`, value: `C:\some\dir`)
`=Z:=Z:\` (key: `=Z:`, value: `Z:\`)
`=::=::\` is the one that seems to be always set and I'm not exactly
sure what this one is for (what's drive `::`?). Others are set as
soon as you CD to a path on some drive. Considering that you start a
cmd.exe also has some working directory, there are 2 of these on start.
All these variables can be safely ignored because they can't be
deliberately set by the user, their meaning is only relevant to the
cmd.exe session and they're all are related to the MS-DOS/Batch feature
that are irrelevant for us.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Tests mocking the output of GET images/json with fakeClient used an
array with one empty element as an empty response.
Change it to just an empty array.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The error returned from "os/exec".Command when attempting to execute a
directory has been changed from syscall.EACCESS to syscall.EISDIR on
Go 1.20. 2b8f214094
Consequently, any runc runtime built against Go 1.20 will return an
error containing 'is a directory' and not 'permission denied'. Update
the string matching so the CLI exits with status code 126 on 'is a
directory' errors (EISDIR) in addition to 'permission denied' (EACCESS).
Signed-off-by: Cory Snider <csnider@mirantis.com>
This prevents us needing to attempt to reconstruct the exact indentation
registry side, which is not canonical - so may differ.
Signed-off-by: Justin Chadwell <me@jedevc.com>
This behavior should not break any more use cases than before.
Previously, if the mismatch occured, we would actually push a manifest
that we then never referred to in the manifest list! If this was done in
a new repository, the command would fail with an obscure error from the
registry - the content wouldn't exist with the descriptor we expect it
to.
Signed-off-by: Justin Chadwell <me@jedevc.com>
Synchronize append on the `removed` slice with mutex because
containerRemoveFunc is called in parallel for each removed container by
`container rm` cli command.
Also reduced the shared access area by separating the scopes of test
cases.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This comment was added in 7929888214
when this code was still in the Moby repository. That comment doesn't appear
to apply to the CLI's usage of this struct though, as nothing in the CLI
sets this field (or uses it), so this should be safe to remove.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows the cli to be initialized with a (custom) API client.
Currently to be used for unit tests, but could be used for other
scenarios.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make sure that the container has multiple port-mappings to illustrate
that only the given port is matched.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use strings.Cut
- don't use nat.NewPort as we don't accept port ranges
- use an early return if there's no results
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
if a context is set (e.g. through DOCKER_CONTEXT or the CLI config file), but
wasn't found, then a "stub" context is added, including an error message that
the context doesn't exist.
DOCKER_CONTEXT=nosuchcontext docker context ls
NAME DESCRIPTION DOCKER ENDPOINT ERROR
default Current DOCKER_HOST based configuration unix:///var/run/docker.sock
nosuchcontext * context "nosuchcontext": context not found: …
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This updates `docker context ls` to:
- not abort listing contexts when failing one (or more) contexts
- instead, adding an ERROR column to inform the user there was
an issue loading the context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows commands that don't require a client connection (such as `context use`)
to be functional, but still produces an error when trying to run a command that
needs to connect with the API;
mkdir -p ~/.docker/ && echo '{"currentContext":"nosuchcontext"}' > ~/.docker/config.json
docker version
Failed to initialize: unable to resolve docker endpoint: load context "nosuchcontext": context does not exist: open /root/.docker/contexts/meta/8bfef2a74c7d06add4bf4c73b0af97d9f79c76fe151ae0e18b9d7e57104c149b/meta.json: no such file or directory
docker context use default
default
Current context is now "default"
docker version
Client:
Version: 22.06.0-dev
API version: 1.42
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "docker context show" command is intended to show the currently configured
context. While the context that's configured may not be valid (e.g., in case
an environment variable was set to configure the context, or if the context
was removed from the filesystem), we should still be able to _show_ the
context.
This patch removes the context validation, and instead only shows the context.
This can help in cases where the context is used to (e.g.) set the command-
prompt, but the user removed the context. With this change, the context name
can still be shown, but commands that _require_ the context will still fail.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This internalizes constructing the Client(), which allows us to provide
fallbacks when trying to determin the current API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also move the resolveContextName() function together with the
method for easier cross-referencing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Paweł Gronowski
Laura Brehm
Cory Snider
Akihiro Suda
Justin Chadwell
CrazyMax