- https://github.com/golang/go/issues?q=milestone%3AGo1.22.7+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.22.6...go1.22.7
These minor releases include 3 security fixes following the security policy:
- go/parser: stack exhaustion in all Parse* functions
Calling any of the Parse functions on Go source code which contains deeply nested literals can cause a panic due to stack exhaustion.
This is CVE-2024-34155 and Go issue https://go.dev/issue/69138.
- encoding/gob: stack exhaustion in Decoder.Decode
Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion.
This is a follow-up to CVE-2022-30635.
Thanks to Md Sakib Anwar of The Ohio State University (anwar.40@osu.edu) for reporting this issue.
This is CVE-2024-34156 and Go issue https://go.dev/issue/69139.
- go/build/constraint: stack exhaustion in Parse
Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion.
This is CVE-2024-34158 and Go issue https://go.dev/issue/69141.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.23.1
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 3bf39d25a0)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d7d56599ca)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.12+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.11...go1.21.12
These minor releases include 1 security fixes following the security policy:
net/http: denial of service due to improper 100-continue handling
The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail.
An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail.
Thanks to Geoff Franks for reporting this issue.
This is CVE-2024-24791 and Go issue https://go.dev/issue/67555.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.21.12
**- Description for the changelog**
```markdown changelog
Update Go runtime to 1.21.12
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit d73d7d4ed3)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
go1.21.11 (released 2024-06-04) includes security fixes to the archive/zip
and net/netip packages, as well as bug fixes to the compiler, the go command,
the runtime, and the os package. See the Go 1.21.11 milestone on our issue
tracker for details;
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.11+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.10...go1.21.11
From the security announcement;
We have just released Go versions 1.22.4 and 1.21.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- archive/zip: mishandling of corrupt central directory record
The archive/zip package's handling of certain types of invalid zip files
differed from the behavior of most zip implementations. This misalignment
could be exploited to create an zip file with contents that vary depending
on the implementation reading the file. The archive/zip package now rejects
files containing these errors.
Thanks to Yufan You for reporting this issue.
This is CVE-2024-24789 and Go issue https://go.dev/issue/66869.
- net/netip: unexpected behavior from Is methods for IPv4-mapped IPv6 addresses
The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected
for IPv4-mapped IPv6 addresses, returning false for addresses which would
return true in their traditional IPv4 forms.
Thanks to Enze Wang of Alioth and Jianjun Chen of Zhongguancun Lab
for reporting this issue.
This is CVE-2024-24790 and Go issue https://go.dev/issue/67680.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These minor releases include 2 security fixes following the security policy:
- cmd/go: arbitrary code execution during build on darwin
On Darwin, building a Go module which contains CGO can trigger arbitrary code execution when using the Apple version of ld, due to
usage of the -lto_library flag in a "#cgo LDFLAGS" directive.
Thanks to Juho Forsén of Mattermost for reporting this issue.
This is CVE-2024-24787 and Go issue https://go.dev/issue/67119.
- net: malformed DNS message can cause infinite loop
A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop.
Thanks to long-name-let-people-remember-you on GitHub for reporting this issue, and to Mateusz Poliwczak for bringing the issue to
our attention.
This is CVE-2024-24788 and Go issue https://go.dev/issue/66754.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.22.3
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.10+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.9...go1.21.10
**- Description for the changelog**
```markdown changelog
Update Go runtime to 1.21.10
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
go1.21.5 (released 2023-12-05) includes security fixes to the go command,
and the net/http and path/filepath packages, as well as bug fixes to the
compiler, the go command, the runtime, and the crypto/rand, net, os, and
syscall packages. See the Go 1.21.5 milestone on our issue tracker for
details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.5+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.5...go1.21.5
from the security mailing:
[security] Go 1.21.5 and Go 1.20.12 are released
Hello gophers,
We have just released Go versions 1.21.5 and 1.20.12, minor point releases.
These minor releases include 3 security fixes following the security policy:
- net/http: limit chunked data overhead
A malicious HTTP sender can use chunk extensions to cause a receiver
reading from a request or response body to read many more bytes from
the network than are in the body.
A malicious HTTP client can further exploit this to cause a server to
automatically read a large amount of data (up to about 1GiB) when a
handler fails to read the entire body of a request.
Chunk extensions are a little-used HTTP feature which permit including
additional metadata in a request or response body sent using the chunked
encoding. The net/http chunked encoding reader discards this metadata.
A sender can exploit this by inserting a large metadata segment with
each byte transferred. The chunk reader now produces an error if the
ratio of real body to encoded bytes grows too small.
Thanks to Bartek Nowotarski for reporting this issue.
This is CVE-2023-39326 and Go issue https://go.dev/issue/64433.
- cmd/go: go get may unexpectedly fallback to insecure git
Using go get to fetch a module with the ".git" suffix may unexpectedly
fallback to the insecure "git://" protocol if the module is unavailable
via the secure "https://" and "git+ssh://" protocols, even if GOINSECURE
is not set for said module. This only affects users who are not using
the module proxy and are fetching modules directly (i.e. GOPROXY=off).
Thanks to David Leadbeater for reporting this issue.
This is CVE-2023-45285 and Go issue https://go.dev/issue/63845.
- path/filepath: retain trailing \ when cleaning paths like \\?\c:\
Go 1.20.11 and Go 1.21.4 inadvertently changed the definition of the
volume name in Windows paths starting with \\?\, resulting in
filepath.Clean(\\?\c:\) returning \\?\c: rather than \\?\c:\ (among
other effects). The previous behavior has been restored.
This is an update to CVE-2023-45283 and Go issue https://go.dev/issue/64028.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Reverts "update to go1.21.4" due to regressions / breaking changes."
This reverts commit 4cf1c50ad1.
This re-applies commit 6472dabe4c.
----
update to go1.21.4
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath package, as well as bug fixes to the linker, the runtime, the compiler, and the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This also moves `musl-dev` to the alpine-base stage, due to changes in
Alpine 3.18 causing gotestsum build to fail because stdlib.h was missing;
#17 5.065 # runtime/cgo
#17 5.065 In file included from _cgo_export.c:3:
#17 5.065 /usr/include/fortify/stdlib.h:23:15: fatal error: stdlib.h: No such file or directory
#17 5.065 23 | #include_next <stdlib.h>
#17 5.065 | ^~~~~~~~~~
alpine 3.17:
/ # find / | grep stdlib.h
/usr/include/c++/12.2.1/tr1/stdlib.h
/usr/include/c++/12.2.1/stdlib.h
alpine 3.18
/ # find / | grep stdlib.h
/usr/lib/llvm16/lib/clang/16/include/__clang_hip_stdlib.h
/usr/include/fortify/stdlib.h
/usr/include/c++/12.2.1/tr1/stdlib.h
/usr/include/c++/12.2.1/stdlib.h
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Unfortunately, the go1.21.4 security update exposed some regressions / breaking
changes in moby (docker engine) and containerd. These issues are looked into,
but in the meantime we should revert this patch.
This temporarily reintroduces CVE-2023-45284 and CVE-2023-45283.
This reverts commit 6472dabe4c.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath
package, as well as bug fixes to the linker, the runtime, the compiler, and
the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone
on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.3 (released 2023-10-10) includes a security fix to the net/http package.
See the Go 1.21.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.3+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.2...go1.21.3
From the security mailing:
[security] Go 1.21.3 and Go 1.20.10 are released
Hello gophers,
We have just released Go versions 1.21.3 and 1.20.10, minor point releases.
These minor releases include 1 security fixes following the security policy:
- net/http: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and
immediately resets them can cause excessive server resource consumption.
While the total number of requests is bounded to the
http2.Server.MaxConcurrentStreams setting, resetting an in-progress
request allows the attacker to create a new request while the existing
one is still executing.
HTTP/2 servers now bound the number of simultaneously executing
handler goroutines to the stream concurrency limit. New requests
arriving when at the limit (which can only happen after the client
has reset an existing, in-flight request) will be queued until a
handler exits. If the request queue grows too large, the server
will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 v0.17.0,
for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests)
per HTTP/2 connection. This value may be adjusted using the
golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams
setting and the ConfigureServer function.
This is CVE-2023-39325 and Go issue https://go.dev/issue/63417.
This is also tracked by CVE-2023-44487.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.2 (released 2023-10-05) includes one security fixes to the cmd/go package,
as well as bug fixes to the compiler, the go command, the linker, the runtime,
and the runtime/metrics package. See the Go 1.21.2 milestone on our issue
tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.2+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.1...go1.21.2
From the security mailing:
[security] Go 1.21.2 and Go 1.20.9 are released
Hello gophers,
We have just released Go versions 1.21.2 and 1.20.9, minor point releases.
These minor releases include 1 security fixes following the security policy:
- cmd/go: line directives allows arbitrary execution during build
"//line" directives can be used to bypass the restrictions on "//go:cgo_"
directives, allowing blocked linker and compiler flags to be passed during
compliation. This can result in unexpected execution of arbitrary code when
running "go build". The line directive requires the absolute path of the file in
which the directive lives, which makes exploting this issue significantly more
complex.
This is CVE-2023-39323 and Go issue https://go.dev/issue/63211.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This may find its way into the official images, but until it does, let's
make sure we don't get unexpected updates of go.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.8 (released 2023-09-06) includes two security fixes to the html/template
package, as well as bug fixes to the compiler, the go command, the runtime,
and the crypto/tls, go/types, net/http, and path/filepath packages. See the
Go 1.20.8 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.8+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.7...go1.20.8
From the security mailing:
[security] Go 1.21.1 and Go 1.20.8 are released
Hello gophers,
We have just released Go versions 1.21.1 and 1.20.8, minor point releases.
These minor releases include 4 security fixes following the security policy:
- cmd/go: go.mod toolchain directive allows arbitrary execution
The go.mod toolchain directive, introduced in Go 1.21, could be leveraged to
execute scripts and binaries relative to the root of the module when the "go"
command was executed within the module. This applies to modules downloaded using
the "go" command from the module proxy, as well as modules downloaded directly
using VCS software.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-39320 and Go issue https://go.dev/issue/62198.
- html/template: improper handling of HTML-like comments within script contexts
The html/template package did not properly handle HMTL-like "<!--" and "-->"
comment tokens, nor hashbang "#!" comment tokens, in <script> contexts. This may
cause the template parser to improperly interpret the contents of <script>
contexts, causing actions to be improperly escaped. This could be leveraged to
perform an XSS attack.
Thanks to Takeshi Kaneko (GMO Cybersecurity by Ierae, Inc.) for reporting this
issue.
This is CVE-2023-39318 and Go issue https://go.dev/issue/62196.
- html/template: improper handling of special tags within script contexts
The html/template package did not apply the proper rules for handling occurrences
of "<script", "<!--", and "</script" within JS literals in <script> contexts.
This may cause the template parser to improperly consider script contexts to be
terminated early, causing actions to be improperly escaped. This could be
leveraged to perform an XSS attack.
Thanks to Takeshi Kaneko (GMO Cybersecurity by Ierae, Inc.) for reporting this
issue.
This is CVE-2023-39319 and Go issue https://go.dev/issue/62197.
- crypto/tls: panic when processing post-handshake message on QUIC connections
Processing an incomplete post-handshake message for a QUIC connection caused a panic.
Thanks to Marten Seemann for reporting this issue.
This is CVE-2023-39321 and CVE-2023-39322 and Go issue https://go.dev/issue/62266.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Includes a fix for CVE-2023-29409
go1.20.7 (released 2023-08-01) includes a security fix to the crypto/tls
package, as well as bug fixes to the assembler and the compiler. See the
Go 1.20.7 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.20.7+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.20.6...go1.20.7
From the mailing list announcement:
[security] Go 1.20.7 and Go 1.19.12 are released
Hello gophers,
We have just released Go versions 1.20.7 and 1.19.12, minor point releases.
These minor releases include 1 security fixes following the security policy:
- crypto/tls: restrict RSA keys in certificates to <= 8192 bits
Extremely large RSA keys in certificate chains can cause a client/server
to expend significant CPU time verifying signatures. Limit this by
restricting the size of RSA keys transmitted during handshakes to <=
8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only
three certificates in circulation with keys larger than this, and all
three appear to be test certificates that are not actively deployed. It
is possible there are larger keys in use in private PKIs, but we target
the web PKI, so causing breakage here in the interests of increasing the
default safety of users of crypto/tls seems reasonable.
Thanks to Mateusz Poliwczak for reporting this issue.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.20.7
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.6 (released 2023-07-11) includes a security fix to the net/http package,
as well as bug fixes to the compiler, cgo, the cover tool, the go command,
the runtime, and the crypto/ecdsa, go/build, go/printer, net/mail, and text/template
packages. See the Go 1.20.6 milestone on our issue tracker for details.
https://github.com/golang/go/issues?q=milestone%3AGo1.20.6+label%3ACherryPickApproved
Full diff: https://github.com/golang/go/compare/go1.20.5...go1.20.6
These minor releases include 1 security fixes following the security policy:
net/http: insufficient sanitization of Host header
The HTTP/1 client did not fully validate the contents of the Host header.
A maliciously crafted Host header could inject additional headers or entire
requests. The HTTP/1 client now refuses to send requests containing an
invalid Request.Host or Request.URL.Host value.
Thanks to Bartek Nowotarski for reporting this issue.
Includes security fixes for [CVE-2023-29406 ][1] and Go issue https://go.dev/issue/60374
[1]: https://github.com/advisories/GHSA-f8f7-69v5-w4vx
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.5 (released 2023-06-06) includes four security fixes to the cmd/go and
runtime packages, as well as bug fixes to the compiler, the go command, the
runtime, and the crypto/rsa, net, and os packages. See the Go 1.20.5 milestone
on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.5+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.4...go1.20.5
These minor releases include 3 security fixes following the security policy:
- cmd/go: cgo code injection
The go command may generate unexpected code at build time when using cgo. This
may result in unexpected behavior when running a go program which uses cgo.
This may occur when running an untrusted module which contains directories with
newline characters in their names. Modules which are retrieved using the go command,
i.e. via "go get", are not affected (modules retrieved using GOPATH-mode, i.e.
GO111MODULE=off, may be affected).
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29402 and Go issue https://go.dev/issue/60167.
- runtime: unexpected behavior of setuid/setgid binaries
The Go runtime didn't act any differently when a binary had the setuid/setgid
bit set. On Unix platforms, if a setuid/setgid binary was executed with standard
I/O file descriptors closed, opening any files could result in unexpected
content being read/written with elevated prilieges. Similarly if a setuid/setgid
program was terminated, either via panic or signal, it could leak the contents
of its registers.
Thanks to Vincent Dehors from Synacktiv for reporting this issue.
This is CVE-2023-29403 and Go issue https://go.dev/issue/60272.
- cmd/go: improper sanitization of LDFLAGS
The go command may execute arbitrary code at build time when using cgo. This may
occur when running "go get" on a malicious module, or when running any other
command which builds untrusted code. This is can by triggered by linker flags,
specified via a "#cgo LDFLAGS" directive.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29404 and CVE-2023-29405 and Go issues https://go.dev/issue/60305 and https://go.dev/issue/60306.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Official Golang images are now only available for 3.18 and 3.17;
3.18 doesn't look to play well with gotestsum, so sticking to
an older version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the default proxy, to assist with vanity domains mis-behaving, but keep
a fallback for situations where we need to get modules from GitHub directly.
This should hopefully help with the gopkg.in/yaml.v2 domain often going AWOL;
#14 245.9 gopkg.in/yaml.v2@v2.4.0: unrecognized import path "gopkg.in/yaml.v2": reading https://gopkg.in/yaml.v2?go-get=1: 502 Bad Gateway
#14 245.9 server response: Cannot obtain refs from GitHub: cannot talk to GitHub: Get https://github.com/go-yaml/yaml.git/info/refs?service=git-upload-pack: write tcp 10.131.9.188:60820->140.82.121.3:443: write: broken pipe
curl 'https://gopkg.in/yaml.v2?go-get=1'
Cannot obtain refs from GitHub: cannot talk to GitHub: Get https://github.com/go-yaml/yaml.git/info/refs?service=git-upload-pack: write tcp 10.131.9.188:60820->140.82.121.3:443: write: broken pipe
From the Go documentation; https://go.dev/ref/mod#goproxy-protocol
> List elements may be separated by commas (,) or pipes (|), which determine error
> fallback behavior. When a URL is followed by a comma, the go command falls back
> to later sources only after a 404 (Not Found) or 410 (Gone) response. When a URL
> is followed by a pipe, the go command falls back to later sources after any error,
> including non-HTTP errors such as timeouts. This error handling behavior lets a
> proxy act as a gatekeeper for unknown modules. For example, a proxy could respond
> with error 403 (Forbidden) for modules not on an approved list (see Private proxy
> serving private modules).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.4 (released 2023-05-02) includes three security fixes to the html/template
package, as well as bug fixes to the compiler, the runtime, and the crypto/subtle,
crypto/tls, net/http, and syscall packages. See the Go 1.20.4 milestone on our
issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.4+label%3ACherryPickApproved
release notes: https://go.dev/doc/devel/release#go1.20.4
full diff: https://github.com/golang/go/compare/go1.20.3...go1.20.4
from the announcement:
> These minor releases include 3 security fixes following the security policy:
>
> - html/template: improper sanitization of CSS values
>
> Angle brackets (`<>`) were not considered dangerous characters when inserted
> into CSS contexts. Templates containing multiple actions separated by a '/'
> character could result in unexpectedly closing the CSS context and allowing
> for injection of unexpected HMTL, if executed with untrusted input.
>
> Thanks to Juho Nurminen of Mattermost for reporting this issue.
>
> This is CVE-2023-24539 and Go issue https://go.dev/issue/59720.
>
> - html/template: improper handling of JavaScript whitespace
>
> Not all valid JavaScript whitespace characters were considered to be
> whitespace. Templates containing whitespace characters outside of the character
> set "\t\n\f\r\u0020\u2028\u2029" in JavaScript contexts that also contain
> actions may not be properly sanitized during execution.
>
> Thanks to Juho Nurminen of Mattermost for reporting this issue.
>
> This is CVE-2023-24540 and Go issue https://go.dev/issue/59721.
>
> - html/template: improper handling of empty HTML attributes
>
> Templates containing actions in unquoted HTML attributes (e.g. "attr={{.}}")
> executed with empty input could result in output that would have unexpected
> results when parsed due to HTML normalization rules. This may allow injection
> of arbitrary attributes into tags.
>
> Thanks to Juho Nurminen of Mattermost for reporting this issue.
>
> This is CVE-2023-29400 and Go issue https://go.dev/issue/59722.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.3 (released 2023-04-04) includes security fixes to the go/parser,
html/template, mime/multipart, net/http, and net/textproto packages, as well
as bug fixes to the compiler, the linker, the runtime, and the time package.
See the Go 1.20.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.3+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.2...go1.20.3
Further details from the announcement on the mailing list:
We have just released Go versions 1.20.3 and 1.19.8, minor point releases.
These minor releases include 4 security fixes following the security policy:
- go/parser: infinite loop in parsing
Calling any of the Parse functions on Go source code which contains `//line`
directives with very large line numbers can cause an infinite loop due to
integer overflow.
Thanks to Philippe Antoine (Catena cyber) for reporting this issue.
This is CVE-2023-24537 and Go issue https://go.dev/issue/59180.
- html/template: backticks not treated as string delimiters
Templates did not properly consider backticks (`) as Javascript string
delimiters, and as such did not escape them as expected. Backticks are
used, since ES6, for JS template literals. If a template contained a Go
template action within a Javascript template literal, the contents of the
action could be used to terminate the literal, injecting arbitrary Javascript
code into the Go template.
As ES6 template literals are rather complex, and themselves can do string
interpolation, we've decided to simply disallow Go template actions from being
used inside of them (e.g. "var a = {{.}}"), since there is no obviously safe
way to allow this behavior. This takes the same approach as
github.com/google/safehtml. Template.Parse will now return an Error when it
encounters templates like this, with a currently unexported ErrorCode with a
value of 12. This ErrorCode will be exported in the next major release.
Users who rely on this behavior can re-enable it using the GODEBUG flag
jstmpllitinterp=1, with the caveat that backticks will now be escaped. This
should be used with caution.
Thanks to Sohom Datta, Manipal Institute of Technology, for reporting this issue.
This is CVE-2023-24538 and Go issue https://go.dev/issue/59234.
- net/http, net/textproto: denial of service from excessive memory allocation
HTTP and MIME header parsing could allocate large amounts of memory, even when
parsing small inputs.
Certain unusual patterns of input data could cause the common function used to
parse HTTP and MIME headers to allocate substantially more memory than
required to hold the parsed headers. An attacker can exploit this behavior to
cause an HTTP server to allocate large amounts of memory from a small request,
potentially leading to memory exhaustion and a denial of service.
Header parsing now correctly allocates only the memory required to hold parsed
headers.
Thanks to Jakob Ackermann (@das7pad) for discovering this issue.
This is CVE-2023-24534 and Go issue https://go.dev/issue/58975.
- net/http, net/textproto, mime/multipart: denial of service from excessive resource consumption
Multipart form parsing can consume large amounts of CPU and memory when
processing form inputs containing very large numbers of parts. This stems from
several causes:
mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form
can consume. ReadForm could undercount the amount of memory consumed, leading
it to accept larger inputs than intended. Limiting total memory does not
account for increased pressure on the garbage collector from large numbers of
small allocations in forms with many parts. ReadForm could allocate a large
number of short-lived buffers, further increasing pressure on the garbage
collector. The combination of these factors can permit an attacker to cause an
program that parses multipart forms to consume large amounts of CPU and
memory, potentially resulting in a denial of service. This affects programs
that use mime/multipart.Reader.ReadForm, as well as form parsing in the
net/http package with the Request methods FormFile, FormValue,
ParseMultipartForm, and PostFormValue.
ReadForm now does a better job of estimating the memory consumption of parsed
forms, and performs many fewer short-lived allocations.
In addition, mime/multipart.Reader now imposes the following limits on the
size of parsed forms:
Forms parsed with ReadForm may contain no more than 1000 parts. This limit may
be adjusted with the environment variable GODEBUG=multipartmaxparts=. Form
parts parsed with NextPart and NextRawPart may contain no more than 10,000
header fields. In addition, forms parsed with ReadForm may contain no more
than 10,000 header fields across all parts. This limit may be adjusted with
the environment variable GODEBUG=multipartmaxheaders=.
Thanks to Jakob Ackermann for discovering this issue.
This is CVE-2023-24536 and Go issue https://go.dev/issue/59153.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Includes security fixes for net/http (CVE-2022-41717, CVE-2022-41720),
and os (CVE-2022-41720).
These minor releases include 2 security fixes following the security policy:
- os, net/http: avoid escapes from os.DirFS and http.Dir on Windows
The os.DirFS function and http.Dir type provide access to a tree of files
rooted at a given directory. These functions permitted access to Windows
device files under that root. For example, os.DirFS("C:/tmp").Open("COM1")
would open the COM1 device.
Both os.DirFS and http.Dir only provide read-only filesystem access.
In addition, on Windows, an os.DirFS for the directory \(the root of the
current drive) can permit a maliciously crafted path to escape from the
drive and access any path on the system.
The behavior of os.DirFS("") has changed. Previously, an empty root was
treated equivalently to "/", so os.DirFS("").Open("tmp") would open the
path "/tmp". This now returns an error.
This is CVE-2022-41720 and Go issue https://go.dev/issue/56694.
- net/http: limit canonical header cache by bytes, not entries
An attacker can cause excessive memory growth in a Go server accepting
HTTP/2 requests.
HTTP/2 server connections contain a cache of HTTP header keys sent by
the client. While the total number of entries in this cache is capped,
an attacker sending very large keys can cause the server to allocate
approximately 64 MiB per open connection.
This issue is also fixed in golang.org/x/net/http2 vX.Y.Z, for users
manually configuring HTTP/2.
Thanks to Josselin Costanzi for reporting this issue.
This is CVE-2022-41717 and Go issue https://go.dev/issue/56350.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.19.4
And the milestone on the issue tracker:
https://github.com/golang/go/issues?q=milestone%3AGo1.19.4+label%3ACherryPickApproved
Full diff: https://github.com/golang/go/compare/go1.19.3...go1.19.4
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows us to pin to a specific version of Alpine, in case the
golang:alpine image switches to a newer version, which may at times
be incompatible, e.g. see https://github.com/moby/moby/issues/44570
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On Windows, syscall.StartProcess and os/exec.Cmd did not properly
check for invalid environment variable values. A malicious
environment variable value could exploit this behavior to set a
value for a different environment variable. For example, the
environment variable string "A=B\x00C=D" set the variables "A=B" and
"C=D".
Thanks to RyotaK (https://twitter.com/ryotkak) for reporting this
issue.
This is CVE-2022-41716 and Go issue https://go.dev/issue/56284.
This Go release also fixes https://github.com/golang/go/issues/56309, a
runtime bug which can cause random memory corruption when a goroutine
exits with runtime.LockOSThread() set. This fix is necessary to unblock
work to replace certain uses of pkg/reexec with unshared OS threads.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the mailing list:
We have just released Go versions 1.19.2 and 1.18.7, minor point releases.
These minor releases include 3 security fixes following the security policy:
- archive/tar: unbounded memory consumption when reading headers
Reader.Read did not set a limit on the maximum size of file headers.
A maliciously crafted archive could cause Read to allocate unbounded
amounts of memory, potentially causing resource exhaustion or panics.
Reader.Read now limits the maximum size of header blocks to 1 MiB.
Thanks to Adam Korczynski (ADA Logics) and OSS-Fuzz for reporting this issue.
This is CVE-2022-2879 and Go issue https://go.dev/issue/54853.
- net/http/httputil: ReverseProxy should not forward unparseable query parameters
Requests forwarded by ReverseProxy included the raw query parameters from the
inbound request, including unparseable parameters rejected by net/http. This
could permit query parameter smuggling when a Go proxy forwards a parameter
with an unparseable value.
ReverseProxy will now sanitize the query parameters in the forwarded query
when the outbound request's Form field is set after the ReverseProxy.Director
function returns, indicating that the proxy has parsed the query parameters.
Proxies which do not parse query parameters continue to forward the original
query parameters unchanged.
Thanks to Gal Goldstein (Security Researcher, Oxeye) and
Daniel Abeles (Head of Research, Oxeye) for reporting this issue.
This is CVE-2022-2880 and Go issue https://go.dev/issue/54663.
- regexp/syntax: limit memory used by parsing regexps
The parsed regexp representation is linear in the size of the input,
but in some cases the constant factor can be as high as 40,000,
making relatively small regexps consume much larger amounts of memory.
Each regexp being parsed is now limited to a 256 MB memory footprint.
Regular expressions whose representation would use more space than that
are now rejected. Normal use of regular expressions is unaffected.
Thanks to Adam Korczynski (ADA Logics) and OSS-Fuzz for reporting this issue.
This is CVE-2022-41715 and Go issue https://go.dev/issue/55949.
View the release notes for more information: https://go.dev/doc/devel/release#go1.19.2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the mailing list:
We have just released Go versions 1.19.1 and 1.18.6, minor point releases.
These minor releases include 2 security fixes following the security policy:
- net/http: handle server errors after sending GOAWAY
A closing HTTP/2 server connection could hang forever waiting for a clean
shutdown that was preempted by a subsequent fatal error. This failure mode
could be exploited to cause a denial of service.
Thanks to Bahruz Jabiyev, Tommaso Innocenti, Anthony Gavazzi, Steven Sprecher,
and Kaan Onarlioglu for reporting this.
This is CVE-2022-27664 and Go issue https://go.dev/issue/54658.
- net/url: JoinPath does not strip relative path components in all circumstances
JoinPath and URL.JoinPath would not remove `../` path components appended to a
relative path. For example, `JoinPath("https://go.dev", "../go")` returned the
URL `https://go.dev/../go`, despite the JoinPath documentation stating that
`../` path elements are cleaned from the result.
Thanks to q0jt for reporting this issue.
This is CVE-2022-32190 and Go issue https://go.dev/issue/54385.
Release notes:
go1.19.1 (released 2022-09-06) includes security fixes to the net/http and
net/url packages, as well as bug fixes to the compiler, the go command, the pprof
command, the linker, the runtime, and the crypto/tls and crypto/x509 packages.
See the Go 1.19.1 milestone on the issue tracker for details.
https://github.com/golang/go/issues?q=milestone%3AGo1.19.1+label%3ACherryPickApproved
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the mailing list:
We have just released Go versions 1.19.1 and 1.18.6, minor point releases.
These minor releases include 2 security fixes following the security policy:
- net/http: handle server errors after sending GOAWAY
A closing HTTP/2 server connection could hang forever waiting for a clean
shutdown that was preempted by a subsequent fatal error. This failure mode
could be exploited to cause a denial of service.
Thanks to Bahruz Jabiyev, Tommaso Innocenti, Anthony Gavazzi, Steven Sprecher,
and Kaan Onarlioglu for reporting this.
This is CVE-2022-27664 and Go issue https://go.dev/issue/54658.
- net/url: JoinPath does not strip relative path components in all circumstances
JoinPath and URL.JoinPath would not remove `../` path components appended to a
relative path. For example, `JoinPath("https://go.dev", "../go")` returned the
URL `https://go.dev/../go`, despite the JoinPath documentation stating that
`../` path elements are cleaned from the result.
Thanks to q0jt for reporting this issue.
This is CVE-2022-32190 and Go issue https://go.dev/issue/54385.
Release notes:
go1.18.6 (released 2022-09-06) includes security fixes to the net/http package,
as well as bug fixes to the compiler, the go command, the pprof command, the
runtime, and the crypto/tls, encoding/xml, and net packages. See the Go 1.18.6
milestone on the issue tracker for details;
https://github.com/golang/go/issues?q=milestone%3AGo1.18.6+label%3ACherryPickApproved
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Update Go runtime to 1.18.5 to address CVE-2022-32189.
Full diff: https://github.com/golang/go/compare/go1.18.4...go1.18.5
--------------------------------------------------------
From the security announcement:
https://groups.google.com/g/golang-announce/c/YqYYG87xB10
We have just released Go versions 1.18.5 and 1.17.13, minor point
releases.
These minor releases include 1 security fixes following the security
policy:
encoding/gob & math/big: decoding big.Float and big.Rat can panic
Decoding big.Float and big.Rat types can panic if the encoded message is
too short.
This is CVE-2022-32189 and Go issue https://go.dev/issue/53871.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.18.5
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.18.4 (released 2022-07-12) includes security fixes to the compress/gzip,
encoding/gob, encoding/xml, go/parser, io/fs, net/http, and path/filepath
packages, as well as bug fixes to the compiler, the go command, the linker,
the runtime, and the runtime/metrics package. See the Go 1.18.4 milestone on the
issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.18.4+label%3ACherryPickApproved
This update addresses:
CVE-2022-1705, CVE-2022-1962, CVE-2022-28131, CVE-2022-30630, CVE-2022-30631,
CVE-2022-30632, CVE-2022-30633, CVE-2022-30635, and CVE-2022-32148.
Full diff: https://github.com/golang/go/compare/go1.18.3...go1.18.4
From the security announcement;
https://groups.google.com/g/golang-announce/c/nqrv9fbR0zE
We have just released Go versions 1.18.4 and 1.17.12, minor point releases. These
minor releases include 9 security fixes following the security policy:
- net/http: improper sanitization of Transfer-Encoding header
The HTTP/1 client accepted some invalid Transfer-Encoding headers as indicating
a "chunked" encoding. This could potentially allow for request smuggling, but
only if combined with an intermediate server that also improperly failed to
reject the header as invalid.
This is CVE-2022-1705 and https://go.dev/issue/53188.
- When `httputil.ReverseProxy.ServeHTTP` was called with a `Request.Header` map
containing a nil value for the X-Forwarded-For header, ReverseProxy would set
the client IP as the value of the X-Forwarded-For header, contrary to its
documentation. In the more usual case where a Director function set the
X-Forwarded-For header value to nil, ReverseProxy would leave the header
unmodified as expected.
This is https://go.dev/issue/53423 and CVE-2022-32148.
Thanks to Christian Mehlmauer for reporting this issue.
- compress/gzip: stack exhaustion in Reader.Read
Calling Reader.Read on an archive containing a large number of concatenated
0-length compressed files can cause a panic due to stack exhaustion.
This is CVE-2022-30631 and Go issue https://go.dev/issue/53168.
- encoding/xml: stack exhaustion in Unmarshal
Calling Unmarshal on a XML document into a Go struct which has a nested field
that uses the any field tag can cause a panic due to stack exhaustion.
This is CVE-2022-30633 and Go issue https://go.dev/issue/53611.
- encoding/xml: stack exhaustion in Decoder.Skip
Calling Decoder.Skip when parsing a deeply nested XML document can cause a
panic due to stack exhaustion. The Go Security team discovered this issue, and
it was independently reported by Juho Nurminen of Mattermost.
This is CVE-2022-28131 and Go issue https://go.dev/issue/53614.
- encoding/gob: stack exhaustion in Decoder.Decode
Calling Decoder.Decode on a message which contains deeply nested structures
can cause a panic due to stack exhaustion.
This is CVE-2022-30635 and Go issue https://go.dev/issue/53615.
- path/filepath: stack exhaustion in Glob
Calling Glob on a path which contains a large number of path separators can
cause a panic due to stack exhaustion.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2022-30632 and Go issue https://go.dev/issue/53416.
- io/fs: stack exhaustion in Glob
Calling Glob on a path which contains a large number of path separators can
cause a panic due to stack exhaustion.
This is CVE-2022-30630 and Go issue https://go.dev/issue/53415.
- go/parser: stack exhaustion in all Parse* functions
Calling any of the Parse functions on Go source code which contains deeply
nested types or declarations can cause a panic due to stack exhaustion.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2022-1962 and Go issue https://go.dev/issue/53616.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.18.3 (released 2022-06-01) includes security fixes to the crypto/rand,
crypto/tls, os/exec, and path/filepath packages, as well as bug fixes to the
compiler, and the crypto/tls and text/template/parse packages. See the Go
1.18.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.18.3+label%3ACherryPickApproved
Hello gophers,
We have just released Go versions 1.18.3 and 1.17.11, minor point releases.
These minor releases include 4 security fixes following the security policy:
- crypto/rand: rand.Read hangs with extremely large buffers
On Windows, rand.Read will hang indefinitely if passed a buffer larger than
1 << 32 - 1 bytes.
Thanks to Davis Goodin and Quim Muntal, working at Microsoft on the Go toolset,
for reporting this issue.
This is [CVE-2022-30634][CVE-2022-30634] and Go issue https://go.dev/issue/52561.
- crypto/tls: session tickets lack random ticket_age_add
Session tickets generated by crypto/tls did not contain a randomly generated
ticket_age_add. This allows an attacker that can observe TLS handshakes to
correlate successive connections by comparing ticket ages during session
resumption.
Thanks to GitHub user nervuri for reporting this.
This is [CVE-2022-30629][CVE-2022-30629] and Go issue https://go.dev/issue/52814.
- `os/exec`: empty `Cmd.Path` can result in running unintended binary on Windows
If, on Windows, `Cmd.Run`, `cmd.Start`, `cmd.Output`, or `cmd.CombinedOutput`
are executed when Cmd.Path is unset and, in the working directory, there are
binaries named either "..com" or "..exe", they will be executed.
Thanks to Chris Darroch, brian m. carlson, and Mikhail Shcherbakov for reporting
this.
This is [CVE-2022-30580][CVE-2022-30580] and Go issue https://go.dev/issue/52574.
- `path/filepath`: Clean(`.\c:`) returns `c:` on Windows
On Windows, the `filepath.Clean` function could convert an invalid path to a
valid, absolute path. For example, Clean(`.\c:`) returned `c:`.
Thanks to Unrud for reporting this issue.
This is [CVE-2022-29804][CVE-2022-29804] and Go issue https://go.dev/issue/52476.
[CVE-2022-30634]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-30634
[CVE-2022-30629]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-30629
[CVE-2022-30580]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-30580
[CVE-2022-29804]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-29804
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removes the platform based switch between different versions.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now that HEREDOC is included in the stable Dockerfile syntax, we can
use the latest stable syntax for all Dockerfiles.
The recommendation for the stable syntax is to use `:1` (which is
equivalent to "latest" stable syntax.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While the module proxy can speed up vendoring, it may cause issues when
(temporarily) vendoring from a fork, because the proxy may not have the
module yet on first try, which causes vendoring to fail:
vendor.mod:95:2: replace github.com/thaJeztah/compose-on-kubernetes:
version "0b59cf047b3b0199048fe13fdcd21b0cb46549f2" invalid:
Get "0b59cf047b.info": read tcp 172.17.0.2:60290->172.217.168.209:443: read: connection reset by peer
Using `GOPROXY=direct` to fetch sources directly from upstream (GitHub) instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Paweł Gronowski
Sebastiaan van Stijn
CrazyMax
Tonis Tiigi